Commit graph

55014 commits

Author SHA1 Message Date
Peng Fan
caceb739ea imx: build flash.bin for i.MX8
Build flash.bin for i.MX8 when SPL enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
b184a796a0 imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
Introduce BL33_BASE_ADDR, then we could reuse this script for i.MX8QXP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
8e0d963b19 dts: imx8qxp-mek: introduce u-boot dtsi
Introduce u-boot dtsi for i.MX8QXP MEK board.
we do not introduce a common dtsi for SoC, because different board
has different requirement on which needs to be enabled in SPL DM.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
f541796af9 spl: imx8: add spl boot device
Add spl_boot_device for i.MX8, also add BOOT_DEVICE_MMC2_2 for
spl_boot_mode.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
1610368234 gpio: introduce CONFIG_SPL_DM_PCA953X
Introduce CONFIG_SPL_DM_PCA953X for SPL usage.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
c1e0940f7c arm: imx: build mach-imx for i.MX8
To enable SPL for i.MX8, we could reuse code in arch/arm/mach-imx.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
04b249656e imx8: scu: use dedicated MU for SPL
SPL runs in EL3 mode, except MU0_A, others are not powered on,
and could not be used. However normal U-Boot use MU1_A, so we
could not reuse the one in dts. And we could not replace the one
in dts with MU0_A, because MU0_A is reserved in secure world.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
3bd888b55e imx8qxp: add SUPPORT_SPL option
Enable SUPPORT_SPL option for i.MX8QXP, then we could enable SPL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Fabio Estevam
73127e9099 MAINTAINERS: imx: Change Fabio's email address
I prefer to use my personal email address for U-Boot related work.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-28 20:35:47 +01:00
Stefan Agner
e0558a2cc0 configs: add default configuraiton for Colibri iMX7 with eMMC
Add a default configuration for Colibri iMX7D 1GB (with eMMC
NAND flash).

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-28 20:35:47 +01:00
Stefan Agner
a0411da993 configs: colibri_imx7: use distro defaults
The defconfig already use most features implied by distro defaults.
Make sure we enable all features required by distro boot by making
use of CONFIG_DISTRO_DEFAULTS.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-28 20:35:41 +01:00
Stefan Agner
4849f7def2 configs: colibri_imx7: use DFU for NAND instead of MMC
The colibri_imx7_defconfig is for Colibri iMX7 raw NAND devices.
Hence DFU for NAND is more useful then for MMC devices.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
edb411e2e6 configs: colibri_imx7: enable CAAM driver
Access to CAAM in non-secure mode must be enabled by the boot
loader first. The U-Boot CAAM driver enables access to CAAM in
non-secure mode by default. Hence enable the CAAM driver to
allow Linux accessing CAAM directly. This prevents error
messages like the following on Linux boot:
  caam 30900000.caam: Entropy delay = 3200
  caam 30900000.caam: failed to acquire DECO 0
  caam 30900000.caam: failed to instantiate RNG

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
72a1d11388 colibri_imx7: drop legacy usdhc support
Drop legacy pinmux/usdhc board configuration.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
22204f52c7 configs: colibri_imx7: use DM_MMC
Now that device tree is in place use DM_MMC for Colibri iMX7
devices.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
b6fd4fccb4 arm: dts: imx7: colibri: add usdhci peripherals to device tree
Add usdhci peripherals to device tree. This allows to use DM_MMC
for Colibri iMX7 devices.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
afca5841fc configs: colibri_imx7: use separate device tree
Use OF_SEPARATE as suggested by the build system.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
23f61b81d8 configs: colibri_imx7: enable DM for raw NAND devices
Use DM and device trees for raw NAND devices by default. This
fixes -74 NAND read errors since it makes sure the ECC settings
are the same as used in Linux and our downstream U-Boot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
d8a32f52a6 arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices
In preparation of adding CONFIG_DM_MMC support use separate device
trees for raw NAND and eMMC devices.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:08 +01:00
Stefan Agner
2bc18ce570 colibri_imx7: fix boot commands
Fix mixed up boot commands between raw NAND and eMMC variant. Also
make sure that the boot_file is defined for the eMMC boot command.

Fixes: a62c60610f ("colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support")
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-28 13:02:07 +01:00
Fabio Estevam
9ec1791e6a Revert "tools: imx8image: set dcd_skip to true"
This reverts commit f7e475db40.

