Commit graph

67239 commits

Author SHA1 Message Date
Michael Walle
86c31dad32 armv8: layerscape: make wake_secondary_core_n() static
This function is not used outside the module. Make it static.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Michael Walle
dcfbbed570 armv8: layerscape: simplify get_spin_tbl_addr() calls
There is no need to cast around. Assign the address to the local
variable and use it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
c31ac97f96 armv8: layerscape: remove determine_mp_bootpg()
Only the PowerPC architecture needs this function. Remove it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
b1c41231c4 armv8: layerscape: fix alignment for spin table
Fix the alignment so it will match the comments. The spin table has to
be 8 byte aligned, so ".align 3" is enough.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
2eca7b9704 armv8: layerscape: load function pointer using ADR
Don't use LDR to load a pointer to a function. This will generate a
literal which cannot be relocated. Use ADR which is PC-relative and
therefore can easily be relocated.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
f6c62f1c9e armv8: layerscape: move spin table into own module
Move it out of lowlevel.S into spintable.S. On layerscape, the secondary
CPUs are brought up in main u-boot. This will make it possible to only
compile the spin table code for the main u-boot and omit it in SPL.

This saves about 720 bytes in the SPL.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
3d3fe8b12d armv8: layerscape: properly use CPU_RELEASE_ADDR
The generic armv8 code already has support to bring up the secondary
cores. Thus, don't hardcode the jump in the layerscape lowlevel_init to
the spin table code; instead just return early and let the common armv8
code handle the jump. This way we can actually use the CPU_RELEASE_ADDR
feature.

Signed-off-by: Michael Walle <michael@walle.cc>
[Rebased, Removed kontron_sl28.h change as file does not exist]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
ae846a6119 armv8: layerscape: pretty print info about SMP cores
Make the print of the starting address a debug output and pretty print
the info about online cores.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Michael Walle
b27f48540e armv8: layerscape: fix spin-table support
Spin tables are broken with bootefi. This is because - in contrast to
the booti call chain - there is no call to smp_kick_all_cpus(). Due to
this missing call the secondary CPUs are never released from their "wait
for interrupt state", see secondary_boot_func() in lowlevel.S.

Originally, this "wait for interrupt" is there to make sure, the spin
table is cleared before the secondary cores read it for the first time.
But the boot flow for the layerscape architecture is different from
that. The CPUs are release from their BootROM _after_ U-Boot's
spin-table is cleared, see fsl_layerscape_wake_seconday_cores() in mp.c.
Thus, there is no need to wait for this interrupt and no need for
kicking all cores on cpu_release. An atomic 64bit write to the
spin-table and a "sev" is sufficient.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
Kuldeep Singh
e0152dbed6 net: pfe_eth: Use spi_flash_read API to access flash memory
Current PFE firmware access spi-nor memory directly. New spi-mem
framework does not support direct memory access. So, let's use
spi_flash_read API to access memory instead of directly using it.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
hui.song
02decd4e0c dm: armv8: gpio: include <asm/arch/gpio.h> for fsl-layerscape
Enable the gpio feature on fsl-layerscape platform.

Signed-off-by: hui.song <hui.song_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:27 +05:30
hui.song
08333fa50b armv8: gpio: add gpio feature
add one struct mpc8xxx_gpio_plat to enable gpio feature.

Signed-off-by: hui.song <hui.song_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:26 +05:30
Era Tiwari
e08bcc0e94 configs: ls1088ardb: Add support for usb boot target
LS1088A-RDB has MMC, SCSI, DHCP as boot targets,
but the USB support was missing.
Add support for USB as Boot_targets_devices.

Signed-off-by: Era Tiwari <era.tiwari@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:26 +05:30
Michael Walle
f8c5815c1b armv8: ls1028a: move FSL_LAYERSCAPE to kconfig
CONFIG_FSL_LAYERSCAPE is available in kconfig. There is no need to
define it per board; the ls1028a_common.h is really board dependent and
only fits to the NXP eval boards. Instead select CONFIG_FSL_LAYERSCAPE
when ARCH_LS1028A is selected.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:26 +05:30
Vladimir Oltean
e7005b3e80 fsl_dspi: Introduce DT bindings for CS-SCK and SCK-CS delays
Communication with some SPI slaves just won't cut it if these delays
(before the beginning, and after the end of a transfer) are not added to
the Chip Select signal.

These are a straight copy from Linux:
Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
drivers/spi/spi-fsl-dspi.c

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:26 +05:30
Simon Glass
347e0f00e8 binman: Re-enable concurrent tests
With the change to absolute imports the concurrent tests feature
unfortunately broke. Fix it.

We cannot easy add a warning, since the output messes up tests which check
the output.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-26 19:59:57 -06:00
Simon Glass
52b10dd7de binman: Don't change the descriptor in tests
At present testPackX86RomMeNoDesc removes the contents of the
descriptor.bin file and testPackX86RomMeMissingDesc removes the file
completely.

