Commit graph

83867 commits

Author SHA1 Message Date
Tom Rini
1c470f32f7 Prepare v2023.01-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 15:21:53 -05:00
Tom Rini
6616ddb0f0 Merge branch '2022-12-05-add-IPv6-support'
To quote the author:
This patch set adds basic IPv6 support to U-boot.
It is based on Chris's Packham patches
(https://lists.denx.de/pipermail/u-boot/2017-January/279366.html)
Chris's patches were taken as base. There were efforts to launch it on
HiFive SiFive Unmatched board but the board didn't work well. The code was
refactored, fixed some bugs as CRC for little-endian, some parts were implemented in
our own way, something was taken from Linux. Finally we did manual tests and the
board worked well.

Testing was done on HiFive SiFive Unmatched board (RISC-V)
2022-12-05 13:28:22 -05:00
Viacheslav Mitrofanov
a72926257c configs: Add IPV6 config to sandbox_flattree_defconfig
Allow to use IPV6 tests in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
bbd77c3e8b configs: Add IPV6 config to sandbox64_defconfig
Allow to use IPV6 tests in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
3688cf5927 configs: Add IPV6 config to sandbox_defconfig
Allow to use IPV6 tests in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
e4d30fd110 test: dm: eth: Add ip6_make_lladdr test
Add a test that checks generated Link Local Address. Use in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
789a2c7d37 test: dm: eth: Add ip6_make_snma test
Add a test that checks generated Solicited Node Multicast Address from our
ipv6 address. Use in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
8576dcdf00 test: dm: eth: Add ip6_addr_in_subnet test
Add a test if two address are in the same subnet. Use in sandbox

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
d9f5c41e9a test: dm: eth: Add csum_ipv6_magic test
Test checksum computation. csum_ipv6_magic() uses in upper layer
protocols as TCP/UDP/ICMPv6/etc to calculate payload checksum.

Series-changes: 3
- Fixed style problems

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
184ded4bec test: dm: eth: Add string_to_ip6 test
Add a test to check convertation from char* to struct in6_addr.
Use in sandbox

Series-changes: 3
- Fixed tests to use length param in string_to_ip6()

Series-changes: 5
- Add test under #ifdef

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:17 -05:00
Viacheslav Mitrofanov
eeb0a2c693 net: ping6: Add ping6 command
Implement ping6 command to ping hosts using IPv6. It works the same way as
an ordinary ping command. There is no ICMP request so it is not possible
to ping our host. This patch adds options in Kconfig and Makefile to
build ping6 command.

Series-changes: 3
- Added structures and functions descriptions
- Added to ping6_receive() return value instead of void

Series-changes: 4
- Fixed structures and functions description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
7fbf230d79 net: tftp: Add IPv6 support for tftpboot
The command tftpboot uses IPv4 by default. Add the possibility to use IPv6
instead. If an address in the command is an IPv6 address it will use IPv6
to boot or if there is a suffix -ipv6 in the end of the command it also
force using IPv6. All other tftpboot features and parameters are left
the same.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
ffdbf3bad5 net: ipv6: Incorporate IPv6 support into u-boot net subsystem
Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add
neighbor discovery mechanism into network init process. That is the
main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and
handle IPv6 packets.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
1feb697830 net: ipv6: Add implementation of main IPv6 functions
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives"
had only empty implementations and were exposed as API for futher
patches. This patch add implementation of these functions. Main
functions are: net_ip6_handler() - IPv6 packet handler for incoming
packets; net_send_udp_packet6() - make up and send an UDP packet;
csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460
section 8.1; ip6_addr_in_subnet() - check if an address is in our
subnet. Other functions are auxiliary.

Series-changes: 3
- Added comments
- Fixed style problems
- Fixed return codes instead of -1

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
43ab8ecc7d net: ipv6: Add ip6addr, gatewayip6, serverip6 variables callbacks
Implement actions on ip6addr, gatewayip6, serverip6 varaibles.
on_ip6addr - convert IPv6 string addr to struct ip6_addr
on_gatewayip6 - convert IPv6 string addr to struct ip6_addr
on_serverip6 - convert IPv6 string addr to struct ip6_addr

Series-changes: 3
- Removed memory allocation
- Substituted -1 for error code

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
d807199da7 net: ipv6: Enable IPv6 typeconversion specifier
Add the possibility to recognize IPv6 address in print function.
To output IPv6 address use %pI6 specifier.

