Commit graph

79126 commits

Author SHA1 Message Date
Adrian Fiergolski
532a5b297c misc: atsha204a: fix i2c address readout from DTS
This patch replaces use fdtdec_get_addr with simpler dev_read_addr().
fdtdec_get_addr doesn't work properly on ZynqMP-based (64bit) system. Although
not confirmed, it could be related to the fact, that quoting the documentation,
"This variant hard-codes the number of cells used to represent the address and
size based on sizeof(fdt_addr_t) and sizeof(fdt_size_t)".

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-03-23 07:27:37 +01:00
Adrian Fiergolski
e4662716fb misc: atsha204a: add delay after sending the message
Once request is sent, and before receiving a response, the delay is required.
This patch fixes missing delay for before first response try.

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-03-23 07:27:37 +01:00
Adrian Fiergolski
75967a24f9 misc: atsha204a: return timeout from wakeup function
If the maximum number of wake-up attempts is exceeded, return -ETIMEDOUT.

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2022-03-23 07:27:37 +01:00
Tom Rini
5f68470d69 Pull request for efi-2022-04-rc5
Documentation:
 
 * Fix documentation of FIP creation for Amlogic boards
 * Update Nokia RX-51 QEMU documentation
 * Add Raspberry Pi documentation
 
 UEFI:
 
 * Fix booting via short form device paths
 * Support short form device paths in 'efidebug boot add'
 * Fix ESP detection for capsule updates
 * Allow ACPI table usage even if device-tree exists - ignore DT
 * OP-TEE based GetVariable(): return attributes when buffer too small
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmI3UAIACgkQxIHbvCwF
 GsRopA/7BLiFUFayMnVL3qCLZKrceKSbz76zSs18zMab4U7FWEiWTLfqhV4PSgT+
 SfcpOCFsodRIGvNKwm/RpVSpwj7NPINUL29Hn70ojN0ckuJZNBj8ILflr7y6iuCX
 OI48rezhvnOMKk0F2JNFCQDzPYJVKm7Ej1M+CfVCuL+iQNEk4l9FI/pgnT8at5D/
 TcmUQIvqEj6wTv2XaT59AKm85R0r14NJHNRgNEEwgeReiZZ/cxK9I/jYTMFxWK0r
 uOEB1jrsRKnTMq3fgg9fOZRQvjavqoqe0evVtBfrkBpYP48AK9c9vXSBfCSUnygl
 lM+JS6keWaKeOH4605UHhxaFjAoW7VEH+a6jubbDoNNTUspRGpY6UViAc7O16DDK
 AjZN6uoUkeREFMokvHsgsh63cRj2WkKnildAIcnRyLhqQuHe+QS8ndiOSV4Q0peO
 ifT8BFF4loN2ttAViKNYeM6ydBabjmwJiuzuUG0tyxiYDXLS0/ErNp7aUwTgc/qP
 1E46PS+f6sZG2oiNk5L2MP689wEBgZpjSck4aH3ba+UrtGXSh/YC5ERaN1Zm7K5M
 GJ3UOL+G+o0Is4gYgp7tvizVfu+8FIC/ilOndmgtwdRoUYrUA2ePx7WPvArnHLc3
 rymR7IJ1yCD5RjVB3lA6eL76ORKNRBe3Gs7zGRK5jg55pw3MFSo=
 =Kn/h
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-04-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-04-rc5

Documentation:

* Fix documentation of FIP creation for Amlogic boards
* Update Nokia RX-51 QEMU documentation
* Add Raspberry Pi documentation

UEFI:

* Fix booting via short form device paths
* Support short form device paths in 'efidebug boot add'
* Fix ESP detection for capsule updates
* Allow ACPI table usage even if device-tree exists - ignore DT
* OP-TEE based GetVariable(): return attributes when buffer too small
2022-03-20 15:14:59 -04:00
Heinrich Schuchardt
9c045a49a9 efi_loader: move dtbdump.c, initrddump.c to lib/efi_loader
The tools dtbdump.efi and initrddump.efi are useful for Python testing even
if CONFIG_EFI_SELFTEST=n.

