Commit graph

893 commits

Author SHA1 Message Date
Stefan Roese
fe11ae2437 usb: Add EHCI support for Armada 38x (mvebu)
This patch adds USB EHCI host support for the common mvebu platform.
Including the Armada 38x.

Tested on DB-88F6280-GP eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:55:50 +02:00
Hans de Goede
7f59d16a50 usb: ehci: Properly deal with data toggle for interrupt endpoints
Without this we loose every other interrupt packet. We never noticed this
because with keyboards the packets which we were loosing would normally
be key release packets.

But now that we do keyrepeat in software instead of relying on the hid
idle functionality, missing a release will result in key repeat triggering.

This commit fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-06-19 14:33:28 +02:00
Hans de Goede
998b8ab3f6 sunxi: musb: Remove unused sunxi_musb_exit method
Remove the unused sunxi_musb_exit method, there is no code in u-boot
calling the exit method, and our implementation was broken as it did
not disable the clocks and asserted reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-17 15:22:42 +02:00
Hans de Goede
e1abfa437a sunxi: musb: Do not fully reset the controler from sunxi_musb_disable
Fully resetting the controller is a too big hammer, and the musb_core will
then afterwards fail to communicate with any endpoints other then 0 as
too much state was cleared.

Instead report vbus low for 200ms which will effectively end the current
session without needing to do a full reset.

This fixes usb mass-storage devices no longer working after a "usb reset"

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-17 15:22:07 +02:00
Tom Rini
0d3f732fd2 Merge git://git.denx.de/u-boot-usb 2015-06-15 20:45:50 -04:00
Simon Glass
257bfd2e21 dm: usb: tegra: Drop legacy USB code
Drop the code that doesn't use driver model for USB.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:55 -06:00
Simon Glass
0c5dd9ae2f dm: usb: Implement usb_detect_change() for driver model
Support this function with driver model also (CONFIG_DM_USB).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:54 -06:00
Inha Song
075020abbf usb: f_mass_storage: sleep_thread: decrease the interval for check ctrlc()
This change decreases the interval of calls to:
- display busy indicator
- check ctrlc()
- check cable connection

By this change, breaking the UMS command is more easy on Odroid XU3.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2015-06-08 15:26:00 +02:00
Lukasz Majewski
a272c99d30 samsung: usb: phy: Support for DWC3 PHY
New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have
been added to u-boot to provide proper PHY handling at Exynos5 SoCs.

This code is used thereafter in the board_usb_init() call.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2015-06-08 15:25:44 +02:00
Tom Rini
4d80051b63 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-06-08 08:37:02 -04:00
Sanchayan Maity
60ed286453 usb: ehci-vf: Add weak function for board specific initialisation
Add a weak function board_ehci_hcd_init which can be used by the board
file for board specific initialisation.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-06-08 08:41:56 +02:00
Nikhil Badola
19b17d1254 drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect
Return if USB_MAX_CONTROLLER_COUNT hence the index of the controller
to be initialised is incorrect

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
2015-06-07 15:46:02 +02:00
Tom Rini
43b1ff5f33 Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2015-05-30 20:16:01 -04:00
Masahiro Yamada
b6ef3a3f04 ARM: UniPhier: update the vendor name of UniPhier in Kconfig
The business for UniPhier Soc family has been transferred from
Panasonic Corporation to Socionext Inc.

Update the SoC select menu in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:55:30 +09:00
Masahiro Yamada
f6e7f07c17 ARM: UniPhier: replace <asm/io.h> with <linux/io.h>
In the Linux coding style, it is recommended to include <linux/io.h>
rather than <asm/io.h>.  Follow this trend.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:53:56 +09:00
Peter Griffin
5cfd6c002a usb: dwc2: Add support for v3 snpsid value
This has been tested to the extent that I can enumerate
a asix usb networking adapter and boot a kernel over usb
on the 96boards hikey u-boot port I'm currently doing.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2015-05-29 12:41:04 +02:00
Siva Durga Prasad Paladugu
6a13241635 ci_udc: Update the ci_udc driver to support bulk transfers
Update the ci_udc driver to support bulk transfer
and also added capability of having multiple dtds
if requested data is more than 16K.
These changes are tested for both the DFU and lthor.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-05-29 12:41:04 +02:00
Hans de Goede
bf495712ed usb: ohci: Add support for interrupt queues
Add support for interrupt queues to the ohci hcd code, bringing it inline
with the ehci and musb-new(host) code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:35 -06:00
Hans de Goede
d563e62c34 usb: ohci: Add an ohci_alloc_urb() function
Add an ohci_alloc_urb() function, this is a preparation patch for adding
interrupt queue support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:35 -06:00
Hans de Goede
44dbc33056 usb: ohci: Do not reuse ed for interrupt endpoints of different devices
When submitting interrupt packets to an endpoint we only link in the ed
once to avoid some races surrounding unlinking of periodic endpoints,
but we share one ohci_device struct / one set of ed-s for all devices,
which means that if we have an interrupt endpoint at endpoint 1 with one
device, and a non interrupt endpoint 1 with another device we end up
with the same ed linked into both the periodic and async lists, which is
not good (tm).

