Commit graph

79 commits

Author SHA1 Message Date
Sean Anderson
1cbfed8d3e test: Add gpio-sysinfo test
This adds a test for the gpio-sysinfo driver.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-04 07:57:18 -04:00
Wasim Khan
57c675d699 sandbox: enable IRQ using select for sandbox architecture
Enable IRQ using select for sandbox architecture.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-20 07:31:35 -04:00
Tom Rini
2fbc804715 Merge tag 'ti-v2021.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Support for pinmux status command on beaglebone
- Updates for MMC speed modes for J721e-evm
- Fix MMC booting on omap35_logic_somlv board
2021-04-18 08:46:39 -04:00
Dario Binacchi
5532262d46 test: pinmux: add test for 'pinctrl-single' driver
The test adds two pinmux nodes to the device tree, one to test when a
register changes only one pin's mux (pinctrl-single,pins), and the other
to test when more than one pin's mux is changed (pinctrl-single,bits).
This required replacing the controller's register access functions when
the driver is used on sandbox.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 11:17:15 +05:30
Simon Glass
48f45455bf Convert CONFIG_MISC_INIT_F to Kconfig
This converts the following to Kconfig:
   CONFIG_MISC_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06 16:33:19 +12:00
Nicolas Saenz Julienne
e88018769c dm: test: Add test case for dev->dma_offset
Add test to validate dev->dma_offset is properly set on devices.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18 11:56:25 +01:00
Tom Rini
472a716b8f configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-29 13:56:04 -05:00
Patrick Delaunay
67c7e9af7a configs: sandbox: activate DEBUG_UART
Add CONFIG_DEBUG_UART=y for all sandbox defconfig
as it is already done in sandbox_defconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-22 20:39:25 -07:00
Tom Rini
53def460d2 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 12:50:32 -05:00
Simon Glass
3a8ee3df83 board: Rename uclass to sysinfo
This uclass is intended to provide a way to obtain information about a
U-Boot board. But the concept of a U-Boot 'board' is the whole system,
not just one circuit board, meaning that 'board' is something of a
misnomer for this uclass.

In addition, the name 'board' is a bit overused in U-Boot and we want to
use the same uclass to provide SMBIOS information.

The obvious name is 'system' but that is so vague as to be meaningless.
Use 'sysinfo' instead, since this uclass is aimed at providing information
on the system.

Rename everything accordingly.

Note: Due to the patch delta caused by the symbol renames, this patch
shows some renamed files as being deleted in one place and created in
another.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 10:18:20 +08:00
Patrick Delaunay
f9a48654ee configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_RLE8

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:26:14 +02:00
Suneel Garapati
4cf56ec07f pci: pci-uclass: Add multi entry support for memory regions
Enable PCI memory regions in ranges property to be of multiple entry.
This helps to add support for SoC's like OcteonTX/TX2 where every
peripheral is on PCI bus.

Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
2020-08-25 08:01:16 +02:00
Tom Rini
554e5514ac configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 15:31:07 -04:00
Patrick Delaunay
ef5cc2e5c6 test: sandbox: add test for erase command
Add test for the erase command tested on ENV in EXT4.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
72773c0655 configs: sandbox: activate command env select and env load
Add support of environment location with the new env command:
'env select' and 'env load'

The ENV backend is selected by priority order
- 0 = "nowhere" (default at boot)
- 1 = "EXT4"

To test EXT4 env support, this backend is selected by name:
> env select EXT4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Patrick Delaunay
4df087ccf9 configs: sandbox: activate env in ext4 support
Activate ENV in EXT4 support in sandbox.