Don't clear the screen as it is incompatible with Python testing.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 17:01:00 +01:00
Heinrich Schuchardt
b78631d54f efi_loader: remove efi_disk_is_system_part()
The block IO protocol may be installed on any handle. We should make
no assumption about the structure the handle points to.

efi_disk_is_system_part() makes an illegal widening cast from a handle
to a struct efi_disk_obj. Remove the function.

Fixes: Fixes: 41fd506842 ("efi_loader: disk: add efi_disk_is_system_part()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
90dcd9b2d3 efi_loader: export efi_system_partition_guid
The efi_system_partition_guid is needed in multiple places. Export it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
63276a569d efi_loader: use short-form DP for load options
The GUID of partitions is sufficient for identification and will stay
constant in the lifetime of a boot option. The preceding path of the
device-path may change due to changes in the enumeration of devices.
Therefore it is preferable to use the short-form of device-paths in load
options. Adjust the 'efidebug boot add' command accordingly.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
9cdf470274 efi_loader: support booting via short-form device-path
The boot manager must support loading from boot options using a short-form
device-path, e.g. one where the first element is a hard drive media path.

See '3.1.2 Load Options Processing' in UEFI specification version 2.9.

Fixes: 0e074d1239 ("efi_loader: carve out efi_load_image_from_file()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
e46ef1db9e efi_loader: efi_dp_find_obj() add protocol check
Let function efi_dp_find_obj() additionally check if a given protocol is
installed on the handle relating to the device-path.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
c409593d08 efi_loader: fix efi_dp_find_obj()
efi_dp_find_obj() should not return any handle with a partially matching
device path but the handle with the maximum matching device path.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
8399488672 efi_loader: export efi_dp_shorten()
Rename function shorten_path() to efi_dp_shorten() and export it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Ilias Apalodimas
ff6af6eede efi_loader: Set variable attributes when EFI_BUFFER_TOO_SMALL is returned
Starting UEFI Spec 2.8 we must fill in the variable attributes when
GetVariable() returns EFI_BUFFER_TOO_SMALL and Attributes is non-NULL.

This code was written with 2.7 in mind so let's move the code around a
bit and fill in the attributes EFI_BUFFER_TOO_SMALL is returned

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Alexander Graf
0832dd2900 efi_loader: Ignore DT when ACPI is on
For targets that enable ACPI, we should not pass Device Trees into
the payload. However, our distro boot logic always passes the builtin
DT as an argument.

To make it easy to use ACPI with distro boot, let's just ignore the DT
argument to bootefi when ACPI is enabled. That way, we can successfully
distro boot payloads on ACPI enabled targets.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Matthias Brugger
bfffb9f84f doc: board: raspberrypi: Add documentation
Add documentation about the different configuration files for the
RaspberryPi board family.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Jan Kiszka
2899296e5c doc: uefi: Fix reference to CONFIG_EFI_SECURE_BOOT
There is no CONFIG_UEFI_SECURE_BOOT, and there was never any.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Pali Rohár
aac01df4f5 Nokia RX-51: Update documentation about QEMU
Add section how to run U-Boot in n900 qemu machine.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Neil Armstrong
4c60512ad9 doc: boards: amlogic: Add documentation on pre-generated FIP files
It add documentation on licencing & provides links to the amlogic-boot-fip
pre-built files collections.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-03-20 11:03:06 +01:00
Neil Armstrong
23f20ef77c doc: board: amlogic-p20x: fix FIP generation doc
The doc used GXL instructions, which couldn't work on GXBB SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-03-20 11:03:06 +01:00
Johannes Krottmayer
17b8cb6353 tools: buildman: Fix doc path in warning message
Fix documentation path in deprecated warning message about device
driver.

Signed-off-by: Johannes Krottmayer <krjdev@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:05 +01:00
Johannes Krottmayer
1840ce5f38 Makefile: Fix doc path in warning message
Fix documentation path in warning message about deprecated device driver.

