Commit graph

18559 commits

Author SHA1 Message Date
Vabhav Sharma
67b2ed0243 drivers: serial: probe all uart devices
U-Boot DM model probe only single device at a time
which is enabled and configured using device tree
or platform data method.

PL011 UART IP is SBSA compliant and firmware does the
serial port set-up, initialization and let the kernel use
UART port for sending and receiving characters.

Normally software talk to one serial port time but some
LayerScape platform require all the UART devices enabled
in Linux for various use case.

Adding support to probe all enabled serial devices like SBSA
compliant PL011 UART ports probe and initialization by firmware.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-01-16 14:49:09 -05:00
Vabhav Sharma
a59153dfeb dm: core: add function uclass_probe_all() to probe all devices
Support a common method to probe all devices associated with uclass.

This includes data structures and code for finding the first device and
looping for remaining devices associated with uclasses (groups of devices
with the same purpose, e.g. all SERIAL ports will be in the same uclass).

An example is SBSA compliant PL011 UART IP, where firmware does the serial
port initialization and prepare uart device to let the kernel use it for
sending and reveiving the characters.SERIAL uclass will use this function
to initialize PL011 UART ports.

The feature is enabled with CONFIG_DM.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-01-16 14:49:09 -05:00
Nishanth Menon
2d572ede11 power: regulator: Kconfig: add a dependency for POWER_SUPPORT for SPL
power/regulator will not be built if just CONFIG_SPL_DM_REGULATOR is
enabled. It needs CONFIG_SPL_POWER_SUPPORT to be enabled as well.

For example, if we just need a GPIO regulator in SPL:
CONFIG_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_DM_REGULATOR_GPIO=y

Will not suffice, since the entire regulator build for SPL depends on
CONFIG_SPL_POWER_SUPPORT. Elaborate that information in the Kconfig
dependency.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-01-16 14:49:09 -05:00
Marcin Juszkiewicz
9a3122f769 Kconfig: simple panel requires backlight
During build of simple panel driver backlight is needed so let's enable
it:

aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_set_backlight':
u-boot/drivers/video/simple_panel.c:43: undefined reference to `backlight_set_brightness'
aarch64-linux-gnu-ld.bfd: drivers/built-in.o: in function `simple_panel_enable_backlight':
u-boot/drivers/video/simple_panel.c:28: undefined reference to `backlight_enable'

Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2021-01-16 11:58:49 -05:00
Marek Szyprowski
92f1c89d0a disk: dos: rename write_mbr_partition to write_mbr_sector
write_mbr_partition() function name is a bit misleading, so rename it to
write_mbr_sector(). This is a preparation for adding code for writing a
complete MBR partition layout.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15 14:38:00 -05:00
Ovidiu Panait
c65abc70fb common: board_r: Drop initr_bbmii wrapper
Add a return value to bb_miiphy_init and use it directly in the
post-relocation init sequence, rather than using a wrapper stub.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15 14:36:12 -05:00
Ovidiu Panait
eb2825b79d common: board_r: Drop initr_xen wrapper
Add a return value to xen_init and use it directly in the
post-relocation init sequence, rather than using a wrapper stub.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15 14:36:12 -05:00
Ovidiu Panait
b9f6d0f7db common: board_r: Drop initr_pci wrapper
Add a return value to pci_init and use it directly in the post-relocation
init sequence, rather than using a wrapper stub.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15 14:36:12 -05:00
Ovidiu Panait
c343e8c0bf common: board_r: Drop initr_pci_ep wrapper
Add a return value to pci_ep_init and use it directly in the
post-relocation init sequence, rather than using a wrapper stub.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15 14:36:12 -05:00
Dario Binacchi
b0db69b4e1 dm: fix build errors generated by last merges
Something was wrong in the merge process into the mainline.
Some added patches access driver structure fields and functions that
have been modified by previous patches.
The patch renames:
 - dev_get_platdata to dev_get_plat
 - dev_get_uclass_platdata to dev_get_uclass_plat
 - ofdata_to_platdata to of_to_plat
 - plat_data_alloc_size to plat_auto
 - priv_auto_alloc_size to priv_auto
 - video_uc_platdata to video_uc_plat

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-15 13:12:38 -05:00
Chee Hong Ang
677b420a15 arm: socfpga: soc64: Add ATF support for FPGA reconfig driver
In non-secure mode (EL2), FPGA reconfiguration driver calls the
SMC/PSCI services provided by ATF to configure the FPGA.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2021-01-15 17:48:37 +08:00
Chee Hong Ang
a90ae0167b net: designware: socfpga: Add ATF support for MAC driver
In non-secure mode (EL2), MAC driver calls the SMC/PSCI services
provided by ATF to setup the PHY interface.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-01-15 17:48:37 +08:00
Chee Hong Ang
6b38cc2f2b mmc: dwmmc: socfpga: Add ATF support for MMC driver
In non-secure mode (EL2), MMC driver calls the SMC/PSCI services
provided by ATF to set SDMMC's DRVSEL and SMPLSEL.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-01-15 17:48:37 +08:00
Siew Chin Lim
d456dfbaa0 mmc: dwmmc: Change designware MMC 'clksel' callback function to return status
Change 'clksel' callback function to allow the code to return a
status.