This commit switches over to using separate ohci_device structs, and thus
separate ed-s for devices with interrupt endpoints, fixing this.

This fixes e.g. matching a usb storage device and keyboard on the same
usb-1 hub not working.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:35 -06:00
Hans de Goede
6a72e804a2 sunxi: ohci: Add ohci usb host controller support
This commit adds support for the OHCI companion controller, which makes
usb-1 devices directly plugged into to usb root port work.

Note for now this switches usb-keyboard support for sunxi back from int-queue
support to the old interrupt polling method. Adding int-queue support to the
ohci code and switching back to int-queue support is in the works.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-14 18:49:32 -06:00
Hans de Goede
8d837a1f7d sunxi: ehci: Convert to the driver-model
Convert sunxi-boards which use the sunxi-ehci code to the driver-model.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-14 18:49:32 -06:00
Hans de Goede
58b4048f64 usb: ohci: Add dm support
Add driver-model support to the ohci code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:32 -06:00
Hans de Goede
8f761f023c usb: ohci: Skip unnecessary mdelay(1) calls in various places
For some reason the ohci code is full with:

 #ifdef DEBUG
		pkt_print(...)
 #else
		mdelay(1);
 #endif

AFAICT there is no reason for the mdelay(1) calls. This commit disables them
when building the ohci code for new driver-model using boards. It leaves
the mdelay(1) calls in place when building for older boards, so as to avoid
causing any regressions there.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:32 -06:00
Hans de Goede
969bb5bad3 usb: ohci: Remove unnecessary delays from hc_start and power power-on paths
The usb spec says that we must wait a minimum amount of time after port
power on (exact time is in the hub descriptor), this is something which
we must not only do for root ports but also for external hub ports, which
is why the common usb_hub code already waits a full second after powering
up ports. Having a separate wait for just the root hub in the ohci-hcd
code only leads to doing the waiting twice for the root ports, so drop the
wait from the ohci-hcd code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:32 -06:00
Hans de Goede
47976d2c16 usb: ohci: Do not resubmit and leak urbs for interrupt packets
The u-boot usb code uses polling for all endpoints, including interrupt
endpoints, so urbs should never be automatically resubmitted.

This also fixes a leak of the urb, as submit_int_msg() did not check if
an already re-submitted urb exists before creating a new one.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-14 18:49:32 -06:00
Hans de Goede
e253637be7 dm: usb: Do not scan companion buses if no devices where handed over
USB scanning is slow, and there is no need to scan the companion buses
if no usb devices where handed over to the companinon controllers by any
of the main controllers.

This saves e.g. 2 seconds when booting a A10 OLinuxIno Lime with no USB-1
devices plugged into the root usb ports.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
b6de4d1093 dm: usb: Add support for companion controllers
USB companion controllers must be scanned after the main controller has
been scanned, so that any devices which the main controller which to hand
over to the companion have actually been handed over before we scan the
companion.

As there are no guarantees that this will magically happen in the right
order, split the scanning of the buses in 2 phases, first main controllers,
and then companion controllers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
a24a0e9159 dm: usb: Move printing of usb scan status to usb_scan_bus()
Move printing of usb scan status to usb_scan_bus().

This is a preparation patch for adding companion controller support to the
usb uclass.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
8a5f0665da dm: usb: Add support for interrupt queues to the dm usb code
Interrupt endpoints typically are polled for a long time by the usb
controller before they return anything, so calls to submit_int_msg() can
take a long time to complete this.

To avoid this the u-boot code has the an interrupt queue mechanism / API,
add support for this to the driver-model usb code and implement it for the
dm ehci code.

See the added doc comments for more details.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
029fd8ea1f dm: usb: Prefix ehci interrupt-queue functions with _ehci_
This is a preparation patch for adding interrupt-queue support to the
ehci dm code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:31 -06:00
Hans de Goede
45b9ea1da2 usb: Stop reset procedure when a dev is handed over to a companion hcd
Short circuit the retry loop in legacy_hub_port_reset() by returning an
error from usb_control_msg() when a device was handed over to a companion
by the ehci code. This avoids trying to reset low / fullspeed devices 5
times needlessly. Also do not print an error when a device has been handed
over.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:31 -06:00
Hans de Goede
71b945267d usb: Fix handover of full-speed devices from ehci to companion
When after a reset the port status connection bit is still set and the enable
bit is not then we're dealing with a full-speed device and should hand it over
to the companion controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-14 18:49:30 -06:00
Simon Glass
f56da290b8 dm: usb: exynos: Drop legacy USB code
Drop the code that doesn't use driver model for USB.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06 14:00:35 -06:00
Hans de Goede
fa5b9baa0c usb: ohci: Don't log an error on interrupt packet timeout
Interrupts transfers timing out is normal, so do not log an error for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:36 -06:00
Hans de Goede
8d005ef81a usb: ohci: Add proper cache flushing / invalidating for non cache coherent cpus
Add proper cache flushing / invalidating for non cache coherent cpus, for now
only enable this for new (driver-model) usb code to avoid regressions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:36 -06:00
Hans de Goede
cae01cb2a9 usb: ohci: Fix ctrl in messages with a data-len of 0
Fix taken from the Linux kernel ohci driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:35 -06:00
Hans de Goede
6651c14065 usb: ohci: Move static func and var declarations from ohci.h to ohci-hcd.c
Non static function and variable declarations do not belong in a .h file.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:35 -06:00
Hans de Goede
26548bb283 usb: ohci: Remove unnecessary phcca variable
This is a preparation patch for adding driver-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:35 -06:00
Hans de Goede
3c5497d831 usb: ohci: Move the td array struct to inside the ohci_dev struct
This is a preparation patch for adding driver-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:35 -06:00
Hans de Goede
19d95d5729 usb: ohci: Move the ohci_dev struct to inside the main ohci struct
This is a preparation patch for adding driver-model support.

