Commit graph

280 commits

Author SHA1 Message Date
Simon Glass
96f37b092f blk: Support iteration
It is useful to be able to iterate over block devices. Typically there
are fixed and removable devices. For security reasons it is sometimes
useful to ignore removable devices since they are under user control.

Add iterators which support selecting the block-device type.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21 10:27:35 -06:00
Tom Rini
be5c0608b8 usb: Enforce DM_USB migration for USB_HOST devices.
As the deadline for migration to DM_USB, when using a USB host
controller has now gone two years past the deadline, enforce migration.
This is done by:

- Ensuring that all host controller options (other than the very legacy
  old MUSB ones) now select USB_HOST.  USB_HOST now enforces DM_USB and
  OF_CONTROL.
  - Remove other parts of Kconfig logic that had platforms pick DM_USB.
  - To keep Kconfig happy, have some select statements test for USB_HOST
    as well.
- Re-order some Kconfig entries and menus so that we can cleanly pick
  host or gadget roles.  For the various HCD options that have platform
  glue options, group them together and update dependencies in some
  cases.
- As SPL_DM_USB is not required, on platforms that had not yet enabled
  it, disable it.

Cc: Marek Vasut <marex@denx.de>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Samuel Holland <samuel@sholland.org>
Cc: FUKAUMI Naoki <naobsd@gmail.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18 21:05:31 -04:00
Patrick Delaunay
b953ec2bca dm: define LOG_CATEGORY for all uclass
Define LOG_CATEGORY for all uclass to allow filtering with
log command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06 10:38:03 -06:00
Reinoud Zandijk
0a527fda78 Fix IDE commands issued, fix endian issues, fix non MMIO
Fixes IDE issues found on the Malta board under Qemu:

1) DMA implied commands were sent to the controller in stead of the PIO
variants. The rest of the code is DMA free and written for PIO operation.

2) direct pointer access was used to read and write the registers instead
of the inb/inw/outb/outw functions/macros. Registers don't have to be
memory mapped and ATA_CURR_BASE() does not have to return an offset from
address zero.

3) Endian isues in ide_ident() and reading/writing data in general. Names
were corrupted and sizes misreported.

Tested malta_defconfig and maltael_defconfig to work again in Qemu.

Signed-off-by: Reinoud Zandijk <reinoud@NetBSD.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20 07:31:12 -04:00
Simon Glass
1758551ec9 sandbox: Provide a way to bind fixed/removeable devices
At present when a file is bound to a host device it is always marked as
removeable. Arguably the device is removeable, since it can be unbound at
will. However while it is bound, it is not considered removable by the
user. Also it is useful to be able to model both fixed and removeable
devices for code that distinguishes them.

Add a -r flag to the 'host bind' command and plumb it through to provide
this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Heinrich Schuchardt
297b8b3ebf sandbox: host bind must close file descriptor
Each invocation of the 'host bind' command with a file name argument opens
a file descriptor. The next invocation of the 'host bind' command destroys
the block device but the file descriptor remains open. The same holds true
for the 'unbind blk' command.

Close the file descriptor when unbinding the host block device.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03 19:17:25 -07:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Heinrich Schuchardt
168e313b5b sandbox: fill block device meta information
Provide information about host backed block device.

Mark the device created by 'host bind' as removable.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-30 14:25:42 -07:00
Simon Glass
c69cda25c9 dm: treewide: Rename dev_get_platdata() to dev_get_plat()
Rename this to be consistent with the change from 'platdata'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Simon Glass
41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00
Anastasiia Lukianenko
722bc5b5d9 xen: pvblock: Add initial support for para-virtualized block driver
Add initial infrastructure for Xen para-virtualized block device.
This includes compile-time configuration and the skeleton for
the future driver implementation.
Add new class UCLASS_PVBLOCK which is going to be a parent for
virtual block devices.
Add new interface type IF_TYPE_PVBLOCK.

Implement basic driver setup by reading XenStore configuration.

Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14 15:18:30 -04:00
Ovidiu Panait
365af27f0d blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC
Extend manual relocation of block_cache list pointers to all platforms that
enable CONFIG_NEEDS_MANUAL_RELOC. Remove m68k-specific checks and provide a
single implementation that adds gd->reloc_off to the pre-relocation
pointers.

Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
[trini: Add guard around DECLARE_GLOBAL_DATA_PTR to avoid size growth]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06 18:08:22 -04:00
Ovidiu Panait
3a4b52a9e5 dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe
Use IS_ENABLED() instead of #ifdef in blk_post_probe function.

No functional change intended.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
[trini: Fix thinko and use CONFIG_HAVE_BLOCK_DEVICE in IS_ENABLED()]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06 14:26:50 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Heinrich Schuchardt
e6e9a4f0a9 block: ide: use definitions from include/libata.h
Currently ATA commands are defined both in include/libata.h and
include/ata.h. Use the command definitions from include/libata.h where
applicable.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17 12:32:36 -04:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
61b29b8268 dm: core: Require users of devres to include the header
At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Angelo Durgehello
c05b38df47 common: fix regression on block cache init
m68k needs block cache list initialized after relocation.
Other architectures must not be involved.