This patch is a preparation for enabling Arm-Trusted-Firmware (ATF)
in Intel SoC FPGA. This patch does not change functionality.

When using Arm-Trusted-Firmware (ATF) in Intel SoC FPGA, the MMC clock
related register is secure register which is required to be written
via SMC/PCSI call. It is possible that U-Boot fail to write the
register if there is unexpected error between U-Boot and ATF.
As a result, there maybe signal integrity on MMC connection due to
clock. So, the code should reports error to user when 'clksel' fail.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-01-15 17:48:36 +08:00
Tom Rini
ab1a425524 - Enable logging features for stm32mp15 boards
- Update MAINTAINERS emails for STI and STM32
 - Activate OF_LIVE for ST stm32mp15 boards
 - Switch to MCO2 for PHY 50 MHz clock for DHCOM boards
 - Correction in stm32prog command on uart: always flush DFU on start command
 - Update USB-C power detection algorithm on DK boards
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl/+yLkACgkQ4rK92eCq
 k3X/Fgf/d/11WyQrVzvpr+nN+4Wl7J+ASmoUz0yKa6ri+lbvhLgh+JXbCRKgRPWu
 vNnI07pSoX/QeaMpGBU8Ztg/Onb9/pvffz4WMk1411GoyCpDFuuK3cVSIoqkPfu+
 XmgSX0u4BXtve1+ZdWfVBWXawUSEDMmGR3tmz1708c/s/oYpnVeRDcqiqzJ94cWE
 yt+SpMPVqMUVQ/rAGkE8ToSMxX7FusEa7SvCg4U2ikoRWs3kPpr/73+tRWlmgGxL
 sW8SXSKiOmFyheSBx3d2B9n00kDYTTrQmbW9hlMilZmji7CwZYxgTCMdX0x4DeFP
 RDajT2Yju1JmeM+Z8+Ke2tupzvy6QA==
 =oK8C
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210113' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Enable logging features for stm32mp15 boards
- Update MAINTAINERS emails for STI and STM32
- Activate OF_LIVE for ST stm32mp15 boards
- Switch to MCO2 for PHY 50 MHz clock for DHCOM boards
- Correction in stm32prog command on uart: always flush DFU on start command
- Update USB-C power detection algorithm on DK boards
2021-01-13 15:00:53 -05:00
Tom Rini
795f8fd0b5 - sync amlogic GX & AXG DT to Linux 5.10
- Add new MESON_EE driver support for GXBB & AXG
 - Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards
 - add driver for TDO tl070wsh30 panel driver
 - meson: isolate loading of socinfo
 - Add soc_rev to environment
 - Enable G12A support for saradc
 - Add correct mmcdev on VIM3(L) & Odroid-N2(C4)
 - Read MAC from fuses for VIM3 & VIM3L boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl/9rV0ACgkQd9zb2sjI
 SdFE0xAAtXzW98pKmC4C3a1FWcGSuBZK2gzUgKc8oTqBWodMTVLSmDGNbIpaES/+
 UySXSR0KJ5Qmu3jEZN2NYUKuABzylmIyT+5/sj1yN0zgxU2NB2//18uELNVKC4b+
 wtLna+SSebl8ofGuVzfYYCfbBS0S2Y+n9g2+WVu3s+D03WG5wrqEZy5RqKRf4OMZ
 MoQiDoLFms1GS6iLoidg/RMNme6efODAOTOVklHre2zeN3rjGei2URHdVtIeXcdG
 G3Wz9GVwR96UWTGY6JuXEGVpI459vHc4AcswnVcKNnILS/50tpSA9Gc0e0lXaDwT
 29DPehnoBkdbtIQ4szrAthGBITWhhgp2ksHaY5jyg38mVGF1/uu76kPUlCLxY5fL
 //3j/t+qaA3iwJq36tvZSKbprjA8sINN8Hsmi9+2Bzyv90sLfxY/x/DpeTVfWUQf
 UireG3iCYBkP5Mxr1kO+eJUoPAEe8BDJ+3AyVCjlMvKdomGFGCY0C/2LY54G8WS+
 el2Sj8XkTgtZQA/HXuXg1y2Cw54FWN6SXMVFXqZW5bu/w2GmeSOMEkFs3aFieCB7
 5UP+PiA3aM9Z6oXJReNnwc7iy+de8peZ/gpNCqWxr/jxg/C5d+Lg3kgbr961MyhU
 e97xab9p3f9raVOrYCAP7jVqAfTS39ZtAzSZlSJcK3Pls9wVxJI=
 =iIWq
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210112' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- sync amlogic GX & AXG DT to Linux 5.10
- Add new MESON_EE driver support for GXBB & AXG
- Add support for Libretech-CC v2, Wetek Core2, Beelink GT-King/Pro boards
- add driver for TDO tl070wsh30 panel driver
- meson: isolate loading of socinfo
- Add soc_rev to environment
- Enable G12A support for saradc
- Add correct mmcdev on VIM3(L) & Odroid-N2(C4)
- Read MAC from fuses for VIM3 & VIM3L boards
2021-01-13 07:32:02 -05:00
Patrick Delaunay
846365b907 video: stm32_dsi: migrate trace to dev and log macro
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
8d2257e5a7 video: stm32_ltdc: migrate trace to dev and log macro
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
a3ce8d600c serial: stm32: define LOG_CATEGORY
Define LOG_CATEGORY to allow filtering with log command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
b6e91f71d6 memory: stm32-fmc2: migrate trace to dev and log macro
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
6a7eefeb7e mtd: stm32_fmc2: migrate trace to dev and log macro
Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
162f5888e7 spi: stm32_qspi: migrate trace to dev and log macro
Change debug/pr_* to log_* or dev_* macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
7a41cb50ce spi: stm32_spi: migrate trace to dev and log macro
Change debug/pr_debug to log_debug or dev_dbg macro and
define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
0d5fbadeff phy: stm32-usbphyc: migrate trace to dev and log macro
Change pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
f4ed224d53 i2c: stm32f7_i2c: migrate trace to dev and log macro
Change debug to dev_dbg macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
ff2a09cede mailbox: stm32-ipcc: migrate trace to dev and log macro
Change debug to dev_dbg macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
829c92b1ee reset: stm32-reset: migrate trace to dev and log macro
Change debug to dev_dbg macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
cddc30d647 clk: clk_stm32h7: migrate trace to dev and log macro
Change debug and pr_ macro to dev macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
06a126313e clk: clk_stm32f: migrate trace to dev and log macro
Change debug and pr_ macro to dev macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
ceab8ee257 clk: stm32mp1: migrate trace to dev and log macro
Change debug and pr_ macro to dev macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
75760653cb misc: rcc: keep the rcc device name for subnode
Update the name associated with the RCC drivers to avoid
duplicated name with the driver name.

