Commit graph

363 commits

Author SHA1 Message Date
Wolfgang Denk
d1a24f0618 Minor Coding Style Cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-02 22:36:10 +01:00
Stefano Babic
58c758fe5a mxc_nand: add support for i.MX35 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
2011-02-02 00:54:42 +01:00
Peter Tyser
eddf52b593 Replace "FLASH" strings with "Flash" or "flash"
There's no compelling reason to have the output on bootup or the
"flinfo" command print "flash" in uppercase, so use the proper case
where appropriate.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2011-01-19 00:02:37 +01:00
Lei Wen
245eb90091 mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()
This patch sync with David's patch on Linux for handling nand_scan_ident.

	commit 5e81e88a4c140586d9212999cea683bcd66a15c6
	Author: David Woodhouse <David.Woodhouse@intel.com>
	Date:   Fri Feb 26 18:32:56 2010 +0000

	mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()

	Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-01-12 17:13:10 -06:00
Lei Wen
47fc18f1e7 NAND: add the ability to directly write yaffs image
This patch add addition suffix to nand write to give the uboot
the power to directly burn the yaffs image to nand.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-01-12 17:13:10 -06:00
Alexander Holler
7fab9dfffa nand: fix bug with multiple NAND devices if CONFIG_MTD_DEVICE is defined.
The variable i has to be static, otherwise it would be always zero.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
2011-01-12 17:13:10 -06:00
David Müller
3b8b240ddb add AM29F400BB to table of supported legacy flashs
Signed-off-by: David Mueller <d.mueller@elsoft.ch>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-01-11 10:43:31 +01:00
Mike Frysinger
4ffeab2cc0 cfi_flash: avoid flash_verbose when possible
The flash_verbose logic is only used by the CFI MTD layer, so if we aren't
using that, disable the logic completely.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-09 18:05:11 +01:00
Reinhard Meyer
7a8fc36e6c MTD/NAND: fix nand_base.c to use get_timer() correctly
This is part of the timer cleanup effort.
In the future we only use get_timer() in its intended way to
program timeout loops.
reset_timer() shall not be used anymore.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-12-17 14:32:12 -06:00
Mike Frysinger
0bdecd82dd nand: constify id/manu tables
These id tables need not be writable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 14:32:11 -06:00
Wolfgang Denk
6afde8bfd0 Merge branch 'next' of git://www.denx.de/git/u-boot-cfi-flash into next 2010-12-17 20:11:54 +01:00
Wojtek Skulski
93eab86bfd sf: winbond: add support for W25Q16/32/128 parts
While we're here, cut out the useless id defines too.

Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 08:53:55 -05:00
Chong Huang
d1d9065647 sf: new driver for EON devices
Signed-off-by: Chong Huang <chuang@ucrobotics.com>
Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 08:53:55 -05:00
Stefan Roese
6f726f9584 cfi_flash: Add optional config register write to cfi-detection
This patch adds the possibility to (optinally) write to the
flash configuration register. The Intel style CFI chips support
such a register that can be used to configure the operation
mode to a non-default value.

This method will be used by the t3corp board, which needs to
configure the DS617 Xilinx flash for async read mode.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:56:05 +01:00
Stefan Roese
4d2ca9d6a0 cfi_flash: Use flash_read32() in sector_erased()
The function sector_erased() is modified to not use pointer
access, but to use the correct accessor functions. This fixes a
problem on the t3corp board with the Xilinx DS617 flash chips. Here
a board specific accessor function is needed to read from flash
in 32bit mode. This patch enables such an operation mode.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:54:10 +01:00
Stefan Roese
df4e813b72 cfi_flash: Fix problems with status/id read mode
This patch adds some calls to set the flash chip in the read-status-
register- or read-id-mode before the corresponding register is
read back. This problem was detected while porting the common CFI
driver to support the Xilinx DS617 flash chips.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-17 09:54:03 +01:00
John Schmoller
9fd84915a9 fsl_upm: Add MxMR/MDR synchronization
According to Freescale reference manuals (eg section "13.4.4.2
Programming the UPMs" of the P4080 Reference Manual):

"Since the result of any update to the MxMR/MDR register must be in
effect before the dummy read or write to the UPM region, a write to
MxMR/MDR should be followed immediately by a read of MxMR/MDR."

