Commit graph

6875 commits

Author SHA1 Message Date
Simon Glass
0c5dd9ae2f dm: usb: Implement usb_detect_change() for driver model
Support this function with driver model also (CONFIG_DM_USB).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:54 -06:00
Simon Glass
a2879764ba dm: i2c: Add compatibility functions for dm_i2c_reg_read/write()
Add the legacy i2c_reg_read/write() functions to the compatibility layer
so that they can be used when CONFIG_DM_I2C_COMPAT is defined.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-06-10 19:26:54 -06:00
Simon Glass
acbf5bbfe9 tegra: lcd: Tidy up clock init
Use the correct function for clock init.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-09 09:56:14 -07:00
Simon Glass
20edd1ac7a tegra: spi: Support slow SPI rates
Use the oscillator as the source clock when we cannot achieve a low-enough
speed with the peripheral clock. This happens when we request 3MHz on a SPI
clock, for example.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-09 09:56:13 -07:00
Simon Glass
635c2515c3 tegra: spi: Drop the claim_bus() method to correct delays
At present the driver does not properly honour the requested SPI CS
deactivation delay since the SPI bus is changed in the claim_bus() method.

Everything the claim_bus() method does can be done when the device is probed
(setting the speed and mode) and at the start of a new transfer (where the
fifo_status is already cleared). So drop this method.

Also, until the delay is complete, we should not touch the bus, so make sure
that spi_cs_activate() is called before other things are done in the xfer()
method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-06-09 09:56:13 -07:00
Inha Song
075020abbf usb: f_mass_storage: sleep_thread: decrease the interval for check ctrlc()
This change decreases the interval of calls to:
- display busy indicator
- check ctrlc()
- check cable connection

By this change, breaking the UMS command is more easy on Odroid XU3.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2015-06-08 15:26:00 +02:00
Lukasz Majewski
a272c99d30 samsung: usb: phy: Support for DWC3 PHY
New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have
been added to u-boot to provide proper PHY handling at Exynos5 SoCs.

This code is used thereafter in the board_usb_init() call.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2015-06-08 15:25:44 +02:00
Tom Rini
4d80051b63 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-06-08 08:37:02 -04:00
Sanchayan Maity
60ed286453 usb: ehci-vf: Add weak function for board specific initialisation
Add a weak function board_ehci_hcd_init which can be used by the board
file for board specific initialisation.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-06-08 08:41:56 +02:00
Bhuvanchandra DV
d348a943e7 dm: gpio: vf610: Add GPIO driver support
Add GPIO driver support to Freescale VF610

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-08 08:41:54 +02:00
Bhuvanchandra DV
ae89bb0d36 dm: gpio: uclass: Add flag to control sequence numbering
Like SPI and I2C few GPIO controllers also have
multiple chip instances. This patch adds the
flag 'DM_UC_FLAG_SEQ_ALIAS' in gpio_uclass driver
to control device sequence numbering. By defalut
the dev->r_seq for gpio_uclass will alwalys
returns -1, which leads the gpio driver probe
failure when using the driver with device trees.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-06-08 08:41:54 +02:00
Nikhil Badola
19b17d1254 drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect
Return if USB_MAX_CONTROLLER_COUNT hence the index of the controller
to be initialised is incorrect

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
2015-06-07 15:46:02 +02:00
Tom Rini
290ac3bb1a Merge git://git.denx.de/u-boot-sunxi 2015-06-06 07:03:07 -04:00
Tom Rini
d85cd29133 Merge git://git.denx.de/u-boot-dm 2015-06-05 11:21:08 -04:00
Hans de Goede
a52783e11d sunxi: gpio: Add "allwinner,sun8i-a33-pinctrl"
Add "allwinner,sun8i-a33-pinctrl", this is used by the latest upstream
linux sunxi dts files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-04 14:11:55 +02:00
Hans de Goede
1c09fa38e0 sunxi: mmc: Enable pull-up on card-detect gpio pin
On some boards we need to enable the internal pull-up te reliable detect
that no card is inserted.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-06-04 14:08:28 +02:00
Simon Glass
2bb02e4fe2 dm: pci: Allow PCI bus numbering aliases
Commit 9cc36a2 'dm: core: Add a flag to control sequence numbering' changed
the default uclass behaviour to not support bus numbering. This is incorrect
for PCI and that commit should have enabled the flag for PCI.

