Commit graph

15071 commits

Author SHA1 Message Date
Pali Rohár
767ecc5f9f Nokia RX-51: Remove CONFIG_UBI_SIZE
CONFIG_UBI_SIZE option is not used, so remove it.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-10-12 11:11:58 -04:00
Ignacio Zamora
34803205eb Fix typo in CONFIG_USBNET_DEVADDR
Fix typo that was caused by the same feature being split in to 2 different
configuration options. Replace CONFIG_USBNET_DEVADDR with
CONFIG_USBNET_DEV_ADDR

Signed-off-by: Ignacio Zamora <nachopitt@gmail.com>
2022-10-12 11:11:19 -04:00
Jim Liu
9ca71c9c19 arm: nuvoton: Add support for Nuvoton NPCM845 BMC
Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-10-06 21:05:17 -04:00
Holger Brunck
88383fd864 board/km: remove kirkwood boards
These boards are out of maintenance and can be removed.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-10-06 10:13:38 +02:00
Simon Glass
f3543e6944 treewide: Drop image_header_t typedef
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-29 16:07:57 -04:00
Tom Rini
01c88e3dcd - Increase SYS_MALLOC_F_LEN for STM32 MCU's board
- SPL fixes for STM32F7 MCUs
 - Device tree alignement with kernelv6.0-rc4 for MCU's board
 - Device tree alignement with kernelv6.0-rc3 for MPU's board
 - Update DDR node for STM32MP15
 - Cleanup config file for STM32MP1
 - Update for cmd_stm32key command
 - Fix compatible string to add partitions for STM32MP1
 - Update for stm32programmer tool
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmMy5KMcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/phGoEACO/DdR5qrZcWYZhK8t
 4ZhCYW3+anI7hx/aOx2k36JIw8V7kTCivBszTXtvEFLoPARKSt2RCGKRrSciyPw8
 e5HaX85fvOum1+p555LzGBerleezz3dMIE6PgjuWHQgznVh5jaJPvu5SacOoU2yt
 RCQbrBUqMxZ9HPFWOWsmqBo5rIskgn0fhkSDaqj+v0yqnj/HLZk5NtAy4q3KYxA1
 yL4rHB5+SM7ENh1KsPJm+8M5FTjBmVBZKp17mcu/3z3RwNNCjEVG0aXw8Im7pzb8
 b0pwnOqxRMBsBNOqnZ6kmNdKeOBZVfh35dBXplUxfMG6VYWwrNUTAgLnwPIFbFWX
 qaMiyRdAK5KArOCWFzbJN8oqCrM7hrTnlpmK9ilILJ81VuN/JDvFmLle31DrOxm6
 XzVh8GOp+cjEmJckcm8ChAUGB/Q1ToTZd6TMXN69IzcmE0t0rW/j+muILVeq+rT5
 JmWz+5av9W1nKRVP9WzfjOVASNdNgNRQMYAn8jJwUU/oiEw6QIZUP4m5rngSNMzQ
 f3Jzl+zO7QfFtT4NHir1HNguJRnZxuzxBc3Ok639UwzMJQwHuy6LPJnAlKLUoYuE
 LYkplLn7UA8aSbiWJq04fws0xrTYMvK1VWZp5CFgsnsc2usLy4Sks9JIwyqmAxme
 dF0ut2NYT3o8Ctn9ppezA+sx2w==
 =iA80
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220927' of https://source.denx.de/u-boot/custodians/u-boot-stm into next

- Increase SYS_MALLOC_F_LEN for STM32 MCU's board
- SPL fixes for STM32F7 MCUs
- Device tree alignement with kernelv6.0-rc4 for MCU's board
- Device tree alignement with kernelv6.0-rc3 for MPU's board
- Update DDR node for STM32MP15
- Cleanup config file for STM32MP1
- Update for cmd_stm32key command
- Fix compatible string to add partitions for STM32MP1
- Update for stm32programmer tool
2022-09-27 08:53:51 -04:00
Tom Rini
55ccdee315 Xilinx changes for v2023.01-rc1 (round 2)
xilinx:
 - Add support for new Versal NET SOC
 
 zynqmp:
 - Use mdio bus for ethernet phy description
 - Wire ethernet phy reset via i2c-gpio
 
 versal:
 - Config cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYzGwogAKCRDKSWXLKUoM
 Ial4AJ9+4WHn0MV2X7gK1fyh4lUW7ggPhQCggsYlSoACgMgdji17SAPhCv/W3IA=
 =BmA9
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc1-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.01-rc1 (round 2)

xilinx:
- Add support for new Versal NET SOC

zynqmp:
- Use mdio bus for ethernet phy description
- Wire ethernet phy reset via i2c-gpio

versal:
- Config cleanup
2022-09-26 11:28:14 -04:00
Patrice Chotard
2b5dee9485 configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag
By pressing "c" key during SPL execution, we force U-boot execution
instead of a kernel XIP image.

This fixes a hard fault when booting stm32f746-disco in SPL with "c"
key pressed during SPL execution.