With this patch the traces displayed with log macro provide a
correct device name.

The rcc device name before the patch is:

 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 root          0  [ + ]   root_driver           root_driver
 simple_bus    0  [ + ]   simple_bus            |-- soc
 (...)
 nop           0  [ + ]   stm32-rcc             |   |-- rcc@50000000
 clk           0  [ + ]   stm32mp1_clk          |   |   |-- stm32mp1_clk
 reset         0  [ + ]   stm32_rcc_reset       |   |   `-- stm32_rcc_reset

And they become:
 (...)
 nop           0  [ + ]   stm32-rcc             |   |-- rcc@50000000
 clk           0  [ + ]   stm32mp1_clk          |   |   |-- rcc@50000000
 reset         0  [ + ]   stm32_rcc_reset       |   |   `-- rcc@50000000

The traces is correct:
stm32mp1_clk rcc@stm32mp1_clk: .....
=>
stm32mp1_clk rcc@50000000: .....

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
8e80ba5af0 misc: rcc: migrate trace to dev macro
Change debug and pr_err to dev macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
ca9a9da657 power: regulator: stm32-verfbuf: define LOG_CATEGORY
Define LOG_CATEGORY to allow filtering with log command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
281ebc5bf7 watchdog: stm32mp: migrate trace to dev macro
Change debug and pr_err to dev macro and define LOG_CATEGORY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
33d797ae03 rtc: stm32: migrate trace to log macro
Define LOG_CATEGORY to allow filtering with log command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
fb5b2463d2 hwspinlock: stm32: migrate trace to log macro
Define LOG_CATEGORY to allow filtering with log command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
1ac7d52d47 timer: stm32: migrate trace to log macro
Define LOG_CATEGORY to allow filtering with log command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
4dbaa1b6d7 mmc: stm32_sdmmc2: migrate trace to dev and log macro
Define LOG_CATEGORY, use dev_ macro when it is possible.
Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
66b3b9db69 ram: stm32mp1: migrate trace to dev or log macro
Define LOG_CATEGORY, use dev_ macro when it is possible
and migrate other trace to log_ macro.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
997f7dab9d ram: stm32: migrate trace to log macro
Define LOG_CATEGORY, change debug to dev_dbg and remove "%s:" __func__
header as it is managed by dev macro (dev->name is displayed)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
c886cd6eea remoproc: stm32: migrate trace to log macro
Define LOG_CATEGORY and remove unneeded pr_fmt macro with the dev
macro as dev->name is displayed and CONFIG_LOGF_FUNC can be
activated for log macro.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
6dd89d9d5a gpio: stm32-gpio: migrate trace to dev and log macro
Change debug to dev_dbg macro and define LOG_CATEGORY.

