Commit graph

82839 commits

Author SHA1 Message Date
Stefano Babic
8fc220d0a6 Revert "imx: imx8: apalis: switch to binman"
This reverts commit b8072ae848.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-11-21 09:23:00 -05:00
Pali Rohár
60d7820093 Revert "cli_readline: Only insert printable chars"
This reverts commit d2e64d29c4.

This commit broke support for pound sign (£) and euro sign (€) keys on
Nokia N900 keypad.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-21 09:23:00 -05:00
Pali Rohár
9c41c06069 Nokia RX-51: Do not overwrite standard $loadaddr variable
Instead of overwriting $loadaddr variable, use custom temporary
$fileloadaddr variable. So scripts can access default/original address
stored in $loadaddr at build time.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-11-21 09:23:00 -05:00
Pali Rohár
9c2d4057e1 Nokia RX-51: Document debugging options and compile command
Add example command how to compile U-Boot and add new documentation section
describing how to enable early debug UART and verbose log output for N900.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-11-21 09:23:00 -05:00
Pali Rohár
04bb5e95be arm32: Fix relocation of env_addr if POSITION_INDEPENDENT=y
Apply commit 534f0fbd65 ("arm64: Fix relocation of env_addr if
POSITION_INDEPENDENT=y") also for 32-bit ARM.

This change fixes crashing of U-Boot on ARMv7 (Omap3 / Cortex-A8) Nokia N900
phone (real HW). Note that qemu emulator of this board with same u-boot.bin
binary has not triggered this crash.

Crash happened after U-Boot printed following debug lines to serial console:

    initcall: 0001ea8c (relocated to 8fe0aa8c)
    Loading Environment from <NULL>... Using default environment
    Destroy Hash Table: 8fe25a98 table = 00000000
    Create Hash Table: N=387

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-11-21 09:23:00 -05:00
Pali Rohár
2827c2f07d Fix usage of CONFIG_PREBOOT
Due to usage of PREBOOT in Kconfig, macro CONFIG_PREBOOT is always defined
when CONFIG_USE_PREBOOT is enabled. In case CONFIG_PREBOOT is not
explicitly enabled it is set to empty C string and therefore
'#ifdef CONFIG_PREBOOT' guard does not work. Fix this issue by introducing
a new Kconfig symbol PREBOOT_DEFINED which cause to define new C macro
CONFIG_PREBOOT_DEFINED only when CONFIG_PREBOOT is really defined.

Change usage of '#ifdef CONFIG_PREBOOT' by '#ifdef CONFIG_USE_PREBOOT' for
code which checks if preboot code would be called and by
'#ifdef CONFIG_PREBOOT_DEFINED' for defining preboot code.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-11-21 09:23:00 -05:00
Tom Rini
bebb393b34 Pull request for efi-2023-01-rc2
Documentation:
 
 * fix building with Sphinx 5.0+
 * man-pages for cmp and bootd commands
 
 UEFI:
 
 * Avoid unaligned access in efi_file_from_path()
 * More bug fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmN0od4ACgkQxIHbvCwF
 GsTLVA/+Ign2/NPOeFfzvWE+9CRhZgAMDqYB0NYsPc1q/xWDNYwn/qt8s52m/TDX
 HtlWKgH8dZ7DGP4TN9pTYRNrkQeNF60mGAvW2zUQJjh5y801f4v0VZz2O2SqDU3W
 69K33nMktL2ScD+ZuvusN4HwxHnE8xuHefM4Wqrm6MfWFiOsuiq1k6zy45+5J6Lt
 ZFQWoegkEUsQ94JrQjUqyVDM5gH9f2fuiJuvGRb8hhHJLznY5HI6Kt+Nv/ZxjRZX
 nWX0CE4w3h2NXsr7X57WJ83VgOtzyFEprjVD973r0osmvGibjEBcWSWLN40bKESx
 7ajWzdIhs5RS8iikpD7il8lEfDh/aK0Z1+MwyHZR1cMTHqSj1WQ53OtlNkumkHkW
 C+53BKjyMgQHP0lVIznBncQBLS8NIP15x5FH9s0JthYO248FwBo7zgzSOY3qRDG+
 38+SIl5PnUAmITptQljEkmOaE97QFseS366mINH2kYu06W5WsQX75YZByf2WQ9lm
 b6GSyfCjbAXo041GCIsgJDjvMXmqi68P16O5VKxzcAhkTXh3Cel5BZqvrje/6U1o
 48/0D2l178FmHeeis5Idmu4Gbd85Uy4ex8kNvKjfk9Oskf0Mwvh37dXYzr22P3OY
 ONjZkmhmTnsy14InLk9s+w8++NTpanWrjeUs940xXJeGQpg7G68=
 =rXaa
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc2

