Commit graph

22 commits

Author SHA1 Message Date
Luca Ceresoli
9985b74bf6 i2c: muxes: pca954x: support PCA9543 I2C switch
The PCA9543 is a 2-channel I2C switch.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher<hs@denx.de>
2019-04-11 15:21:33 +02:00
Luca Ceresoli
5995cdb167 i2c: muxes: pca954x: clarify enable field
The chip_desc.enable field is used only for muxes, not for switches.
Document it and remove the unused values.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher<hs@denx.de>
2019-04-11 15:21:33 +02:00
Luca Ceresoli
4cdf4e0655 i2c: muxes: pca954x: update list of supported devices
The Kconfig help has not been updated while adding PCA9547 and PCA9646.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher<hs@denx.de>
2019-04-11 15:21:33 +02:00
Michal Simek
c4bd12a7da i2c: mux: Generate longer i2c mux name
For !DM case busses are listed as
ZynqMP> i2c bus
Bus 0:	zynq_0
Bus 1:	zynq_0->PCA9544A@0x75:0
Bus 2:	zynq_0->PCA9544A@0x75:1
Bus 3:	zynq_0->PCA9544A@0x75:2
Bus 4:	zynq_1
Bus 5:	zynq_1->PCA9548@0x74:0
Bus 6:	zynq_1->PCA9548@0x74:1
Bus 7:	zynq_1->PCA9548@0x74:2
Bus 8:	zynq_1->PCA9548@0x74:3
Bus 9:	zynq_1->PCA9548@0x74:4
Bus 10:	zynq_1->PCA9548@0x75:0
Bus 11:	zynq_1->PCA9548@0x75:1
Bus 12:	zynq_1->PCA9548@0x75:2
Bus 13:	zynq_1->PCA9548@0x75:3
Bus 14:	zynq_1->PCA9548@0x75:4
Bus 15:	zynq_1->PCA9548@0x75:5
Bus 16:	zynq_1->PCA9548@0x75:6
Bus 17:	zynq_1->PCA9548@0x75:7

where is exactly describing i2c bus topology.
By moving to DM case i2c mux buses are using names from DT and because
i2c-muxes describing sub busses with the same names like i2c@0, etc it
is hard to identify which bus is where.
Linux is adding topology information to i2c-mux busses to identify them
better.
This patch is doing the same and composing bus name with topology
information.

When patch is applied with topology information on zcu102-revA.
ZynqMP> i2c bus
Bus 0:	i2c@ff020000
   20: gpio@20, offset len 1, flags 0
   21: gpio@21, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 2:	i2c@ff020000->i2c-mux@75->i2c@0
Bus 3:	i2c@ff020000->i2c-mux@75->i2c@1
Bus 4:	i2c@ff020000->i2c-mux@75->i2c@2
Bus 1:	i2c@ff030000  (active 1)
   74: i2c-mux@74, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 5:	i2c@ff030000->i2c-mux@74->i2c@0  (active 5)
   54: eeprom@54, offset len 1, flags 0
Bus 6:	i2c@ff030000->i2c-mux@74->i2c@1
Bus 7:	i2c@ff030000->i2c-mux@74->i2c@2
Bus 8:	i2c@ff030000->i2c-mux@74->i2c@3
Bus 9:	i2c@ff030000->i2c-mux@74->i2c@4
Bus 10:	i2c@ff030000->i2c-mux@75->i2c@0
Bus 11:	i2c@ff030000->i2c-mux@75->i2c@1
Bus 12:	i2c@ff030000->i2c-mux@75->i2c@2
Bus 13:	i2c@ff030000->i2c-mux@75->i2c@3
Bus 14:	i2c@ff030000->i2c-mux@75->i2c@4
Bus 15:	i2c@ff030000->i2c-mux@75->i2c@5
Bus 16:	i2c@ff030000->i2c-mux@75->i2c@6
Bus 17:	i2c@ff030000->i2c-mux@75->i2c@7

Behavior before the patch is applied.
ZynqMP> i2c bus
Bus 0:	i2c@ff020000
   20: gpio@20, offset len 1, flags 0
   21: gpio@21, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 2:	i2c@0
Bus 3:	i2c@1
Bus 4:	i2c@2
Bus 1:	i2c@ff030000  (active 1)
   74: i2c-mux@74, offset len 1, flags 0
   75: i2c-mux@75, offset len 1, flags 0
Bus 5:	i2c@0  (active 5)
   54: eeprom@54, offset len 1, flags 0
Bus 6:	i2c@1
Bus 7:	i2c@2
Bus 8:	i2c@3
Bus 9:	i2c@4
Bus 10:	i2c@0
Bus 11:	i2c@1
Bus 12:	i2c@2
Bus 13:	i2c@3
Bus 14:	i2c@4
Bus 15:	i2c@5
Bus 16:	i2c@6
Bus 17:	i2c@7

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-02-11 09:38:23 +01:00
Michal Simek
58dc4a99b7 i2c: mux: Covert to livetree functions
Updates i2c muxes drivers to support livetree.
Similar changes were done by:
"net: zynq_gem: convert to use livetree"
(sha1: 26026e695a)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-15 09:06:28 +01:00
Simon Goldschmidt
004167048d kconfig: fix typo 'parition'
Replaced misspelled words "parition"/"paritioning" (missing 't') in two
Kconfig files by correct words "partition"/"partitioning"