Remove dev->name as it is already displayed by dev macro.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Patrick Delaunay
28b3e7be15 pinctrl: stm32: migrate trace to log macro
Change debug to log macro and define LOG_CATEGORY.

Remove "%s:" with __func__ as it is managed by log macro
(CONFIG_LOGF_FUNC)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00
Nishanth Menon
ea3f534806 remoteproc: ti_k3_arm64: Program CNTFID0 register in GTC
ARMv8's generic timer[1] picks up it's graycode from GTC. However,
the frequency of the GTC is supposed to be programmed in CNTFID0[2]
register prior to enabling the GTC in CNTCR[3] register.

In K3 architecture, GTC provides a central time to many parts of the
SoC including graycode to the generic timer in the ARMv8 subsystem.
However, due to the central nature and the need to enable the counter
early in the boot process, the R5 based u-boot enables GTC and
programs it's frequency based on central needs of the system. This
may not be a constant 200MHz based on the system. The bootloader is
supposed to program the FID0 register with the correct frequency it
has sourced for GTC from the central system controller OR from PLLs
as appropriate, and TF-A is supposed[4] to use that as the frequency for
it's local timer.

Currently we are programming just the CNTCR[3] register to enable the
GTC, however we dont let TF-A know the frequency that GTC is actually
running at. A mismatch in programmed frequency and what we program for
generic timer will, as we can imagine, all kind of weird mayhem.

So, program the CNTFID0 register with the clock frequency. Note:
assigned-clock-rates should have set the clock frequency, so the only
operation we need to explicitly do is to retrieve the frequency and
program it in FID0 register.

Since the valid in K3 for GTC clock frequencies are < U32_MAX, we can
just cast the ulong and continue.

[1] https://developer.arm.com/documentation/100095/0002/generic-timer/generic-timer-register-summary/aarch64-generic-timer-register-summary
[2] https://developer.arm.com/docs/ddi0595/h/external-system-registers/cntfid0
[3] https://developer.arm.com/docs/ddi0595/h/external-system-registers/cntcr
[4] 6a22d9ea3c

Signed-off-by: Nishanth Menon <nm@ti.com>
2021-01-12 10:59:04 +05:30
Dario Binacchi
260cbc9af2 video: omap: move drivers to 'ti' directory
Add drivers/video/ti/ folder and move all TI's code in this folder for
better maintenance.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12 10:59:04 +05:30
Dario Binacchi
35ab1b6ef7 video: omap: split the legacy code from the DM code
The schedule for deprecating the features of the pre-driver-model puts
2019.17 as the deadline for the video subsystem. Furthermore, the latest
patches applied to the am335x-fb.c module have decreased the amount of
code shared with the pre-driver-model implementation. Splitting the two
implementations into two modules improves the readability of the code
and will make it easier to drop the pre-driver-model code.
I have not created a header file with the data structures and the
constants for accessing the LCD controller registers, but I preferred to
keep them inside the two c modules. This is a code replication until the
pre-driver-model version is dropped.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12 10:59:00 +05:30
Dario Binacchi
91337f59dd video: omap: set LCD clock rate through DM API
The patch configures the display DPLL using the functions provided by
the driver model API for the clock. The device tree contains everything
needed to get the DPLL clock. The round rate function developed for
calculating the DPLL multiplier and divisor and the platform routines
for accessing the DPLL registers are removed from the LCD driver code
because they are implemented inside the DPLL clock driver.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12 10:58:29 +05:30
Dario Binacchi
ff94c15a3c video: omap: add panel driver
The previous version of am335x-fb.c contained the functionalities of two
drivers that this patch has split. It was a video type driver that used
the same registration compatible string that now registers a panel type
driver. The proof of this is that two compatible strings were referred
to within the same driver.
There are now two drivers, each with its own compatible string,
functions and API.
Furthermore, the panel driver, in addition to decoding the display
timings, is now also able to manage the backlight.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-12 10:58:27 +05:30
Dario Binacchi
15daa4860b dm: core: add a function to decode display timings
The patch adds a function to get display timings from the device tree
node attached to the device.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-12 10:58:05 +05:30
Dario Binacchi
0f4effb05b bus: ti: am33xx: add pwm subsystem driver
The TI PWMSS driver is a simple bus driver for providing clock and power
management for the PWM peripherals on TI AM33xx SoCs, namely eCAP,
eHRPWM and eQEP.

For DT binding details see Linux doc:
- Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt

Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-01-12 10:58:05 +05:30