Wolfgang Denk
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
Stefan Roese
62534beb2f
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
...
405 SDRAM: - The SDRAM parameters can now be defined in the board
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
Thanks to Andrea Marson from DAVE for this patch.
440 DDR: - Added function sdram_tr1_set to auto calculate the
TR1 value for the DDR.
- Added ECC support (see p3p440).
Patch by Stefan Roese, 17 Mar 2006
2006-03-31 14:32:07 +02:00
Rafal Jaworowski
b66a938342
Set SDelay register in the DDR controller for the MPC5200B chip.
2006-03-29 13:17:09 +02:00
Markus Klotzbuecher
2770bcb21c
Merge with http://www.denx.de/git/u-boot.git
2006-03-24 15:43:16 +01:00
Markus Klotzbuecher
40b0bafbb2
Added config options CFG_MONAHANS_RUN_MODE_OSC_RATIO and
...
CFG_MONAHANS_TURBO_RUN_MODE_RATIO for configuring the Monahans core
frequency.
2006-03-24 14:35:25 +01:00
Markus Klotzbuecher
ba70d6a417
delta board: DA9030 initialization and i2c support. Some minor changes to
...
make the pxa i2c driver work with the monahans cpu.
2006-03-24 12:23:27 +01:00
Wolfgang Denk
7b4fd36b03
Add support for MPC859/866 Rev. A.0
2006-03-18 23:31:12 +01:00
Rafal Jaworowski
dc9e499c62
Support for DDR with 32-data path. Addotional notes on injecting
...
multiple-bit errors.
2006-03-16 17:46:46 +01:00
Marian Balakowicz
4c8d1ecce2
Add support for ECC DDR initialization on MPC83xx.
2006-03-14 16:23:35 +01:00
Marian Balakowicz
61f25155ac
Add DMA support for MPC83xx.
2006-03-14 16:14:48 +01:00
Marian Balakowicz
6d8ae5abb5
Add sync in do_reset() routine for MPC83xx after RPR register
...
was written to. It is need on some targets when BAT translation
is enabled.
2006-03-14 16:12:48 +01:00
Marian Balakowicz
cd94ba397e
Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
2006-03-14 16:02:31 +01:00
Marian Balakowicz
a7c66ad2e5
Correct shift offsets in icache_status and dcache_status for MPC83xx.
2006-03-14 16:01:25 +01:00
Wolfgang Denk
ff7fefe679
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
...
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
2006-03-13 12:37:35 +01:00
Stefan Roese
f3fecfe6d7
Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
...
Patch by Stefan Roese, 13 Mar 2006
2006-03-13 09:43:01 +01:00
Stefan Roese
9a7b408c11
cpu/ppc4xx/start.S : exceptions are enabled after relocation
...
Patch by Cedric Vincent, 6 June 2005
2006-03-13 09:42:28 +01:00
Wolfgang Denk
9551530615
au1x00_eth.c: check malloc return value and abort if it failed
...
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13 01:00:22 +01:00
Wolfgang Denk
b38dbd4622
Fix bug in [id]cache_status commands for MPC85xx processors;
...
should look at LSB of L1CSRn registers to determine if L1 cache is
enabled, not the MSB.
Patch by Murray Jensen, 19 Jul 2005
2006-03-13 00:46:05 +01:00
Wolfgang Denk
795bee8496
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx
2006-03-12 21:33:52 +01:00
Wolfgang Denk
a3f0169880
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infr
2006-03-12 19:11:42 +01:00
Wolfgang Denk
23466d6a33
Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
...
Patch by KokHow Teh, 16 Jun 2005
2006-03-12 16:14:29 +01:00
Wolfgang Denk
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
Wolfgang Denk
6cb142fa3b
Add missing Blackfin files.
2006-03-12 02:12:27 +01:00
Wolfgang Denk
d2ed2f661b
More GCC 4.x woes
2006-03-11 23:07:09 +01:00
Wolfgang Denk
d52fb7e3d1
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
Wolfgang Denk
0be248fa9a
Cleanup (get rid of debug code that sneaked in)
2006-03-07 00:22:36 +01:00
Wolfgang Denk
951a954b77
Merge with /home/wd/git/u-boot/master
...
Code cleanup.
2006-03-06 23:18:48 +01:00
Markus Klotzbcher
43638c674a
Cleanup of NAND support of delta board using the Monahans Data Flash
...
Controller.
2006-03-06 15:04:25 +01:00
Markus Klotzbcher
bf7cac033b
Lots of new stuff:
...
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
Markus Klotzbcher
e8cd00835e
All subsystem clocks not immediately need are turned at reset.
2006-02-28 23:11:07 +01:00
Markus Klotzbcher
00c35bd214
Added GPIO initialization of DF signal. Still not working.
2006-02-28 22:51:01 +01:00
Wolfgang Denk
86ea5f93d7
Initial port to MCC200 board (work in progress)
...
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00
Kumar Gala
2688e2f972
Enable address translation on MPC83xx
...
