Commit graph

1821 commits

Author SHA1 Message Date
Marek Behún
61143f741e treewide: Fix Marek's name and change my e-mail address
Fix diacritics in some instances of my name and change my e-mail address
to kabel@kernel.org.

Add corresponding .mailmap entries.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Pali Rohár
56e3d6ef5d tlv_eeprom: Add missing CRC32 dependency
tlv_eeprom uses crc32() function, so add dependency into Kconfig.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 10:14:04 +02:00
Jan Kiszka
f3a56dda88 sf: Query write-protection status before operating the flash
Do not suggest successful operation if a flash area to be changed is
actually locked, thus will not execute the request. Rather report an
error and bail out. That's way more user-friendly than asking them to
manually check for this case.

Derived from original patch by Chao Zeng.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2022-07-18 19:15:19 +05:30
Heinrich Schuchardt
868353daa3 efi_loader: memory leak in efi_set_bootdev()
efi_dp_str() allocates memory which should be released after use.

Use %pD printf code. Adjust message wording.

Fixes: d837cb1e3b ("efi: Add debugging to efi_set_bootdev()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-07-13 20:07:07 +02:00
Tom Rini
36b661dc91 Merge branch 'next' 2022-07-11 14:58:57 -04:00
Tom Rini
9ff4ce8abc nman external-symbol improvements
Driver model memory-usage reporting
 patman test-reporting improvements
 Add bloblist design goals
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmK7BHwRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrealpwgAlCLCdEiSncV0t+Q9zvdtAQStvZdjD6CW
 VhpCS38pWUA0ckKYq/gmmlE2nW6i7pb4RdiOkpOhKdwFQI7SwbF2GdcU2yv08PMm
 qWHTRDaTm0SiGXUU462+A1Bj/aXPH86uEE9bCYu1FYtRrEtNf6aAeWF3pqNJv4fy
 CFB9OYyAfMEdywCtW2dCjS4y1FiI95Y2Jvg7lPGLVayHDyuavLSMKC8QEsVS4mR0
 91nNLhs6agko/H2i0QXle1lLjkvTIH3VR6dn/CMVjD+goJdDCk7rltHRXHejGun4
 n+a1W3EVv2sSQLwQJ0Kw5e2eBKdlM6Lpzhc0b0iJ2jKzBZeLXS+qBg==
 =2LZO
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-28jun22' of https://source.denx.de/u-boot/custodians/u-boot-dm into next

nman external-symbol improvements
Driver model memory-usage reporting
patman test-reporting improvements
Add bloblist design goals
2022-07-08 14:39:07 -04:00
Tom Rini
c45568cc4e Convert CONFIG_SYS_BOOTM_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
dd4bf24445 Convert CONFIG_USE_ONENAND_BOARD_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_USE_ONENAND_BOARD_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
bf904ea418 Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOAD
The "autoload" environment variable is always checked with env_get_yesno
as it can be set to any form of no.  The default behavior of
env_get_yesno is to return -1 on variables that are not set, which acts
as true in general (we test for non-zero return).  To convert
CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to
set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for
consistency sake.  Then, make it so that if enabled we set autoload=0 in
the default environment.  Migrate all platforms which set
CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their
default environment to using CONFIG_SYS_DISABLE_AUTOLOAD

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:49 -04:00
Nicolas Iooss
8f8c04bf1e i2c: fix stack buffer overflow vulnerability in i2c md command
When running "i2c md 0 0 80000100", the function do_i2c_md parses the
length into an unsigned int variable named length. The value is then
moved to a signed variable:

    int nbytes = length;
    #define DISP_LINE_LEN 16
    int linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
    ret = dm_i2c_read(dev, addr, linebuf, linebytes);

On systems where integers are 32 bits wide, 0x80000100 is a negative
value to "nbytes > DISP_LINE_LEN" is false and linebytes gets assigned
0x80000100 instead of 16.

The consequence is that the function which reads from the i2c device
(dm_i2c_read or i2c_read) is called with a 16-byte stack buffer to fill
but with a size parameter which is too large. In some cases, this could
trigger a crash. But with some i2c drivers, such as drivers/i2c/nx_i2c.c
(used with "nexell,s5pxx18-i2c" bus), the size is actually truncated to
a 16-bit integer. This is because function i2c_transfer expects an
unsigned short length. In such a case, an attacker who can control the
response of an i2c device can overwrite the return address of a function
and execute arbitrary code through Return-Oriented Programming.