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-17 09:22:35 -04:00
Peng Fan
16f513ee78 i2c-mux: pca954x: support pca9646 i2c switch
Add the PCA9646 support, which is 2-wire bus switch and buffered 4-channel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-08-06 14:28:20 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Chris Packham
5bc90a8953 i2c: muxes: pca954x: look up width from chip_desc
Commit 8e6eda7cda ("drivers/i2c/muxes/pca954x: Add pca9547 I2C mux
support") introduced a chip_desc for the pca954x devices but failed to
update pca954x_ofdata_to_platdata() to be aware of it. Make
pca954x_ofdata_to_platdata() lookup the chip_desc to validate the device
width.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Marek Behun <marek.behun@nic.cz>
2017-10-11 06:17:22 +02:00
Moritz Fischer
36bdeb75a4 i2c: muxes: pca954x: Add support for GPIO reset line
This commit adds support for GPIO reset lines matching the
common linux "reset-gpios" devicetree binding.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 05:35:48 +02:00
Peng Fan
a430556ecb i2c: muxes: add i2c gpio multiplexer driver
Add an i2c mux driver providing access to i2c bus segments using a
hardware MUX sitting on a master bus and controlled through gpio pins.

E.G. something like:

         ----------              ----------  Bus segment 1   - - - - -
        |          | SCL/SDA    |          |-------------- |           |
        |          |------------|          |
        |          |            |          | Bus segment 2 |           |
        |  Linux   | GPIO 1..N  |   MUX    |---------------   Devices
        |          |------------|          |               |           |
        |          |            |          | Bus segment M
        |          |            |          |---------------|           |
         ----------              ----------                  - - - - -

SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M
according to the settings of the GPIO pins 1..N.

Note commit log from kernel
commit 92ed1a76("i2c: Add generic I2C multiplexer using GPIO API")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX6QP-Sabreauto)
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2017-08-23 07:04:56 +02:00
Marek Behún
8e6eda7cda drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support
This I2C mux is found, for example, on the Turris Omnia board.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-07-12 06:56:48 +02:00
Simon Glass
45a26867e8 dm: core: Update device_bind_driver_to_node() to use ofnode
Adjust this function to us an ofnode instead of an offset, so it can be
used with livetree. This involves updating all callers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01 07:03:08 -06:00
Simon Glass
e160f7d430 dm: core: Replace of_offset with accessor
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-02-08 06:12:14 -07:00
Moritz Fischer
12e8d58415 i2c: mux: Allow muxes to work as children of i2c bus without i2c-parent
For mux check if the parent is already a device of UCLASS_I2C and if yes
just use that. Otherwise see if someone specified an i2c-parent phandle.
This mimics the behavior found in the Kernel, as it removes the
requirement to explicitly specify a i2c-parent phandle.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: u-boot@lists.denx.de
2017-01-18 06:37:57 +01:00
Simon Glass
2651a052d8 i2c: Drop redundant platform data setting in drivers
The i2c uclass has a default setting for per_child_platdata_auto_alloc_size
so drivers do not need to set it. Remove this from drivers to avoid
confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-12 06:41:41 +02:00
Michal Simek
d79ac32478 i2c: muxes: Add support for TI PCA954X mux
Add support for common TI i2c mux which is available on ZynqMP zcu102
board.
DM i2c mux core code is selecting/deselecting bus before/after
every command is performed that's why only one channel is active at a
time. That's also the reason why deselect is just disable all available
channels.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-17 08:28:50 +02:00
Simon Glass
4082fce924 dm: i2c: Allow muxes to be enabled for SPL separately
Since I2C muxes are seldom needed in SPL, and the code for this increases
the size somewhat, add a separate option to enable I2C muxes for SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Michal Simek
0305be1087 Kconfig: i2c: Fix indentation
Use tabs instead of space for indentation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-11 06:30:01 +01:00
Michal Simek
61d815a2cb Kconfig: i2c: Fix typo Suport -> Support
Fix typo in command description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-11 06:29:54 +01:00
Simon Glass
b725dc458f i2c: Add a mux for GPIO-based I2C bus arbitration
While I2C supports multi-master buses this is difficult to get right.
The implementation on the master side in software is quite complex.
Clock-stretching and the arbitrary time that an I2C transaction can take
make it difficult to share the bus fairly in the face of high traffic.
When one or more masters can be reset independently part-way through a
transaction it is hard to know the state of the bus.

This driver provides a scheme based on two 'claim' GPIOs, one driven by the
AP (Application Processor, meaning the main CPU) and one driven by the EC
(Embedded Controller, a small CPU aimed at handling system tasks). With
these they can communicate and reliably share the bus. This scheme has
minimal overhead and involves very little code. It is used on snow to
permit the EC and the AP to share access to the main system PMIC and
battery. The scheme can survive reboots by either side without difficulty.
This scheme has been tested in the field with millions of devices.

Since U-Boot runs on the AP, the terminology used is 'our' claim GPIO,
meaning the AP's, and 'their' claim GPIO, meaning the EC's. This terminology
is used by the device tree bindings in Linux also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:10 -06:00
Simon Glass
3d1957f0ea dm: i2c: Add support for multiplexed I2C buses
Add a new I2C_MUX uclass. Devices in this class can multiplex between
several I2C buses, selecting them one at a time for use by the system.
The multiplexing mechanism is left to the driver to decide - it may be
controlled by GPIOs, for example.

The uclass supports only two methods: select() and deselect().

The current mux state is expected to be stored in the mux itself since
it is the only thing that knows how to make things work. The mux can
record the current state and then avoid switching unless it is necessary.
So select() can be skipped if the mux is already in the correct state.
Also deselect() can be made a nop if required.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:10 -06:00