Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 13:56:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
66726 commits 24 branches 545 tags 332 MiB
Commit graph

10 commits

Author SHA1 Message Date
Vignesh Raghavendra
aeeca07a80 arm: dts: k3-j721e: Sync CPSW DT node from kernel 
Sync CPSW DT node from Kernel and move it out of -u-boot.dtsi file.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2020-07-13 20:58:34 +05:30
Vignesh Raghavendra
99faf0df04 arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT 
Sync DT bindings from kernel DT and move them to out of -u-boot.dtsi
files.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
 2020-07-13 20:58:34 +05:30
Keerthy
896cf0e20a arm: dts: k3-j721e: Enable ospi1/qspi 
Enable the ospi1/qspi for both r5 and a72 configurations.

Signed-off-by: Keerthy <j-keerthy@ti.com>
 2020-03-06 12:53:00 +05:30
Vignesh Raghavendra
224d7fe263 ARM: dts: k3-j721e: Add OSPI DT nodes 
Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support
OSPI boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
 2020-03-03 13:08:13 +05:30
Vignesh Raghavendra
b6427783a8 arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPL 
IO expanders are required to power cycle SD card. So enable the same

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
 2020-02-04 09:07:24 +05:30
Andreas Dannenberg
c44fb27af8 arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use 
Make the wkup_i2c0 module usable across all stages of U-Boot by adding
the needed definitions including the associated pinmux definitions.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
 2020-01-20 10:10:28 +05:30
Faiz Abbas
ccc855e9d9 arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card 
Add pinmux for sdhci1 node connected to the SD card.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
 2020-01-20 10:10:28 +05:30
Vignesh Raghavendra
5aeab3bf5e arm: dts: k3-j721e: Add DT nodes for USB 
J721e has two instances of Cadence USB3 controller. Add DT nodes for the
same. USB0 is configured to device mode and USB1 is configured to host
mode. For now only high speed mode is supported.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
 2020-01-20 10:10:28 +05:30
Vignesh Raghavendra
4886f1cb59 arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes 
Add DT nodes related to DMA and CPSW to -u-boot.dtsi to get networking
up on J721e EVM.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
 2019-12-09 09:47:43 -06:00
Lokesh Vutla
aebb2a499e arm: dts: k3-j721e: Add r5 specific dt support 
Add initial support for dt that runs on r5.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
 2019-07-26 21:49:29 -04:00