Commit graph

12369 commits

Author SHA1 Message Date
Wolfgang Denk
17f79e45e1 cmd_bmp.c: message about compressed formats is debug info only.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
2011-02-09 21:32:20 +01:00
Wolfgang Denk
494a7d215b Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2011-02-09 21:22:58 +01:00
Wolfgang Denk
65b57ebb30 Merge branch 'next' of git://git.denx.de/u-boot-nios 2011-02-09 20:54:53 +01:00
Wolfgang Denk
fced09ae38 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2011-02-09 20:50:26 +01:00
Scott Wood
eef1d7199d NAND: env: remember the flags used in the previous environment
Previously, uninitialized stack space was being referenced.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-02-08 15:25:02 -06:00
Thomas Chou
d8a593c68b nios2: add gpio_is_valid
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2011-02-08 08:29:53 -05:00
Thomas Chou
85debefaf2 nios2: use long for ssize_t
This is consistent with nios2-linux. And resolved the warning,

cmd_nvedit.c: In function `do_env_export':
cmd_nvedit.c:660: warning: size_t format, ssize_t arg (arg 3)

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2011-02-08 08:29:53 -05:00
Thomas Chou
df8f125261 altera_spi: add spi_set_speed
Added this for mmc_spi driver. Though altera spi core does not
support programmable speed. It is fixed when configured in
sopc-builder.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2011-02-08 08:29:53 -05:00
Thomas Chou
e91d54535f nios2: add gpio_free
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2011-02-08 08:29:53 -05:00
Shinya Kuribayashi
9d3f9118a9 MIPS: Move VCT boards to boards.cfg
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
Acked-by: Stefan Roese <sr@denx.de>
2011-02-07 22:05:50 +09:00
Dirk Eibach
2da0fc0d0f ppc4xx: Add DLVision-10G board support
Board support for the Guntermann & Drunck DLVision-10G.
Adds support for multiple FPGAs per board for gdsys 405ep
architecture.
Adds support for dual link osd hardware for gdsys 405ep.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2011-02-07 11:13:16 +01:00
Wolfgang Denk
8d4addc3c3 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2011-02-06 22:41:53 +01:00
Wolfgang Denk
367c6651a8 Merge branch 'master' of git://git.denx.de/u-boot-usb 2011-02-06 22:39:50 +01:00
Wolfgang Denk
e9e481f74b Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2011-02-06 22:28:34 +01:00
Joakim Tjernlund
26e5f794d3 mpc83xx: Use correct register to calculate clocks.
Use SPMR instead of HRCWL when calculating clocks as HCRWL
may be changed and the CPU will not pick up all changes
until there is a POR. u-boot will think SPMF has changed and get
the clocks wrong.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-02-05 17:06:57 -06:00
Leo Liu
10fa8d7c70 mpc83xx: fix pcie configuration space read/write
This patch fix a problem for the pcie enumeration when the mpc83xx
pcie controller is connected with switch or we use both of the two
pcie controller.

Signed-off-by: Leo Liu <liucai.lfn@gmail.com>

fix codingstyle and compiler warning: 'pcie_priv' defined but not used

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2011-02-05 17:01:52 -06:00
Shinya Kuribayashi
536884f915 MIPS: Move Inca-IP targets to boards.cfg
At the same time, fix up CPU_CLOCK_RATE to have the CONFIG_ prefix to
work with boards.cfg.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 22:45:41 +09:00
Shinya Kuribayashi
8d573fdcc4 MIPS: Move Qemu MIPS target to boards.cfg
CONFIG_QEMU_MIPS is already provided by <configs/qemu-mips.h>, so we
don't generate it using the options fields in boards.cfg.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 22:45:41 +09:00
Alexander Holler
ce297a8f7e USB: Change the necessary defines to get debug output
While debugging some USB stuff, I've first missed that there are actually
two defines necessary to get usefull output. The one needed to get debug output
for the communication with HUBs was burried somewhere deep inside the code.

Change that so that a #define DEBUG is enough while still leaving the possibility
to reduce unwanted debug output.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
2011-02-05 13:54:51 +01:00
Alexander Holler
cb44091fdf USB: Fix device stati for removable and powerctrl (typo)
I currently don't know if the error could have other consequences
than a wrong output when turning debug on.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
2011-02-05 13:54:51 +01:00
Shinya Kuribayashi
5efd0da9b6 MIPS: Move Alchemy Au1x00 based boards to boards.cfg
CONFIG_GTH2 is already provided by <configs/gth2.h>, so we don't
generate it using the options fields in boards.cfg.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 20:07:41 +09:00
Shinya Kuribayashi
c6dc8a734d cmd_ide: Fix an unused CONFIG_AU1X00 symbol to work as intended
commit 8bde63eb3f ([MIPS] Rename Alchemy
processor configs into CONFIG_SOC_*) forgot to pick up this one.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 20:06:03 +09:00
Daniel Schwierzeck
17a990b550 MIPS: dbau1x00: Remove unused flash driver stub
All dbau1x00 boards use the CFI driver so this stub driver is useless
and should not be compiled.

This patch fixes the error:

u-boot-git/board/dbau1x00/flash.c:34: multiple definition of `flash_init'
drivers/mtd/libmtd.o:u-boot-git/drivers/mtd/cfi_flash.c:2084: first defined here
board/dbau1x00/libdbau1x00.o: In function `write_buff':
u-boot-git/board/dbau1x00/flash.c:40: multiple definition of `write_buff'
drivers/mtd/libmtd.o:u-boot-git/drivers/mtd/cfi_flash.c:1265: first defined here

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 20:05:31 +09:00
Daniel Schwierzeck
ec36d1f422 MIPS: Purple: Fix multiple definition error on final linking of u-boot binary
The linker of recent toolchains complains about multiple definitions
on final linking of u-boot binary. This patch removes all redundant
object files from u-boot.lds those are already added to .text section
by the linker.