Enable it so that PCI buses can be found and the 'pci' command works again.
Also add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:34:47 -06:00
Gabriel Huau
5318f18d2c x86: gpio: add pinctrl support from the device tree
Every pin can be configured now from the device tree. A dt-bindings
has been added to describe the different property available.

Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975
Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:32:08 -06:00
Bin Meng
04e3c4eb93 pci: Do not skip legacy IDE device configuration
The legacy IDE device has a BAR4 (Bus Master Interface BAR) which
needs to be configured.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
1b73b1c7fb pci: Allow debug message output in pci_auto.c
Remove the '#undef DEBUG' in pci_auto.c so that we can enable debug
message output via '-DDEBUG'.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
6bde2dc5e2 x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig
CONFIG_FRAMEBUFFER_SET_VESA_MODE and CONFIG_FRAMEBUFFER_VESA_MODE
are not x86-specific, so move them to drivers/video/Kconfig and
make them depend on VIDEO_VESA driver. Some cosmetic fixes are
applied to the Kconfig help text as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:38 -06:00
Bin Meng
b82a535c3a video: Kconfig: Make VESA driver avaiable for non-x86 boards
There is no reason to prevent CONFIG_VIDEO_VESA driver working on
non-x86 boards, so remove such limitation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:38 -06:00
Bin Meng
238fe16c40 pci: Move pci_hose_phys_to_bus() to pci_common.c
pci_hose_phys_to_bus() is needed by several drivers. Move it to
pci_common.c to avoid a broken build when CONFIG_DM_PCI is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:38 -06:00
Tom Rini
43b1ff5f33 Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2015-05-30 20:16:01 -04:00
Tom Rini
b1f7ecc9b5 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-05-30 20:15:59 -04:00
Masahiro Yamada
b6ef3a3f04 ARM: UniPhier: update the vendor name of UniPhier in Kconfig
The business for UniPhier Soc family has been transferred from
Panasonic Corporation to Socionext Inc.

Update the SoC select menu in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:55:30 +09:00
Masahiro Yamada
f6e7f07c17 ARM: UniPhier: replace <asm/io.h> with <linux/io.h>
In the Linux coding style, it is recommended to include <linux/io.h>
rather than <asm/io.h>.  Follow this trend.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:53:56 +09:00
Daniel Kochmański
f76eba38b3 sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory
This commit adds support to the sunxi SPL to load u-boot from the internal
NAND. Note this only adds support to access the boot partitions to load
u-boot, full NAND support to load the kernel, etc. from the nand data
partition will come later.

Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29 13:46:36 +02:00
Tom Rini
cac6d4bfdc Merge git://git.denx.de/u-boot-usb 2015-05-29 07:31:38 -04:00
Peter Griffin
5cfd6c002a usb: dwc2: Add support for v3 snpsid value
This has been tested to the extent that I can enumerate
a asix usb networking adapter and boot a kernel over usb
on the 96boards hikey u-boot port I'm currently doing.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2015-05-29 12:41:04 +02:00
Siva Durga Prasad Paladugu
6a13241635 ci_udc: Update the ci_udc driver to support bulk transfers
Update the ci_udc driver to support bulk transfer
and also added capability of having multiple dtds
if requested data is more than 16K.
These changes are tested for both the DFU and lthor.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-05-29 12:41:04 +02:00
Hannes Schmelzer
4c302b9a65 cosmetic: change Author/MAINTAINER Name from Petermaier to Schmelzer
Since i've been married, i also have a new surname.
Mr. Petermaier moved to Mr. Schmelzer.

In this patch i update all files in which my (old) name is present.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-05-28 11:17:48 -04:00
Tang Yuantian
14f66d65a3 fsl/sata: Replace sprintf() with snprintf()
Function 'sprintf' does not check buffer boundaries but outputs
to the buffer of fixed size which could potentially cause buffer
overflow. Use a safer function to replace it.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
2015-05-28 08:18:24 -04:00
Matt Porter
0144caf22c gpio: stm32: add stm32f1 support
Add support for the STM32F1 family to the STM32 gpio driver.

