Commit graph

60 commits

Author SHA1 Message Date
Simon Glass
d422c77ae8 setexpr: Add some tests for buffer overflow and backref
Add tests to check for buffer overflow using simple replacement as well
as back references. At present these don't fully pass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
7526deec7e command: Add constants for cmd_get_data_size string / error
At present these values are open-coded in a few places. Add constants so
the meaning is clear.

Also add a comment to cmd_get_data_size()

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
288b29e44d common: Move command functions out of common.h
Move these functions into the command.h header file which is a better fit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:02 -05:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Bartosz Golaszewski
75846445ed cmd: define CMD_DATA_SIZE when CONFIG_CMD_SETEXPR is selected
The setexpr shell command calls cmd_get_data_size() which is only built
when CMD_DATA_SIZE is defined. We need to define CMD_DATA_SIZE if
CONFIG_CMD_SETEXPR is selected or the build will fail if no other
command selecting this option is enabled.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-06-14 16:10:50 -04:00
Heinrich Schuchardt
9eebaba2a8 cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10
CONFIG_SYS_HELP_CMD_WIDTH is used to format the output of help without any
arguments.

CONFIG_SYS_HELP_CMD_WIDTH = 8 is too narrow to fit all our commands.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-22 08:35:50 -04:00
AKASHI Takahiro
49d81fdfb8 cmd: env: add "-e" option for handling UEFI variables
"env [print|set] -e" allows for handling uefi variables without
knowing details about mapping to corresponding u-boot variables.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25 12:47:13 +01:00
Boris Brezillon
c0cf06e523 command: commands: Add macros to declare commands with subcmds
Most cmd/xxx.c source files expose several commands through a single
entry point. Some of them are doing the sub-command parsing manually in
their do_<cmd>() function, others are declaring a table of sub-commands
and then use find_cmd_tbl() to delegate the request to the sub command
handler.

In either case, the amount of code to do that is not negligible and
repetitive, not to mention that almost no commands are implementing
the auto-completion hook, which means most u-boot commands lack
auto-completion.

Provide several macros to easily define commands exposing sub-commands.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:54 -05:00
Boris Brezillon
80a48dd47e common: command: Rework the 'cmd is repeatable' logic
The repeatable property is currently attached to the main command and
sub-commands have no way to change the repeatable value (the
->repeatable field in sub-command entries is ignored).

Replace the ->repeatable field by an extended ->cmd() hook (called
->cmd_rep()) which takes a new int pointer to store the repeatable cap
of the command being executed.

With this trick, we can let sub-commands decide whether they are
repeatable or not.

We also patch mmc and dtimg who are testing the ->repeatable field
directly (they now use cmd_is_repeatable() instead), and fix the help
entry manually since it doesn't use the U_BOOT_CMD() macro.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:54 -05:00
Boris Brezillon
6fb61445bb common: command: Expose a generic helper to auto-complete sub commands
Some commands have a table of sub-commands. With minor adjustments,
complete_cmdv() is able to provide auto-completion for sub-commands
(it's just about passing the table of commands instead of taking the
global one).
We rename this function into complete_subcmd() and implement
complete_cmdv() as a wrapper around complete_subcmdv().

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15 15:28:53 -05:00
Heinrich Schuchardt
8a3d734b1b common: command: fix typo
%s/CMD_RET_SUCCESX/CMD_RET_SUCCESS/g

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-19 19:19:53 -04:00
Michal Simek
27eb7bce39 common: command: Handle USAGE failure separately
command_ret_t enum contains 3 return values but only two are handled
now. Extend cmd_process_error() and handle CMD_RET_USAGE separately.