Fix this issue by using unsigned integers types in do_i2c_md. While at
it, make also alen unsigned, as signed sizes can cause vulnerabilities
when people forgot to check that they can be negative.

Signed-off-by: Nicolas Iooss <nicolas.iooss+uboot@ledger.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-06-28 15:51:56 -04:00
Simon Glass
2cb4ddb91e dm: core: Add a command to show driver model statistics
This command shows the memory used by driver model along with various
hints as to what it might be if some 'core' tags were moved to use the
tag list instead of a core (i.e. always-there) pointer.

This may help with future work to reduce memory usage.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
dee2f5ae5c dm: core: Sort dm subcommands
Put these in alphabetic order, both in the help and in the implementation,
as there are quite a few subcommands now. Tweak the help for 'dm tree' to
better explain what it does.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Simon Glass
1452870404 dm: core: Rename dm_dump_all()
This is not a good name anymore as it does not dump everything. Rename it
to dm_dump_tree() to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28 03:09:52 +01:00
Tom Rini
c316ee674f Xilinx changes for v2022.10
cpu:
 - Add driver for microblaze cpu
 
 net:
 - Add support for DM_ETH_PHY to AXI emac and emaclite
 
 xilinx:
 - Switch platforms to DM_ETH_PHY
 - DT chagnes in ZynqMP and Zynq
 - Enable support for SquashFS
 
 zynqmp:
 - Add support for KR260 boards
 - Move BSS from address 0
 - Move platform identification from board code to soc driver
 - Improve zynqmp_psu_init_minimize
 
 versal:
 - Enable loading app at EL1
 
 serial:
 - Setup default address and clock rates for DEBUG uarts
 
 pinctrl:
 - Add support for tri state and output enable properties
 
 relocate-rela:
 - Clean relocate-rela implementation for ARM64
 - Add support for Microblaze
 
 microblaze:
 - Add support for runtime relocation
 - Rework cache handling (wiring, Kconfig) based on cpuinfo
 - Remove interrupt support
 
 timer:
 - Extract axi timer driver from Microblaze to generic location
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYrlYngAKCRDKSWXLKUoM
 ITgbAJ9S9xO2QqxtuodWAYMtJfvZ14c7mgCeKnyFTrrBnJkC0wPsGqE71oNJ49o=
 =3gGm
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2022.10

cpu:
- Add driver for microblaze cpu

net:
- Add support for DM_ETH_PHY to AXI emac and emaclite

xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS

zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize

versal:
- Enable loading app at EL1

serial:
- Setup default address and clock rates for DEBUG uarts

pinctrl:
- Add support for tri state and output enable properties

relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze

microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support

timer:
- Extract axi timer driver from Microblaze to generic location
2022-06-27 10:15:50 -04:00
Ovidiu Panait
15c924a743 cmd: cpu: migrate cpu command to U_BOOT_CMD_WITH_SUBCMDS()
Migrate cpu command to use U_BOOT_CMD_WITH_SUBCMDS() helper macro, to
reduce duplicated code. This also fixes the cpu command on boards that
enable CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-1-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Tom Rini
c4645fc87e cmd/misc: Stop using a function pointer
Currently, enabling CMD_MISC gives:
cmd/misc.c:67:25: warning: assignment to 'int (*)(struct udevice *, int,  void *, int)' from incompatible pointer type 'int (*)(struct udevice *, int,  const void *, int)' [-Wincompatible-pointer-types]

Because 'misc_read' takes a void * and 'misc_write' takes a const void
*, both of which make sense for their operation.  Given there's one
place we make use of the function pointer, just call read or write
directly for the operation we're called with.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-22 21:29:47 -04:00
Rui Miguel Silva
bfef72e4dd cmd: load: add load command for memory mapped
cp.b is used a lot as a way to load binaries to memory and execute
them, however we may need to integrate this with the efi subsystem to
set it up as a bootdev.

