Commit graph

20 commits

Author SHA1 Message Date
Michal Simek
3c1eaec012 arm: zynq: Drop #address-cells and #size-cells from gpio-keys
dtc is showing some warnings and this change was also done in
the Linux kernel as "Input: gpio-keys - clean up device tree binding
example"
with this fragment in commit message
"Drop #address-cells and #size-cells, which are not required by the
gpio-keys binding documentation, as button sub-nodes are not devices."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15 08:06:31 +02:00
Javier Martinez Canillas
a3e10642da ARM: dts: zynq: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
c78a80ad13 arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
i2c muxes should described like this.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
051a8ad7bb arm: zynq: Sync up licenses with mainline kernel
Use different location for SPDX line. Also update dates for new mainline
DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Sai Pavan Boddu
5fad1ab3d0 arm: zynq: Add device-type property for zynq ethernet phy nodes
Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:07 +01:00
Chirag Parekh
57bcc7fd37 arm: zynq: Add SCL & SDA GPIO entries for recovery
Wire i2c pinmuxing gpio recovery for zc702.

Signed-off-by: Chirag Parekh <chiragp@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:07 +01:00
Sudeep Holla
a930ca572a ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to
check for/support the legacy "gpio-key,wakeup" boolean property to
enable gpio buttons as wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:12 +01:00
Michal Simek
cc7978bef9 ARM: zynq: Remove DTC 1.4.2 warnings
DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name,
but no reg property

This patch is fixing them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15 15:30:38 +01:00
Michal Simek
a95d54b490 ARM: zynq: Align spi and qspi node locations
Keep nodes alphabelitally sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13 18:29:02 +02:00
Christian Kohn
169050e4f5 ARM: zynq: zc702: Add adv7511 on i2c bus
Add bindings for adv7511.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Punnaiah Choudary Kalluri
c9132b1e44 ARM: zynq: DT: Add ethernet phy reset information
Added phy reset gpio information for gem0.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
936bbc5d16 ARM: zynq: Fix bootargs in board dtsi
- Sync with Linux kernel
- Remove rootfs
- Remove earlyprintk

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
d9ae52c8f0 zynq: sdhci: Move driver to DM
Move driver to DM

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:29 +01:00
Simon Glass
035c6b271d arm: zynq: dts: Add U-Boot device tree additions
We need to mark some device tree nodes so that they are available before
relocation. This enables driver model to find these automatically. In the
case of SPL it ensures that these nodes will be retained in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Jagan Teki
e9cf6ec516 dts: zc702: Enable zynq qspi controller node
Enabled zynq qspi controller node for zc702 board.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-10-25 20:17:01 +05:30
Michal Simek
91f9f17262 ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys
Adds the two MIO connected pushbuttons on the zc702 board to the
devicetree as a single multi-key device for us with the gpio-keys driver.

Signed-off-by: Ezra Savard <ezra.savard@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:26 +02:00
Michal Simek
999667ca9c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel
Syncup with the latest DT from the Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:25 +02:00
Masahiro Yamada
9f9d41bad1 zynq: add UART nodes to device tree to initialize UART with OF
Commit c9416b92 added OF UART initialization support
but aliases nodes are missing in device tree.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
Tested-by: Michal Simek <michal.simek@xilinx.com> [on ZC702 board]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-15 13:57:31 +02:00
Masahiro Yamada
7d34c5de72 zynq: add memory nodes to device tree to initialize DRAM with OF
Commit 9e0e37ac added OF RAM initialization support
but memory nodes are missing in device tree.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
Tested-by: Michal Simek <michal.simek@xilinx.com> [on ZC702 board]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-05-15 13:57:30 +02:00
Masahiro Yamada
5ab502cb89 dts: move device tree sources to arch/$(ARCH)/dts/
Unlike Linux Kernel, U-Boot historically had *.dts files under
board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/.

I think arch/$(ARCH)/dts dicretory is a better location
to store both *.dts and *.dtsi files.

For example, before this commit, board/xilinx/dts directory
had both Microblaze dts (microblaze-generic.dts) and
ARM dts (zynq-*.dts), which are totally unrelated.

This commit moves *.dts to arch/$(ARCH)/dts/ directories,
allowing us to describe nicely mutiple DTBs generation in the next commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:10:05 -05:00
Renamed from board/xilinx/dts/zynq-zc702.dts (Browse further)