The UPM on a custom P4080-based board did not work without performing
a read of MxMR/MDR after a write.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-12-13 09:32:15 -06:00
David Müller (ELSOFT AG)
2111cb44a7 fix s3c2410_nand timing default values
The attached patch fixes wrong timing default values and adds the
possibility to specify board specific timing value in the board config file.

Signed-off-by: David Mueller <d.mueller@elsoft.ch>
2010-12-06 18:28:48 -06:00
Anatolij Gustschin
34bbb8fb46 cfi_flash: fix bug introduced while recent change to flash_get_size()
commit ec50a8e389
"cfi_flash: handle 'chip size exceeds address window' situation"
added 3rd argument to flash_get_size() but didn't fix all the
function calls from the board specific code. Many boards have
their own flash_get_size() definitions in the board code and
use them there, but some boards (e.g. tqm834x, tqm85xx, pdm360ng)
use flash_get_size() from the cfi_flash.c driver.

The bug shows up if the value of the "max_size" argument (which
is not defined when calling the function with two arguments)
happens to be less than "info->size". In this case on the
affected boards we end up with a bank of reduced size and
in the worst case might even be not able to update U-Boot or
to boot the kernel from flash:

=> fli

Bank # 1: CFI conformant FLASH (32 x 16)  Size: 0 kB in 1 Sectors
  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 3 ms, buffer size: 64 bytes

  Sector Start Addresses:
  F0000000   RO

Bank # 2: CFI conformant FLASH (32 x 16)  Size: 128 MB in 512 Sectors
  AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 3 ms, buffer size: 64 bytes

  Sector Start Addresses:
  F8000000        F8040000        F8080000        F80C0000        F8100000
  F8140000        F8180000        F81C0000        F8200000        F8240000
  ...

E.g., updating U-Boot is not possible now:

=> protect off ${u-boot_addr} +${u-boot_size}
Error: end address (0xf007ffff) not in flash!
Bad address format
=> era ${u-boot_addr} +${u-boot_size}
Error: end address (0xf007ffff) not in flash!
Bad address format

This patch removes the 3rd argument of flash_get_size() again
and sets "max_size" in the function itself instead of passing
it as a function argument.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-11-28 19:41:11 +01:00
Stefan Roese
c5d02825ae ppc4xx/NAND: Reduce size of NAND SPL image
This is needed for the canyonlands_nand build target. Without it
the resulting image won't fit into 4k.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Stefan Roese <sr@denx.de>
2010-11-27 23:35:09 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Reinhard Meyer
e0987e251f sf: ramtron: new spi fram driver
Supports most types that support Read-Id and the FM25H20.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-10 04:26:18 -05:00
Wolfgang Denk
17dd883c5b Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-10-29 21:47:48 +02:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
C Nauman
d9abba8254 Add generic support for samsung s3c2440
This patch adds generic support for the Samsung s3c2440 processor.

Global s3c24x0 changes to struct members converting from upper case to
lower case.

Signed-off-by: Craig Nauman <cnauman@diagraph.com>
Cc: kevin.morfitt@fearnside-systems.co.uk
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-10-28 15:35:56 +09:00
Ilya Yanok
ec50a8e389 cfi_flash: handle 'chip size exceeds address window' situation
On some boards we have flash mapped high in the address space with
considerably small window (say 0xFE000000 and 32MB). When we install
bigger chip (say 64MB) on such a board strange things happen
(flash_write() doesn't work at all, for ex). That's because cfi_flash
driver doesn't care about window size at all.
Of course, cleanest solution would probably be to just extend address
window to be able to map the whole flash but for legacy/compatibility
reasons some people prefer just truncate the flash size and never use
the upper part.
This patch adds an option for cfi_flash driver to handle this situation
properly. To achieve this we add the new function cfi_flash_bank_size()
which can be provided by the board code and weak-aliased to default
implementation that returns value from the CONFIG_SYS_FLASH_BANKS_SIZES
array if it's defined or 0 otherwise (the last case is added for
compatibility).
If non-zero flash bank size is provided and detected chip size is bigger
than provided address window size the warning will be displayed and
flash chip will be truncated.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Changed cfi_flash_bank_size() return type to unsigned long
to match caller function.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-23 21:04:49 +02:00
Ben Gardiner
10d6ac94e0 davinci_nand, trivial : use symbolic ECC start command
The ECC calculations were started by writing 1 << 13 to the nand FCR register;
that value is also defined as DAVINCI_NANDFCR_4BIT_CALC_START in emif_defs.h.