So, introduce a loadm command that will be consistent with the other
loadX commands and will call the efi API's.

ex: loadm $kernel_addr $kernel_addr_r $kernel_size

with this a kernel with CONFIG_EFI_STUB enabled will be loaded and
then subsequently booted with bootefi command.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-22 11:35:47 -04:00
Tom Rini
52af0101be Merge branch 'master' into next
Merge in v2022.07-rc5.
2022-06-20 14:40:59 -04:00
Heinrich Schuchardt
a872b18a0f cmd: correct return value for printenv -e
If printenv -e is executed and the specified variable is not found, the
return value $? of the command should be 1 (false).

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-06-19 15:53:09 +02:00
Pierre-Clément Tosi
24272ffd50 qfw: Don't fail if setup data size is 0
Skip missing setup data (which is valid) rather than failing with an
error.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reported-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
2022-06-06 18:01:21 -04:00
Pali Rohár
b257c4e906 ubifs: Add missing dependency on GZIP
GZIP option can be manually de-selected when UBIFS is enabled. This cause
following compile error because ubifs calls gzip functions.

  /tmp/ccxVrh2c.ltrans1.ltrans.o: in function `gzip_decompress.lto_priv.566':
  <artificial>:(.text+0x768): undefined reference to `zunzip'
  collect2: error: ld returned 1 exit status
  make: *** [Makefile:1813: u-boot] Error 1

So add missing dependency on GZIP.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-06 18:01:21 -04:00
Ovidiu Panait
7f0836a110 cmd: dm: migrate dm command to use U_BOOT_CMD_WITH_SUBCMDS()
Migrate dm command to use U_BOOT_CMD_WITH_SUBCMDS() helper macro, to reduce
duplicated code. We can also drop the CONFIG_NEEDS_MANUAL_RELOC exception,
as the command list is updated post relocation in board_r.c initcall
initr_manual_reloc_cmdtable().

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2022-06-06 17:47:16 -04:00
Tom Rini
d31466b382 Convert CONFIG_SYS_CBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
d0ee7f295d Convert CONFIG_SYS_PBSIZE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PBSIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:00 -04:00
Tom Rini
cf493582f8 Convert CONFIG_SYS_MAXARGS to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAXARGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:08:58 -04:00
Masahisa Kojima
e85727ddb6 bootmenu: use utf-8 for menu title
The commit a3d0aa87ac ("bootmenu: update bootmenu_entry structure")
changes the bootmenu title type from char to u16(UTF16 string)
to support EFI based system. If EFI_LOADER is not enabled,
printf("%ls") is not supported, so bootmenu does not appear
correctly.

This commit changes the type of menu title from u16(UTF16) to
utf-8 string and EFI strings is conveted into utf-8.

Fixes: a3d0aa87ac ("bootmenu: update bootmenu_entry structure")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Tested-by: Pali Rohar <pali@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-31 07:57:02 +02:00
Heinrich Schuchardt
8131c85a77 cmd/bootefi: correct command syntax
For indicating the address and size of a memory region other commands use a
<addr>[:<size>] syntax. Do the same for bootefi.

Fixes: 2058983689 ("cmd: bootefi: restore ability to boot arbitrary blob")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-28 10:59:27 +02:00
Masahisa Kojima
83f73632c9 bootmenu: U-Boot console is enabled as default
The commit 2158b0da22 ("bootmenu: add Kconfig option
not to enter U-Boot console") disables to enter U-Boot
console from bootmenu as default, this change affects the
existing bootmenu users.

This commit reverts the default behavior, the bootmenu can
enter U-Boot console same as before.
CMD_BOOTMENU_ENTER_UBOOT_CONSOLE is renamed
BOOTMENU_DISABLE_UBOOT_CONSOLE and depends on
AUTOBOOT_MENU_SHOW.

Fixes: 2158b0da22 ("bootmenu: add Kconfig option not to enter U-Boot console")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Tested-by: Pali Rohar <pali@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-28 10:59:27 +02:00
Heinrich Schuchardt
73872eb05a cmd/sbi: add implementation ID 6 - Coffer
The sbi command displays the ID of the implementation of the RISC-V
Supervisor Binary Interface Specification. A new ID for Coffer has recently
been added.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26 18:37:55 +08:00
Patrice Chotard
3feea0ba19 spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.

To sum-up:
 - Previous call tree was:
    spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

 - Current call tree is:
    spi_flash_probe() -> _spi_get_bus_and_cs()
    spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

This patch impacts the following :
  - cmd/sf.c: if spi mode and/or speed is passed in argument of
    do_spi_flash_probe(), call spi_flash_probe() otherwise call
    spi_flash_probe_bus_cs().