Note we do keep ohci_dev as a separate struct so that we can later add
support for interrupt-queues which requires allocating a separate ohci_dev
per interrupt-queue.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:34 -06:00
Hans de Goede
c5613df585 usb: ohci: Pass around a pointer to ohci_t rather then accessing global vars
This is a preparation patch for adding driver-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:34 -06:00
Hans de Goede
69710ce3ee usb: ohci: Remove unused devgone global variable
devgone is never assigned a value, so the one comparisson reading it will
never be true, and devgone can be completely removed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-05-06 12:48:34 -06:00
Hans de Goede
cb8a2c148a dm: usb: Set desc_before_addr from ehci dm code
Without this usb-1 device descriptors do not get read properly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:42 -06:00
Hans de Goede
fcdd8aaa48 dm: usb: Fix finding of first upstream usb-2 hub in the ehci dm code
The ehci driver model code for finding the first upstream usb-2 hub before
this commit has a number of issues:

1) "if (!ttdev->speed != USB_SPEED_HIGH)" does not work because the '!'
   takes presedence over the '!=' this should simply be
   "if (ttdev->speed == USB_SPEED_HIGH)"
2) It makes ttdev point to the first upstream usb-2 hub, but ttdev should
   point to the last usb-1 device before the first usb-2 hub (when going
   upstream from the device), as ttdev is used to find the port of the
   first usb-2 hub to which the the last usb-1 device is connected.
3) parent_devnum however should be set to the devnum of the first usb-2
   hub, so we need to keep pointers around to both usb_device structs.

To complicate things further during enumeration usb_device.dev will point
to the parent udevice, where as during normal use it will point to
the actual udevice, we must handle both cases correctly.

This commit fixes all this making usb-1 devices attached to usb-2 hubs,
including usb-1 devices attached to usb-1 hubs attached to usb-2 hubs, work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:42 -06:00
Hans de Goede
25c8ebdfcd dm: usb: Use usb_get_bus in dm ehci code
Use usb_get_bus in dm ehci code rather then re-implementing it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Hans de Goede
7f1a07538f dm: usb: Copy over usb_device values from usb_scan_device() to final usb_device
Currently we copy over a number of usb_device values stored in the on stack
struct usb_device probed in usb_scan_device() to the final driver-model managed
struct usb_device in usb_child_pre_probe() through usb_device_platdata, and
then call usb_select_config() to fill in the rest.

There are 3 problems with this approach:

1) It does not fill in enough fields before calling usb_select_config(),
specifically it does not fill in ep0's maxpacketsize causing a div by zero
exception in the ehci driver.

2) It unnecessarily redoes a number of usb requests making usb probing slower

3) Calling usb_select_config() a second time fails on some usb-1 devices
plugged into usb-2 hubs, causing u-boot to not recognize these devices.

This commit fixes these issues by removing (*) the usb_select_config() call
from usb_child_pre_probe(), and instead of copying over things field by field
through usb_device_platdata, store a pointer to the in stack usb_device
(which is still valid when usb_child_pre_probe() gets called) and copy
over the entire struct.

*) Except for devices which are explictly instantiated through device-tree
rather then discovered through usb_scan_device() such as emulated usb devices
in the sandbox.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Hans de Goede
f78a5c0774 dm: usb: Make usb_get_bus easier to use for callers
Make usb_get_bus easier to use for callers, by directly returning the bus
rather then returning it via a pass-by-ref argument.

This also removes the error checking from the current callers, as
we already have an assert() for bus not being NULL in usb_get_bus().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Hans de Goede
134692af13 dm: usb: Do not use bus->seq before device_probe(bus)
Do not use bus->seq before device_probe(bus), as bus->seq is not set until
after the device_probe() call. This fixes u-boot printing: "USB-1:   " for
each bus it scans.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Tom Rini
d81572c272 Merge git://git.denx.de/u-boot-mpc85xx 2015-05-05 14:57:23 -04:00