Commit graph

568 commits

Author SHA1 Message Date
Shivamurthy Shastri
720fcb27e0 mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
the Continuous Read mode.

Some of the Micron SPI NAND devices have the "Continuous Read" feature
enabled by default, which does not fit the subsystem needs.

In this mode, the READ CACHE command doesn't require the starting column
address. The device always output the data starting from the first
column of the cache register, and once the end of the cache register
reached, the data output continues through the next page. With the
continuous read mode, it is possible to read out the entire block using
a single READ command, and once the end of the block reached, the output
pins become High-Z state. However, during this mode the read command
doesn't output the OOB area.

Hence, we disable the feature at probe time.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-20 22:28:33 +05:30
Vignesh Raghavendra
5d25784998 soc: ti: k3-ringacc: Add an API to request pair of rings
Add new API k3_ringacc_request_rings_pair() to request pair of rings at
once, as in the most case Rings are used with DMA channels which required
to request pair of rings - one to feed DMA with descriptors (TX/RX FDQ) and
one to receive completions (RX/TX CQ). This will allow to simplify Ringacc
API users.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13 20:58:34 +05:30
Tom Rini
3113c84ba2 - add support for PCI and XHCI for RPi4 (64 bit only)
- optionally reset XHCI device on registration
 - enable USB_KEYBOARD for rpi_4_defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl8Ifk0SHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+160QAK85hENUpOft76dZ+SwKp1EF4K6yn7Uq
 7OuO3k9PlzYamWDrJuRlvUp2ZkQPU0umT7NA+DfIOCrcXpdU/nltlhZMlaSXIXIp
 NbsoSLZxGz1xKdKITZJupCMTj+rHP4/ZO96EQ9ajuNQ56TLmxSbbU6rpJtwm98Gx
 mXOUTSx3UOHRyRv7R1U/LGNfxHnXwK8tpP+sCppHGRkl2ypkKSM9mjPRmBfPLGgM
 s0TDm2XcPtiTK/YOR5FpuXsjlg+eUxhpSkH9Tvj49BkGPgIUeGYgWkc/1d6Aip1E
 liuQYvRtK/cZLhtaWPyW8JPentyv54rIbFQ7weZbsTMDGUfX4k5VJC+ucsWiG3aa
 XaWO83woOG+nYIv6hNodXT9i5TmfOJYHHC64nqMMGx0n5Ouz3oQ2UhXVLMFihyG0
 xgOprEVqMBvgxdOGVyEyFO3qtut2zPQTkFTZZoUNrEYcGO3rtrhAMI2KY4TVMfQe
 CyZ4DMMMAC3aSvL2VD5s3YkD//j8sXdt75qnSeS3AVbEKJgmcWP6A59FFDZ6cCmY
 Nturw8Cfn8axvQAkR9v7yhX2HeItO6n5YWhayoxa+Bo5mjjEZEMT5mrZhKAWposl
 XBZgb4Xr6fp1N2AZf7/b60jxwD0ogTIjxX4Ez2d43ehhHqPNZ5sGrC6kIrpu0U9U
 NKcCxgGjlQBA
 =2aS6
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

- add support for PCI and XHCI for RPi4 (64 bit only)
- optionally reset XHCI device on registration
- enable USB_KEYBOARD for rpi_4_defconfig
2020-07-10 14:31:22 -04:00
Nicolas Saenz Julienne
c92921bb52 linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian
Imports Al Viro's original Linux commit 00b0c9b82663a, which contains
an in depth explanation and two fixes from Johannes Berg:
 e7d4a95da86e0 "bitfield: fix *_encode_bits()",
 37a3862e12382 "bitfield: add u8 helpers".

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
[s.nawrocki: added empty lines between functions and macros]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
[mb: squash fix including byteorder.h]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-07-10 11:47:12 +02:00
Rasmus Villemoes
7842749c35 linux/kconfig.h: create two- and three-argument versions of CONFIG_IS_ENABLED
This adds a bunch of preprocessor magic to extend the capabilities of
CONFIG_IS_ENABLED. The existing semantics of

  CONFIG_IS_ENABLED(FOO)

expanding to a 1 or 0 (depending on build context and the defined-ness
or not of the appropriate CONFIG_FOO/CONFIG_SPL_FOO/CONFIG_TPL_FOO)
are of course preserved. With this, one is also allowed a two-argument
form

  CONFIG_IS_ENABLED(FOO, (something))

which expands to something precisely when CONFIG_IS_ENABLED(FOO) would
expand to 1, and expands to nothing otherwise. It is, in other words,
completely equivalent to the three lines

  #if CONFIG_IS_ENABLED(FOO)
  something
  #endif

The second argument must be parenthesized in order to allow any
tokens, including a trailing comma, to appear - one use case for this
is precisely to make it a bit more ergonomic to build an array and
only include certain items depending on .config. That should increase
both readability and not least "git grep"ability.