This commit breaks the boot on imx8qxp evk and it should only
be re-applied after imx8qxp evk is converted to SPL.

Revert it for now, so that imx8qxp evk can be functional.

Reported-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
2019-01-28 12:59:03 +01:00
Heinrich Schuchardt
eb7f908a16 tools: imx8image: use correct printf escape sequence
core is of type uint64_t. So for printing we need "%"PRIu64 (not "%lu").

Without the patch a warning is issued when building on a 32bit system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-01-28 12:55:14 +01:00
Olaf Mandel
88b5002b34 m53menlo: fix addmtd cmd in default environment
The original definition added the string mtdparts= to the Linux Kernel
args twice: mtdparts=mtdparts=. Fix that.

Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-01-28 12:54:30 +01:00
Olaf Mandel
de5def1cf5 m53menlo: fix splashfile location
After merging the boot partition into the root partition, the splashfile
resides in the /boot subdirectory: update the default environment to
reflect that.

Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-01-28 12:54:15 +01:00
Fabio Estevam
9e3c0174da pico-imx7d: Add LCD support
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-01-28 12:53:48 +01:00
Fabio Estevam
bab289cbe9 mx7: Do not call lcdif_power_down() in the SPL case
Like it was done on imx6 in commit 9236269de5 ("imx: mx6: Fix
implementantion reset_misc")

Do not call lcdif_power_down() in the SPL case to fix the following
build error:

  LD      spl/u-boot-spl
  MKIMAGE u-boot.img
arch/arm/mach-imx/built-in.o: In function `reset_misc':
/home/fabio/ossystems/u-boot/arch/arm/mach-imx/mx7/soc.c:372: undefined reference to `lcdif_power_down'
scripts/Makefile.spl:375: recipe for target 'spl/u-boot-spl' failed

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 12:53:21 +01:00
Martyn Welch
0963060c99 imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on
the PHYTEC phyCORE-i.MX6UL SOM (PCL063).

CPU:   Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 44C
Reset cause: POR
Board: PHYTEC phyCORE-i.MX6UL
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC0

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART (1 & 5)
 - USB (host & otg)

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2019-01-28 12:47:27 +01:00
Martyn Welch
774ec60b74 Enable FEC driver to retrieve PHY address from device tree
Currently if we have more than one phy on the MDIO bus, we do not have a
good mechanism for determining which should be used at runtime. Enable the
FEC driver to determine the address for the PHY from the device tree.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-28 12:47:15 +01:00
Breno Matheus Lima
b2ca8907d9 imx: hab: Convert non-NULL IVT DCD pointer warning to an error
The following NXP application notes and manual recommend to ensure the
IVT DCD pointer is Null prior to calling HAB API authenticate_image()
function:

- AN12263: HABv4 RVT Guidelines and Recommendations
- AN4581: Secure Boot on i.MX50, i.MX53, i.MX 6 and i.MX7 Series using
  HABv4
- CST docs: High Assurance Boot Version 4 Application Programming
  Interface Reference Manual

Commit ca89df7dd4 ("imx: hab: Convert DCD non-NULL error to warning")
converted DCD non-NULL error to warning due to the lack of documentation
at the time of first patch submission. We have warned U-Boot users since
v2018.03, and it makes sense now to follow the NXP recommendation to
ensure the IVT DCD pointer is Null.

DCD commands should only be present in the initial boot image loaded by
the SoC ROM. Starting in HAB v4.3.7 the HAB code  will generate an error
if a DCD pointer is present in an image being authenticated by calling the
HAB RVT API. Older versions of HAB will process and run DCD if it is
present, and this could lead to an incorrect authentication boot flow.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-01-28 12:45:45 +01:00
Tom Rini
2f41ade79e linker: Modify linker scripts to be more generic
Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than
CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE.  This lets us re-use the
same script for both SPL and TPL.  Add logic to scripts/Makefile.spl to
pass in the right value when preprocessing the script.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26 22:55:53 -05:00
Tom Rini
b32ba6f12e rockchip: Add TPL_MAX_SIZE for RK3288
Per Kever Yang, 32768 is a reasonable max size for TPL on RK3288.

Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-01-26 22:55:53 -05:00
Tom Rini
a6d6812a21 PowerPC: Stop re-using CONFIG_SPL_TEXT_BASE for TPL
Rather than checking for CONFIG_TPL_BUILD and then re-defining
CONFIG_SPL_TEXT_BASE make use of CONFIG_TPL_TEXT_BASE directly.

Cc: York Sun <york.sun@nxp.com>
Cc: Po Liu <po.liu@nxp.com>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Timur Tabi <timur@tabi.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26 22:55:53 -05:00
Tom Rini
0da9025508 Merge branch '2019-01-25-master-imports'
- snapdragon 820c improvements
- poplar updates
- DFU + SPL cleanups
- Improve the mediatek mmc driver
- Other minor cleanups / improvements
2019-01-26 22:47:55 -05:00
Heinrich Schuchardt
320194ae35 hashtable: remove caps buffer
slre_match() checks if caps == NULL. In this case it does not try to
update it. So there is no need to create a buffer caps which we do not
evaluate.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-01-26 08:13:58 -05:00
Simon Goldschmidt
e35d2a7553 lib: lmb: cleanup var names and patman warnings
Change multiple usages of 'j' into 'rgn'; fix whitespace/coding style
reported by patman.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26 08:13:57 -05:00
Simon Goldschmidt
65304aade8 lib: lmb: rename lmb_get_unreserved_size to lmb_get_free_size
As a follow-up, change the name of the newly introduced function
'lmb_get_unreserved_size' to 'lmb_get_free_size', which is more
appropriate.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fix test/lib/lmb.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26 08:13:57 -05:00
Philippe Reynes
eba0c26f07 bcm968380gerg: disable SPI_FLASH
The board bcm968380gerg don't have a spi flash so
we disable the spi flash support.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-01-26 08:13:57 -05:00
Patrick Delaunay
67eea68a34 MAINTAINERS: update stm32mp1 path for arch
Handle correctly directory arch/arm/mach-stm32mp/ :
Add a trailing slash to include all files
and subdirectory files.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-01-26 08:13:57 -05:00
Michal Simek
e38cef9f6e misc: i2c_eeprom: Add atmel,24c08 to the list
Linux kernel binding is using atmel,24c08 compatible string. On the
other hand there is atmel,24c08a which is not listed in the kernel.
Add compatible string without "a" suffix to be compatible with Linux
kernel binding.

These eeproms are available on several ZynqMP development boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-01-26 08:13:57 -05:00
Simon Goldschmidt
e4478d9ac8 tests: dtoc: adapt tests to changed dtoc output
The dtoc tests need to be adapted to dtoc being changed to output platdata
structs as const, which has been introduced in commit 7d05d3a8e3 ("dtoc:
make generated platdata structs const").

Fixes: 7d05d3a8e3 ("dtoc: make generated platdata structs const")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2019-01-26 08:13:56 -05:00
Greg Czerniak
b8fea5e8dd atmel: add CMD_FS_GENERIC to SAMA5D3 for EFI boot
I'm working on getting OpenBSD to run on the Atmel SAMA5D3 Xplained.
OpenBSD uses an EFI bootloader, which requires the "load" command to
work, since "fatload" doesn't initialize the EFI memory addresses
properly. To get "load" on the SAMA5D3 version of U-Boot, I propose
adding the CONFIG_CMD_FS_GENERIC option.

Signed-off-by: Greg Czerniak <greg@czerniak.info>
2019-01-26 08:13:56 -05:00
Angelo Dureghello
1f15cb8f5b drivers: esdhc: add support for ColdFire mcf5441x family
This patch has been tested on the mcf54415-based stmark2
board. The eSDHC driver works reliably using DMA mode.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-01-26 08:13:56 -05:00
Sam Protsenko
293a172b67 env: Fix saving environment to "bad CRC" location
In case when the environment on some location is malformed (CRC isn't
matching), there is a chance we won't be able to save the environment to
that location. For example, consider the case when we only have the
environment on eMMC, but it's zeroed out. In that case, we won't be able
to "env save" to it, because of "bad CRC" error. That's happening
because in env_load() function we consider malformed environment as
incorrect one, and  defaulting to the location with highest (0)
priority, which can be different from one we are dealing with right now
(e.g., highest priority can be ENV_FAT on SD card, which is not
inserted, but we want to use ENV_MMC on eMMC, where we were booted
from).