Patch by Kumar Gala, 10 Feb 2006
2006-02-10 15:40:06 -06:00
Markus Klotzbcher
e0269579a5
This is the first commit for the u-boot zylonite port. The following has be
...
done so far:
* created zylonite board dir (based on lubbock)
* extended some - but not all pxa sources and headers for Intel
Monahans support (CONFIG_CPU_MONAHANS)
* created Makefile zylonite target + MAKEALL entry
* added some debug nonsense, remove later, grep for mk@tbd
Status: compiles (eldk-4.0), and can be started with BDI, but runs forever
and doesn't halt at breakpoints. Hmmm...
2006-02-07 20:04:48 +01:00
Zachary P. Landau
eacbd31775
Add support for Freescale M5271 processor
2006-01-26 17:35:56 -05:00
Kumar Gala
c99f384dce
Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
...
Patch by Kumar Gala, 25 Jan 2006
2006-01-25 16:12:46 -06:00
Stefan Roese
2076d0a15f
PMC405 and CPCI405: Moved configuration of pci resources into config file.
...
PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Kumar Gala
62ec6418d4
Add helper function for generic flat device tree fixups for mpc83xx
...
Patch by Kumar Gala 11 Jan 2006
2006-01-11 16:48:10 -06:00
Kumar Gala
ec00c33578
Only disable the MPC83xx watchdog if its enabled out of reset.
...
If its disabled out of reset SW can later enable it if so desired
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:23:01 -06:00
Kumar Gala
a15b44dbfa
Allow config of GPIO direction & data registers at boot on 83xx
...
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:21:14 -06:00
Kumar Gala
ce574ff506
Enable time handling on 83xx
...
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:19:12 -06:00
Kumar Gala
9260a56151
Make System IO Config Registers board configurable on MPC83xx
...
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:12:57 -06:00
Wolfgang Denk
a9e642e2f8
MPC5200: Set PCI retry counter to 0 = infinite retry;
...
The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005
2005-12-16 15:14:18 +01:00
Wolfgang Denk
7481266e4e
2005-12-12 16:06:05 +01:00
Wolfgang Denk
a889bd27ef
Fix DPRAM offset/size for MPC8541/8555.
...
Simplify TQM85xx Makefile handling.
2005-12-06 15:02:31 +01:00
Wolfgang Denk
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
2005-12-04 00:40:34 +01:00
Wolfgang Denk
c75eba3b41
Fix U-Boot compilation for MIPS boards using ELDK 4.0
2005-12-01 02:15:07 +01:00
Stefan Roese
a46726fdba
Compile warning fixed
...
Patch by Stefan Roese, 29 Nov 2005
2005-11-29 19:13:38 +01:00
Stefan Roese
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Stefan Roese
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
Stefan Roese
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Stefan Roese
fd49bf0214
Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
...
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:04:58 +01:00
Stefan Roese
527b5a511c
Fix MPC85xx PCI support (pci_register_hose() before pci config access)
...
Patch by Stefan Roese, 07 Nov 2005
2005-11-07 13:43:06 +01:00
Stefan Roese
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
Wolfgang Denk
5d4ee51061
Merge with /home/m8/git/u-boot
2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
Wolfgang Denk
7b5cac0e19
Merge with /home/wd/git/u-boot/master
2005-10-21 22:41:25 +02:00
Stefan Roese
1e25f957c8
Add NetConsole Support for AMCC eval boards
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:34:28 +02:00
Stefan Roese
a93316c5e9
Fix NetConsole support on 4xx (only print eth link on 1st transfer)
...
Patch by Stefan Roese, 18 Oct 2005
2005-10-18 19:17:12 +02:00
Rafal Jaworowski
6902df56a0
Add PCI support for the TQM834x board.
2005-10-17 02:39:53 +02:00
Wolfgang Denk
84bd92bdda
Merge with /home/m8/git/u-boot
2005-10-15 18:23:43 +02:00
Wolfgang Denk
77ddac9480
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
Wolfgang Denk
cbdf8824fa
Merge with /home/sr/git/u-boot
2005-10-13 01:55:58 +02:00
Wolfgang Denk
f57f70aab9
Support passing of OF flat trees to the kernel.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
Marian Balakowicz
e6f2e90233
Added support for TQM834x boards.
2005-10-11 19:09:42 +02:00
Stefan Roese
4f92ac3648
Fix problem in ppc4xx eth-driver without ethaddr (only without
...
CONFIG_NET_MULTI set)
Patch by Stefan Roese, 10 Oct 2005
2005-10-10 17:43:58 +02:00
Wolfgang Denk
3df5bea0b0
Add support for NetSilicon NS7520 processor.
...
Patch by Art Shipkowski, 12 May 2005
Cleanup.
2005-10-09 01:41:48 +02:00
Wolfgang Denk
7521af1c7d
Add support for AP1000 board.
...
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
Wolfgang Denk
95f9dda216
Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
...