If a test that relies on this file happens to run after it is removed, it
will not work. Since we have no control over the selecting of tests that
run in parallel and series, we must avoid changing the files.

Update this tests to use separate files instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-26 19:59:57 -06:00
Patrick Delaunay
5d4f7b4e2a env: mmc: add redundancy support in mmc_offset_try_partition
Manage 2 copy at the end of the partition selected by config
"u-boot,mmc-env-partition" to save the U-Boot environment,
with CONFIG_ENV_SIZE and 2*CONFIG_ENV_SIZE offset.

This patch allows to support redundancy (CONFIG_ENV_OFFSET_REDUND).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
76b640c3f2 env: mmc: correct the offset returned by mmc_offset_try_partition
The output of the function mmc_offset_try_partition must be a
byte offset in mmc and not a multiple of blksz.

This function is used in mmc_offset(), called by mmc_get_env_addr()
and the offset is used in write_env(), erase_env() and read_env().

In these function, blk_start = offset / mmc->read_bl_len
or /write_bl_len so this offset is not a multiple of blksz.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
2b2f727500 env: mmc: allow support of mmc_get_env_dev with OF_CONTROL
Use the weak function mmc_get_env_dev in mmc_offset_try_partition
function to allow dynamic selection of mmc device to use
and no more use directly the define CONFIG_SYS_MMC_ENV_DEV.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
acbf93b526 test: env: add test for env info sub-command
Add a pytest for testing the env info sub-command:

test_env_info: test command with several option that
can be executed on real hardware device without assumption

test_env_info_sandbox: test the result on sandbox
with a known ENV configuration: ready & default & persistent

The quiet option '-q' is used for support in shell test;
for example:
  if env info -p -d -q; then env save; fi

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
7d813449b8 configs: sandbox: Enable sub command 'env info'
Enable support for sub command 'env info' in sandbox
with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily
at adding unit test.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
2f96b3238c cmd: env: check real location for env info command
Check the current ENV location, dynamically provided by the weak
function env_get_location to be sure that the environment can be
persistent.

The compilation flag ENV_IS_IN_DEVICE is not enough when the board
dynamically select the available storage location (according boot
device for example).

This patch solves issue for stm32mp1 platform, when the boot device
is USB.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
6718ebd032 cmd: env: add option for quiet output on env info
The "env info" can be use for test with -d and -p parameter,
in scripting case the output of the command is not needed.

This patch allows to deactivate this output with a new option "-q".

For example, we can save the environment if default
environment is used and persistent storage is managed with:
  if env info -p -d -q; then env save; fi

Without the quiet option, I have the unnecessary traces
First boot:
      Default environment is used
      Environment can be persisted
      Saving Environment to EXT4... File System is consistent

Next boot:
      Environment was loaded from persistent storage
      Environment can be persisted

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
8968288cb4 env: add failing trace in env_save
Add trace in env save to indicate any errors to end user and avoid
silent output when the command 'env save' is not executed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
Patrick Delaunay
d5a6a5a927 env: correct overflow check of env_has_init size
Correct the overflow check of the bit-field env_has_init with
the max value of env_location= ENVL_COUNT and no more with the
size of env_locations.

This bit-field is indexed by this enumerate and not by the position in
the env_locations (only used in env_get_location) and the
2 values are different, depending of thea ctivated CONFIG_ENV_IS_ options.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-26 14:35:30 -04:00
David Woodhouse
6731bef696 env/fat.c: allow loading from a FAT partition on the MMC boot device
I don't want to have to specify the device; only the partition.

This allows me to use the same image on internal eMMC or SD card for
Banana Pi R2, and it finds its own environment either way.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
[trini: Add #if/#else/#endif logic around CONFIG_SYS_MMC_ENV_DEV usage,
        whitespace changes]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-26 14:35:12 -04:00
Masahiro Yamada
2548493ab4 treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
cf081a52ad treewide: remove (phys_addr_t) casts from devfdt_get_addr()
This cast is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
8613c8d897 treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()
Use the _ptr suffixed variant instead of casting. Also, convert it to
dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE.

One curious part is an error check like follows in
drivers/watchdog/omap_wdt.c:

    priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
    if (!priv->regs)
            return -EINVAL;

devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error.
So, this code does not catch any error in DT parsing.

dev_read_addr_ptr() returns NULL on error, so this error check
will work.

I generated this commit by the following command:

 $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \
   xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/'

I manually fixed drivers/usb/host/ehci-mx6.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
7d8073e7cf fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()
Currently, fdt_fixup_mtdparts() only checks the compatible property.
It is pointless to fix up the disabled node.