  - drivers/net/fm/fm.c: as by default spi speed and mode was set to
    0 and a comment indicates that speed and mode are read from DT,
    use spi_flash_probe_bus_cs().

  - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
    from DT by all platforms using this driver, so keep legacy and replace
    spi_flash_probe_bus_cs() by spi_flash_probe();

  - drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
    so replace spi_flash_probe_bus_cs() by spi_flash_probe().

  - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
    usage of this driver, nevertheless, keep legacy and replace
    spi_get_bus_and_cs() by _spi_get_bus_and_cs().

  - env/sf.c: a comment indicates that speed and mode are read
    from DT. So use spi_flash_probe_bus_cs().

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Patrice Chotard
61708bb0a2 spi: spi-uclass: Add new spi_get_bus_and_cs() implementation
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs().

Add new spi_get_bus_and_cs() implementation which rely on DT
for speed and mode and don't need any drv_name nor dev_name
parameters. This will prepare the ground for next patch.

Update all callers to use _spi_get_bus_and_cs() to keep the
same behavior.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Pali Rohár
008468fa35 cmd: mvebu: Hide bubt specific options when bubt is disabled
CONFIG_MVEBU_NAND_BOOT, CONFIG_MVEBU_SPI_BOOT, CONFIG_MVEBU_MMC_BOOT and
CONFIG_MVEBU_UBOOT_DFLT_NAME are unused when CONFIG_CMD_MVEBU_BUBT is not
enabled. So hide them.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-16 11:31:33 +02:00
Tom Rini
20cd58479f Pull request for efi-2022-07-rc3-2
UEFI:
 * Fix build errors due to
   - using sed with non-standard extension for regular expression
   - target architecture not recognized for CROSS_COMPILE=armv7a-*
   - CONFIG_EVENT not selected
 * add sha384/512 on certificate revocation
 
 Others:
 * factor out the user input handling in bootmenu command
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmJ3Z5kACgkQxIHbvCwF
 GsRXYA/+KxXQaYm++hkoc+WVyU7CnqQrb6pFkT60taGuqkTORwyPk+faWGZpeewf
 JuTJ5GssVjS1Vo+rU1zpPJxHLlGz9JGx3txiGadHHnsKVDeQdN6vB2Jb2uIp6xMN
 Z0LmFroTrNrUO6ymxqm0mi6rc/BV7iBNoR1TWxDOk+l68O3mpgJPnxnG0mxncThN
 qxas2pVxlt1B60ri3KRdpR9Li2KF36apVsw5J+Pqrrv4MiEAC8Fr/l5TRMiHJoSr
 /C1j704epoGqQMdpX+xLSykEhpZQ0RkVAUf3hcINPJxYYHRvQ4Qwk17yzqOlX8TV
 EOWob0v9Tr/wkFDFFBOdTl1ByVixENU/Sk/2F1olN+9nlMLlTrmaDTuNXh6Fv81q
 587fZ5bNI56PYmGWRS+p4YvQhKlZxVcpUiKVzopApPx+i0J101TlKs7OenLNKWnC
 LaWkcly1QH5yaJwTI8qZOnA8tLAfkzPjODQfpnCvsiB7w26ZFBjuaLDgtzkSmLAN
 07zHsrygesblmG3EfM7dJlIMNXYNWapZW+7BiTgH/f7KIqocjZt6qGY7sroHk1RY
 NJWwLCzv5TqoxL+HumDFmCRZbfBJbBeiEKs5x4EfrOeSHrXcuR4QJB0ScDlUtT5l
 eNp0Sn4lK5EhgXSeraiBkQVmca0rvCGEwbR4bV0832wZL2lqBqk=
 =Kdu1
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-07-rc3-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-07-rc3-2

UEFI:
* Fix build errors due to
  - using sed with non-standard extension for regular expression
  - target architecture not recognized for CROSS_COMPILE=armv7a-*
  - CONFIG_EVENT not selected
* add sha384/512 on certificate revocation