That patch could not be tested but the resulting u-boot.map still looks
good. The start symbol is at 0xB0000000, the environment at 0xB0008000
so u-boot should boot.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 20:05:14 +09:00
Daniel Schwierzeck
383015b2cc MIPS: VCT: Fix enabling of unwanted options if networking or USB support are disabled
Some VCT boards lacks the support of networking or USB.
Additionally that support is disabled in small image
configurations.

If CONFIG_CMD_NET should not used the CONFIG_CMD_NFS option
have to be disabled too. Otherwise the linker fails with
unresolved symbols.

If CONFIG_VCT_SMALL_IMAGE is set than CONFIG_CMD_NET and
CONFIG_CMD_USB are disabled at the end of vct.h.
This is not adequate because CONFIG_CMD_USB enables additional
options and the linker fails again with unresolved symbols.

This patch adds an early check against CONFIG_VCT_SMALL_IMAGE
so the additional options are only enabled if they are really
needed.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2011-02-05 17:15:05 +09:00
Wolfgang Denk
f69b980d10 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2011-02-04 21:44:46 +01:00
Kumar Gala
04a641df25 powerpc/8xxx: Fix possible compile issue related to P1013
The P1013 is a single core version of P1022 and thus should use the
p1022_serdes.c code.  It was acciently pointing to p1013_serdes.c which
doesn't exist.

Reported-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-04 14:04:21 -06:00
Wolfgang Denk
4bfa18fb99 Merge branch 'master' of git://git.denx.de/u-boot-sh 2011-02-04 20:38:27 +01:00
York Sun
d34897d329 powerpc/85xx: Enable ECC on MPC8572DS
Using hwconfig to turn on/off ECC, without re-compiling.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:13 -06:00
York Sun
91671913f7 powerpc/mpc85xx: implement workaround for errata DDR111 and DDR134
Workaround for the following errata:
DDR111 - MCKE signal may not function correctly at assertion of HRESET
DDR134 - The automatic CAS-to-Preamble feature of the DDR controller can
         calibrate to incorrect values

These two workarounds must be implemented together because they touch
common registers.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:13 -06:00
York Sun
eb0aff77c8 powerpc/85xx: Rename MPC8572 DDR erratum to DDR115
Use unique erratum number instead of platform number.
Enable command that reports errata on MPC8572DS.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:13 -06:00
York Sun
67f9447634 powerpc/85xx: Enable Errata command on MPC8572DS
Also removed duplicate CONFIG_CMD_IRQ define.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:13 -06:00
York Sun
e1df0de493 powerpc/85xx: Remove unnecessary polling loop from DDR init
This polling loop is not required normally, unless specifically stated in
workaround.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:12 -06:00
Kumar Gala
5103a03a0b fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020)
Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 4, 8,
and 12. Program one more than the desired value: 4 -> 5, 8 -> 9, 12 -> 13.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:12 -06:00
Kumar Gala
6e7f0bc0ce powerpc/85xx: Enable ESDHC111 Erratum on P2010/P2020 SoCs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-02-03 02:46:12 -06:00
Nobuhiro Iwamatsu
e72f46787f sh: sh7785lcr: Fix out of tree building
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-03 16:54:19 +09:00
Alexander Holler
920a5dd232 NAND: Fix saving of redundand environment
When redundand environments are used the serial needs
to get increased, otherwise the old one will still be used.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
2011-02-02 16:14:08 -06:00
Wolfgang Denk
42d44f631c Prepare v2011.03-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-02 22:37:32 +01:00
Wolfgang Denk
d1a24f0618 Minor Coding Style Cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-02 22:36:10 +01:00
Wolfgang Denk
be9db564de Merge branch 'master' of /home/wd/git/u-boot/custodians 2011-02-02 21:57:19 +01:00
Alexander Holler
89ffa8dbb5 Print compiler and linker version with the version command
After years of unsuccessful research I've finally shamelessly stolen other
peoples intellectual properties to present the all-new and world-changing
updated version command:
-
U-Boot>> version

U-Boot 2010.12-00014-g7435056-dirty (Jan 18 2011 - 23:19:38)
MyBoard
gcc (GCC) 0.42 (Distro foobar)
GNU ld (GNU Binutils) 0.314159265
-
May the toolchain bugs rest in peace.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
2011-02-02 21:56:39 +01:00
Yoshihiro Shimoda
c9cb009560 change email address in MAINTAINERS
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2011-02-02 21:30:43 +01:00
Yoshihiro Shimoda
9274b7b2ea change email address in MAINTAINERS
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:42 +09:00
Yoshihiro Shimoda
8e9c897b21 sh: add support for sh7757lcr board
The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.

This patch supports the following functions:
 - 256MB DDR3-SDRAM
 - SPI ROM
 - Ethernet

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:41 +09:00
Yoshihiro Shimoda
6639562e6a spi: add support SuperH SPI module
SH7757 has SPI module. This patch supports it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:41 +09:00
Yoshihiro Shimoda
68260aab93 net: sh_eth: add cache handling
Some CPU needs cache handling. So this patch add the config of
CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:41 +09:00
Yoshihiro Shimoda
3d0075fa7a README: add description of sh_eth driver
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:41 +09:00
Yoshihiro Shimoda
36781e4897 sh: add support the CONFIG_SYS_LDSCRIPT
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:38:41 +09:00
Nobuhiro Iwamatsu
a8d954ba26 sh: Remove config.mk for shmin board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:18:45 +09:00
Nobuhiro Iwamatsu
54fbf475cd sh: Remove config.mk for espt board
Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the
unnecessary config.mk file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-02 16:18:45 +09:00