Signed-off-by: Johannes Krottmayer <krjdev@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:05 +01:00
Tom Rini
a958c58571 binman FIT improvements
various minor sandbox improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmI1URkRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYglAf/eM5MtohjWDBQUyvPiQTIV0iS5Zu7NV7Z
 1qkrv4OuwZ+U3djtusP7VIUnmdnQlwbF1fFZzo+JUmtYg59K6ZvgI/S+oJzr17/D
 bMh+8FpDggEjJhzwSM5fdImfE1PLp161zUxTWMH25VmB+yxQMGWqZBQls+0GADN5
 jT4dGwTn098a2HLvdAqkNwafY0Q1cUQeYg8z2J3gdDdZos2PdQV3TqjbrAS6Pr+Z
 jAZV+TfTkU2rk6S7B34Ojzx2dF8e80sRK/o/2/+60kt+dUO+nfS/evOb1kqfj8dx
 ULNXEBjS1aMy7Z6TCg/E3uEZLM5xyaTZKTwiNeKMthmOK8ZQ3boRuA==
 =9FkF
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-18mar22' of https://source.denx.de/u-boot/custodians/u-boot-dm into next

binman FIT improvements
various minor sandbox improvements
2022-03-19 09:09:58 -04:00
Simon Glass
40c8bdd87e binman: Support splitting an ELF file into multiple nodes
Some boards need to load an ELF file using the 'loadables' property, but
the file has segments at different memory addresses. This means that it
cannot be supplied as a flat binary.

Allow generating a separate node in the FIT for each segment in the ELF,
with a different load address for each.

Also add checks that the fit,xxx directives are valid.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
2337eca283 binman: Keep a separate list of entries for fit
The current implementation sets up the FIT entries but then deletes the
'generator' ones so they don't appear in the final image.

This is a bit clumsy. We cannot build the image more than once, since the
generator entries are lost during the first build. Binman requires that
calling BuildSectionData() multiple times returns a valid result each
time.

Keep a separate, private list which includes the generator nodes and use
that where needed, to correct this problem. Ensure that the missing list
includes removed generator entries too.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
01f467e2d3 binman: Update fit to use node instead of subnode
It doesn't make sense to use 'subnode' as a function parameter since it
is just a 'node' so far as the function is concerned. Update two functions
to use 'node' instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
ce4e402a32 binman: Add a consistent way to report errors with fit
Add a new function to handling reporting errors within a particular
subnode of the FIT description. This can be used to make the format of
these errors consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
5795497e8b binman: Fix some pylint warnings in fit
Some warnings have crept in, so fix those that are easy to fix.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
d32169c0fd binman: Update fit to move node reading into the ReadNode() method
This should not be done in the constructor. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
b55c11c96e binman: Read the fit entries only once
At present the entries are read twice, once by the entry_Section class
and once by the FIT implementation. This is harmless but can be confusing
when debugging. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
72e423c6b6 binman: Allow mkimage to use a non-zero fake-blob size
Unfortunately mkimage gets upset with zero-sized files. Update the
ObtainContents() method to support specifying the size, if a fake blob is
created.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
3817ad4c1c binman: Make fake blobs zero-sized by default
On x86 devices having even a small amount of data can cause an overlap
between regions. For example, bayleybay complains when the intel-vga
region overlaps with u-boot-ucode:

   ImagePos    Offset      Size  Name
   <none>    00000000  00800000  main-section
   <none>     ff800000  00000080  intel-descriptor
   <none>     ff800400  00000080  intel-me
   <none>     fff00000  00098f24  u-boot-with-ucode-ptr
   <none>     fff98f24  00001aa0  u-boot-dtb-with-ucode
   <none>     fff9a9d0  0002a000  u-boot-ucode
   <none>     fffb0000  00000080  intel-vga
   ...

It is safer to use an empty file in most cases. Add an option to set the
size for those uses that need it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
9a0a2e9569 binman: Change how faked blobs are created
At present fake blobs are created but internally an empty blob is used.
Change it to use the contents of the faked file. Also return whether the
blob was faked, in case the caller needs to know that.

Add a TODO to put fake blobs in their own directory.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
ae9a457029 binman: Rename tools parameter to btools
This shadows the patman.tools library so rename it to avoid a pylint
warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
38397d0833 binman: Refactor fit to generate output at the end
At present the fit implementation creates the output tree while
scanning the FIT description. Then it updates the tree later when the
data is known.