U-Boot SPL 2022.10-rc5-00009-g40d02baa91 (Sep 20 2022 - 17:21:21 +0200)
Trying to boot from XIP
Hard fault
pc : 080083fc    lr : 08000d1b    xPSR : 21000000
r12 : 2004f108   r3 : 080083fd    r2 : 00000028
r1 : 2004f0c8    r0 : 2004f0e4
Resetting CPU ...

This is due to SYS_UBOOT_START flag set to 0x080083FD which is not correct.
If unset, SYS_UBOOT_START is set by default to CONFIG_SYS_TEXT_BASE
which match with our requirement.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
2022-09-26 17:21:09 +02:00
Michal Simek
f2641f066b arm64: versal-net: Add support for mini configuration
Versal NET mini configuration is designed for running memory test. Current
output is on DCC but changing serial0 alias to pl011 will move console to
serial port.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/aec3f41a4cc48c45b8f07dd6e423d5838dbcc9d7.1663589964.git.michal.simek@amd.com
2022-09-26 14:23:30 +02:00
Michal Simek
ce40cbdf1f arm64: versal-net: Add defconfig for Versal NET
Use one defconfig for supporting multiple different platforms. DTB
reselection is enabled to choose DT based on SOC detection.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/82cc7c1ca8850270cc2ebc992d835a37aa3d236f.1663589964.git.michal.simek@amd.com
2022-09-26 14:23:29 +02:00
Michal Simek
f6aebdf676 arm64: versal-net: Add support for Versal NET platform
Versal NET platform is based on Versal chip which is reusing a lot of IPs.
For more information about new IPs please take a look at DT which describe
currently supported devices.
The patch is adding architecture and board support with soc detection
algorithm. Generic setting should be very similar to Versal but it will
likely diverge in longer run.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-26 14:23:29 +02:00
Weijie Gao
e053ccf6ef board: mediatek: add MT7981 reference boards
This patch adds general board files based on MT7981 SoCs.

MT7981 uses one mmc controller for booting from both SD and eMMC, and the
pins of mmc controller are also shared with spi controller.
So three configs are need for these boot types:

1. mt7981_rfb_defconfig - SPI-NOR and SPI-NAND
2. mt7981_emmc_rfb_defconfig - eMMC only
3. mt7981_sd_rfb_defconfig - SD only

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-23 15:09:15 -04:00
Weijie Gao
389ba6986b board: mediatek: add MT7986 reference boards
Add general board files based on MT7986 SoCs.

MT7986 uses one mmc controller for booting from both SD and eMMC.
Both MT7986A and MT7986B use the same pins for spi controller.

Configs for various boot types:
1. mt7986_rfb_defconfig - SPI-NOR and SPI-NAND for MT7986A/B
2. mt7986a_bpir3_emmc_defconfig - eMMC for MT7986A only
3. mt7986a_bpir3_sd_defconfig - SD for MT7986A only

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-09-23 15:09:15 -04:00
Patrick Delaunay
86d5a06ae3 configs: stm32mp1: cleanup config file
Remove the unnecessary comment after the CONFIG_SYS_BOOTM_LEN
migration to Kconfig.

Fixes: c45568cc4e ("Convert CONFIG_SYS_BOOTM_LEN to Kconfig")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-09-23 14:32:51 +02:00
Michal Simek
0fb7fd865b xilinx: versal: Remove unused comments from xilinx_versal.h
Couple of options have been moved to Kconfig but comments stayed in header
that's why remove them.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ffaee826dcb6853825ac72db91bb3a682c42297d.1663575411.git.michal.simek@amd.com
2022-09-21 09:54:39 +02:00
Tom Rini
e9a1ff9724 Merge branch 'master' into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 16:07:12 -04:00
Michael Trimarchi
cc74cab86a bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.

Add support for imx6ulz BSH SMM M2 board:

- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:18 +02:00
Angus Ainslie
466a9ea2a1 board: purism: add the Purism Librem5 phone
Initial commit of Librem5 u-boot and SPL

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:10 +02:00
Marcel Ziswiler
bbe0089d29 verdin-imx8mm: verdin-imx8mp: update env memory layout
Update the distro config env memory layout for the Verdin iMX8M Mini and
Verdin iMX8M Plus:

- loadaddr=0x48280000 allows for 128.5MB area for uncompressing (ie FIT
  images, kernel_comp_addr_r, kernel_comp_size)
- fdt_addr_r = loadaddr + 127.5MB : allows for 127.5MB kernel
- scriptaddr = fdt_addr_r + 512KB : allows for 512KB fdt
- ramdisk_addr_r = scriptaddr + 512KB : allows for 512KB script

Memory layout taken from commit fd5c7173ad
("imx8m{m,n}_venice: update env memory layout") but moved loadaddr by an
additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000"
during booti plus actually defining kernel_comp_size to make booti work.

Note that for our regular BSP Layers and Reference Images for Yocto
Project an updated distro boot script is required (see
meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-09-18 22:56:10 +02:00
Marek Vasut
7b90229eba ARM: imx: dh-imx6: Increase SF erase area for u-boot update
Erase the entire U-Boot area during U-Boot update instead of just
a subset of it. This way, in case u-boot-with-spl.imx grows, the
sf write won't write over non-erased part of the SPI NOR.