Documentation:

* fix building with Sphinx 5.0+
* man-pages for cmp and bootd commands

UEFI:

* Avoid unaligned access in efi_file_from_path()
* More bug fixes
2022-11-16 11:08:51 -05:00
Tom Rini
d78cccb1ac Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
- Fix and improve microchip's clock driver to allow sync'ing DTS with linux
- Improve the help message in "SBI_V02" Kconfig
- Improve DTS property "isa-string" parsing rule
2022-11-16 11:08:28 -05:00
Ilias Apalodimas
a930d69baa efi_loader: replace a u16_strdup with alloc + memcpy
Heinrich reports that on RISC-V unaligned access is emulated by OpenSBI
which is very slow.  Performance wise it's better if we skip the calls
to u16_strdup() -- which in turn calls u16_strsize() and just allocate/copy the
memory directly.  The access to dp.length may still be unaligned, but that's
way less than what u16_strsize() would do

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use malloc() instead of calloc().
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Ilias Apalodimas
64012e0c52 efi_loader: add missing EFI_CALL when closing a file
Closing the files uses the EFI protocol and specifically it's .close
callback.  This needs to be wrapped on an EFI_CALL()

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Ilias Apalodimas
94a574d8f6 efi_loader: add comments on efi_file_from_path() regarding alignment
UEFI specification requires pointers that are passed to protocol member
functions to be aligned.  There's a u16_strdup in that function which
doesn't make sense otherwise  Add a comment so no one removes it
accidentally

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Masahisa Kojima
1167e88ab8 eficonfig: fix missing variable initialization
The 'ret' variable must be initialized before use
in eficonfig_delete_invalid_boot_option().

Fixes: c416f1c0bc ("bootmenu: add removable media entries")
Addresses-Coverity: 376207 ("Uninitialized variables")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
95d18c5ed0 efi_loader: improve description of efi_file_from_path()
Provide a description of the function's logic.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
3d595ac5f5 cmd: remove superfluous if in eficonfig_edit_boot_option
Goto for an immediately succeeding label is superfluous.

Fixes: 87d791423a ("eficonfig: menu-driven addition of UEFI boot option")
Addresses-Coverity: 376202 ("Identical code for different branches")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
00ec77f2b0 MAINTAINERS: add UEFI commands to EFI PAYLOAD
Add the following files to EFI PAYLOAD:

- cmd/bootefi.c
- cmd/efidebug.c
- cmd/eficonfig.c
- cmd/nvedit_efi.c

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-11-16 08:34:06 +01:00
Ilias Apalodimas
9fb3269ab3 efi_loader: initialize return values in efi_uninstall_multiple_protocol_interfaces_int()
If the va_list we got handed over contains no protocols we must return
EFI_SUCCESS.  However in that case the current code just returns
an unintialized value.
Fix that by setting the return value in the variable definition

Addresses-Coverity: CID 376195:  ("Uninitialized variables  (UNINIT)")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Quentin Schulz
2b94359e9c doc: fix build with sphinx 5.0 and later.
Sphinx 5.0 and later fails to build when language is set to None:
Warning, treated as error:
Invalid configuration value found: 'language = None'. Update your configuration to a valid langauge code. Falling back to 'en' (English)

Let's set the language to English since it is the language used for the
documentation.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
030c2d187e doc: add man-page for cmp command
Provide a man-page for the cmp command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
5727f922ca Documentation: man-page for command bootd
Provide a man-page for the bootd command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
dd706c83be sandbox: fix documentation of struct host_ops
The documentation of struct host_ops should be Sphinx compliant.

Fixes: 9bd1aa8af2 ("dm: sandbox: Create a new HOST uclass")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
a8a0fc4628 doc: fix documentation of enum gd_flags
Correct GD_FLG_CYCLIC_RUNNING documentation to match Sphinx style.

