Commit graph

27087 commits

Author SHA1 Message Date
roy zang
ee311214e0 Clean up the code according to codestyle:
(1) remove some C++ comments.
(2) remove trailing white space.
(3) remove trailing empty line.
(4) Indentation by table.
(5) remove {} in one line condition.
(6) add space before '(' in function call.
Remove some weird printf () output.
Add necessary comments.
Modified Makefile to support building in a separate directory.
2006-12-01 11:47:36 +08:00
Wolfgang Denk
dd520bf314 Code cleanup. 2006-11-30 18:02:20 +01:00
Stefan Roese
5c97aeb8d8 Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git 2006-11-30 13:08:32 +01:00
Wolfgang Denk
ab07b6c221 Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.git 2006-11-30 02:01:32 +01:00
Wolfgang Denk
8d9a8610b8 Code cleanup. Update CHANGELOG. 2006-11-30 01:54:07 +01:00
Grant Likely
726e90aacf [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
not the XLB frequency.

This patch depends on the previous patches for MPC52xx device tree support

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2006-11-29 16:23:42 +01:00
Stefan Roese
1eac2a7141 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".

Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29 16:14:05 +01:00
Stefan Roese
1bdd46832a [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
In the bootvx command the load address was only read from the env
variable "loadaddr" and not optionally passed as paramter as described
in the help. This is fixed with this patch. The behaviour is now the
same as in the bootelf command.

Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29 16:13:43 +01:00
Stefan Roese
4e26f1074c [PATCH] include/ppc440.h minor error affecting interrupts
Fixed include/ppc440.c for UIC address Bug

Corrects bug affecting the addresses for the universal interrupt
controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.

Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29 12:03:57 +01:00
Stefan Roese
b690b7da0f Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git 2006-11-29 11:18:37 +01:00
Joakim Tjernlund
1939d96944 Make fsl-i2c not conflict with SOFT I2C
Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-29 00:25:26 -06:00
Joakim Tjernlund
14198bf768 Fix I2C master address initialization.
Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-29 00:25:23 -06:00
Kim Phillips
32081125a0 Merge http://www.denx.de/git/u-boot 2006-11-28 23:35:49 -06:00
Kim Phillips
cf3d045e51 Assign maintainers for mpc8349emds and mpc8360emds
Dave for mpc8360emds, and me for mpc8349emds.
2006-11-28 23:34:30 -06:00
Kim Phillips
1aa934c81b Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
since they are passed by reference to ucc_get_cmxucr_reg and assigned.
2006-11-28 23:34:30 -06:00
Timur Tabi
e857a5bdb3 mpc83xx: Miscellaneous code style fixes
Implement various code style fixes and similar changes.

Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-28 23:34:30 -06:00
roy zang
6bd87c0aee Solve the copyright conflicts when merging 'master' into hpc2.
Merge branch 'master' into hpc2

Conflicts:

	drivers/cfi_flash.c
2006-11-29 09:45:03 +08:00
Stefan Roese
e59581c56a [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.

Signed-off-by: Grant Likely <grant.likely@gmail.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-28 17:55:49 +01:00
Stefan Roese
e732faec95 [PATCH] PPC4xx: 440SP Rev. C detection added
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-28 16:09:24 +01:00
Stefan Roese
e7f3e9ff01 [PATCH] nand: Fix patch merge problem
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-28 11:05:49 +01:00
Stefan Roese
58e3b14c18 [PATCH] nand: Fix patch merge problem
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-28 11:04:45 +01:00
Wolfgang Denk
d2c83f5493 Merge with /home/sr/git/u-boot/denx-alpr-merge-test 2006-11-27 23:11:18 +01:00
Wolfgang Denk
4f4b602ec7 Update CHANGELOG 2006-11-27 22:53:53 +01:00
Wolfgang Denk
70864e6163 Merge with /home/sr/git/u-boot/4xx-enet 2006-11-27 22:50:25 +01:00
Wolfgang Denk
7de8354855 Merge with /home/sr/git/u-boot/nand-env 2006-11-27 22:49:46 +01:00
Wolfgang Denk
a5bfa2726b Merge with /home/sr/git/u-boot/nand-timeout 2006-11-27 22:49:11 +01:00
Wolfgang Denk
f7214cf9ea Merge with /home/sr/git/u-boot/denx-of 2006-11-27 22:46:10 +01:00
Stefan Roese
f6e495f54c [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
Patch below corrects the setting of the zmiifer register, it was
overwritting the register rather than ORing the settings.