Patch by Anders Larsen, 07 Oct 2005
The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
2005-10-09 00:33:37 +02:00
Wolfgang Denk
96782c63d3
Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
...
sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005
2005-10-09 00:22:48 +02:00
Wolfgang Denk
87cb6862b9
Update make target for ARM supported boards.
...
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
Wolfgang Denk
78da60773c
Complete support for the KwikByte KB920x boards
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:22:22 +02:00
Wolfgang Denk
c0e82d5016
Set the AT91RM9200 clock to asynchronous mode
...
Patch by Anders Larsen, 03 May 2005
2005-10-05 02:06:08 +02:00
Wolfgang Denk
3b9dfddfd8
Set the AT91RM9200 clock to synchronous mode
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:02:25 +02:00
Wolfgang Denk
645da51097
Add support for Cogent csb637
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
Wolfgang Denk
fef636b0cf
Fix dm9161.c initialization
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 01:54:04 +02:00
Wolfgang Denk
080bdb7f3a
* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
...
Patch by Anders Larsen, 29 Apr 2005
* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
(8e2be51de8
)
2005-10-05 01:51:29 +02:00
Wolfgang Denk
99b0d2851a
Added support for KwikByte KB920x boards (based on AT91RM9200)
...
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
2005-10-05 00:19:34 +02:00
Wolfgang Denk
7d314992a8
E500 update: repoint IVPR to RAM when code is relocated
...
Patch by Kylo Ginsberg, 13 Apr 2005
2005-10-05 00:00:54 +02:00
Wolfgang Denk
9b880bd4d8
Update ARM Integrator boards:
...
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
2005-10-04 23:10:28 +02:00
Wolfgang Denk
1820d4c73b
Make sure only supported compiler options are used
...
Import "cc-option" shell function from kernel and
use it to get the correct ARM GCC options for individual CPUs
Patch by Peter Pearse, 30 Jun 2005
2005-10-04 22:38:24 +02:00
Stefan Roese
9a8d82fd3c
Fix 440GR to print correct cpu revision
...
Patch by Stefan Roese, 4 Oct 2005
2005-10-04 15:00:30 +02:00
Wolfgang Denk
d8e7e0f044
Add support for AT91RM9200 OHCI Controller.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:26:56 +02:00
Wolfgang Denk
c570b2fdf5
Add board support for armadillo HT1070
...
Patch by Rowel Atienza, 06 Apr 2005
2005-09-26 01:06:33 +02:00
Wolfgang Denk
716c1dcb41
Cleanup
2005-09-25 18:49:35 +02:00
Wolfgang Denk
7a22cd535b
Fix au1x00_serial baud rate calculation:
...
remove hardcoded cpu clock divisor and use register instead;
round up instead of truncate
Patch by Andrew Dyer, 15 Feb 2005
2005-09-25 16:50:33 +02:00
Wolfgang Denk
1972dc0a9e
Added support for PCI bridge on MPC8272ADS
...
Patch by Vitaly Bordug, Feb 09 2005
2005-09-25 16:27:55 +02:00
Wolfgang Denk
fe7eb5d88b
Cleanup
2005-09-25 02:00:47 +02:00
Wolfgang Denk
74f4304ee7
Add ARM946E cpu and core module targets; remap memory to 0x00000000
...
Patch by Peter Pearse, 2 Feb 2005
2005-09-25 01:48:28 +02:00
Wolfgang Denk
9f221d0738
Fix MGT5100 PSC baudrate calculation
...
Patch by Sebastian Schau, 27 Jan 2005
2005-09-25 01:09:58 +02:00
Wolfgang Denk
265817c7e6
Add support for AMD's Pb1x00 eval board;
...
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
Wolfgang Denk
3706ba1a36
Fix warnings for PCI code on ixp
...
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
Wolfgang Denk
4bc12f1ccf
Fix ethernet timeouts on dbau1550 and other au1x00 systems
...
Patch by Leif Lindholm, 29 Dec 2004
2005-09-24 22:05:40 +02:00
Wolfgang Denk
0c8721a466
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
Wolfgang Denk
47278471f9
Merge with /home/sr/git/u-boot
2005-09-14 16:59:18 +02:00
Stefan Roese
4a3cd9e655
Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
...
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
2005-09-07 16:21:12 +02:00
Wolfgang Denk
c44ffb9efa
Update MPC5200 FIFO Control settings
...
(u-boot.habanero.fifo_cntrl.patch from Freescale)
2005-09-04 23:19:41 +02:00
Stefan Roese
a3e4fcb860
Fixed bamboo port to enable running without DDR-DIMM (bamboo has also 64MB onboard DDR)
...
Patch by Stefan Roese, 24 Aug 2005
2005-08-24 11:21:36 +02:00
Wolfgang Denk
ec2e5a2cce
Merge with testing-4xx_enet (Create generic 4xx Ethernet code)
2005-08-23 23:03:20 +02:00
Wolfgang Denk
2ac4785c2f
Fix make dependencies for at91rm9200 and ks8695 cpus
...
Patch by Steven Scholz, 23 Aug 2005
2005-08-23 22:29:44 +02:00