This issue began to reproduce after commit d30ba2315a ("u-boot: remove
driver lookup loop from env_save()") on BeagleBone Black, but that
commit didn't introduce the wrong logic, it just changed the behavior
for default location to use, merely revealing this issue.

To fix that, let's implement next logic in env_load():
  1. Try to find out correct environment; if found -- use it
  2. If working environment wasn't found, but we found malformed one
     (with bad CRC), let's use it for further "env save". But make sure
     to use malformed environment location with highest priority.
  3. If neither correct nor malformed environment was found, let's
     default to environment location with highest priority (0)

Steps to reproduce mentioned issue on BeagleBone Black (fixed in this
patch):

1. Boot from SD card and erase eMMC in U-Boot shell:
   => mmc dev 1
   => mmc erase 0 100000
   => gpt write mmc 1 $partitions
2. Write new SPL and U-Boot to eMMC; the rest of eMMC will stay filled
   with zeroes
3. Boot from eMMC; try to do:
   => env save
4. Observe the error (incorrect behavior). Correct behavior: environment
   should be stored correctly on eMMC, in spite of it has "bad CRC"

Fixes: d30ba2315a ("u-boot: remove driver lookup loop from env_save()")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26 08:13:56 -05:00
Sam Protsenko
49d04c589c env: common: Return specific error code on bad CRC
Callers of env_import*() functions might want to check the case when we
have incorrect environment (with bad CRC). For example, when environment
location is being defined in env_load(), call chain may look like this:

    env_load() -> drv->load() = env_mmc_load() -> env_import()

Return code will be passed from env_import() all way up to env_load().
Right now both env_mmc_load() and env_import() return -EIO error code,
so env_load() can't differentiate between two cases:
  1. Driver reports the error, because device is not accessible
  2. Device is actually accessible, but environment is broken

Let's return -ENOMSG in env_import(), so we can distinguish two cases
mentioned above. It will make it possible to continue working with "bad
CRC" environment (like doing "env save"), instead of considering it not
functional (implemented in subsequent patch).

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26 08:13:56 -05:00
Marcin Niestroj
f68bc629f4 ARM: chiliboard: enable DM_SPI
Add DM_SPI to suppress build warning about dm conversion.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2019-01-26 08:13:55 -05:00
Robert P. J. Day
c1180aa254 Makefile: have "make distclean" remove CHANGELOG
Ensure that "make distclean" deletes an existing CHANGELOG file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2019-01-26 08:13:55 -05:00
Andrew F. Davis
0fd1359c5a ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Like AM33xx and AM43xx, DRA7xx and AM57xx devices may need to
have an non-standard boot address in memory. This may be due
to the device being a high security variant, which place the
Initial SoftWare (ISW) after certificates and secure software.

Allow these devices to set this from Kconfig.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-01-26 08:13:55 -05:00
Andrew F. Davis
2dd468dbe1 dfu: Remove dependency on HUSH parser in SPL
CLI support with the HUSH parser is not currently SPL safe due to it's
use of realloc. That function is not defined for SPLs that use
SYS_MALLOC_SIMPLE. CLI support can be built in to SPL and some functions
do work, but use of some like run_command() will cause build to fail.
When no SPL code calls this function build works as the compiler removes
this unreachable code so the unresolved symbols are ignored.

If DFU support is enabled in SPL then MMU DFU support may get brought in
also, this code does make a call to run_command() causing build to fail
if the HUSH parser is not built-in. To break this odd and unneeded
dependency chain we use CONFIG_IS_ENABLED where appropriate to prevent
calls into HUSH code from SPL. This also removes our need to pull in the
rather unrelated source file when SPL_DFU is defined.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-26 08:13:55 -05:00
Andrew F. Davis
2d59ec8482 dfu: Make DFU support more SPL friendly
Do this by using $(SPL_) in Makefiles and CONFIG_IS_ENABLED in C code.
This ensures the files and features are only built into the right build
for which they are enabled. Using the macros to simplify this patch was
made possible by the config symbol rename done in the last patch.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-26 08:13:55 -05:00
Andrew F. Davis
6536ca4d66 spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same
meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT
to allow for cleaner use in code.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-26 08:13:54 -05:00