Signed-off-by: Matt Porter <mporter@konsulko.com>
2015-05-28 08:18:24 -04:00
Tim Harvey
378b02d7ed pci: imx: display message if no pcie link
If CONFIG_PCI_SCAN_SHOW enabled then lets print a message of no link was
detected.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-28 12:01:44 +02:00
Tim Harvey
0373a7e91b pci: display header for bus scan
If we are displaying detected PCI devices (CONFIG_PCI_SCAN_SHOW) display
a 'PCI:' header prior to scan.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-27 13:35:54 -04:00
Tom Rini
445614cc2f Revert "Revert "stm32f4: fix serial output""
Due to a misunderstanding, in 698a12b we reverted changes that we in
fact wanted to keep.  So lets fix that mistake and bring the code back
to how it should have been.

This reverts commit 698a12bef9.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-27 13:24:10 -04:00
Tom Rini
9bea236b34 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-05-26 10:38:01 -04:00
Tim Harvey
be56de6f33 thermal: imx_thermal: increase critical temperature threshold
The CPU temperature grade from OTP is now used to define the critical
threshold at which point we busyloop until we are below, however this
threshold is still too low.

Instead of 20C below the max CPU temperature, change it to 5C defined now
by TEMPERATURE_HOT_DETLA for clarity. Rename 'passive' to 'critical'
as that better defines our use case here. Additionally change the output
of the busyloop message to show the max CPU temperature as well as current.

Before:
CPU Temperature is 101 C, too hot to boot, waiting...
CPU Temperature is 101 C, too hot to boot, waiting...

After:
CPU Temperature (101C) too close to max (105C) waiting...
CPU Temperature (101C) too close to max (105C) waiting...

Cc: Stefan Roese <sr@denx.de>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Cc: Jason Liu <r64343@freescale.com>
Cc: Ye Li <b37916@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Peng Fan <b51431@freescale.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 14:21:25 +02:00
Heiko Schocher
e6c8b716c7 i2c, mxc: rework i2c base address names for different SoCs
rework and unify i2c address names for different SoCs, which
use the mxc_i2c driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-05-26 14:17:00 +02:00
Heiko Schocher
21a26940f9 arm, imx6, i2c: add I2C4 for MX6DL
add I2C4 modul for MX6DL based boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-05-26 14:16:54 +02:00
Axel Lin
48dbc74ea5 pwm: imx: Remove unreachable code
The break after return is unreachable code, remove it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-05-26 14:13:12 +02:00
Axel Lin
16b0c0ce83 pwm: imx: Prevent NULL pointer dereference
pwm_id_to_reg() can return NULL, so add NULL testing to prevent NULL pointer
dereference.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-05-26 14:13:09 +02:00
Stefan Agner
8fca2d8cb8 mtd: vf610_nfc: enable ONFI detection
This changes enable ONFI detection. The Read ID command now allows
one address byte which is needed for ONFI detection. To read the
ONFI parameter page, the NAND_CMD_PARAM need to be supported. The
CMD code enables one command and one address byte along with reading
data from flash using R/B#, as specified by ONFI.

Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:27:46 -05:00
Stefan Agner
080a71e8e9 mtd: vf610_nfc: add 32-error correction option for HW ECC
Add option to choose between current 24-error correction and 32-error
correction through Kconfig. 32-error correction allow to use NAND
chips which require up to 8-bit error correction per 512 byte (when
using 2K pages).

Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:27:46 -05:00
Stefan Agner
5519194d4f mtd: vf610_nfc: add Freescale NFC controller configs to Kconfig
This commit allows users to enable/disable the Freescale NFC
controller found in systems like Vybrid (VF610), MPC5125, MCF54418
or Kinetis K70 via Kconfig with more detailed help docs.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Stefano Babic <sbabic@denx.de>
[scottwood: updated vf610twr_nand_defconfig]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-05-24 14:27:28 -05:00
Stefan Agner
84d656a283 mtd: vf610_nfc: use in-band bad block table
Use in-band bad block table (NAND_BBT_NO_OOB) which allows to
use the full OOB for hardare ECC purposes. Since there is no
ECC correction on the OOB it is also safer to use in-band area
to store the bad block table marker.

Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:26:55 -05:00
Stefan Agner
5dec286b82 mtd: vf610_nfc: implement OOB only read
Implement read of OOB area only. When using column and sector size
properties, only parts of the page can be read. However, this works
only when hardware ECC is disabled, otherwise the ECC engine would
ruin the data in the buffer. To allow OOB only reads, three points
had to be addressed:
- Set ECC mode per command.
- Handle NAND_CMD_READOOB seperate. Make sure column and sector
  size is correctly set up, while disabling ECC.
- Now, the OOB data end up at the beginning of the buffer. Remove
  the special handling of OOB (spareonly).

Especially bad block scans benefit from this change. On a 512MiB
SLC NAND device, the bad block scan took 1.5s less than before.

Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:26:55 -05:00
Stefan Agner
d111bf99a8 mtd: vf610_nfc: allow bitflips in an empty page
Allow bit flips in a empty page up to half of the recoverable
bits (strength / 2).

Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:26:54 -05:00
Stefan Agner
6fcfd1e890 mtd: vf610_nfc: remove read on SEQIN
Since we do not support sub-page writes anyway, reading the page
back to the controller on SEQIN command is not required. Remove
the page read on SEQIN.

However, the column/page values relevant to the SEQIN command, hence
set the column/row address on SEQIN command.

Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:26:54 -05:00
Stefan Agner
f55bc296a8 mtd: vf610_nfc: remove caching of page in buffer
To improve performance we remember the current page in the buffer
and avoid reading it twice. This implicit page cache increases
complexity while does not increase performance in real world cases.
This patch removes that feature.

Acked-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
2015-05-24 14:26:54 -05:00
Jörg Krause
1fbdb70610 mtd: nand: mxs: Replace magic number for bits per ECC level with macro
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-24 14:26:54 -05:00
Peng Fan
bd38da1a55 mtd:mxs:nand calculate ecc strength dynamically
Calculate ecc strength according oobsize, but not hardcoded
which is not aligned with kernel driver

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <b37916@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
2015-05-24 14:26:54 -05:00
Raghav Dogra
6b8583b0ad nand/elbc: Memory leak fix
Freeing allocated memory to priv before returning
from the function

Signed-off-by: Raghav Dogra <raghav@freescale.com>
[scottwood: removed unnecessary cast]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-05-22 15:45:51 -05:00
Stephen Warren
5e856fa8be nand: fix buffer alignment in new verification feature
On systems with caches enabled, NAND I/O may need to flush/invalidate
the cache during read/write operations. For this to work correctly, all
buffers must be cache-aligned. Fix nand_verify*() to allocate aligned
buffers.

This prevents cache alignment warnings from being spewed when using
U-Boot to write an updated version of itself to flash on NVIDIA Tegra
Seaboard (after perturbation of stack/data layout in current
u-boot-dm/next branch).

I have validatd (executed) nand_verify(), but I don't think I've executed
nand_verify_page_oob(); testing of that would be useful.

Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Fixes: 59b5a2ad83 ("nand: Add verification functions")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Scott Wood <scottwood@freescale.com>
2015-05-21 14:24:36 -05:00
Tom Rini
3238639d40 Merge git://git.denx.de/u-boot-net 2015-05-20 15:57:55 -04:00
Joe Hershberger
76ec988b06 net: Remove all calls to net_random_ethaddr()
Remove the calls to net_random_ethaddr() that some boards and some
drivers are calling. This is now implemented inside of net/eth.c

Enable the feature for all boards that previously enabled it.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-By: Michael Walle <michael@walle.cc> (for the lsxl board part)