Others:
* factor out the user input handling in bootmenu command
2022-05-08 11:31:48 -04:00
Masahisa Kojima
3ae6cf5400 bootmenu: factor out the user input handling
This commit moves the user input handling from cmd/bootmenu.c
to common/menu.c to reuse it from other modules.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-07 23:17:26 +02:00
Philippe Reynes
26f404c766 cmd: gpt: add subcommand repair
Adds a sub-command repair to the command gpt
that allow to repair a corrupted gpt table. If
the both gpt table (primary and backup) are
valid, then the command does nothing.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-05-06 14:39:15 -04:00
Heinrich Schuchardt
2743470306 cmd: mmc: don't assign unused values
Don't assign a value to variable speedmode which is never used.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-05 15:06:02 -04:00
Heinrich Schuchardt
6d81319728 cmd: onenand: fix printf codes
For printing size_t use %zu or %zx.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-05 15:06:02 -04:00
Heinrich Schuchardt
54d24d7260 cmd: simplify do_adc_single()
If argc is not < 3, it must be >= 3.

If argc >= 3, argv[2] cannot be NULL.

Fixes: 9de612ae4d ("cmd: adc: Add support for storing ADC result in env variable")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-05 15:06:02 -04:00
Heinrich Schuchardt
e4269636be cmd: fix long text for fdt command
We don't have an option -cq but two distinct options -c and -q.

Fixes: e9496ec374 ("fdt: Add -q option to fdt addr for distro_bootcmd")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-05 15:06:02 -04:00
Masahisa Kojima
2158b0da22 bootmenu: add Kconfig option not to enter U-Boot console
This commit adds the Kconfig option to disable to enter
the U-Boot console from bootmenu.

If CMD_BOOTMENU_ENTER_UBOOT_CONSOLE is enabled, "U-Boot console"
entry is appeared as the last entry in the bootmenu, then user can
enter U-Boot console.

If CMD_BOOTMENU_ENTER_UBOOT_CONSOLE is disabled, "Quit" entry
is appeared as the last entry instead of "U-Boot console".
When user chooses "Quit" from bootmenu, the following default
commands are invoked.

 - "bootefi bootmgr" (if efi bootmgr is enabled)
 - "run bootcmd"

If the both commands are executed and returns to the bootmenu,
the bootmenu will appears again.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2022-05-03 21:39:22 +02:00
Masahisa Kojima
c606c0059f bootmenu: add UEFI boot entry into bootmenu
This commit adds the UEFI related menu entries
into the bootmenu.

User can select which UEFI "Boot####" option to execute
from bootmenu, then bootmenu sets the "BootNext" UEFI
variable and invoke efi bootmgr. The efi bootmgr
will handle the "BootNext" UEFI variable.

If the "BootNext" UEFI variable is preset and efi bootmgr is enabled,
bootmenu invokes efi bootmgr to handle "BootNext" as first priority.

The UEFI boot entry has the "UEFI BOOTXXXX" prefix as below.

  *** U-Boot Boot Menu ***

     UEFI BOOT0000 : debian
     UEFI BOOT0001 : ubuntu

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2022-05-03 21:39:22 +02:00
Masahisa Kojima
a3d0aa87ac bootmenu: update bootmenu_entry structure
This is a preparation for succeeding addition of uefi boot
and distro boot menu entries into bootmenu.
The bootmenu_entry title is updated to u16 string because
uefi use u16 string. This commit also factors out the function
to prepare the entries generated by "bootmenu_x" U-Boot environment
variable.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-03 21:39:22 +02:00
Heinrich Schuchardt
d1d7ed7b1e cmd: simplify bootmenu
* correct output for timeout > 99 s
* don't use spaces to advance to the output column

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-05-03 21:39:22 +02:00
Andrew Scull
3849ca7b2f acpi: Fix buffer overflow in do_acpi_dump()
When do_acpi_dump() converts the table name to upper case, pass the
actual size of the output buffer so that the null terminator doesn't get
written beyond the end of the buffer.

Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-29 11:11:36 -04:00
Tom Rini
8cfac237b9 Merge branch '2022-04-25-initial-implementation-of-stdboot'
To quote the author:
The bootflow feature provide a built-in way for U-Boot to automatically
boot an Operating System without custom scripting and other customisation.
This is called 'standard boot' since it provides a standard way for
U-Boot to boot a distro, without scripting.

It introduces the following concepts:

   - bootdev - a device which can hold a distro
   - bootmeth - a method to scan a bootdev to find bootflows (owned by
                U-Boot)
   - bootflow - a description of how to boot (owned by the distro)

This series provides an implementation of these, enabled to scan for
bootflows from MMC, USB and Ethernet. It supports the existing distro
boot as well as the EFI loader flow (bootefi/bootmgr). It works
similiarly to the existing script-based approach, but is native to
U-Boot.