Skip the node if it has the property:

  status = "disabled"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
53a896649a fdt_support: call mtdparts_init() after finding MTD node to fix up
Platform code can call fdt_fixup_mtdparts() in order to hand U-Boot's
MTD partitions over to the Linux device tree.

Currently, fdt_fixup_mtdparts() calls mtdparts_init() in its entry.
If no target MTD device is found, an error message like follows is
displayed:

    Device nand0 not found!

This occurs when the same code (e.g. arch/arm/mach-uniphier/fdt-fixup.c)
is shared among several boards, but not all of them support an MTD device.

Parse the DT first, then call mtdparts_init() only when the target MTD
node is found.

Yet, you still need to call mtdparts_init() before device_find().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Heinrich Schuchardt
331caeafad test/dm: check if devices exist
Running 'ut dm' on the sandbox without -D or -d results in segmentation
faults due to NULL pointer dereferences.

Check that device pointers are non-NULL before using them.

Use ut_assertnonnull() for pointers instead of ut_assert().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
5ab71ea4b1 arm: mach-k3: Use SOC driver for device identification
Make use of UCLASS_SOC to find device family and revision for
print_cpuinfo.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
29eb1c4aa6 configs: j721e_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3
Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 so the TI K3 SoC
driver can be used for SoC detection.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
bc2a293e42 configs: am65x_evm: Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3
Enable CONFIG_SOC_DEVICE and CONFIG_SOC_DEVICE_TI_K3 so the TI K3 SoC
driver can be used for SoC detection.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
e8918bccd8 arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3
SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
bec8b94e08 arm: dts: k3-am65-wakeup: Introduce chipid node
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3
SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
3e1b59cf3b dm: soc: Introduce soc_ti_k3 driver for TI K3 SoCs
Introduce an soc_ti_k3_driver that allows identification and selection
of SoC specific data based on the JTAG ID register for device
identification, as described for AM65x[0] and J721E[1] devices.

[0] http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
[1] http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
21e3c219ae test: Add tests for SOC uclass
Add a sandbox SOC driver, and some tests for the SOC uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
6d3b82df83 dm: soc: Introduce UCLASS_SOC for SOC ID and attribute matching
Introduce UCLASS_SOC to be used for SOC identification and attribute
matching based on the SoC ID info. This allows drivers to be provided
for SoCs to retrieve SoC identifying information and also for matching
device attributes for selecting SoC specific data.

This is useful for other device drivers that may need different
parameters or quirks enabled depending on the specific device variant in
use.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Dave Gerlach
726eb121b8 doc: Add new doc for soc ID driver model
Add a new documentation file for UCLASS_SOC and its usage to describe
the SoC Device ID framework that allows SoC identification and device
data matching.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
8ce8e42e86 fdt_support: add static to fdt_node_set_part_info()
This function is only called from fdt_fixup_mtdpart() in the same file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Nicolas Boichat
e1db5c9b08 patman: When no tracking branch is provided, tell the user
The user can either count the number of patches, or provide a
tracking branch.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Nicolas Boichat
949775689e patman: Make sure sendemail.suppresscc is (un)set correctly
Setting sendemail.suppresscc to all or cccmd leads to --cc-cmd
parameter being ignored, and emails going either nowhere, or
just to the To: line maintainer.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Michal Simek
50c7b723bd Revert "lib: fdt: Split fdtdec_setup_mem_size_base()"
This reverts commit 3ebe09d09a.

There is no user of this split function that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Michal Simek
62897c4344 Revert "lib: fdt: Split fdtdec_setup_memory_banksize()"
This reverts commit 118f4d4559.

There is no user of this split function that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Michal Simek
988341d84a ARM: rmobile: Switch back to fdtdec_setup_memory/banksize_fdt()
The commit 361377dbdb ("ARM: rmobile: Merge prior-stage firmware DT
fragment into U-Boot DT on Gen3") reverted changes introduced by commit
175f502734 ("ARM: renesas: Configure DRAM size from ATF DT fragment")
that's why there is no reason to use functions with _fdt() suffix because
parameter is gd->fdt_blob as is already for functions without _fdt()
suffix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Patrick Delaunay
e5ff9ab70a Add information for skipped commit options
The unsupported Commit-xxx option are silently skipped
and removed as 're_remove=Commit-\w*', this patch adds
warning message in this case to detect misspelled issue
for the 2 supported options:
  Commit-notes:
  Commit-changes:

For example: the final 's' is missing (Commit-note:)

NB: no issue for Series-xxx option as only the supported
    options are accepted (see valid_series in series.py)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Philippe Reynes
e8781dcc89 lib: libfdt: fdt_region: avoid NULL pointer access
The function fdt_find_regions look in the exclude list for each
property, even if the name is NULL. It could happen if the fit
image is corrupted. On sandbox, it generates a segfault.

To avoid this issue, if the name of a property is NULL, we report
an error and avoid looking in the exclude list.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00