Series-changes: 3
- Substituted #if (...) for if (...) to get better readability

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
2f7f2f2aa9 net: ipv6: Add string_to_ip6 converter
This functions is used as a converter from IPv6 address string notation
to struct ip6_addr that is used everywhere in IPv6 implementation. For
example it is used to parse and convert IPv6 address from tftpboot
command. Conversion algorithm uses two passes, first to verify syntax and
locate colons and second pass to read the address. In case of valid IPv6
address it returns 0.

Examples of valid strings:
	2001:db8::0:1234:1
	2001:0db8:0000:0000:0000:0000:1234:0001
	::1
	::ffff:192.168.1.1

Examples of invalid strings
	2001:db8::0::0          (:: can only appear once)
	2001:db8:192.168.1.1::1 (v4 part can only appear at the end)
	192.168.1.1             (we don't implicity map v4)

Series-changes: 3
- Added function description
- Added length parameter to string_to_ip6()

Series-changes: 4
- Fixed function description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
c6610e1d90 net: ipv6: Add Neighbor Discovery Protocol (NDP)
Implement basic of NDP. It doesn't include such things as Router
Solicitation, Router Advertisement and Redirect. It just has Neighbor
Solicitation and Neighbor Advertisement. Only these two features are used
in u-boot IPv6. Implementation of some NDP functions uses API that was
exposed in "net: ipv6: Add IPv6 basic primitives".

Also this patch inlcudes update in Makefile to build NDP.

Series-changes: 3
- Added structures and functions descriptions
- Fixed style problems

Series-changes: 4
- Fixed structures and functions description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
1dfa4ef14d net: ipv6: Add callbacks declarations to get access to IPv6 variables
Set up callbacks for main IPv6 variables ip6add, serverip6, gatewayip6
and set options to them in flag file. These variables are often set up by
users.

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
3cc04a3ab2 net: ipv6: Add IPv6 build options
Add options to Makefile and Kconfig file to build IPv6

Series-changes: 3
- Added help for IPv6 support

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:16 -05:00
Viacheslav Mitrofanov
33b5066a59 net: ipv6: Add IPv6 basic primitives
This patch is a collection of basic primitives that are prerequisite for
further IPv6 implementation.

There are structures definition such as IPv6 header, UDP header
(for TFTP), ICMPv6 header. There are auxiliary defines such as protocol
codes, padding, struct size and etc. Also here are functions prototypes
and its empty implementation that will be used as API for further patches.
Here are variables declaration such as IPv6 address of our host,
gateway, ipv6 server.

Series-changes: 3
- Added functions and structures descriptions
- Removed enums ND_OPT_*. It will be moved into further patches
- Substituted -1 for error codes

Series-changes: 4
- Changed functions and structures description style

Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 12:47:15 -05:00
Heinrich Schuchardt
304bc9f437 sandbox: fix sound driver
In the callback function we have to use memcpy(). Otherwise we add
the new samples on top of what is stored in the stream buffer.

If we don't have enough data, zero out the rest of the stream buffer.

Our sampling frequency is 48000. Let the batch size for the callback
function be 960. If we play a multiple of 20 ms, this will always be
a full batch.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:23 +01:00
Heinrich Schuchardt
3f01307ced doc: man-page for the sound command
Provide a man-page for the sound command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Heinrich Schuchardt
ff414fcc44 cmd: fix long text for sound command
Make it clear that if only 1 parameter is provided this is the duration.

The ISO symbol for hertz is Hz.

Fixes: c0c88533ff ("Sound: Add command for audio playback")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Heinrich Schuchardt
968eaaeaa7 test: test sandbox sound driver more rigorously
Consider unexpected values for frequency:

* negative frequency
* zero frequency
* frequency exceeding sampling frequency

As in these cases the sum of the samples is zero also check the count of
the samples.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Heinrich Schuchardt
d0e8777bee sound: avoid endless loop
'sound play 1 100000' results in an endless loop on the sandbox.

If the frequency exceeds half the sampling rate, zero out the output
buffer.

