Commit graph

44 commits

Author SHA1 Message Date
Wolfgang Denk
c96f86eefc TFTP: allow for adjustable retransmission timout
So far, TFTP negotiated a fixed retransmission timeout of 5 seconds.
In some cases (busy networks, slow TFTP servers) this caused very
slow transfers. A new environment variable "tftptimeout" allows to
set this timeout. Lowering this value may make downloads succeed
faster in networks with high packet loss rates or with unreliable
TFTP servers.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-03-21 22:22:44 +01:00
Remy Bohmer
aafda38fb2 Add error codes/handling for TFTP-server
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-13 21:31:26 -08:00
Mike Frysinger
6ac59c5518 net: pull CONFIG checks out of source and into makefile
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-12-13 21:31:26 -08:00
Robin Getz
4fccb818e7 Add Transfer Size Option to tftp
Optionally add RFC 2349 "Transfer Size Option", so we can minimize the
time spent sending data over the UART (now print a single line during a
tftp transfer).

 - If turned on (CONFIG_TFTP_TSIZE), U-Boot asks for the size of the file.
 - if receives the file size, a single line (50 chars) are printed.
     one hash mark == 2% of the file downloaded.
 - if it doesn't receive the file size (the server doesn't support RFC
     2349, prints standard hash marks (one mark for each UDP frame).

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-08-25 13:35:54 -07:00
Alessandro Rubini
89ba81d107 tftp: get the tftp block size from config file and from the environment
Increasing the block size is useful if CONFIG_IP_DEFRAG is
used. Howerver, the last fragments in a burst may overflow the
receiving ethernet, so the default is left at 1468, with thre new
CONFIG_TFTP_BLOCKSIZE for config files. Further, "tftpblocksize"
can be set in the environment.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-08-25 13:35:54 -07:00
Wolfgang Denk
d371708a1b net/tftp.c: fix warning: pointer targets differ in signedness
tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen'
differ in signedness

This was only visible for the utx8245 board which seems to have DEBUG
enabled.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-08-10 09:59:10 +02:00
Robin Getz
0ebf04c607 minor debug cleanups in ./net
Minor ./net cleanups - no functional changes
  - change #ifdef DEBUG printf(); #endif to just debug()
  - changed __FUNCTION__ to __func__
  - got rid of extra whitespace between function and opening brace
  - removed unnecessary braces on if statements

 gcc dead code elimination should make this functionally/size equivalent
 when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).

 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-08-07 17:32:16 -07:00
Mike Frysinger
b6446b6775 convert print_IPaddr() to %pI4
Now that our printf functions support the %pI4 modifier like the kernel,
let's drop the inflexible print_IPaddr() function and covert over to the
%pI4 modifier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
2009-03-20 22:39:09 +01:00
Peter Tyser
6a86bb6c25 net: Fix TftpStart() ip:filename bug
The TftpStart() function modifies the 'BootFile'
string when 'BootFile' contains both an IP address
and filename (eg 1.2.3.4:/path/file). This causes
subsequent calls to TftpStart to incorrectly parse
the TFTP filename and server IP address to use.
For example:

=> tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
Speed: 100, half duplex
Using eTSEC1 device
TFTP from server 10.52.0.62; our IP address is 10.52.253.79
                 ^^^^^^^^^^ CORRECT
Filename '/home/ptyser/non_existant'.
          ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
Starting again

eTSEC2: No link.
Speed: 100, half duplex
Using eTSEC1 device
TFTP from server 10.52.0.33; our IP address is 10.52.253.79
                 ^^^^^^^^^^ WRONG
Filename '10.52.0.62'.
          ^^^^^^^^^^ WRONG
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
Starting again

TftpStart() was modified to not modify the 'BootFile' string.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-12-04 22:51:54 -08:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Bartlomiej Sieka
e83cc06375 net: Make TFTP server timeout configurable
There are two aspects of a TFTP transfer involving timeouts:
1. timeout waiting for initial server reply after sending RRQ
2. timeouts while transferring actual data from the server

Since the upcoming auto-update feature attempts a TFTP download during each
boot, it is undesirable to have a long delay when the TFTP server is not
available. Thus, this commit makes the server timeout (1.) configurable by two
global variables:

TftpRRQTimeoutMSecs
TftpRRQTimeoutCountMax

TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
server, TftpRRQTimeoutCountMax overrides default number of connection retries.
The total delay when trying to download a file from a non-existing TFTP server
is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.