Series-changes: 2
-Fixed bfin build errors
2015-05-20 11:07:27 -05:00
Joe Hershberger
92ac520821 net: Remove all references to CONFIG_ETHADDR and friends
We really don't want boards defining fixed MAC addresses in their config
so we just remove the option to set it in a fixed way. If you must have
a MAC address that was not provisioned, then use the random MAC address
functionality.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-19 13:33:21 -05:00
Michal Simek
abbfcbe58e net: phy: Add support for all targets which requires MANUAL_RELOC
Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA
relocation (mostly only GOT) where functions aray are not
updated. This patch is fixing function pointers passed to phy_register
function.
This patch was tested on Microblaze architecture.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19 13:33:21 -05:00
Shengzhou Liu
793ea94770 net/phy: refactor RTL8211F initialization
RTL8211F needs to enalbe TXDLY for RGMII during
phy initialization, so move it to rtl8211f_config
for early initialization.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19 13:33:21 -05:00
Joe Hershberger
f566c9949f net: Update hardware MAC address if it changes in env
When the ethaddr changes in the env, the hardware should also be updated
so that MAC filtering will work properly without resetting U-Boot.

Also remove the manual calls to set the hwaddr that was included in a
few drivers as a result of the framework not doing it.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-05-19 13:33:21 -05:00
Shengzhou Liu
3d6af748eb net/phy: Add support for realtek RTL8211F
RTL8211F has different registers from RTL8211E.
This patch adds support for RTL8211F PHY which
can be found on Freescale's T1023 RDB board.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19 13:33:20 -05:00
Hans de Goede
83edb2ace6 sunxi: video: Fix lvds panel support for sun6i+
We've never tested the lvds panel support on sun6i+ SoCs until now, and
unsurprisingly the lvds code needed some fixes to work on my ga10h A33
tablet with lvds panel. This makes the panel on that tablet actually work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-19 18:46:44 +02:00
Tim Harvey
a91db95479 thermal: imx_thermal: use CPU temperature grade for trip points
Replace the hard-coded values for min/max/passive with values derived from
the CPU temperature grade.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:31:49 +02:00
Tom Rini
0e6b7a2824 Merge git://git.denx.de/u-boot-samsung 2015-05-18 09:15:15 -04:00
Brecht Neyrinck
b2580877b5 bugfix i.mx6 pwm: prevent overflow of period_c * duty_ns
Prevent overflow by casting duty_ns to ull first. This bug came up when trying to create a 200 Hz PWM

Signed-off-by: Brecht Neyrinck <bnrn@psicontrol.com>
Acked-by: Heiko Schocher<hs@denx.de>
2015-05-15 19:20:47 +02:00
Przemyslaw Marczak
5d387d0df9 sandbox: add: sandbox PMIC device drivers: I2C emul, pmic, regulator
This commit adds emulation of sandbox PMIC device, which includes:
- PMIC I2C emulation driver
- PMIC I/O driver (UCLASS_PMIC)
- PMIC regulator driver (UCLASS_REGULATOR)

The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes,
which allows using 'i2c md' command with the default count (16).

The sandbox PMIC provides regulators:
- 2x BUCK
- 2x LDO

Each, with adjustable output:
- Enable state
- Voltage
- Current limit (LDO1/BUCK1 only)
- Operation mode (different for BUCK and LDO)

Each attribute has it's own register, beside the enable state, which depends
on operation mode.

The header file: sandbox_pmic.h includes PMIC's default register values,
which are set on i2c pmic emul driver's probe() method.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
a989ec8dd4 sandbox: i2c: search child emul dev and check its uclass id
The function get_emul() in sandbox i2c bus driver, always returns
first child as i2c emul device. This may only work for i2c devices
with a single child, which is an only i2c emul device.

In case when i2c device has more than one child (e.g. PMIC), and
one is i2c emul, then the function should search it by check uclass
id for each child. This patch add this change to the get_emul().

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
3b880757ab dm: regulator: uclass driver code cleanup
This cleanup includes:
- remove of the preprocessor macros which pointed to long name functions
- update of the names of some regulator uclass driver functions
- cleanup of the function regulator_autoset()
- reword of some comments of regulator uclass header file
- regulator_get_by_platname: check error for uclass_find_* function calls
- add function: regulator_name_is_unique
- regulator post_bind(): check regulator name uniqueness
- fix mistakes in: regulator/Kconfig
- regulator.h: update comments
- odroid u3: cleanup the regulator calls