The sandbox behavior don't change; the default environment with
the nowhere backend (CONFIG_ENV_IS_NOWHERE)is still used:
the weak function env_get_location() return ENVL_NOWHERE for priority 0.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-31 10:13:00 -04:00
Adam Ford
3275f26bb6 Convert CONFIG_BOOTP_SEND_HOSTNAME to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_SEND_HOSTNAME

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00
Tom Rini
f7d0ae9c63 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 08:46:52 -04:00
Tom Rini
4e05c167a7 binman support for FIT
new UCLASS_SOC
 patman switch 'test' command
 minor fdt fixes
 patman usability improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl8eNVURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebA7Qf/QVH9a07SAXXHjIXN7lVkxtf27hevxS80
 +4imgF52UrQHvdMHxw0m7Kmlt6znP6ThziVRMjCQomYILFiKkLrXJcMtqPoN72oI
 XxYnHShMI0Gjoss0rmP0yDNFkUN6Z09Q6wWoHwQG23Hu1kA6E8uw9gZf6dFwFzSB
 7+ER6Omwl2ziyRI137BQnKXmfkJMXB9+mZPZchZYKJF9HeQPFMXhKO6Rte1Qh7Ei
 oEJBKLghpjFZpu9nNkxXiDzFcm/UromG699U45Vgm11p1gp2m2HtOi+6zAtM2IXP
 IQUkG9zfp8sKonmEdNURP9LzjMazH7As9yGrNMn/G/AWVSg7SLmAKg==
 =V8Rw
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-20jul20-take2a' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

binman support for FIT
new UCLASS_SOC
patman switch 'test' command
minor fdt fixes
patman usability improvements
2020-07-27 11:15:37 -04:00
Patrick Delaunay
7d813449b8 configs: sandbox: Enable sub command 'env info'
Enable support for sub command 'env info' in sandbox
with CONFIG_CMD_NVEDIT_INFO. This is aimed primarily
at adding unit test.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-26 14:35:30 -04:00
Dave Gerlach
21e3c219ae test: Add tests for SOC uclass
Add a sandbox SOC driver, and some tests for the SOC uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25 14:46:57 -06:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Dave Gerlach
fbde39f417 test: Add tests for SOC uclass
Add a sandbox SOC driver, and some tests for the SOC uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Rasmus Villemoes
8ce16be94b sandbox: add rtc command to defconfigs
In order to allow adding unit tests of the rtc command, add it to the
various sandbox defconfigs.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-07-09 06:02:45 +02:00
Heiko Schocher
7012865e96 gpio: fix test.py for gpio label lookup
commit 2bd261dd17 ("gpio: search for gpio label if gpio is not found through bank name")

disabled DM_GPIO_LOOKUP_LABEL which is needed
in sandbox defconfigs, as we have tests for this
functionality.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-07-08 08:49:34 -04:00
Tom Rini
6e7d7aa2e2 Merge branch 'next'
Merge all outstanding changes from the current next branch in now that
we have released.
2020-07-06 15:46:38 -04:00
Heiko Schocher
9ba84329dc sandbox, test: add test for GPIO_HOG function
currently gpio hog function is not tested with "ut dm gpio"
so add some basic tests for gpio hog functionality.

For this enable GPIO_HOG in sandbox_defconfig, add
in DTS some gpio hog entries, and add testcase in
"ut dm gpio" command.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-05 08:06:09 -04:00
Tom Rini
e2dce7a532 Convert CONFIG_BOOTP_DNS2 to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_DNS2
   CONFIG_BOOTP_PXE_CLIENTARCH

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26 10:29:05 -04:00
AKASHI Takahiro
02c770b4e4 sandbox: drop CONFIG_SYS_RELOC_GD_ENV_ADDR
As we discussed in [1], this option is not needed for sandbox build.