Fixes: 511ed5fdd3 ("SOUND: SAMSUNG: Add I2S driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 17:43:21 +01:00
Tom Rini
a50622d78c Xilinx changes for v2023.01-rc3-v2
xilinx:
 - Fix MAC address selection for System Controller from FRU
 - Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol)
 
 versal:
 - Create u-boot.elf for mini spi configurations
 
 versal-net:
 - Enable MT35XU flash
 
 zynq:
 - Add missing timer to DT for mini configurations
 
 zynqmp:
 - Do not include psu_init to U-Boot by default
 - Do not enable IPI by default to mini U-Boot
 - Update Luca's fragment
 - Fix SPL_FS_LOAD_PAYLOAD_NAME usage
 
 spi:
 - gqspi: Fix tapdelay values
 - gqspi: Fix 64bit address support
 - cadence: Remove condition for calling enable linear mode
 - nor-core: Invert logic to reflect sst26 flash unlocked
 
 net:
 - Add PCS/PMA phy support
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY422rQAKCRDKSWXLKUoM
 ITrXAJ9sVsVNwnjS99ZdNg64zx/Y5mSRlgCdGMho9/PT6BRmOV4IygwOsEGy7I8=
 =XsS5
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc3-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2023.01-rc3-v2

xilinx:
- Fix MAC address selection for System Controller from FRU
- Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol)

versal:
- Create u-boot.elf for mini spi configurations

versal-net:
- Enable MT35XU flash

zynq:
- Add missing timer to DT for mini configurations

zynqmp:
- Do not include psu_init to U-Boot by default
- Do not enable IPI by default to mini U-Boot
- Update Luca's fragment
- Fix SPL_FS_LOAD_PAYLOAD_NAME usage

spi:
- gqspi: Fix tapdelay values
- gqspi: Fix 64bit address support
- cadence: Remove condition for calling enable linear mode
- nor-core: Invert logic to reflect sst26 flash unlocked

net:
- Add PCS/PMA phy support
2022-12-05 08:33:19 -05:00
Tom Rini
bdaf047f51 Merge tag 'i2cfixes-for-v2023.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-i2c
i2c Fixes for v2023.01-rc3

- nuovoton driver:
  rename npcm_i2c -> npcm-i2c from Jim Liu
2022-12-05 08:33:01 -05:00
Algapally Santosh Sagar
7ad3c09e79 mtd: spi-nor-core: Invert logic to reflect sst26 flash unlocked
flash_is_locked is changed to flash_is_unlocked with commit 513c6071ce
("mtd: spi: Convert is_locked callback to is_unlocked"). sst26_is_locked()
is also changed to sst26_is_unlocked() but the logic remained same.
Invert the logic for the flash lock/unlock to work properly.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20221122051833.13306-1-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 10:01:45 +01:00
Michal Simek
b40d154ced xilinx: zynqmp: Fix SPL_FS_LOAD_PAYLOAD_NAME usage
SPL_FS_LOAD_PAYLOAD_NAME depends on SPL to be enabled.
If SPL is not enabled code still expects SPL_FS_LOAD_PAYLOAD_NAME to be
present. That's why setup proper dependency in the code.
And by doing so also change the logic around dfu_alt_info string
composition to be simpler.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/3989c390a4acae13a1b05c040e14fb3d68bced02.1669986373.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Ashok Reddy Soma
7d13f72d74 arm64: versal-net: Enable defconfig for Micron octal flashes
Micron mt35 series octal flashes are under config option
CONFIG_SPI_FLASH_MT35XU. Enable it in default defconfig for octal
flashes to be detected.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/dfaf73a72c7b408f1b8530f411c405d3dcf9f854.1669717110.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Ashok Reddy Soma
0d1a55fcbc spi: cadence-qspi: Remove condition for calling enable linear mode
cadence_qspi_apb_enable_linear_mode() has a weak function defined, so no
need to gaurd this under if (CONFIG_IS_ENABLED(ARCH_VERSAL)).

In cadence_qspi_apb_write_execute(), enable linear mode is called twice by
mistake, remove extra one.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20221129114134.18909-1-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:55 +01:00
Michal Simek
6a664a7bd4 ARM: zynq: Add missing twd timer for mini configurations
The commit b7e0750d88 ("zynq: Convert arm twd timer to DM driver")
switched timer to DM but missing to add nodes to all mini configurations.
Based on it missing timer end up in non functional system where any delay
doesn't work.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2020fc7e3d4760e890265485b3c7e18eb1caf8be.1669724598.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Michal Simek
92e6900536 arm64: zynqmp: Do not enable IPI by default
ZynqMP mini configurations are not using IPI driver and enabling this is
adding additional ~1200 Bytes (depends on configuration).
This ends up in situation that there is no enough space in OCM for
relocation that's why disable this driver for all mini configurations.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c71bab3927cb71ae517d9c21f59f3d5cf0caf712.1669734580.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Michal Simek
74673ca705 arm64: zynqmp: Do not include psu_init to U-Boot by default
The commit ed35de6170 ("Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to
Kconfig") converted CONFIG_ZYNQMP_PSU_INIT_ENABLED symbol and enabled it by
default which is not correct configuration.
Intention of this config was to have it enabled by default for SPL and
provide an option to users to also do low level initialization directly
from U-Boot.
That's why it is necessary to define second symbol with SPL marking in it
and properly use symbols depends on usage in Makefile.
Also disable ZYNQMP_PSU_INIT_ENABLED from boards which enables it by
default. CONFIG_SPL_ZYNQMP_PSU_INIT_ENABLED is enabled by default when SPL
is enabled.

