Commit graph

55 commits

Author SHA1 Message Date
Chris Packham
58804b8cf2 buildman: fix typo
Fix a typo in the error message from CheckOutputDir().

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-09 12:50:22 -07:00
Simon Glass
00beb2485f buildman: Add support for building with clang
Add a -O option which allows building with clang.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-01-14 17:47:13 -07:00
Simon Glass
40232c91d7 buildman: Only print toolchain probing with -v
At present --list-tool-chains prints a lot of information about the
toolchain-probing process. This is generally not very interesting.
Update buildman to print this only if --list-tool-chains is given
with -v.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-20 19:14:22 -07:00
Simon Glass
0689036a35 buildman: Add a --boards option to specify particular boards to build
At present 'buildman sandbox' will build all 5 boards for the sandbox
architecture rather than the single board 'sandbox'. The only current way
to exclude sandbox_spl, sandbox_noblk, etc. is to use -x which is a bit
clumbsy.

Add a --boards option to allow individual build targets to be specified.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-14 09:16:27 -08:00
Alex Kiernan
48ae412424 buildman: Add support for environment delta in summary
When summarising the builds, add the -U option to emit delta lines for
the default environment built into U-Boot at each commit.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-07 11:25:07 -08:00
Lothar Waßmann
409fc029c4 tools: buildman: Don't use the working dir as build dir
When the U-Boot base directory happens to have the same name as the branch
that buildman is directed to use via the '-b' option and no output
directory is specified with '-o', buildman happily starts removing the
whole U-Boot sources eventually only stopped with the error message:

OSError: [Errno 20] Not a directory: '../<branch-name>/boards.cfg

Add a check to avoid this and also deal with the case where '-o' points
to the source directory, or any subdirectory of it.

Finally, tidy up the confusing logic for removing the old tree when using
-b. This is only done when building a branch.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
2018-05-16 00:25:19 -06:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Daniel Schwierzeck
2371d1bcbf buildman: add option -E for treating compiler warnings as errors
Add a new option '-E' for treating all compiler warnings as errors.
Eventually this will pass 'KCFLAGS=-Werror' to Kbuild.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-02-04 22:55:34 -05:00
Simon Glass
8d7523c55c buildman: Allow showing the list of boards with -n
As well as showing the number of boards, allow showing the actual list of
boards that would be built, if -v is provided.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:16 -07:00
Simon Glass
b464f8e7de buildman: Squash useless output from -K
When using #define CONFIG_SOME_OPTION, the value it set to '1'. When using
defconfig (i.e. CONFIG_SOME_OPTION=y) the value is set to 'y'. This results
in differences showing up with -K. These differences are seldom useful.

Adjust buildman to suppress these differences by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Simon Glass
b50113f373 buildman: Add an option to just create the config
Normally buildman does a full build of a board. This includes creating the
u-boot.cfg file which contains all the configuration options. Buildman uses
this file with the -K option, to show differences in effective configuration
for each commit.

Doing a full build of U-Boot just to create the u-boot.cfg file is wasteful.
Add a -D option which causes buildman to only create the configuration. This
is enough to support use of -K and can be done much more quickly (typically
5-10 times faster).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 10:37:47 -07:00
Simon Glass
785f1548a9 patman: Adjust command.Output() to raise an error by default
It is more useful to have this method raise an error when something goes
wrong. Make this the default and adjust the few callers that don't want to
use it this way.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-18 21:04:38 -06:00
Simon Glass
7e92e46e63 buildman: Drop the toolchain error when downloading toolchains
It doesn't make sense to complain about missing toolchains when the
--fetch-arch option is being used. The user is presumably aware that there
is a toolchain problem and is actively correcting it by running with this
option.

Refactor the code to avoid printing this confusing message.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-31 19:37:08 -06:00
Simon Glass
713bea38dd buildman: Improve the toolchain progress/error output
Use colour to make it easier to see what is going on. Also print a message
before downloading a new toolchain. Mention --fetch-arch in the message that
is shown when there are no available toolchains, since this is the quickest
way to resolve the problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-31 19:37:08 -06:00
Stephen Warren
f79f1e0c0e buildman: allow more incremental building
One use-case for buildman is to continually run it interactively after
each small step in a large refactoring operation. This gives more
immediate feedback than making a number of commits and then going back and
testing them. For this to work well, buildman needs to be extremely fast.
At present, a couple issues prevent it being as fast as it could be:

1) Each time buildman runs "make %_defconfig", it runs "make mrproper"
first. This throws away all previous build results, requiring a
from-scratch build. Optionally avoiding this would speed up the build, at
the cost of potentially causing or missing some build issues.