[1] https://lists.denx.de/pipermail/u-boot/2020-February/400182.html

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-29 20:55:45 -06:00
Ashok Reddy Soma
702de89cc6 treewide: mem: Move mtest related defines to Kconfig
Move below defines which are used by mtest utility to Kconfig.
CONFIG_SYS_MEMTEST_START
CONFIG_SYS_MEMTEST_END

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Fix kmcoge5ne board, re-run migration as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-08 12:02:56 -04:00
Heinrich Schuchardt
48e4288aed sandbox: enable CMD_BOOTEFI_HELLO and CMD_EFIDEBUG
'bootefi hello' is used in one of the Python tests.

efidebug can be used to verify the correct initialization of the UEFI
sub-system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromum.org>
2020-04-16 08:07:58 -06:00
Heinrich Schuchardt
292defdd2b configs: sandbox: enable LOG_SYSLOG
For testing purposes enable the syslog logging driver.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
AKASHI Takahiro
2201fe70d8 test: enable RSA library test on sandbox
We want to always run RSA library test on sandbox build in Travis CI.
Just adding CONFIG_RSA_VERIFY_WITH_PKEY would be good enough for this
purpose.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-03-12 08:20:39 -04:00
Tom Rini
9e1d65f36b configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-28 13:28:38 -05:00
Anatolij Gustschin
8a6ffeda97 video: enable VIDEO_ANSI and all VIDEO_BBP options
This partially reverts changes by commit 2cc393f32f
("video: make BPP and ANSI configs optional") since it
caused issues with other boards (missing LCD console
output on pinebook, x86 platform or sandbox). Enable
all disabled options again and opt out of not supported
color depth in board defconfigs.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Vagrant Cascadian <vagrant@debian.org>
2020-02-06 16:11:47 -05:00
Tom Rini
052170c6a0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 13:38:00 -05:00
Simon Glass
fbb0efdd27 sandbox: Add a test for IRQ
Add a simple sandbox test for this uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:12 +08:00
Simon Glass
3e17ffbb44 sandbox: Add PCI driver and test for p2sb
Add a sandbox driver and PCI-device emulator for p2sb. Also add a test
which uses a simple 'adder' driver to test the p2sb functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:11 +08:00
Anatolij Gustschin
2cc393f32f video: make BPP and ANSI configs optional
Many boards do not use all selected framebuffer depth
configurations, for such boards there is some unused
code in video and console uclass routines. Make depth
specific code optional to avoid dead code and slightly
reduce binary size. Also make ANSI code optional for
the same reason. When i.e. using only VIDEO_BPP16 the
code size shrinks (below values when using gcc-7.3.0):

  $ ./tools/buildman/buildman -b video-wip -sS wandboard
  ...
  01: Merge git://git.denx.de/u-boot-sh
  02: video: add guards around 16bpp/32bbp code
  03: video: make BPP and ANSI configs optional
         arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-06 16:38:51 +01:00
Heinrich Schuchardt
dbcbdad92c sandbox: enable USB_KEYBOARD_FN_KEYS
Enable the support of function keys on the USB keyboard. This is necessary
to test the USB keyboard driver.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25 13:28:53 +01:00
Tom Rini
a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00
Tom Rini
8d8ee47e03 env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not.  In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20 12:24:50 -05:00
Tom Rini
0be2ecd486 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 17:58:06 -05:00
Tom Rini
898c40c0d6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Port more CCF code to work with i.MX8 devices.
2019-08-02 13:29:46 -04:00
Peng Fan
7bd6432210 configs: sandbox: Enable composite clk
Enable composite clk for sandbox test

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-31 09:20:51 +02:00
Bartosz Golaszewski
3ec7fc45e5 sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon
remove it altogether. Stop building it in sandbox mode.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29 17:58:52 -04:00
Lukasz Majewski
3c944f206f defconfig: sandbox: Enable SANDBOX_CLK_CCF to reuse generic CCF code
Enable by default the Common Clock Framework [CCF] clock code for sandbox.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 14:50:30 +02:00
Tom Rini
f512851413 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 10:11:23 -04:00
Marek Vasut
3f6bcdf6a5 net: Convert CONFIG_IP_DEFRAG to Kconfig
Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers
and whitelist. This patch is a follow-up on a patch by Christian
Gmeiner with the added config/header/whitelist updates.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-14 16:03:56 -04:00
Tom Rini
344a0e4367 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-26 14:45:25 -04:00