Commit graph

21 commits

Author SHA1 Message Date
Patrick Delaunay
3ac6cae944 configs: stm32mp13: activate command stm32prog
Activate the command stm32prog with CONFIG_CMD_STM32MPROG.
The CONFIG_SET_DFU_ALT_INFO is also activated to support
the required weak functions for the DFU virtual backen defined in
board/st/common/stm32mp_dfu.c.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:32:41 +02:00
Patrice Chotard
e64e7331c2 configs: stm32mp13: Enable USB related flags
Enable USB related flags.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:32:41 +02:00
Gatien Chevallier
81a751dcd9 configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms
Default embed this configuration. If OP-TEE PTA RNG is exposed, it means
that the RNG is managed by the secure world. Therefore, the RNG node
should be disabled in the device tree as an access would be denied
by the hardware firewall.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:03 +02:00
Tom Rini
ba6d575ee0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:35:27 -04:00
Patrick Delaunay
2df7fc0824 configs: stm32mp1: reduce DDR_CACHEABLE_SIZE to supported 256MB DDR
Reduces the CONFIG_DDR_CACHEABLE_SIZE, the size of DDR mapped cacheable
before relocation, to support DDR with only 256MB because the OP-TEE
reserved memory is located at end of the DDR.

By default the new size of 128MB cacheable memory is enough
in dram_bank_mmu_setup() for early_enable_caches() in arch_cpu_init()
and is correct for DDR size = 256MB.

After relocation the real size of DDR, excluding the no-map reserved
memory, is used after the U-Boot device tree parsing.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:16:31 +02:00
Patrice Chotard
df197e2aa0 configs: stm32mp1: disable CMD_MTDPARTS
Disable CMD_MTDPARTS as it's no more needed and it is strongly
encouraged to avoid using this command anymore.
(see comments in ./cmd/Kconfig:2422).

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Patrick Delaunay
8a8efacf5f board: stm32mp1: use fdt_copy_fixed_partitions
Copy the fixed partition nodes from U-Boot device tree to Linux kernel
device tree to dynamically configure the MTD partitions.

fdt_copy_fixed_partitions is only based on device tree
and replace the function fdt_fixup_mtdparts based on mtdparts variable;
the variable mtdid and mtdparts are not more required.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Patrice Chotard
6cf8888541 configs: stm32mp: Disable SYS_MTDPARTS_RUNTIME for stm32mp15 and stm32mp13
As we don't use anymore MTDPARTS_xx Kconfig variables
(MTDPARTS_NAND0_BOOT, MTDPARTS_NOR0_BOOT...),
disable SYS_MTDPARTS_RUNTIME.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16 11:01:16 +02:00
Tom Rini
c358af81d0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-27 13:39:17 -04:00
Tom Rini
fcb5117da8 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17 09:58:06 -05:00
Patrick Delaunay
d3a87e32dd configs: stm32mp13: Activate command stm32key
Activate the command stm32key with CONFIG_CMD_STM32KEY.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-12 16:37:13 +01:00
Patrick Delaunay
7de0d10ca7 configs: stm32mp13: Activate CONFIG_CMD_FUSE
Activate the command fuse to access on STM32MP13x OTP with
the BSEC driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-12 16:37:13 +01:00
Patrick Delaunay
0902bcdbb3 configs: stm32mp: activate CONFIG_ENV_MMC_USE_DT
Activate by default CONFIG_ENV_MMC_USE_DT as "u-boot,mmc-env-partition"
should be always use in STMicroelectronics boards device tree to locate
the environment for mmc backend. The 2 defines:
  CONFIG_ENV_OFFSET=0x280000
  CONFIG_ENV_OFFSET_REDUND=0x2C0000
are only valid for spi-nor and not for SD-Card or eMMC.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-10 12:37:09 -05:00
Tom Rini
d219fc06b3 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-16 16:06:46 -04:00
Tom Rini
1247c35c80 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23 15:24:14 -04:00
Patrick Delaunay
257d001cb5 configs: stm32mp13: activate some command
Activate useful commands in STM32MP13x config, already activated in
stm32mp15_defconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12 11:48:15 +02:00
Patrick Delaunay
33129f6130 configs: stm32mp13: activate I2C support
Activate the I2C driver in STM32MP13x config.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12 11:48:15 +02:00
Patrick Delaunay
420f37a91f configs: stm32mp13: activate RTC support
Activate the RTC driver in STM32MP13x config.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12 11:48:15 +02:00
Patrick Delaunay
72d7a302f6 configs: stm32mp13: activate RNG support
Activate the RNG driver provided by OP-TEE.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-12 11:48:15 +02:00
Tom Rini
c45568cc4e Convert CONFIG_SYS_BOOTM_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Patrick Delaunay
11517ccc8c configs: add stm32mp13 defconfig
Add a initial config for STM32M13x SOC family, using the stm32mp135f-dk
device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-17 10:41:16 +02:00