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
f415a3ec9d dm: pmic: code cleanup of PMIC uclass driver
The cleanup includes:
- pmic.h - fix mistakes in a few comments
- pmic operations: value 'reg_count' - redefine as function call
- fix function name: pmic_bind_childs() -> pmic_bind_children()
- pmic_bind_children: change the 'while' loop with the 'for'
- add implementation of pmic_reg_count() method
- pmic_bind_children() - update function call name
- Kconfig: add new line at the end of file
- Update MAX77686 driver code

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Przemyslaw Marczak
9923a8b450 dm: regulator: add fixed voltage regulator driver
This driver implements regulator operations for fixed Voltage/Current
value regulators. beside the standard regulator constraints, which are
put into the uclass platform data, a typical fixed regulator node provides
few additional properties like:
- gpio
- gpio-open-drain
- enable-active-high
- startup-delay-us
The only 'gpio' is used by this driver and is kept in structure of type
'fixed_regulator_platdata', as a device platform data (dev->platdata).

The driver implements:
- get_value
- get_current
- get_enable
- set_enable

The regulator calls and commands can be used for fixed-regulator devices,
and the proper error will be returned for prohibited.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:38 -06:00
Przemyslaw Marczak
1757df4693 dm: regulator: add max77686 regulator driver
This commit adds support to MAX77686 regulator driver,
based on a driver model regulator's API. It implements
almost all regulator operations, beside those for setting
and geting the Current value.
For proper bind and operation it requires the MAX77686 PMIC driver.

New file: drivers/power/regulator/max77686.c
New config: CONFIG_DM_REGULATOR_MAX77686

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:38 -06:00
Przemyslaw Marczak
52a3de5e12 dm: pmic: add max77686 pmic driver
This is the implementation of driver model PMIC driver.
The max77686 PMIC driver implements read/write operations and driver
bind method - to bind its childs.

This driver will try to bind the regulator devices by using it's child
info array with regulator prefixes and driver names. This should succeed
when compatible regulator driver is compiled. If no regulator driver found,
then the pmic can still provide read/write operations, and can be used with
PMIC function calls.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:38 -06:00
Przemyslaw Marczak
af41e8db26 dm: regulator: add implementation of driver model regulator uclass
This commit introduces the implementation of dm regulator API.
Device tree support allows for auto binding. And by the basic
uclass operations, it allows to driving the devices in a common
way. For detailed informations, please look into the header file.

Core files:
- drivers/power/regulator-uclass.c - provides regulator common functions api
- include/power/regulator.h - define all structures required by the regulator

Changes:
- new uclass-id: UCLASS_REGULATOR
- new config: CONFIG_DM_REGULATOR

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:37 -06:00
Przemyslaw Marczak
4d9057e82b dm: pmic: add implementation of driver model pmic uclass
This commit introduces the PMIC uclass implementation.
It allows providing the basic I/O interface for PMIC devices.
For the multi-function PMIC devices, this can be used as I/O
parent device, for each IC's interface. Then, each PMIC particular
function can be provided by the child device's operations, and the
child devices will use its parent for read/write by the common API.

Core files:
- 'include/power/pmic.h'
- 'drivers/power/pmic/pmic-uclass.c'

The old pmic framework is still kept and is independent.

For more detailed informations, please look into the header file.