Fixes: d7de5ef629 ("cyclic: use a flag in gd->flags for recursion protection")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-16 08:34:06 +01:00
Heinrich Schuchardt
591e0f8780 riscv: enable reset via SBI on PolarFire Icicle Kit
HSS 2022.10 provides support for resetting the board.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2022-11-15 15:37:17 +08:00
Heinrich Schuchardt
5c89467262 riscv: clarify meaning of CONFIG_SBI_V02
Describe that CONFIG_SBI_V02=y does not mean SBI specification v0.2
but v0.2 or later.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2022-11-15 15:37:17 +08:00
Yu Chien Peter Lin
c277c787a0 riscv: Fix detecting FPU support in standard extension
We should check the string until it hits underscore, in case it
searches multi-letter extensions. For example, "rv64imac_xandes"
will be treated as D extension support since there is a "d" in
"andes", resulting illegal instruction caused by initializing FCSR.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2022-11-15 15:37:17 +08:00
Conor Dooley
3f3527044d riscv: dts: fix the mpfs's reference clock frequency
The initial devicetree for PolarFire SoC incorrectly created a fixed
frequency clock in the devicetree to represent the msspll, but the
msspll is not a fixed frequency clock. The actual reference clock on a
board is either 125 or 100 MHz, 125 MHz in the case of the icicle kit.
Swap the incorrect representation of the msspll out for the actual
reference clock.

Fixes: dd4ee416a6 ("riscv: dts: Add device tree for Microchip Icicle Kit")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Conor Dooley
4e405c68fb clk: microchip: mpfs: fix criticality of peripheral clocks
Sync the critical clocks in the U-Boot driver with those marked as
critical in Linux. The Linux driver has an explanation of why each clock
is considered to be critical, so import that too.

Fixes: 2f27c9219e ("clk: Add Microchip PolarFire SoC clock driver")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Conor Dooley
88b697fb37 clk: microchip: mpfs: fix periph clk parentage
Not all "periph" clocks are children of the AHB clock, some have the AXI
clock as their parent & the mtimer clock is derived from the external
reference clock directly. Stop assuming the AHB clock to be the parent
of all "periph" clocks and define their correct parents instead.

Fixes: 2f27c9219e ("clk: Add Microchip PolarFire SoC clock driver")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Conor Dooley
32cfdd5163 clk: microchip: mpfs: fix reference clock handling
The original devicetrees for PolarFire SoC messed up & defined the
msspll's output as a fixed-frequency, 600 MHz clock & used that as the
input for the clock controller node. The msspll is not a fixed
frequency clock and later devicetrees handled this properly. Check the
devicetree & if it is one of the fixed ones, register the msspll.
Otherwise, skip registering it & pass the reference clock directly to
the cfg clock registration function so that existing devicetrees are
not broken by this change.

As the MSS PLL is not a "cfg" or a "periph" clock, add a new driver for
it, based on the one in Linux.

Fixes: 2f27c9219e ("clk: Add Microchip PolarFire SoC clock driver")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Conor Dooley
fb103971fe clk: microchip: mpfs: convert parent rate acquistion to get_get_rate()
Currently the clock driver for PolarFire SoC takes a very naive approach
to the relationship between clocks. It reads the dt to get an input
clock, assumes that that is fixed frequency, reads the "clock-frequency"
property & uses that to set up both the "cfg" and "periph" clocks.

Simplifying for the sake of incremental fixes, the "correct" parentage for
the clocks currently supported in U-Boot is that the "cfg" clocks should
be children of the fixed frequency clock in the dt. The AHB clock is one
of these "cfg" clocks and is the parent of the "periph" clocks.

Instead of passing the clock rate of the fixed-frequency clock to the
"cfg" and "periph" registration functions and the name of the parents,
pass their actual parents & use clk_get_rate() to determine their parents
rates.

The "periph" clocks are purely gate clocks and should not be reading the
AHB clocks registers to determine their rates, as they can simply report
the output of clk_get_rate() on their parent.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Conor Dooley
540d02217f dt-bindings: clk: add missing clk ids for microchip mpfs
When this binding header was initally upstreamed, the PLL clocking the
microprocessor subsystem (MSS) and the RTC reference clocks were
omitted. Add them now, matching the IDs used in Linux.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
2022-11-15 15:37:17 +08:00
Tom Rini
c4ee4fe92e For 2022.01
-----------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083
 
 - Fix UART
 - moved to binman (MX8 boards)
 - Toradex: sync DTS with Linux
 - Gateworks: fixes
 - New boards : MSC SM2S iMX8MP
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCY3IX9A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76a1dQCfTS1TpBF/Sjj0htkhw88AI+3x6UIAni5w6FmV
 bXA7Ymykew4cCkSRvesZ
 =OdkN
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20221114' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2022.01
-----------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083

- Fix UART
- moved to binman (MX8 boards)
- Toradex: sync DTS with Linux
- Gateworks: fixes
- New boards : MSC SM2S iMX8MP
2022-11-14 09:33:36 -05:00
Tom Rini
fac432652f Merge tag 'for-v2023.01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-i2c
i2c Fixes for v2023.01-rc2