A third variant is also introduced,

  CONFIG_IS_ENABLED(FOO, (xxx), (yyy))

which corresponds to

  #if CONFIG_IS_ENABLED(FOO)
  xxx
  #else
  yyy
  #endif

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09 12:33:24 +08:00
Rasmus Villemoes
7d78a4547d linux/kconfig.h: remove unused helper macros
U-Boot does not have loadable modules, and nothing currently uses any
of the (CONFIG_)?IS_(BUILTIN|MODULE) macros - only
the (CONFIG_)?IS_ENABLED variants are ever used.

While I understand the desire to keep this somewhat synchronized with
linux, we've already departed by the introduction of the
CONFIG_IS_ENABLED extra logic, and deleting these makes the next patch
much simpler, since I won't have to duplicate a lot of logic for no
real gain (as there are no users).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09 12:33:24 +08:00
Rasmus Villemoes
b4f73886c4 linux/kconfig.h: simplify logic for choosing CONFIG_{SPL_, TPL_, }*
Instead of using the arg1_or_junk trick to pick between two choices,
with a bit of duplication between the branches (and most of the
CONFIG_TPL_BUILD case being redundant, as _IS_TPL is known to be
defined to 1 in that case), simply define a prefix that we inject
between CONFIG_ and the given config symbol.

This only requires one level of indirection (to get the
_CONFIG_PREFIX macro expanded before the token concatenation takes
place), and makes it easy to, say, introduce a CONFIG_HOSTTOOL_
prefix. [I would expect most HOSTTOOL_ symbols to just be def_bool y,
but it would allow us to clean up some of the ifdef HOSTCC mess in the
sources shared between U-Boot and host tools.]

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09 12:33:24 +08:00
Tom Rini
72c4d40d8c compilers: Introduce options for forcing inlining on SPL/TPL
There are cases where when we allow the compiler to decide about making
inline decisions rather than forcing them it can save us space.

For now, we keep the default values for inlining that we have had
historically.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-01 11:48:05 -04:00
Tom Rini
1f1a0f3db3 compiler_types.h: Re-introduce CONFIG_OPTIMIZE_INLINING for U-Boot
In the Linux kernel, support for forcing inline functions to be made
inline, rather than allowing the compiler to make its own choice has
been removed.  With respect to performance, modern GCC (and Clang) do a
good job at deciding when to, or not to, inline code and there are no
run-time requirements in Linux anymore.

There is one downside to this, which is final binary size.  On average
in U-Boot removing this support grows SPL by almost 1 kilobyte.  But
there are cases where it shrinks the binary by making better inline
choices than we had forced.

Start by re-introducing CONFIG_OPTIMIZE_INLINING as a global which
essentially reverts 889b3c1245de ("compiler: remove CONFIG_OPTIMIZE_INLINING entirely")
from Linux.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-01 11:48:05 -04:00
Tom Rini
67f51b40ca compiler*.h: sync include/linux/compiler*.h with Linux 5.7-rc5
Copy these from Linux v5.7-rc5 tag.

This brings in some handy new attributes and is otherwise important to
keep in sync.

We drop the reference to smp_read_barrier_depends() as it is not
relevant on the architectures we support at this time, based on where
it's implemented in Linux today.  We drop the call to kasan_check_read()
as that is not relevant to U-Boot as well.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-01 11:48:05 -04:00
Masahiro Yamada
1c078ad7d9 psci: add 'static inline' to invoke_psci_fn() stub
Avoid potential multiple definitions when CONFIG_ARM_PSCI_FW
is disabled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-06-23 14:43:24 -04:00
Simon Glass
6d39fccc17 dma-mapping: Add header file for ARCH_DMA_MINALIGN
This is defined in the asm/cache.h header file. Update this header file to
include it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2020-06-02 13:06:11 -04:00
Frank Wang
646979425a usb: dwc3: amend UTMI/UTMIW phy interface setup
Let move 8/16-bit UTMI+ interface initialization into DWC3 core init
that is convenient for both DM_USB and u-boot traditional process.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29 18:13:19 +08:00
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
eb41d8a1be common: Drop linux/bug.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Jagan Teki
ce786ae391 iopoll: Add readl_poll_sleep_timeout
Add readl poll API with sleep and timeout support.