Fixing regression related to:

commit 1526bcce0f
	("common: add blkcache init")

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-26 13:36:14 -05:00
Angelo Durgehello
1526bcce0f common: add blkcache init
On m68k, block_cache list is relocated, but next and prev list
pointers are not adjusted to the relocated struct list_head address,
so the first iteration over the block_cache list hangs.

This patch initializes the block_cache list after relocation.

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2020-01-25 12:04:36 -05:00
Tom Rini
4df23e58a4 blk: Make use of CONFIG_HAVE_BLOCK_DEVICE more
When we do not have CONFIG_BLK (or SPL/TPL) enabled there are very few
cases where we need the blk_legacy code linked in. To catch these, build
when we have CONFIG_HAVE_BLOCK_DEVICE set.  In addition, we only need
cmd/blk_common.o to be linked in when we have CONFIG_HAVE_BLOCK_DEVICE
set, so make use of that directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 08:43:24 -05:00
Heinrich Schuchardt
ee5041451e blk: set log2blksz in blk_create_device()
The ext4 file system requires log2blksz to be set. So when setting the
block size on the block descriptor we should fill this field too.

This fixes a problem with EFI block devices providing ext4 partitions, cf.
https://lists.denx.de/pipermail/u-boot/2019-October/387702.html.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-30 17:49:40 +01:00
Simon Glass
e5f7390458 dm: core: Add device_foreach_child()
We have a 'safe' version of this function but sometimes it is not needed.
Add a normal version too and update a few places that can use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:39 +08:00
Weijie Gao
1ce884797c Revert "blk: Invalidate block cache when switching hwpart"
This reverts commit 0ebe112d09.

Most block devices have only one hwpart. Multiple hwparts only found used
by eMMC devices in u-boot. The mmc driver do blk_dselect_hwpart() at the
beginning of mmc_bread() which causes block cache being invalidated too
frequently and makes block cache useless.

So it's not a good idea to put blkcache_invalidate() in the common
functions. It should be called inside mmc_select_hwpart().

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Felix Brack <fb@ltec.ch>
2019-08-30 14:17:11 -04:00
Weijie Gao
0ebe112d09 blk: Invalidate block cache when switching hwpart
Some storage devices have multiple hw partitions and both address from
zero, for example eMMC.
However currently block cache invalidation only applies to block
write/erase.
This can cause a problem that data of current hw partition is cached
before switching to another hw partition. And the following read
operation of the latter hw partition will get wrong data when reading
from the addresses that have been cached previously.

To solve this problem, invalidate block cache after a successful
select_hwpart operation.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18 11:31:31 -04:00
Simon Glass
731ba3c0be blk: Allow control of the block cache in TPL
Generally block devices are not enabled in TPL, but in case they are,
add a Kconfig option for the block cache. This allows the setting (default
off) to be found with CONFIG_IS_ENABLED().

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10 16:52:58 -06:00
Marek Vasut
2e89bbefdc blk: Increase cache element size
Cache up to 4 kiB entries. 4 kiB is the default block size on ext4, yet
the underlying block layer devices usually report support for 512B . In
most cases, the 512B support is emulated (ie. SD cards, SSDs, USB sticks
etc.) and the real block size of those devices is much bigger.

To avoid performance degradation with such devices and FS setup, bump
the maximum cache entry size to 4 kiB.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:53 -05:00
Tom Rini
91ff686562 blk: Rework guard around part_init call
The function part_init() will only be built when we have both
CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set.  Protect the call to
this function with both of these tests now.

Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-12 12:14:22 -05:00
Tuomas Tynkkynen
4ad54ec4d5 blk: Introduce IF_TYPE_VIRTIO
This adds a new block interface type for VirtIO block devices.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Bin Meng
c879eeb7aa blk: Make blk_next_free_devnum() public
blk_next_free_devnum() can be helpful in some cases. Make it
a public API.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Bin Meng
c515ee5c51 blk: Drop blk_prepare_device()
With the post_probe() changes, this API is no longer needed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Bin Meng
d0851c8937 blk: Call part_init() in the post_probe() method
part_init() is currently called in every DM BLK driver, either
in its bind() or probe() method. However we can use the BLK
uclass driver's post_probe() method to do it automatically.

Update all DM BLK drivers to adopt this change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Bin Meng
8f994c860d sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data
Currently the sandbox block driver uses priv_auto_alloc_size for
the driver data, however that's only available after the device
probe phase. In order to make it accessible in an earlier phase,
switch to use platdata_auto_alloc_size instead.