- i2c-gpio: add a missing new line in printed string
  detected and fixed by Sergei

- microchip i2c driver fixes from Conor
  - fix erroneous late ack send
  - fix ack sending logic
2022-11-14 07:29:30 -05:00
Sergei Antonov
b0c485fd38 i2c: i2c-gpio: add newline
Add newline at the end of the printed string.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-11-14 07:24:47 +01:00
Conor Dooley
6d133b3158 i2c: microchip: fix erroneous late ack send
A late ack is currently being sent at the end of a transfer due to
incorrect logic in mchp_corei2c_empty_rx(). Currently the Assert Ack
bit is being written to the controller's control reg after the last
byte has been received, causing it to sent another byte with the ack.
Instead, the AA flag should be written to the control register when
the penultimate byte is read so it is sent out for the last byte.

Reported-by: Andreas Buerkler <andreas.buerkler@enclustra.com>
Fixes: 0dc0d1e094 ("i2c: Add Microchip PolarFire SoC I2C driver")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Removed Tag by hs: Fixes: 0190d48488 ("i2c: microchip: fix ack sending logic")
2022-11-14 07:21:58 +01:00
Conor Dooley
95b22bd6dc i2c: microchip: fix ack sending logic
"Master receive mode" was not correctly sending ACKs/NACKs in the
interrupt handler. Bring the handling of M_SLAR_ACK, M_RX_DATA_ACKED &
M_RX_DATA_NACKED in line with the Linux driver.

Fixes: 0dc0d1e094 ("i2c: Add Microchip PolarFire SoC I2C driver")
Reported-by: Shravan Chippa <shravan.chippa@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-11-14 07:20:10 +01:00
Fabio Estevam
fc1c1760de Revert "serial: mxc: have putc use the TXFIFO"
This reverts commit c7878a0483.

Since commit c7878a0483 ("serial: mxc: have putc use the TXFIFO"),
serial console corruption can be seen when priting inside board_init().

Revert it to avoid the regression.

Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-11-12 14:16:26 +01:00
Fabio Estevam
c9713c1551 imx8-u-boot: Fix SPL guard option
We should guard the SPL nodes against CONFIG_SPL_BUILD to fix
the following build error when the blobs are absent:

binman: Fail open first container file mx8qm-ahab-container.img

Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-11-12 14:13:49 +01:00
Tom Rini
0cbeed4f66 Merge branch '2022-11-10-symbol-migrations'
- Migrate a number of CONFIG symbols to Kconfig and start migrating some
  symbol families from CONFIG to the CFG namespace.
2022-11-10 10:09:40 -05:00
Tom Rini
cc1159bbfa global: Migrate CONFIG_HPS* symbols to the CFG namespace
Migrate all of CONFIG_HPS* to the CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
6cc04547cb global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
5155207ae1 global: Migrate CONFIG_SYS_MPC8* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_MPC* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-10 10:08:55 -05:00
Tom Rini
d236210c11 Convert CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
8c778f7834 Convert CONFIG_SYS_NONCACHED_MEMORY to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_NONCACHED_MEMORY

To do this we introduce CONFIG_SYS_HAS_NONCACHED_MEMORY as a bool to
gate if we are going to have noncached_... functions available and then
continue to use CONFIG_SYS_NONCACHED_MEMORY to store the size of said
cache. We make this new option depend on both the architectures which
implement support and the drivers which make use of it.

Cc: Tom Warren <twarren@nvidia.com>
Cc: Mingming lee <mingming.lee@mediatek.com>
Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
Cc: Alban Bedel <alban.bedel@avionic-design.de>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
02f5a01441 SYS_NONCACHED_MEMORY: Correct comment in common/board_f.c
The comment block in reserve_noncached has a typo in one filename and
an incorrect filename in another function reference. Correct both of
these.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
15713fc855 mediatek: Include <linux/sizes.h> where needed
These files reference SZ_ macros without including <linux/sizes.h>,
correct this.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
9ba938e744 Convert CONFIG_SYS_MMC_MAX_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_MAX_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-11-10 10:08:55 -05:00
Tom Rini
75fc79e530 Convert CONFIG_SYS_MMC_MAX_BLK_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_MAX_BLK_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-11-10 10:08:55 -05:00
Tom Rini
a918df21f0 Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAX_NAND_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:54 -05:00
Tom Rini
e28e0f47f3 rtc: Remove unused drivers
These drivers are not enabled anywhere, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00