This change is referenced from Linux from below commit:
commit <5f5323a14cad19323060a8cbf9d96f2280a462dd> ("iopoll:
introduce read_poll_timeout macro")

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-11 01:30:49 +05:30
Jagan Teki
c094e219a8 iopoll: Add dealy to read poll
Some drivers and other bsp code not only poll the
register with timeout but also required to delay
on each transaction.

This patch add that requirement by adding sleep_us
variable so-that read_poll_timeout now support
delay as well.

This change is referenced from Linux from below commit:
commit <5f5323a14cad19323060a8cbf9d96f2280a462dd> ("iopoll:
introduce read_poll_timeout macro")

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-11 01:30:49 +05:30
Jagan Teki
54232474d6 iopoll: Add read_poll_timeout common API
Add read_poll_timeout common API similar to Linux iopoll.

readx_poll_timeout will trigger read_poll_timeout with
proper op. This will help to extend the functionalities
like sleep_us to poll timeout in future.

This change is referenced from Linux from below commit:
commit <5f5323a14cad19323060a8cbf9d96f2280a462dd> ("iopoll:
introduce read_poll_timeout macro")

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-11 01:30:49 +05:30
Jagan Teki
5bf3f3dd11 mtd: spi-nor: Enable QE bit for ISSI flash
Enable QE bit for ISSI flash chips.

QE enablement logic is similar to what Macronix
has, so reuse the existing code itself.

Cc: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-30 22:34:20 +05:30
Robert Marko
8912710484 mtd: spi-nand: Import Toshiba SPI-NAND support
Linux has good support for Toshiba SPI-NAND, so lets import it.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Masahiro Yamada
64045a6a17 libfdt: split fdt_region declarations out to <fdt_region.h>
fdt_region APIs are not part of libfdt. They are U-Boot extension
for the verified boot. Split the declarations related to fdt_region
out of <fdt_region.h>. This allows <linux/libfdt.h> to become a
simple wrapper file, like Linux does.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-26 14:24:08 -06:00
Tom Rini
2b18b89156 Merge branch 'next' of git://git.denx.de/u-boot-usb into next 2020-03-31 17:24:19 -04:00
Kever Yang
ac28e59a57 usb: Migrate to support live DT for some driver
Use ofnode_ instead of fdt_ APIs so that the drivers can support live DT.
This patch updates usb_get_dr_mode() and usb_get_maximum_speed() to use
ofnode as parameter instead of fdt offset. And all the drivers who use
these APIs update to use live dt APIs at the same time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-30 03:48:53 +02:00
Lokesh Vutla
11e47de3c9 firmware: tisci: Drop all deprecated messages
SYSFW v2020.01 and later versions no longer supports the below messages:
- TI_SCI_MSG_RM_RING_GET_CFG
- TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG   0x1206
- TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG   0x1216
- TISCI_MSG_RM_UDMAP_FLOW_GET_CFG        0x1232
- TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG    0x1233

There are no users in U-Boot for any of the above messages, So drop the
support for all the corresponding messages.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-03 13:08:14 +05:30
Masahiro Yamada
9d86b89c59 dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>
The implementation of dma_map_single() and dma_unmap_single() is
exactly the same for all the architectures that support them.

Factor them out to <linux/dma-mapping.h>, and make all drivers to
include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>.

If we need to differentiate them for some architectures, we can
move the generic definitions to <asm-generic/dma-mapping.h>.

Add some comments to the helpers. The concept is quite similar to
the DMA-API of Linux kernel. Drivers are agnostic about what is
going on behind the scene. Just call dma_map_single() before the
DMA, and dma_unmap_single() after it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19 21:27:30 +08:00
Simon Glass
f217651575 dm: core: Drop the inclusion of linux/compat.h in dm.h
Most files don't need this header and it pulls in quite of lots of stuff,
malloc() in particular. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 21:48:22 -07:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
f72bdc60b2 sandbox: Rename strdup() functions
These functions include calls to a memory-allocation routine and so need
to use the system routine when called from a library.