With this we can boot on a Raspberry Pi 3 with just one command:

   bootflow scan -lb

which means to scan, listing (-l) each bootflow and trying to boot each
one (-b). The final patch shows this.

With a standard way to identify boot devices, booting become easier. It
also should be possible to support U-Boot scripts, for backwards
compatibility only.

...

The design is described in these two documents:

https://drive.google.com/file/d/1ggW0KJpUOR__vBkj3l61L2dav4ZkNC12/view?usp=sharing

https://drive.google.com/file/d/1kTrflO9vvGlKp-ZH_jlgb9TY3WYG6FF9/view?usp=sharing
2022-04-25 16:02:27 -04:00
Simon Glass
7fca71d0d6 bootstd: Add a bootmeth command
Add a 'bootmeth' command to handle listing and ordering of boot methods.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:04 -04:00
Simon Glass
2d653f686b bootstd: Add a bootflow command
Add a 'bootflow' command to handle listing and selection of bootflow.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:04 -04:00
Simon Glass
5d053cca38 bootstd: Add a bootdev command
Add a 'bootdev' command to handle listing and selection of bootdevs.

Disable standard boot for a few boards which otherwise run out of space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 10:00:04 -04:00
AKASHI Takahiro
64efbd125d cmd: part: add explicit dependency on PARTITIONS
This is a follow-up patch for my "disk: don't compile in partition
support for spl/tpl if not really necessary".

"part" command is useful only if, at least, one of partition table types
is selected. So it should have a dependency on PARTITIONS which is now
automatically selected if one of partition table types is enabled.

With this change, *_defconfig which explicitly selects CMD_PART but
has no partition table types enabled should also be fixed.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-04-24 15:17:31 -04:00
Tom Rini
46a06ed82a Pull request for efi-2022-07-rc1-3
Documentation:
 
 * Document image size parameter of bootefi command
 
 UEFI:
 
 * avoid building partition support in SPL/TPL where not required
 * improve integration of EFI subsystem and driver model
 * restore ability to boot arbitrary blob
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmJka8UACgkQxIHbvCwF
 GsQXVw/+OuG4lYgiBZUUOFtu7CZZTrEnMGszRhXmwEzTMNq2NBNRP1lRJFhyyU50
 ElS/I7wZwhFtEnsL5H4mf3Ww7BQLELecg/Q7bnDYhPNg4JWUWUSCGOVUkNRs5O1h
 3f6HBkdbvDVvITgopqEj1v4sNwSJCr8sFJQPe0o7i9FAb0+dbO/Er3Z6afp9vcsQ
 C6iiNq4zTaGm0YUZf1wOCJMngijvkJ+z+McAFCCAwH0zbT7GfNpmGNr8iviYPWJM
 tKzkvO73+LhGR6fgRl9XewbV0Mlkd2q54nfZrP+7tTycIrj0G/OUOyPnOUaJk485
 keouzcIVSzZGjeQtsZ9Rrw8EounuMJ/pRyGNsoWIyeY98gqJxtVYnrlNm/TvFs6F
 vALsqq0LsRkVmM/ut8eleV/U8Q6n6IYL4xtAH0tm4Jf4mrW1zt8IgWQnNOlHqg9J
 RjOAF0y38KUAoC7RzGjU+RJcWPoYuKGxEWEdGvIu3qP9blwaZ7UKRxqWilOgbypf
 pxbp9YsnT8pqY9cs6mzSZHPjJFSMVocaRzD521kgShS4cxOJHpZHU4wzd5hS4BFr
 BIMCSPPyuRmn3E2DDqncEtL4C7OoPV+LLXVyrF2neiWwjMd/4rGAoYnDwjRkD7dP
 uSFsNt9N3Mqpjwl/iMI5Kd+mOJ77TWnf9fKrEft4BIXexopzAms=
 =a5qc
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-07-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-07-rc1-3

Documentation:

* Document image size parameter of bootefi command

UEFI:

* avoid building partition support in SPL/TPL where not required
* improve integration of EFI subsystem and driver model
* restore ability to boot arbitrary blob
2022-04-23 18:42:00 -04:00