This patch is the prerequisite for the follow up patch of DM BLK
driver changes to work with Sandbox.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Simon Glass
ef39151583 blk: Support block drivers in TPL
At present it is not possible to enable/disable block drivers in TPL. This
is needed to provide sandbox support. Add a Kconfig option and adjust the
Makefile.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-09 04:40:27 -06:00
Tien Fong Chee
bc53d2637e block: Add a function to find block device descriptor
Add a function to find the block device descriptor of the parent
device.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
[trini: Move function declaration to avoid warning]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28 20:22:33 -04:00
Adam Ford
6fef62cc47 block: Add SPL_BLOCK_CACHE and default n
When enabling BLOCK_CACHE on devices with limited RAM during SPL,
some devices may not boot.  This creates an option to enable
block caching in SPL by defaults off.  It is dependent on SPL_BLK

Fixes: 46960ad6d0 ("block: Have BLOCK_CACHE default to y in some cases")

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-18 14:43:13 -04:00
Tom Rini
46960ad6d0 block: Have BLOCK_CACHE default to y in some cases
When dealing with filesystems that come from block devices we can get a
noticeable performance gain in some use cases from having the block
cache enabled.  The code paths are valid in other cases when we have BLK
set and may provide wins in raw reads in some use cases, so have this be
default when BLK is enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-07 09:12:26 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
34a5c4257a SystemACE: Remove
This driver is no longer used on any supported platform in U-Boot and
there is no interest in maintaining it further from people that have
used it historically.

Cc: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
c: Alexey Brodkin <alexey.brodkin@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2018-02-13 23:24:22 -05:00
Adam Ford
1811a928c6 Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE
based on a list of enabled options.  Moving HAVE_BLOCK_DEVICE to
Kconfig allows us to drastically shrink the logic in
config_fallbacks.h

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 19:09:03 -05:00
Tom Rini
560eeee8c2 block: Migrate SystemACE chip to Kconfig
Migrate the base and sub-options to Kconfig.  Note that we only enable
this in the base sandbox config now.

Cc: Alexey Brodkin <alexey.brodkin@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Is this driver still used anywhere?  It's fishy that it's only enabled
in sandbox anymore.
2018-02-08 19:08:41 -05:00
Heinrich Schuchardt
05ef48a248 efi_driver: EFI block driver
This patch provides
* a uclass for EFI drivers
* a EFI driver for block devices

For each EFI driver the uclass
* creates a handle
* adds the driver binding protocol

The uclass provides the bind, start, and stop entry points for the driver
binding protocol.

In bind() and stop() it checks if the controller implements the protocol
supported by the EFI driver. In the start() function it calls the bind()
function of the EFI driver. In the stop() function it destroys the child
controllers.

The EFI block driver binds to controllers implementing the block io
protocol.

When the bind function of the EFI block driver is called it creates a
new U-Boot block device. It installs child handles for all partitions and
installs the simple file protocol on these.

The read and write functions of the EFI block driver delegate calls to the
controller that it is bound to.

A usage example is as following:

U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and
exposes a handle with the block IO protocol. It calls ConnectController.

Now the EFI block driver installs the partitions with the simple file
protocol.

iPXE uses the simple file protocol to load Grub or the Linux Kernel.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: add comment on calloc len]
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:14 +01:00
Stefan Roese
8a5cbc065d dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()
This patch changes the calls to uclass_first/next_device() in blk_first/
next_device() to use uclass_find_first/next_device() instead. These functions
don't prepare the devices, which is correct in this case.

With this patch applied, the "usb storage" command now works again as
expected:

=> usb storage
  Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra
  Type: Removable Hard Disk
  Capacity: 58656.0 MB = 57.2 GB (120127488 x 512)

Without this patch, it used to generate this buggy output:

=> usb storage
Card did not respond to voltage select!
mmc_init: -95, time 26
No storage devices, perhaps not 'usb start'ed..?

Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12 19:53:45 -07:00
Bin Meng
723b43daec blk: Remove various places that do flush cache after read
All these places seem to inherit the codes from the MMC driver where
a FIXME was put in the comment. However the correct operation after
read should be cache invalidate, not flush.

The underlying drivers should be responsible for the cache operation.
Remove these codes completely.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: York Sun <york.sun@nxp.com>
2017-09-15 08:05:10 -04:00
Jean-Jacques Hiblot
5fe7702ecc blk: dm: make blk_create_device() take a number of block instead of a size
There is an overflow problem when taking the size instead of the number
of blocks in blk_create_device(). This results in a wrong device size: the
device apparent size is its real size  modulo 4GB.
Using the number of blocks instead of the device size fixes the problem and
is more coherent with the internals of the block layer.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-11 21:43:58 -06:00
Bin Meng
1f4adab873 block: ide: Don't bother to create BLK device if no CDROM inserted
When there is no CDROM inserted, the block size is zero hence there
is no need to create a BLK device for it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-10 12:27:40 -04:00
Bin Meng
68e6f221ed block: ide: Fix block read/write with driver model
This converts the IDE driver to driver model so that block read and
write are fully functional.

Fixes: b7c6baef ("x86: Convert MMC to driver model")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-09-10 12:27:37 -04:00
Bin Meng
2c3b68081a block: Drop the ftide020 driver
This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-03 15:30:35 -04:00