This works, but is a bit confusing, since it requires mixing the scanning
code with the generation code, with a fix-up step at the end.

It is actually possible to do this in two phases, one to scan everything
and the other to generate the FIT. Thus the FIT is generated in one pass,
when everything is known.

Update the code accordingly. The only functional change is that the 'data'
property for each node are now last instead of first, which is really a
more natural position. Update the affected test to deal with this.

One wrinkle is that the calculated properties (image-pos, size and offset)
are now added before the FIT is generated. so we must filter these out
when copying properties from the binman description to the FIT.

Most of the change here is splitting out some of the code from the
ReadEntries() implementation into _BuildInput(). So despite the large
diff, most of the code is the same. It is not feasible to split this patch
up, so far as I can tell.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
c9ee33ac97 binman: Rename ExpandEntries to gen_entries
Leave the 'expand' term for use by entry types which have an expanded
version of themselves. Rename this method to indicate that it generates
subentries.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
80a66ae646 binman: Rename ExpandToLimit to extend_to_limit
The word 'expand' is used for entries which generate subentries. It is
also used for entries that can have an '_expanded' version which is used
to break out its contents.

Rather than talking about expanding an entry's size, use the term
'extending'. It is slightly more precise and avoids the above conflicts.

This change renders the old 'expand-size' property invalid, so add an
error check for that.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
6d427c4bcb binman: Tweak collect_contents_to_file() and docs
Update the return value of this function, fix the 'create' typo and
update the documentation for clarity.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
17b4ffc56f elf: Rename load_segments() and module failure
Rename this function to make it clear that it only reads loadable
segments. Also update the error for missing module to better match the
message emitted by Python.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
0ded4d434d dtoc: Tidy up implementation of AddStringList()
Refactor this to avoid a loop. Also add a test for an empty string.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
b13114cd21 spl: Correct Kconfig help for TPL_BINMAN_SYMBOLS
Fix the help which should refer to TPL, not SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:25 -06:00
Simon Glass
d9c958f49c moveconfig: Use re.fullmatch() to avoid extra check
Simplify the code by using the available function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:24 -06:00
Simon Glass
78f12e5369 moveconfig: Remove remove_defconfig()
This is not necessary if simpler code is used. Use the split function and
drop the unnecessary []

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:24 -06:00
Simon Glass
6101253818 dtoc: Make GetArgs() more flexible
At present it is not possible to have arguments which include spaces.
Update the function to only split the args if the property is a single
string. This is a bit inconsistent, but might still be useful.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-03-18 19:24:24 -06:00
Simon Glass
04fce6ff70 patman: Define Commit.path in the constructor
It is good practice to init all variables in the constructor and pylint
sometimes checks this. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
2022-03-18 19:24:24 -06:00
Simon Glass
79e1d289b7 sandbox: test: Tidy up spl_test_load() calls
Use the new sandbox_find_next_phase() function, which does what is needed
here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-18 19:24:24 -06:00
Simon Glass
7c19e4cbfe sandbox: Slow down the LCD sync rate
There is seldom a need to refresh at 100Hz and it uses a lot of CPU.
Reduce the rate to 10Hz which seems to be adequate.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-18 19:24:24 -06:00
Simon Glass
7aa9dbd0ab sandbox: Open host file for read-only access if needed
Some files cannot be written but read-only access is still useful for
tests. Add a fallback to read-only access when needed.

This is useful in CI when opening a large data file provided by docker,
where read/write access would result in copying the file, thus needing
a lot of extra disk space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-18 19:24:24 -06:00
Simon Glass
acc874a4c5 sandbox: Add the handoff header for spl
This defines a function declared in handoff.h so add the header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-18 19:24:24 -06:00
Simon Glass
d02f99dd67 sandbox: Show a message when writing out the ram buffer
If state is not being written, but RAM is, we should still show a message,
so it is clear that this is happening.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-18 19:24:24 -06:00
Jan Kiszka
b210661c86 binman: Include also subnodes in generator nodes
This allows to prefill fdt and config nodes with hash and signature
subnodes. It's just important to place the child nodes last so that
hashes do not come before the data - would be disliked by mkimage.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-18 19:24:24 -06:00