This patch substitutes the macro DAVINCI_NANDFCR_4BIT_CALC_START for the
magic number '1 << 13'.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-10-17 20:14:43 +02:00
Reinhard Meyer
0d3fe2b153 sf: turn probe switch into a lookup table
This allows for arbitrarily long manufacturer ids following the JEDEC
standard of 0x7f continuation bytes.  It also makes adding new entries
easier as it's just one element in an array.  The downside is that it
increases code size a bit, but we're talking ~50 bytes.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-12 21:08:25 -04:00
Wolfgang Denk
c0c3590bb2 Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash 2010-10-12 20:49:27 +02:00
John Schmoller
0e3fa01a63 cfi_flash: Fix "Unknown FLASH" error message
When a CFI flash chip could not be detected an error message similar to
the following would be printed on bootup:

 FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 0 MB

The printf incorrectly converted the flash size into megabytes.  This
patch fixes the printing of the flash size in megabytes:

 FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 16 MB

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-12 08:59:15 +02:00
Enric Balletbo i Serra
456be17dbe mtd: OneNAND: add support for OneNAND manufactured by Numonyx
This patch adds the Numonyx manufacturer code (0x20) to
onenand manufacturers.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
2010-10-11 15:15:45 -05:00
Scott Wood
36650ca9f1 Followup fixes on the mtdparts spread patchset
Consolidate some code in mtd_get_len_incl_bad(), and fix a condition
where a valid partition could be reported as truncated if it has a
good block at the end of the device (unlikely, since the BBT is usually
there).

Fix mid-block declarations in net_part_size().

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-10-11 15:11:01 -05:00
Ben Gardiner
4ba692fb1e mtd: add an mtd method for get_len_incl_bad()
The logic to 'spread' mtd partitions needs to calculate the length in
the mtd device, including bad blocks.

This patch introduces a new function, mtd_get_len_incl_bad that can
return both the length including bad blocks and whether that length
was truncated on the device. This new function will be used by the
mtdparts spread command later in this series. The definition of the
function is #ifdef'd out in configurations that do not use the new
'mtdparts spread' command.

Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca>
CC: Scott Wood <scottwood@freescale.com>
2010-10-11 15:11:00 -05:00
Scott Wood
5b8e6bb517 nand: remove dead code and suspend/resume
Get rid of the several "#if 0" sections that were keeping around Linux
code that isn't relevant to U-Boot.  Besides cluttering the code, these
sections make tracking upstream changes harder, rather than easier.
It's easy to discard obviously irrelevant diff hunks that patch rejects,
but it's not as easy to notice hunks that apply cleanly to the #if 0
section, but *are* relevant to U-Boot and require modification elsewhere.

Also remove suspend/resume, as this is not applicable to U-Boot.  Removal
saves 232 bytes on powerpc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-10-11 15:10:35 -05:00
Scott Wood
3048632251 nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased.  This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.

Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.

While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition.  To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand.  This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.

While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-10-11 15:10:17 -05:00
Scott Wood
f9a5254111 nand util: read/write: accept unaligned length
The underlying code in nand_base.c already supports non-page-aligned reads
and writes, but the block-skipping wrapper code did not.

With block skipping, an unaligned start address is not useful since you
really want to be starting at the beginning of a partition -- or at least
that's where you want to start checking for blocks to skip, but we don't
(yet) support that.  So we still require the start address to be aligned.

An unaligned length, though, is useful for passing $filesize to the
read/write command, and handling it does not complicate block skipping.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-10-11 15:09:23 -05:00
David Jander
ff0dc2c433 sf: spansion: add support for S25FL032P parts
This patch introduces an extra mask-field in spansion_spi_flash_params
to support flash chips with 1-byte extended ID (like the S25FL032P).