To preserve access to these functions for libraries that need it, such as
SDL, rename these functions within U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
1ea1c7d80f string: Allow arch override of strndup() also
At present architectures can override strdup() but not strndup(). Use
the same option for both.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
8d38a8459b mtd: Rename free() to rfree()
This function name conflicts with our desire to #define free() to
something else on sandbox. Since it deals with resources, rename it to
rfree().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Vignesh Raghavendra
658df8bd94 mtd: spi-nor-core: Add octal mode support
Add support for Octal flash devices. Octal flash devices use 8 IO lines
for data transfer. Currently only 1-1-8 Octal Read mode is supported.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-27 22:27:22 +05:30
Sean Anderson
9fca6729c6 clk: Include missing headers for linux/clk-provider.h
This header was missing a couple of include dependencies when included on its
own.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-01-26 12:03:06 +01:00
Tom Rini
07add22cab Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x
2020-01-20 14:54:55 -05:00
Vignesh Raghavendra
016e6d6a4f lib: Import few bitmap functions from Linux
Import few basic bitmap functions (bitmap_{weight,fill,set,clear,or}())
and their dependencies from Linux. These are required for upcoming DMA
resource allocation support for TI's K3 SoCs.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Simon Glass
6df75135b5 common: Move ROUND() into kernel.h
Move this macro in with all the other rounding macros.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 17:53:52 -05:00
Simon Glass
825faebbdf common: Move check_member() to kernel.h
The kernel.h file has a number of useful macros including a few related
to structures. Move check_member() there too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 17:53:52 -05:00
Simon Glass
4cf7f12989 common: Move type declarations to linux/types.h
This file already has lots of type declarations so it seems better to put
all of them there.

Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:25 -05:00
Tudor Ambarus
a11c081da3 mtd: spi: spi-nor-core: Add SST vendor specific SFDP parser
JESD216 allow vendors to define their own SFDP tables.

Add SST SFDP parser. The vendor table is allocated using resource-managed
kmalloc - the table will be freed on driver detach. It will be accessible
by getting the UCLASS_SPI_FLASH's private data.

The SST's SFDP table is particularly of interest because contains
pre-programmed globally unique EUI-48 and EUI-64 identifiers.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-12-17 09:49:05 +02:00
Tom Rini
ac1ca99926 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-net 2019-12-09 13:48:22 -05:00
Vignesh Raghavendra
5e6d9ccde9 dma: ti: k3-udma: Implement dma_get_cfg() interface
Implement dma_get_cfg() interface to pass flow id information for DMA
clients to use. This is needed because on K3 SoCs, CPSW (ethernet) and
UDMA (DMA provider) support "flows" within a given RX DMA channel. This
allows different network packets to be segregated while using same RX
DMA channel. In order for basic ethernet to work, CPSW slave must be
aware of the flow ID allocated for the RX channel by the DMA driver.
This interface allows CPSW to query flow ID from DMA provider and
configure it in CPSW HW.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-09 09:47:43 -06:00
Heinrich Schuchardt
37db55b7e9 linux/types.h: fix typo unchar
unsigned char should be called uchar and not unchar.

This fixes a build error in lib/crypto/x509_cert_parser.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-09 10:35:30 -05:00
AKASHI Takahiro
a9b45e6e83 lib: add oid registry utility
Imported from linux kernel v5.3:
 build_OID_registry without changes
 oid_registry.h without changes
 oid_registry.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
2b12196dc1 cmd: add asn1_compiler
Imported from linux kernel v5.3:
 asn1.h without changes
 asn1_ber_bytecode.h without changes
 asn1_decoder.h without changes
 asn1_compiler.c without changes

This host command will be used to create a ASN1 parser, for example,
for pkcs7 messages or x509 certificates. More specifically, it will
generate *byte code* which will be interpreted by asn1 decoder library.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
bd3c3dd7fb linux/time.h: include vsprintf.h
Without this commit, time.h possibly causes a build error as
asctime_r() uses sprintf().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
29852bfc22 include: kernel.h: include printk.h
Adding "printk.h" will help improve portability from linux kernel
code (in my case, lib/asn1_decoder.c and others) where printf and
pr_* variant functions are used.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
1872311727 lib: add mktime64() for linux compatibility
This function will be used  in lib/crypto/x509_cert_parser.c, which
will also be imported from linux code in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
Miquel Raynal
eb446ef625 cmd: nand/sf: isolate legacy code
The 'sf' command is not supposed to rely on the MTD stack, but both
'sf' and 'nand' commands use helpers located in mtd_uboot.c. Despite
their location, these functions do not depend at all on the MTD
stack.

This file (drivers/mtd/mtd_uboot.c) is only compiled if CONFIG_MTD is
selected, which is inconsistent with the current situation. Solve this
by moving these three functions (which are only used by the above two
commands) out of mtd_uboot.c and put them in a C file only compiled
with cmd/sf.c and cmd/nand.c.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Don't export get_part function now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 17:10:51 -05:00
Simon Glass
68a6aa85ec common: Move mii_init() function out of common.h
This function belongs in mii.h so move it over.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:13 -05:00
Simon Glass
c3a4d1c3ee common: Drop linux/crc8.h
We have an existing U-Boot header for the one function that this defines.
Use that instead of the linux/ one. Move over the nice comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:07 -05:00