Signed-off-by: Neil Wilson <NWilson@airspan.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:43:25 +01:00
Stefan Roese
d1a7254529 [PATCH] Select NAND embedded environment from board configuration
The current NAND Bootloader setup forces the environment
variables to be in line with the bootloader. This change
enables the configuration to be made in the board include
file instead so that it can be individually enabled.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:34:10 +01:00
Stefan Roese
1578486285 [PATCH] nand_wait() timeout fixes
Two fixes for the nand_wait() function in
drivers/nand/nand_base.c:

1. Use correct timeouts. The original timeouts in Linux
source are 400ms and 20ms not 40s and 20s

2. Return correct error value in case of timeout. 0 is
interpreted as OK.

Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 17:24:40 +01:00
Stefan Roese
da5553b095 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
arguments to bootm.  It removes the getenv("disable_of") test that used
to be used for this purpose.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-27 17:04:06 +01:00
Wolfgang Denk
83dc830b16 Merge with /home/mk/git/u-boot-generic_ohci#generic_ohci 2006-11-27 16:52:20 +01:00
Wolfgang Denk
d3c5e8b2f5 Merge with /home/wd/git/u-boot/master 2006-11-27 16:13:00 +01:00
Wolfgang Denk
a9398e0185 Minor code cleanup. Update CHANGELOG. 2006-11-27 15:32:42 +01:00
Stefan Roese
1729b92cde [PATCH] 4xx: Fix problem with board specific reset code (now for real)
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:52:04 +01:00
Stefan Roese
cc5ee8a92a [PATCH] alpr: remove unused board specific flash driver
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:49:51 +01:00
Stefan Roese
1f94d162e2 [PATCH] 4xx: Fix problem with board specific reset code
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:48:41 +01:00
Stefan Roese
ec0c2ec725 [PATCH] Remove testing 4xx enet PHY setup
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:46:06 +01:00
Stefan Roese
1c2ce22620 [PATCH] Update Prodrive ALPR board support (440GX)
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-27 14:12:17 +01:00
Stefan Roese
48c7d6dba9 Merge with /home/stefan/git/u-boot/denx 2006-11-27 14:11:22 +01:00
Wolfgang Denk
3b58d94590 Merge with /home/sr/git/u-boot/denx 2006-11-27 13:55:31 +01:00
Markus Klotzbuecher
58b4857766 Add a small README with information on the generic ohci driver. 2006-11-27 11:51:21 +01:00
Markus Klotzbuecher
ae3b770e4e Fix some endianness issues related to the generic ohci driver 2006-11-27 11:46:46 +01:00
Markus Klotzbuecher
7b59b3c7a8 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
to choose between the old and the generic OHCI drivers.
2006-11-27 11:44:58 +01:00
Markus Klotzbuecher
53e336e9ff Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
and adapted board configs TQM5200 and yosemite accordingly. This commit
also makes the maximum number of root hub ports configurable 
(CFG_USB_OHCI_MAX_ROOT_PORTS).
2006-11-27 11:43:09 +01:00
Wolfgang Denk
78d620ebb5 Updates for TQM5200 modules:
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
- simplify "udate" definitions
2006-11-23 22:58:58 +01:00
Stefan Roese
2053283304 [PATCH] PPC4xx start.S: Fix for processor errata
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
errata 1.12: 440_33 by moving patch up in code.

Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-22 13:20:50 +01:00
Stefan Roese
4ef6251403 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-20 20:39:52 +01:00
Wolfgang Denk
e4bbd8da16 Update CHANGELOG 2006-11-20 10:28:30 +01:00
Wolfgang Denk
fb934873d6 Merge with /home/sr/git/u-boot/cfi-update 2006-11-20 10:27:39 +01:00