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-06 20:50:38 -04:00
Marc-André Hébert
c3cb09207f sf: spansion: fixing erasing when sector size >64KiB
The spansion_erase currently only works when the sector size is 64KB.
cmd[1] should contain the higher 8 bit of the 24 bit address of the
sector to be erased. Currently it is holding the sector index to be
erased which happens to be the same thing when the sector size is
64KB.

Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-06 20:50:38 -04:00
Graeme Smecher
74f9e0d8a0 sf: winbond: add support W25Q64 parts
Adds support for Winbond's W25Q64 SPI flash. These devices are used on
(among others) Xilinx' SP601 and SP605 Spartan-6 evaluation boards.
Tested with "sf" commands.

Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-06 03:34:10 -04:00
Wolfgang Denk
2e6e1772c0 Merge branch 'next' of /home/wd/git/u-boot/next
Conflicts:
	include/ppc4xx.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-28 23:30:47 +02:00
Karl Beldan
86af10cac4 Fix "ubi part" cmd re-entrancy
Commit 2ee951ba (UBI: Enable re-initializing of the "ubi part" command)
reset mtd_devs in ubi_exit() but missed ubi_init()'s failure path.

Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-27 15:06:00 +02:00
Stefan Roese
b36df56115 ppc4xx: Move ppc4xx headers to powerpc include directory
This patch moves some ppc4xx related headers from the common include
directory (include/) to the powerpc specific one
(arch/powerpc/include/asm/). This way to common include directory is not
so cluttered with files.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:05 +02:00
Stefan Roese
3c29975e94 cfi_flash: Remove uneccessary #ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
Now that the defines are moved to header files we don't need this
conditional compilation any more. Remove it.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-20 15:09:00 +02:00
Stefan Roese
ca5def3f30 cfi_flash: Simplify dynamic flash bank number detection
This patch simplifies the use of CONFIG_SYS_MAX_FLASH_BANKS_DETECT. By
moving these optional variables and defines into the common code, board
specific code is minimized. Currently only the following board use
this feature:

APC405, IDS8247, TQM834x

And IDS8247 doesn't seem to really need this feature, since its not
updating the bank number variable at all. So this patch removes the
definition of CONFIG_SYS_MAX_FLASH_BANKS_DETECT from this board port.

This new framework will be used by the upcoming lwmon5 update as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
2010-09-20 15:08:51 +02:00
Stefan Roese
b00e19cc6b cfi_flash: Add weak default for cfi_flash_bank_addr()
cfi_flash_bank_addr(int bank_nr) returns the base addresses of the
requested bank. Introducing this weak default enables boards to override
this functions with a board specific version when required.

This feature will be used in the lwmon5 board update, supporting runtime
detection of 2 board revisions with different flash layouts.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-20 15:08:43 +02:00
Stefan Roese
cba34aafde cfi_flash: Simplify flash_get_info()
This patch removes an unecessary check in the return statement. This is
not needed, since "info" is initializes to NULL. And "info" will not be
written to again, if the flash address is not found.

Additionally "info" is not initialized to "0" but to "NULL".

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-20 15:08:33 +02:00
Wolfram Sang
1075b07e2c nand/davinci: make sure ECC calculation has really started
Due to a register glitch (result code <4 might show up right after the
start-calculation-bit was set), make sure the ECC has really started.

See 1c3275b656045aff9a75bb2c9f3251af1043ebb3 in the kernel.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-13 14:43:05 -05:00
Wolfgang Denk
a78ded1311 Merge branch 'master' of git://git.denx.de/u-boot-ti 2010-09-09 19:55:02 +02:00
Steve Sakoman
4c468397cf mtd: nand: supress 'unknown NAND' warning if no nand is found
This printk was added recently and results in ugly output on systems
with no NAND:

NAND:  nand_get_flash_type: unknown NAND device: Manufacturer ID: 0x00, Chip ID: 0x00 0 MiB

instead of:

NAND:  0 MiB

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08 14:51:29 -04:00
Wolfgang Denk
09b4a9cf40 Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-09-08 00:03:22 +02:00