These commands are affected by this change.
cmd/demo.c
cmd/efi.c
cmd/gpio.c
cmd/qfw.c
cmd/x86/fsp.c
test/dm/cmd_dm.c

And scripts shouldn't be affected because return value is not 0. But
every command implementation can choose what it is correct to pass.
I would expect that RET_USAGE is called when parameters are not
correctly passed (have incorrect value, missing parameters)
and RET_FAILURE when correct parameters are passed but command fails.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromum.org>
2018-07-19 10:49:53 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Nitin Jain
51916864b3 arm64: zynqmp: Add support to load an app at EL1
This patch is adding support to switch to EL1 while loading an EL1
application with u-boot running at EL above EL1 in aarch64 mode.

Signed-off-by: Nitin Jain <nitinj@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:34:42 +01:00
Simon Glass
6f62d7c4f7 Kconfig: Drop CONFIG_CMD_PORTIO and associated command
This command is not used by any board. It also looks quite similar to the
'iod' and 'iow' commands which use the correct I/O macros.

Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 15:41:52 -04:00
Simon Glass
f8bb696435 Drop command-processing code when CONFIG_CMDLINE is disabled
Command parsing and processing code is not needed when the command line is
disabled. Remove this code in that case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-01 17:17:40 -04:00
Simon Glass
fb24112c19 Allow command code to compile to nothing
When CONFIG_CMDLINE is disabled we need to remove all the command-line
code. Most can be removed by dropping the appropriate linker lists from the
images, but sub-commands must be dealt with specially.

A simple mechanism is used to avoid 'unused static function' errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:10 -04:00
Michael van Slingerland
4e42e29fd6 cmd_boot: Add a poweroff command
Add a 'poweroff' command to boot commands, this only gets enabled if the
board Kconfig does a "select CMD_POWEROFF".

Signed-off-by: Michael van Slingerland <michael@deviousops.nl>
[hdegoede@redhat.com: Make the cmd conditional on a CMD_POWEROFF Kconfig]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-13 21:05:25 -05:00
Tom Rini
cbb2df2018 CONFIG_NEEDS_MANUAL_RELOC: Fix warnings when not set
Now that we may compile (but not link) code calling fixup_cmdtable when
this is not set, we need to always have the declaration available.  We
should also make sure that anyone calling the function includes
<command.h> as that's where the function declaration is.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-07 08:35:23 -05:00
Stephen Warren
8b5c738b85 pxe: add AArch64 image support
The sysboot and pxe commands currently support either U-Boot formats or
raw zImages. Add support for the AArch64 Linux port's native image format
too.

As with zImage support, there is no auto-detection of the native image
format. Rather, if the image is auto-detected as a U-Boot format, U-Boot
will try to interpret it as such. Otherwise, U-Boot will fall back to a
raw/native image format, if one is enabled.

My belief is that CONFIG_CMD_BOOTZ won't ever be enabled for any AArch64
port, hence there's never a need to differentiate between CONFIG_CMD_
_BOOTI and _BOOTZ at run-time; compile-time will do. Even if this isn't
true, we want to prefer _BOOTI over _BOOTZ when defined, since _BOOTI is
definitely the native format for AArch64.

Change-Id: I83c5cc7566032afd72516de46f4e5eb7a780284a
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-27 15:53:48 -07:00
Simon Glass
87b6398b46 cli: hush: Adjust 'run' command to run each line of the env var
The run command treats each argument an an environment variable. It gets the
value of each variable and executes it as a command. If an environment
variable contains a newline and the hush cli is used, it is supposed to
execute each line one after the other.

Normally a newline signals to hush to exit - this is used in normal command
line entry - after a command is entered we want to return to allow the user
to enter the next one. But environment variables obviously need to execute
to completion.

Add a special case for the execution of environment variables which
continues when a newline is seen, and add a few tests to check this
behaviour.

Note: it's not impossible that this may cause regressions in other areas.
I can't think of a case but with any change of behaviour with limited test
coverage there is always a risk. From what I can tell this behaviour has
been around since at least U-Boot 2011.03, although this pre-dates sandbox
and I have not tested it on real hardware.

Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:03:33 -04:00
Simon Glass
aa69db1f7a Avoid including config.h in command.h
This is not necessary and prevents using this header when building tools.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:19:01 -04:00
Simon Glass
16ff990246 Add cmd_process_error() to report and process errors
U-Boot now uses errors defined in include/errno.h which are negative
integers. Commands which fail need to report the error and return 1
to indicate failure. Add this functionality in cmd_process_error().

For now this merely reports the error number. It would be possible
also to produce a helpful error message by storing the error strings
in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-04 12:15:28 -05:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Rob Herring
da620222f8 bootz: un-staticize do_bootz
Make do_bootz available for other functions like do_bootm is.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-06-24 19:07:33 -05:00
Albert ARIBAUD
ef123c5253 Refactor linker-generated arrays
Refactor linker-generated array code so that symbols
which were previously linker-generated are now compiler-
generated. This causes relocation records of type
R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
code which uses LGA able to run before relocation as
well as after.

Note: this affects more than ARM targets, as linker-
lists span possibly all target architectures, notably
PowerPC.

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
	board/ait/cam_enc_4xx/u-boot-spl.lds
	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
	board/davinci/da8xxevm/u-boot-spl-hawk.lds
	board/vpac270/u-boot-spl.lds

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-03-12 23:28:40 +01:00
Richard Genoud
34765e8853 cmd_time: merge run_command_and_time_it with cmd_process
As far as every arch has a get_timer function,
run_command_and_time_it code can now disappear.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-By: Che-Liang Chiou <clchiou@chromium.org>
[trini: s/ulong/unsigned long/ in command.h portion]
Signed-off-by: Tom Rini <trini@ti.com>
2013-02-04 09:14:02 -05:00
Vadim Bendebury
9ad557be2f Add console command to access io space registers
Provide u-boot console functions to access IO space registers. A no
thrills implementation, accessing one register at a time.

For example:
    boot > iod 80
    0080: 00000094
    boot > iod.w 80
    0080: 0094
    boot > iod.b 80
    0080: 94
    boot > iow.b 0x80 12
    boot > iod 0x80
    0080: 00000012

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-11 13:17:35 -07:00
Marek Vasut
8b493a5236 common: Discard the __u_boot_cmd section
The command declaration now uses the new LG-array method to generate
list of commands. Thus the __u_boot_cmd section is now superseded and
redundant and therefore can be removed. Also, remove externed symbols
associated with this section from include/command.h .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Marek Vasut
6c7c946cad common: Convert the U-Boot commands to LG-arrays
This patch converts the old method of creating a list of command
onto the new LG-arrays code. The old u_boot_cmd section is converted
to new u_boot_list_cmd subsection and LG-array macros used as needed.

Minor adjustments had to be made to the common code to work with the
LG-array macros, mostly the fixup_cmdtable() calls are now passed the
ll_entry_start and ll_entry_count instead of linker-generated symbols.

The command.c had to be adjusted as well so it would use the newly
introduced LG-array API instead of directly using linker-generated
symbols.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22 08:29:42 -07:00
Rob Herring
7405a13310 combine block device load commands into common function
All the raw block load commands duplicate the same code. Starting with
the ide version as it has progress updates convert ide, usb, and scsi boot
commands to all use a common version.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:43:19 -07:00
Simon Glass
9d12d5d41d Add cmd_process() to process commands in one place
We currently have the same code in hush.c and main.c. This brings the
code into one place.

As an added feature, if the command function returns CMD_RET_USAGE then
cmd_process() will print a usage message for the command before
returning the standard failure code of 1.