Timeouts during file transfers (2.) are unaffected.

Signed-off-by: Rafal Czubak <rcz@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-10-18 21:54:00 +02:00
Bartlomiej Sieka
49f3bdbba8 net: express the first argument to NetSetTimeout() in milliseconds
Enforce millisecond semantics of the first argument to NetSetTimeout() --
the change is transparent for well-behaving boards (CFG_HZ == 1000 and
get_timer() countiing in milliseconds).

Rationale for this patch is to enable millisecond granularity for
network-related timeouts, which is needed for the upcoming automatic
software update feature.

Summary of changes:
- do not scale the first argument to NetSetTimeout() by CFG_HZ
- change timeout values used in the networking code to milliseconds

Signed-off-by: Rafal Czubak <rcz@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-10-18 21:54:00 +02:00
Jochen Friedrich
be1b0d2777 Don't tftp to unknown flash
If a board has a variable number of flash banks, there are empty entries
in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
"Outside available Flash". This patch skips flash banks with unknown
flash ids.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:19 -07:00
Andrew Klossner
dc4b0b38d4 Fix printf errors.
The compiler will help find mismatches between printf formats and
arguments if you let it.  This patch adds the necessary attributes to
declarations in include/common.h, then begins to correct the resulting
compiler warnings.  Some of these were bugs, e.g., "$d" instead of
"%d" and incorrect arguments.  Others were just annoying, like
int-long mismatches on a system where both are 32 bits.  It's worth
fixing the annoying errors to catch the real ones.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
2008-07-09 23:55:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD
38cc09c55b TFTP: fix search of ':' in BootFile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-14 23:02:52 +01:00
Jean-Christophe PLAGNIOL-VILLARD
a93907c43f TFTP: add host ip addr support
allow to use a different server as set in serverip
add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
if not defined the max length will be at 128

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-05 00:41:55 +01:00
Jean-Christophe PLAGNIOL-VILLARD
079c2c4fa7 Fix warning differ in signedness in net/net.c and net/nfs.c 2007-11-18 01:29:38 +01:00
Wolfgang Denk
60174746c6 Fix TFTP OACK code for short packets.
The old code had a loop limit overflow bug which caused a semi-
infinite loop for small packets, because in "i<len-8", "i" was signed,
but "len" was unsigned, and "len-8" became a huge number for small
values of "len".

This is a workaround which replaces broken commit 8f1bc284.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-31 10:01:51 +02:00
Wolfgang Denk
ff13ac8c7b Backout commit 8f1bc284 as it causes TFTP to fail.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-30 14:42:15 +02:00
Grant Likely
8f1bc28408 tftp: don't implicity trust the format of recevied packets
The TFTP OACK code trusts that the incoming packet is formated as
ASCII text and can be processed by string functions. It also has a
loop limit overflow bug where if the packet length is less than 8, it
ends up looping over *all* of memory to find the 'blksize' string.

This patch solves the problem by forcing the packet to be null
terminated and using strstr() to search for the sub string.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-08-30 09:16:16 +02:00
stefano babic
ef8f207527 Fix: TFTP is not working on little endian systems
TFTP does not work anymore after multicast tftp
patch was applied on little endian systems.
This patch fix it.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-08-29 02:14:34 +02:00
Jon Loeliger
30b52df9e9 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
Remove a leftover in net/tftp.c while we're at it.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-15 20:52:49 +02:00
Wolfgang Denk
85eb5caf6b Coding style cleanup; rebuild CHANGELOG 2007-08-14 09:47:27 +02:00
David Updegraff
53a5c424bf multicast tftp: RFC2090
Implemented IETF RFC2090, Multicast TFTP.  Initial implementation
on Realtek RTL8139 and Freescale TSEC.