Reported-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d5fcbd66b05bf0d7ef594e66464ee23b48c5e4cc.1669969083.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Luca Ceresoli
9129a6b49a board/xilinx/zynqmp/MAINTAINERS: change e-mail address for Luca Ceresoli
My Bootlin address is the preferred one now.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20221203214939.56608-1-luca@lucaceresoli.net
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:55 +01:00
Michal Simek
2e3c10eea0 xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entries
The commit ba74bcf3e0 ("xilinx: common: Remove
zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
because xlnx,eeprom link via DT chosen node is no longer used. But forget
to remove Kconfig entries which are used by this code only.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f97451ed33409838efea4071553b6da795cfc578.1669192026.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Michal Simek
f3538a3cbe xilinx: Add option to select SC id instead of DUT id for SC support
Reading MAC address from on board EEPROM requires different type for System
Controller (SC).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/90bb7cc5463568a690b979f18c8d42556986b46d.1669204122.git.michal.simek@amd.com
2022-12-05 08:55:54 +01:00
Venkatesh Yadav Abbarapu
906e20a613 spi: zynqmp_qspi: Add support for 64-bit read/write
When we pass the 64-bit address to read/write, only lower 32-bit
address is getting updated. Program the upper 32-bit address in the
DMA destination memory address MSBs register, which can handle upto
44-bit destination address.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20221125104413.26140-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:54 +01:00
Venkatesh Yadav Abbarapu
31e66aea37 arm64: versal: Enable REMAKE_ELF for mini_ospi/mini_qspi
Enable the config REMAKE_ELF in xilinx_versal_mini_ospi_defconfig
and xilinx_versal_mini_qspi_defconfig which generates u-boot.elf.
This commit a8c281d4b737("Convert CONFIG_REMAKE_ELF to Kconfig")
misses to enable this config in these defconfigs.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20221125084639.23835-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:54 +01:00
T Karthik Reddy
a5e770b21c spi: zynqmp_gqspi: Update tapdelay value
The driver was using an incorrect value for GQSPI_LPBK_DLY_ADJ_DLY_1
tapdelay for Versal for frequencies above 100MHz. Change it from 2 to 1
based on the recommended value in IP spec.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20221123090451.11409-1-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:54 +01:00
Lukas Funke
d9efdc7d42 arm64: zynqmp: dynamically mark r5 cores as used
When Linux boot takes over control of the pmu
(by signaling PM_INIT_FINALIZE via ipi), pmu will switch off 'unused'
rpu cores. The Xilinx zynqmp fsbl prevents switching off those cores by
marking rpu cores as 'used' when loading code partitions to those cores.
The current u-boot SPL is missing this behaviour, which results in
halting rpu cores during Linux boot.

This commit mimics the xilinx zynqmp fsbl behavior by marking r5 cores as
used when they are released during boot.

Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Signed-off-by: Lukas Funke <lukas.funke-oss@weidmueller.com>
Link: https://lore.kernel.org/r/20221028121547.26464-2-lukas.funke-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:54 +01:00
Andy Chiu
f3558be91e net: xilinx_axi: check PCS/PMA PHY status in setup_phy
Both PCS/PMA PHY and the external PHY need to have a valid link status
in order to have Ethernet traffic. Check and wait this status at
setup_phy() so that we could diagnose if there is a PHY issue.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20221101035800.912644-3-andy.chiu@sifive.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:54 +01:00
Andy Chiu
e23544cffe net: xilinx_axi: add PCS/PMA PHY
If we bridge an external PHY to Xilinx's PCS/PMA PHY and would like to
get and set the real status of the PHY facing the external world. Then
we should phy_connect() to the external PHY instead of the PCS/PMA one.
Thus, we add a pcs-handle DT entry, which have been merged in Linux, and
leave the configuration of it to the driver itself.

Unlike Linux, where the PCS/PMA PHY is managed by phylink, managing the
PCS/PMA PHY is only internal to the driver in U-Boot. The PCS/PMA PHY
pressents only when the phy-mode is configured as SGMII or 1000Base-X,
so it is always 1 Gbps and full-duplex and we may skip passing link
information out.

Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20221101035800.912644-2-andy.chiu@sifive.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:54 +01:00
Jim Liu
d7b8fa1a6c i2c: nuvoton: renamed the NPCM i2c driver
The Makefile name is npcm_i2c but the driver is npcm-i2c.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-12-05 06:00:37 +01:00
Tom Rini
d2c5607edd Pull request for efi-2023-01-rc3
Documentation:
 
 * describe DM firmware needed for j721e_evm
 * describe management of UEFI security data base with eficonfig
 
 UEFI:
 
 * code clean-up for eficonfig command
 * fix handling of DHCP aknowledge
 * correct EFI memory type used for U-Boot code
 * unit test for FatToStr() truncation
 * add an EFI binary to print boot hart ID
 
 Other:
 
 * improve parameter checks in console functions
 * fix variable initialization in blk_get_device_part_str
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmOKVdQACgkQxIHbvCwF
 GsREQxAAlhx05eYwItq2n7oDV65h2yFl5YaGo35v9HPG8DrLoeOdw/IpNCQ+Naao
 0VyIg+uFM/qvFTIwfC1NDVlzOiDBQgaFiUhe1Zvq8n8lJNdfAwgXvFQU5MOyxcDa
 4RZBYpwN+kJ2+6P98xtl8jIOJZ7jO/BLcR7Xss9dP2B7IJcczMrj5Kl2heanXjnk
 zhMHx8WC4rrSBZM4NxyPd6e04qxz1L1r0A6U0ZmVT1ferdaBb7LoXkQk4fINhI6a
 Z+1UKzKvTWDynHmKuuK5ujFyBbE7COqVGnR6uabZxOk1CS7EEJJyDdzYA5F4yVlf
 6DSDTzE72jhRPa7AQnYtwQA/+IPwkfRXo7n4eRERi135onm7ufy+aww/yeZ3RdJF
 BN5BRhFmJPT/KfQK/JgDZ3aDDYFjdcB+h2nm57DWeKB0nq/xsAMHhJ4rrB2yu1kn
 dmNP9v9EZtvp0wG2H4nIeXd7kKBGG4qZRqhfzBfNYQ899dubBEKUXv+DEfqSnh6k
 3v4W0V8sPjjvY+2hgiYyBnmmJP/MEG0T21uppFC9AcUKfaSTElRqkRpr+wDkB5qL
 xHwHuXYRBaMuhycs2W/6D1D3UaGg8YYzgOidMt0Pq0T+pq4V1bDXIlixE9nXZGl6
 tqy3WKMcIu85AYYqwt0OZnF4DWx8v2pRLhyGbkSPVoadmeDEcmg=
 =UmdO
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc3

Documentation:

* describe DM firmware needed for j721e_evm
* describe management of UEFI security data base with eficonfig

UEFI:

* code clean-up for eficonfig command
* fix handling of DHCP aknowledge
* correct EFI memory type used for U-Boot code
* unit test for FatToStr() truncation
* add an EFI binary to print boot hart ID

Other:

* improve parameter checks in console functions
* fix variable initialization in blk_get_device_part_str
2022-12-04 10:01:48 -05:00
Masahisa Kojima
30124c2bb9 doc: eficonfig: add description for UEFI Secure Boot Configuration
This commits adds the description for the UEFI Secure Boot
Configuration through the eficonfig menu.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Redacted the complete document.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-02 19:17:25 +01:00
Masahisa Kojima
140a8959d4 eficonfig: use efi_get_next_variable_name_int()
eficonfig command reads all possible UEFI load options
from 0x0000 to 0xFFFF to construct the menu. This takes too much
time in some environment.
This commit uses efi_get_next_variable_name_int() to read all
existing UEFI load options to significantlly reduce the count of
efi_get_var() call.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2022-12-02 19:17:25 +01:00
Masahisa Kojima
3ac026ae46 efi_loader: utility function to check the variable name is "Boot####"
Some commands need to enumerate the existing UEFI load
option variable("Boot####"). This commit transfers some code
from cmd/efidebug.c to lib/efi_loder/, then exposes
efi_varname_is_load_option() function to check whether
the UEFI variable name is "Boot####".

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-02 19:17:25 +01:00
Masahisa Kojima
78b1ccc430 eficonfig: use u16_strsize() to get u16 string buffer size
Use u16_strsize() to simplify the u16 string buffer
size calculation.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-02 19:17:25 +01:00