ARM code size increases about 32 bytes with this clean-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:41 +01:00
Simon Glass
bdf8e34b93 Create a single cmd_call() function to handle command execution
We should aim for a single point of entry to the commands, whichever
parser is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:34 +01:00
Igor Grinberg
d09b1787a4 env: clean cmd_nvedit.c checkpatch and code style
Cleanup the cmd_nvedit.c checkpatch warnings, errors and coding style.
There are 10 wanrings left about the simple_strtoul() function:
 WARNING: simple_strtoul is obsolete, use kstrtoul instead
 #359: FILE: cmd_nvedit.c:359:
 +		load_addr = simple_strtoul(argv[2], NULL, 16);

 ...

 total: 0 errors, 10 warnings, 1043 lines checked

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2011-11-22 08:39:25 +01:00
Simon Glass
8edf844f1b sandbox: Force command sections to be 4-byte aligned
By default sections are 16-byte aligned on some architectures, but the
command name structure (struct cmd_tbl_s) does not have padding to
16 bytes. This reduces the alignment to 4-bytes so that the command
table can be accessed correctly on any architecture.

(Note: this needs doing properly)

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17 23:56:58 +02:00
Mike Frysinger
e84ffddbce cmd_usage: constify
The usage helper doesn't modify the command, so constify its input arg.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:34:41 +02:00
Mike Frysinger
67d668bf92 autostart: unify duplicated logic into the bootm code
Rather than having a bunch of random commands handle autostart behavior,
unify the logic in a single place.  This also fixes building of these

different commands when bootm is disabled.

Acked-by: Matthew McClintock <msm@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-25 22:18:26 +02:00
Mike Frysinger
722b061b6f autocomplete: remove runtime handler install
Rather than add runtime overhead of installing completion handlers, do it
statically at build time.  This requires a new build time helper macro to
declare a command and the completion handler at the same time.  Then we
convert the env related funcs over to this.

This gives an opportunity to also unify the U_BOOT_CMD macros.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:49:27 +01:00
Mike Frysinger
882b7d726f do_reset: unify duplicate prototypes
The duplication of the do_reset prototype has gotten out of hand,
and they're not all in sync.  Unify them all in command.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:47:24 +01:00
Mike Frysinger
7842fb7c4f do_bootd: unify duplicate prototypes
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:46:47 +01:00
Mike Frysinger
36ebb78779 do_bootm: unify duplicate prototypes
The duplication of the do_bootm prototype has gotten out of hand,
and they're pretty much all outdated (wrt constness).  Unify them
all in command.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:45:32 +01:00
Mike Frysinger
40b484a3df command_t: punt unused type
The recent command clean up to constify the argv option to command funcs
missed the command_t type itself.  This is probably because there are no
build time warnings from it because no one is actually using this thing.
So just punt it rather than fix it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-28 21:42:56 +01:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Heiko Schocher
620f1f6a64 relocation: fixup cmdtable
fixup_cmdtable() did all work for fixing up the cmdtable,
if CONFIG_RELOC_FIXUP_WORKS is not defined.

CONFIG_RELOC_FIXUP_WORKS is missing for i386! I talked
with Graeme Russ, and he will fix this soon.

Portions of this work were supported by funding from
the CE Linux Forum.

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19 19:29:51 +02:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00
Wolfgang Denk
94796d8544 Make "usage" messages more helpful.
In case of incorrect command invocations U-Boot used to print pretty
useless "usage" messages, for example:

	=> nand markbad
	Usage:
	nand - NAND sub-system

In the result, the user would have to run the "help" command to get
the (available) information about correct command usage. Change this,
so that this information gets always printed.

Note that this changes the user interface of all commands, but
hopefully to the better.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:45:48 +02:00
Detlev Zundel
2dce551e10 command.c: Expose the core of do_help as _do_help to the rest of u-boot.
Other commands implementing subcommands can reuse this code nicely.

Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Andreas Pfefferle <ap@denx.de>
2009-03-27 21:06:30 +01:00
Peter Tyser
2fb2604d5c Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:49:52 +01:00
Peter Tyser
62c3ae7c6e Standardize command usage messages with cmd_usage()
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:43:45 +01:00