Commit graph

11 commits

Author SHA1 Message Date
Hannes Schmelzer
4c302b9a65 cosmetic: change Author/MAINTAINER Name from Petermaier to Schmelzer
Since i've been married, i also have a new surname.
Mr. Petermaier moved to Mr. Schmelzer.

In this patch i update all files in which my (old) name is present.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2015-05-28 11:17:48 -04:00
Hannes Petermaier
e0e3aa50b5 board/BuR/tseries: change pinmux
some pins on the board have been rerouted to other peripherals, so we
change the pinmux to apply with hardware-design.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-04-23 08:52:26 -04:00
Hannes Petermaier
d79c138c75 board/BuR/tseries: reactivate NAND-board
The NAND-version has been become a bit orphan.
Now we need to reactivate it, so bring necessary things:

- loading devicetree
- switch control signal to correct pins
- setup pinmux
- default-environment

up to date.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-04-23 08:52:26 -04:00
Hannes Petermaier
2b5b2be5e9 board/BuR/common: move I2C initialization from common part to board-specific
At this time I2C and responsible pin-mux is setup during PMIC initialziation
within common.c, this is possible because today PMIC is always connected on
I2C0.

In Future this will be changed, PMIC isn't anymore connected to bus0 in call
cases.

So we do following:
- rename enable_i2c_pin_mux0 to enable_i2c_pin_mux to be generic for enabling
  pin-mux on different or more busses.
- move the call to i2c_pin_mux and i2c_init from common.c to the specific
  board.c

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-28 12:07:44 -04:00
Hannes Petermaier
a6ec579f7d board/BuR/tseries: Chg Pinmux - enable UART1 pins
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:18 -05:00
Hannes Petermaier
71d75d16ef board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO
On boards were we have no NAND-flash soldered, we want to use those free pins
as regular gpio.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:18 -05:00
Hannes Petermaier
2f32ea70c4 board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:18 -05:00
Hannes Petermaier
207828e215 board/BuR: fix pinmux for MII Ethernet Interface
The lines COL (collision detect) and CRS (carrier sense) needs to be connected
and muxed to the CPSW MAC for a proper function in half-duplex Mode of the
interface.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Cc: Tom Rini <trini@ti.com>
2014-10-10 09:44:45 -04:00
Hannes Petermaier
1ab6f61a1a board/BuR/tseries: cosmetic changes
Cc: trini@ti.com
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-06-06 17:46:16 -04:00
Hannes Petermaier
9a1063ebde board/BuR/tseries: Add support for using 8-bit on eMMC
Cc: trini@ti.com
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-06-06 17:46:15 -04:00
Hannes Petermaier
893c04e17c board: Add support for B&R T-Series Motherboard
Adds support for Bernecker & Rainer Industrieelektronik GmbH T-Series
Motherboard, using TI's AM3352 SoC.

Most of code is derived from TI's AM335x_EVM

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-02-21 13:55:40 -05:00