2) A build tree is created per thread rather than per board. When a thread
switches between building different boards, this often causes many files
to be rebuilt due to changing config options. Using a separate build tree
for each board would avoid this. This does put more strain on the system's
disk cache, but it is worth it on my system at least.

This commit adds two command-line options to implement the changes
described above; -I ("--incremental") turns of "make mrproper" and -P
("--per-board-out-dir") creats a build directory per board rather than per
thread.

Tested:

    ./tools/buildman/buildman.py tegra
    ./tools/buildman/buildman.py -I -P tegra
    ./tools/buildman/buildman.py -b tegra_dev tegra
    ./tools/buildman/buildman.py -b tegra_dev -I -P tegra

... each once after deleting the buildman result/work directory, and once
"incrementally" after a previous identical invocation.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org> # v1
Tested-by: Simon Glass <sjg@chromium.org> # v1
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
2bdeade0ea buildman: patman: Fix -H when installed as a symlink
It is convenient to install symlinks to buildman and patman in the search
patch, such as /usr/local/bin. But when this is done, the -H option fails to
work because it looks in the directory containing the symlink instead of its
target. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-14 15:34:50 -06:00
Simon Glass
843312dcdd buildman: Allow comparison of build configuration
It is useful to be able to see CONFIG changes made by commits. Add this
feature to buildman using the -K flag so that all CONFIG changes are
reported.

The CONFIG options exist in a number of files. Each is reported
individually as well as a summary that covers all files. The output
shows three parts: green for additions, red for removals and yellow for
changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 16:24:25 -06:00
Simon Glass
d2ce658de5 buildman: Add an option to write the full build output
Normally buildman runs with 'make -s' meaning that only errors and warnings
appear in the log file. Add a -V option to run make in verbose mode, and
with V=1, causing a full build log to be created.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
827e37b558 buildman: Add the option to download toolchains from kernel.org
The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient
repository of toolchains which can be used for U-Boot. Add a feature to
download and install a toolchain for a selected architecture automatically.

It isn't clear how long this site will stay in the current place and
format, but we should be able to rely on bug reports if it changes.

Suggested-by: Marek Vašut <marex@denx.de>
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:54 -08:00
Simon Glass
bb1501f2c2 buildman: Add an option to use the full tool chain path
In some cases there may be multiple toolchains with the same name in the
path. Provide an option to use the full path in the CROSS_COMPILE
environment variable.

Note: Wolfgang mentioned that this is dangerous since in some cases there
may be other tools on the path that are needed. So this is set up as an
option, not the default. I will need test confirmation (i.e. that this
commit fixes a real problem) before merging it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Steve Rae <srae@broadcom.com>
2015-01-14 21:16:53 -08:00
Simon Glass
5abab20dfb buildman: Allow specifying a range of commits to build
Adjust the -b flag to permit a range expression as well as a branch.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-14 21:16:53 -08:00
Simon Glass
0740127f4d buildman: Don't remove entire output directory when testing
When running tests the output directory is often wiped. This is only safe if
a branch is being built. The output directory may contain other things
besides the buildman test output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
5971ab5c44 buildman: Add an option to flatten output directory trees
When building current source for a single board, buildman puts the output
in <output_dir>/current/current/<board>. Add an option to make it use
<output_dir>/<board> instead. This removes the unnecessary directories
in that case, controlled by the --no-subdirs/-N option.

Suggested-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
2a9e2c6a09 buildman: Try to guess the upstream commit
Buildman normally obtains the upstream commit by asking git. Provided that
the branch was created with 'git checkout -b <branch> <some_upstream>' then
this normally works.

When there is no upstream, we can try to guess one, by looking up through
the commits until we find a branch. Add a function to try this and print
a warning if buildman ends up relying on it.

Also update the documentation to match.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-14 21:16:52 -08:00
Simon Glass
05c96b187a buildman: Put build in 'current', not 'current/current'
Buildman currently puts current-source builds in a current/current
subdirectory, but there is no need for the extra depth.

Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 21:16:52 -08:00
Simon Glass
1ddda1b321 patman: Use the full commit hash for 'git checkout'
Even with the initial 8 characeters of the hash we will sometimes get a
collision. Use the full hash.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-03 14:12:39 -07:00
Simon Glass
58d818f19f buildman: Don't default to -e when using -s
When using summary mode (-s) we don't always want to display errors.
Allow this option to be omitted.

Series-to: u-boot
Series-cc: albert
Change-Id: I6b37754d55eb920ecae114fceba55834b43ea3b9
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-03 14:10:53 -07:00
Simon Glass
7798e2285f buildman: Fix the logic for the bloat command
This check should now be done whatever mode buildman is running in, since
we may be displaying information while building.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-21 12:03:07 -06:00
Simon Glass
950a23133d buildman: Ignore conflicting tags
Tags like Series-version are normally expected to appear once, and with a
unique value. But buildman doesn't actually look at these tags. So ignore
conflicts.

This allows bulidman to build a branch containing multiple patman series.

Reported-by: Steve Rae <srae@broadcom.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:31 -06:00
Simon Glass
f7582ce849 buildman: Permit branch names with an embedded '/'
At present buildman naively uses the branch name as part of its directory
path, which causes problems if the name has an embedded '/'.

Replace these with '_' to fix the problem.

Reported-by: Steve Rae <srae@broadcom.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:31 -06:00
Simon Glass
883a321a4b buildman: Provide an internal option to clean the outpur dir
For testing it is useful to clean the output directory before running a
test. This avoids a test interfering with the results of a subsequent
test by leaving data around.

Add this feature as an optional parameter to the control logic.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:29 -06:00
Simon Glass
823e60b62a buildman: Allow tests to have their own boards
Rather than reading boards.cfg, which may take time to generate and is not
necessarily suitable for running tests, create our own list of boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:29 -06:00
Simon Glass
fd03d63f34 buildman: Set up bsettings outside the control module
Move the bsettings code back to the main buildman.py file, so we can do
something different when testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:28 -06:00
Simon Glass
d4144e45b4 buildman: Add a functional test
Buildman currently lacks testing in many areas, including its use of git,
make and many command-line flags.

Add a functional test which covers some of these areas. So far it does
a fake 'build' of all boards for the current source tree.

This version reads the real ~/.buildman and boards.cfg files. Future work
will improve this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:28 -06:00
Simon Glass
48ba5856eb buildman: Move full help code into the control module
There is no good reason to keep this code separate. Move it into control.py
so it is easier to test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-09 16:38:27 -06:00
Simon Glass
ed9666573e buildman: Add an option to show which boards caused which errors
Add a -l option to display a list of offending boards against each
error/warning line. The information will be shown in brackets as below:

02: wip
   sandbox: +   sandbox
       arm: +   seaboard
+(sandbox) arch/sandbox/cpu/cpu.c: In function 'timer_get_us':
+(sandbox) arch/sandbox/cpu/cpu.c:40:9: warning: unused variable 'i' [-Wunused-variable]
+(seaboard) board/nvidia/seaboard/seaboard.c: In function 'pin_mux_mmc':
+(seaboard) board/nvidia/seaboard/seaboard.c:36:9: warning: unused variable 'fred' [-Wunused-variable]
+(seaboard)      int fred;
+(seaboard)          ^

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
3cf4ae6f86 buildman: Implement an option to exclude boards from the build
Some boards are known to be broken and it is convenient to be able to
exclude them from the build.

Add an --exclude option to specific boards to exclude. This uses the
same matching rules as the normal 'include' arguments, and is a comma-
separated list of regular expressions.

Suggested-by: York Sun <yorksun@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:43 -06:00
Simon Glass
2c3deb9758 buildman: Set the return code to indicate build result
When buildman finds errors/warnings when building, set the return code to
indicate this.

Suggested-by: York Sun <yorksun@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-05 13:40:42 -06:00
Masahiro Yamada
390f7035d3 buildman: run genboardscfg.py all the time
This commit makes sure boards.cfg is up to date before starting
the build tests.  tools/genboardscfg.py exits immediately printing
"boards.cfg is up to date. Nothing to do." when boards.cfg is
already new.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-28 17:18:48 -04:00
Masahiro Yamada
31e2141d5a tools, scripts: refactor error-out statements of Python scripts
In Python, sys.exit() function can also take an object other
than an integer.