Signed-off-by: David Updegraff <dave@cray.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-08-13 23:22:31 -04:00
Jon Loeliger
610f2e9c28 net/: Remove lingering references to CFG_CMD_* symbols.
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 11:05:02 -05:00
Jon Loeliger
643d1ab239 net/: Remove obsolete references to CONFIG_COMMANDS
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 17:45:14 -05:00
Jon Loeliger
6e2115acb6 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-04 00:23:14 +02:00
Wolfgang Denk
ddd5d9daf0 Fix typo.
Patch by Andreas Engel, 28 Nov 2005
2006-08-14 22:43:13 +02:00
Wolfgang Denk
84bd92bdda Merge with /home/m8/git/u-boot 2005-10-15 18:23:43 +02:00
Wolfgang Denk
77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Marian Balakowicz
e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk
28cb937584 Update for TFTP using a fixed UDP port
Use the approved environment variable names. Added "tftpdstp" to
allow ports other than 69 per Tolunay Orkun's recommendation.
Patch by Jerry Van Baren, 12 Jan 2005
2005-09-24 23:25:46 +02:00
Wolfgang Denk
ecb0ccd9c2 Allow to force TFTP to use a fixed UDP port
(Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpport)
Patch by Jerry Van Baren, 10 Jan 2005
2005-09-24 22:37:32 +02:00
Wolfgang Denk
7bc5ee0785 Prepare U-Boot for gcc-4.x 2005-08-26 01:36:03 +02:00
Wolfgang Denk
c43352ccfa Fix endianess problem in TFTP / NFS default filenames
Patch by Hiroshi Ito, 06 Dec 2004
2005-08-04 01:09:44 +02:00
wdenk
a3d991bd0d Patches by Pantelis Antoniou, 30 Mar 2004:
add networking support for VLANs (802.1q), and CDP (Cisco Discovery Protocol)
2004-04-15 21:48:45 +00:00
wdenk
4b9206ed51 * Patches by Thomas Viehweger, 16 Mar 2004:
- show PCI clock frequency on MPC8260 systems
  - add FCC_PSMR_RMII flag for HiP7 processors
  - in do_jffs2_fsload(), take load address from load_addr if not set
    explicit, update load_addr otherwise
  - replaced printf by putc/puts when no formatting is needed
    (smaller code size, faster execution)
2004-03-23 22:14:11 +00:00
wdenk
cd0a9de68b * Patch by Laurent Mohin, 10 Feb 2004:
Fix buffer overflow in common/usb.c

* Patch by Tolunay Orkun, 10 Feb 2004:
  Add support for Cogent CSB272 board

* Code cleanup
2004-02-23 20:48:38 +00:00
wdenk
3f85ce2785 * CVS add missing files
* Cleanup compiler warnings

* Fix problem with side effects in macros in include/usb.h

* Patch by David Benson, 13 Nov 2003:
  bug 841358 - fix TFTP download size limit

* Fixing bug 850768:
  improper flush_cache() in load_serial()

* Fixing bug 834943:
  MPC8540 - missing volatile declarations

* Patch by Stephen Williams, 09 Feb 2004:
  Add support for Xilinx SystemACE chip:
  - New files common/cmd_ace.c and include/systemace.h
  - Hook systemace support into cmd_fat and the partition manager

* Patch by Travis Sawyer, 09 Feb 2004:
  Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
2004-02-23 16:11:30 +00:00
wdenk
5bb226e821 * Use "-fPIC" instead of "-mrelocatable" to prevent problems with
recent tools

* Add checksum verification to 'imls' command

* Add bd_info fields needed for 4xx Linux I2C driver

* Patch by Martin Krause, 4 Nov. 2003:
  Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)

* Print used network interface when CONFIG_NET_MULTI is set
2003-11-17 21:14:37 +00:00
wdenk
fbe4b5cbde * Update TRAB auto update code
* Make fatload set filesize environment variable
  fix potential buffer overlow problem

* enable basic / medium / high-end configurations for PPChameleonEVB
  board; fix NAND code

* enable TFTP client code to specify to the server the desired
  timeout value (see RFC-2349)
2003-10-06 21:55:32 +00:00
wdenk
e0ac62d798 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
allow selection of clock frequency as "make" target

* Implement memory autosizing code for IceCube boards

* Configure network port on INCA-IP for autonegotiation

* Fix overflow problem in network timeout code

* Patch by Richard Woodruff, 8 Aug 2003:
  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
2003-08-17 18:55:18 +00:00
wdenk
73a8b27c57 * Add support for RMU board
* Add support for TQM862L at 100/50 MHz

* Patch by Pantelis Antoniou, 02 Jun 2003:
  major reconstruction of networking code;
  add "ping" support (outgoing only!)
2003-06-05 19:27:42 +00:00
wdenk
fe8c2806cd Initial revision 2002-11-03 00:38:21 +00:00