Changes:
- new uclass-id: UCLASS_PMIC
- new config: CONFIG_DM_PMIC

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:37 -06:00
Peng Fan
71204e95ce i2c: mxc: refactor i2c driver and support dm
1. Introduce a new structure `struct mxc_i2c_bus`, this structure will
   used for non-DM and DM.
2. Remove `struct mxc_i2c_regs` structure, but use register offset to access
   registers based on `base` entry of `struct mxc_i2c_bus`.
3. Remove most `#ifdef I2C_QUIRK_REG`. Using driver_data to contain platform
   flags. A new flag is introduced, I2C_QUIRK_FLAG.
4. Most functions use `struct mxc_i2c_bus` as one of the parameters.
   Make most functions common to DM and non-DM, try to avoid duplicated code.
5. Support DM, but pinctrl is not included. Pinmux setting is still set
   by setup_i2c, but we do not need bus_i2c_init for DM.
6. struct i2c_parms and struct sram_data are removed.
7. Remove bus_i2c_read bus_i2c_write prototype in header file. The frist
   paramter of bus_i2c_init is modified to i2c index. Add new prototype
   i2c_idle_bus and force_bus_idle. Since bus_i2c_init is not good for
   DM I2C and pinctrl is missed, we use a weak function for i2c_idle_bus.
   Board file take the responsibility to implement this function, like this:
   "
   int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
   {
	   if (i2c_bus->index == 0)
		   force_bus_idle(i2c_pads_info0);
	   else if (i2c_bus->index == 1)
		   force_bus_idle(i2c_pads_info1);
	   else
		   xxxxxx
   }
   "
8. Introduce a weak function, enable_i2c_clk
9. Tested on an i.MX7 platform. Log info:
 => dm tree
 Class       Probed   Name
 ----------------------------------------
 root        [ + ]    root_driver
 simple_bus  [   ]    |-- soc
 simple_bus  [   ]    |   |-- aips-bus@30000000
 simple_bus  [   ]    |   |   |-- anatop@30360000
 simple_bus  [   ]    |   |   `-- snvs@30370000
 simple_bus  [   ]    |   |-- aips-bus@30400000
 simple_bus  [   ]    |   `-- aips-bus@30800000
 i2c         [   ]    |       |-- i2c@30a20000
 i2c         [   ]    |       `-- i2c@30a40000
 simple_bus  [   ]    `-- regulators
 => i2c dev 0
 Setting bus to 0
 => i2c probe
 Valid chip addresses: 08 50
 => i2c md 8 31
 0031: 08 08 08 08 08 08 08 08 08 08 08 08 08 08 08 08

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:36 -06:00
Hans de Goede
bf495712ed usb: ohci: Add support for interrupt queues
Add support for interrupt queues to the ohci hcd code, bringing it inline
with the ehci and musb-new(host) code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:35 -06:00
Hans de Goede
d563e62c34 usb: ohci: Add an ohci_alloc_urb() function
Add an ohci_alloc_urb() function, this is a preparation patch for adding
interrupt queue support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:35 -06:00
Hans de Goede
44dbc33056 usb: ohci: Do not reuse ed for interrupt endpoints of different devices
When submitting interrupt packets to an endpoint we only link in the ed
once to avoid some races surrounding unlinking of periodic endpoints,
but we share one ohci_device struct / one set of ed-s for all devices,
which means that if we have an interrupt endpoint at endpoint 1 with one
device, and a non interrupt endpoint 1 with another device we end up
with the same ed linked into both the periodic and async lists, which is
not good (tm).

This commit switches over to using separate ohci_device structs, and thus
separate ed-s for devices with interrupt endpoints, fixing this.

This fixes e.g. matching a usb storage device and keyboard on the same
usb-1 hub not working.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:35 -06:00
Simon Glass
832adb212e sandbox: spi: Add newline to printf() in sandbox_sf_probe
This printf() should have a newline at the end. Add it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-05-14 18:49:35 -06:00
Simon Glass
b527924954 sandbox: cros_ec: Support EC_CMD_ENTERING_MODE emulation
Emualate this function which is used with Chrome OS verified boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:34 -06:00
Simon Glass
3806882042 sandbox: Add missing errno.h includes in a few files
These files use error numbering, so add the include.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:34 -06:00
Simon Glass
f90acf1ad0 tpm: Support using driver model with I2C
As a first step towards converting the TPM system to driver model, allow it
to work with CONFIG_DM_I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:33 -06:00
Simon Glass
01501804fd dm: i2c: Add a function to find out the chip offset length
We can currently set this but there is no API function to get it. Add one.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Heiko Schocher<hs@denx.de>
2015-05-14 18:49:33 -06:00
Hans de Goede
6a72e804a2 sunxi: ohci: Add ohci usb host controller support
This commit adds support for the OHCI companion controller, which makes
usb-1 devices directly plugged into to usb root port work.