If an integer is given to the argument, Python exits with the return
code of it.  If a non-integer argument is given, Python outputs it
to stderr and exits with the return code of 1.

That means,

    print >> sys.stderr, "Blah Blah"
    sys.exit(1)

is equivalent to

    sys.exit("Blah Blah")

The latter is a useful shorthand.

Note:
Some error messages in Buildman and Patman were output to stdout.
But they should go to stderr.  They are also fixed by this commit.
This is a nice side effect.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-08-21 12:01:11 -04:00
Simon Glass
3b74ba5f1a buildman: Allow selection of the number of commits to build
It is useful to be able to build only some of the commits in a branch. Add
support for the -c option to allow this. It was previously parsed by
buildman but not implemented.

Suggested-by: York Sun <yorksun@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: York Sun <yorksun@freescale.com>
2014-08-13 08:34:16 -06:00
Simon Glass
0f7c9ddaed buildman: Add an option to specify the buildman config file
Add a new --config-file option (-G) to specify a different configuration
file from the default ~/.buildman.

Reported-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13 08:34:15 -06:00
Simon Glass
e5a0e5d842 buildman: Add verbose option to display errors as they happen
Normally buildman operates in two passes - one to do the build and another
to summarise the errors. Add a verbose option (-v) to display build problems
as they happen. With -e also given, this will display errors too.

When building the current source tree (rather than a list of commits in a
branch), both -v and -e are enabled automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13 08:34:15 -06:00
Simon Glass
b2ea7ab252 buildman: Refactor output options
We need the output options to be available in several places. It's a pain
to pass them into each function. Make them properties of the builder and
add a single function to set them up. At the same time, add a function which
produces summary output using these options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13 08:34:15 -06:00
Simon Glass
fea5858eb9 buildman: Allow building of current source tree
Originally buildman had some support for building the current source tree.
However this was dropped before it was submitted, as part of the effort to
make it faster when building entire branches.

Reinstate this support. If no -b option is given, buildman will build the
current source tree.

Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13 08:34:14 -06:00
Masahiro Yamada
73f30b9b80 buildman: adjust for Kconfig
Use "make <board>_defconfig" instead of "make <board>_config".

Invoke tools/genboardscfg.py to generate boards.cfg when it is missing.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 14:42:02 -04:00
Masahiro Yamada
9979692383 buildman: make sure to invoke GNU Make
Since the command name 'make' may not be GNU Make on some platforms
such as FreeBSD, buildman should call scripts/show-gnu-make to get
the command name for GNU MAKE (and error out if it is not found).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-29 11:48:40 -04:00
Simon Glass
189a496825 buildman: Support in-tree builds
At present buildman always builds out-of-tree, that is it uses a separate
output directory from the source directory. Normally this is what you want,
but it is important that in-tree builds work also. Some Makefile changes may
break this.

Add a -i option to tell buildman to use in-tree builds, so that it is easy
to test this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-28 04:52:55 +01:00
Simon Glass
97e915262e buildman: Add -C option to force a reconfigure for each commit
Normally buildman wil try to configure U-Boot for a particular board on the
first commit that it builds in a series. Subsequent commits are built
without reconfiguring which normally works. Where it doesn't, buildman
automatically reconfigures and retries.

To fully emulate the way MAKEALL works, we should have an option to disable
this optimisation.

Add a -C option to cause buildman to always reconfigure on each commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-28 04:52:48 +01:00
Simon Glass
4266dc2882 buildman: Add -F flag to retry failed builds
Generally a build failure with a particular commit cannot be fixed except
by changing that commit. Changing the commit will automatically cause
buildman to retry when you run it again: buildman sees that the commit
hash is different and that it has no previous build result for the new
commit hash.

However sometimes the build failure is due to a toolchain issue or some
other environment problem. In that case, retrying failed builds may yield
a different result.

Add a flag to retry failed builds. This differs from the force rebuild
flag (-f) in that it will not rebuild commits which are already marked as
succeeded.

Series-to: u-boot

Change-Id: Iac4306df499d65ff0888b1c60f06fc162a6faad8
2014-07-23 09:52:33 -06:00