Note for now this switches usb-keyboard support for sunxi back from int-queue
support to the old interrupt polling method. Adding int-queue support to the
ohci code and switching back to int-queue support is in the works.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-14 18:49:32 -06:00
Hans de Goede
8d837a1f7d sunxi: ehci: Convert to the driver-model
Convert sunxi-boards which use the sunxi-ehci code to the driver-model.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-14 18:49:32 -06:00
Hans de Goede
58b4048f64 usb: ohci: Add dm support
Add driver-model support to the ohci code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:32 -06:00
Hans de Goede
8f761f023c usb: ohci: Skip unnecessary mdelay(1) calls in various places
For some reason the ohci code is full with:

 #ifdef DEBUG
		pkt_print(...)
 #else
		mdelay(1);
 #endif

AFAICT there is no reason for the mdelay(1) calls. This commit disables them
when building the ohci code for new driver-model using boards. It leaves
the mdelay(1) calls in place when building for older boards, so as to avoid
causing any regressions there.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:32 -06:00
Hans de Goede
969bb5bad3 usb: ohci: Remove unnecessary delays from hc_start and power power-on paths
The usb spec says that we must wait a minimum amount of time after port
power on (exact time is in the hub descriptor), this is something which
we must not only do for root ports but also for external hub ports, which
is why the common usb_hub code already waits a full second after powering
up ports. Having a separate wait for just the root hub in the ohci-hcd
code only leads to doing the waiting twice for the root ports, so drop the
wait from the ohci-hcd code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:32 -06:00
Hans de Goede
47976d2c16 usb: ohci: Do not resubmit and leak urbs for interrupt packets
The u-boot usb code uses polling for all endpoints, including interrupt
endpoints, so urbs should never be automatically resubmitted.

This also fixes a leak of the urb, as submit_int_msg() did not check if
an already re-submitted urb exists before creating a new one.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:32 -06:00
Hans de Goede
e253637be7 dm: usb: Do not scan companion buses if no devices where handed over
USB scanning is slow, and there is no need to scan the companion buses
if no usb devices where handed over to the companinon controllers by any
of the main controllers.

This saves e.g. 2 seconds when booting a A10 OLinuxIno Lime with no USB-1
devices plugged into the root usb ports.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
b6de4d1093 dm: usb: Add support for companion controllers
USB companion controllers must be scanned after the main controller has
been scanned, so that any devices which the main controller which to hand
over to the companion have actually been handed over before we scan the
companion.

As there are no guarantees that this will magically happen in the right
order, split the scanning of the buses in 2 phases, first main controllers,
and then companion controllers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
a24a0e9159 dm: usb: Move printing of usb scan status to usb_scan_bus()
Move printing of usb scan status to usb_scan_bus().

This is a preparation patch for adding companion controller support to the
usb uclass.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
8a5f0665da dm: usb: Add support for interrupt queues to the dm usb code
Interrupt endpoints typically are polled for a long time by the usb
controller before they return anything, so calls to submit_int_msg() can
take a long time to complete this.

To avoid this the u-boot code has the an interrupt queue mechanism / API,
add support for this to the driver-model usb code and implement it for the
dm ehci code.

See the added doc comments for more details.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
029fd8ea1f dm: usb: Prefix ehci interrupt-queue functions with _ehci_
This is a preparation patch for adding interrupt-queue support to the
ehci dm code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
45b9ea1da2 usb: Stop reset procedure when a dev is handed over to a companion hcd
Short circuit the retry loop in legacy_hub_port_reset() by returning an
error from usb_control_msg() when a device was handed over to a companion
by the ehci code. This avoids trying to reset low / fullspeed devices 5
times needlessly. Also do not print an error when a device has been handed
over.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:31 -06:00
Hans de Goede
71b945267d usb: Fix handover of full-speed devices from ehci to companion
When after a reset the port status connection bit is still set and the enable
bit is not then we're dealing with a full-speed device and should hand it over
to the companion controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:30 -06:00
Simon Glass
dedc44b466 tegra124: video: Add full link training for eDP
Add full link training as a fallback in case the fast link training
fails.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:12 -07:00
Simon Glass
e7e8823c7c tegra: video: support eDP displays on Tegra124 devices
Connect up the clocks and the eDP driver to make these displays work with
Tegra124-based devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:11 -07:00
Simon Glass
59dd5aa8fa tegra: video: Add Embedded DisplayPort driver
This interface is used on laptop devices based on Tegra. Add a driver which
provides access to the eDP interface. The driver uses the display port
uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:11 -07:00