Signed-off-by: Marek Vasut <marex@denx.de>
2022-09-18 22:56:10 +02:00
Jesse Taube
f7aad713c5 ARM: imxrt1170_defconfig: Add i.MXRT1170 defconfig
Add a base defconfig for the i.MXRT1170

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-09-18 20:42:56 +02:00
Bernhard Messerklinger
c79c0b4692 brppt1: Update environment to support new boot concept
* Drop legacy /boot/PPTImage.md5 check
* Update device tree naming
* Update t30args#0 root cmd line property to support latest kernel
  versions (root=/dev/mmcblk0p2 for linux < 4 and
  root=/dev/mmcblk1p2 for linux >= 4)
* Add custom bootloader version string
* Destroy invalid dtb at ${dtbaddr} and configuration script at
  ${cfgaddr} to ensure proper boot in warm restart case.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-09-15 14:22:08 -04:00
Bernhard Messerklinger
0daeadbbd2 include: configs: brppt1: Fix commit 0ea4fc4dcf
Commit 0ea4fc4dcf ("board/BuR: invalidate ${dtbaddr} before cfgscr")
destroys the boot targets b_t30lgcy#0 and b_t30lgcy#1. The reason behind
this is, that b_t30lgcy#0 and b_t30lgcy#1 both load the for booting
needed device trees from mmc and the cfgscr script patches those. Because
of this, cfgscr is not allowed to destroy the previously loaded device
tree otherwise cfgscr will fail.
This patch moves the device trees invalidation on warm restart to the
PREBOOT cmd to fix that issue.

Fixes: 0ea4fc4dcf ("board/BuR: invalidate ${dtbaddr} before cfgscr")
Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-09-15 14:22:08 -04:00
Bernhard Messerklinger
6dfc1f4c51 brppt1: Remove unused board variants
The SPI and NAND board variants never went into production.
Drop those board variants.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2022-09-15 14:22:08 -04:00
Ovidiu Panait
3a6948ce71 microblaze: drop CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE
These macros are not used anymore in microblaze code since commit
f113d7d303 ("Convert CONFIG_SPL_STACK to Kconfig"), so remove them.

Fixes: f113d7d303 ("Convert CONFIG_SPL_STACK to Kconfig")
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220829170205.1274484-1-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-09-13 11:32:48 +02:00
Pali Rohár
64c422b14f arm: mvebu: turris_mox: Add support for distroboot $fdt_addr
$fdt_addr is mandatory for systems which provides DTB in HW (e.g. ROM) and
wishes to pass that DTB to Linux.

Turris Mox contains DTB binary in SPI NOR memory at "dtb" partition which
starts at offset 0x7f0000 and is 0x10000 bytes long.

Armada 3700 CPU does not allow mapping SPI NOR memory into physical address
space like on other architectures and therefore set $fdt_addr variable to
memory range in RAM and loads this DTB binary from SPI NOR in misc_init_r()
function.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-09-13 06:38:08 +02:00
Tom Rini
e9de8c8c64 - simplify the STM32MP15x package parsing code
- remove test on CONFIG_DM_REGULATOR in stm32mp1 board
   and enable CONFIG_DM_REGULATOR for stm32f769-disco
 - handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start'
   after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>)
 - Fix SYS_HZ_CLOCK value for stih410-b2260 board
 - Switch STMM32MP15x DHSOM to FMC2 EBI driver
 - Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmMZoW4ACgkQ4rK92eCq
 k3W2MAgAsmy2aSlMYo/AGlJ/KCrZuk6OirNHtdOdacvbcdUUbpkNpBSjdkrRm2If
 VUnY1utIIJe6gFgnBUxXJ3RF5FZuhkdawc6V25HtDp6H3WamzJknKs5Vc4TlKp59
 hZCOto7/+G/cd2XLdCKFUBl+new1pdDPsEm56+57DeZ7QGAQRX35PUQ5+HBjQJ/N
 n/wJgS6wkEdIQLLwmCVxbHUkC+pRotTza5F2A0qZJgYPMcMpVFYKtzIa4GbWB5YS
 MKGHbM8f3C8RLPQaHHTRycoA2Yor1I52B4Oi7605c5zHQr9pjrgtWsernDzkIhsB
 ThYHSYQBUBTY4HBfzFwzCkVGqqLWNg==
 =PMFY
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20220907' of https://source.denx.de/u-boot/custodians/u-boot-stm

- simplify the STM32MP15x package parsing code
- remove test on CONFIG_DM_REGULATOR in stm32mp1 board
  and enable CONFIG_DM_REGULATOR for stm32f769-disco
- handle ck_usbo_48m clock provided by USBPHYC to fix the command 'usb start'
  after alignment with Linux kernel v5.19 DT (clocks = <&usbphyc>)
- Fix SYS_HZ_CLOCK value for stih410-b2260 board
- Switch STMM32MP15x DHSOM to FMC2 EBI driver
- Remove hwlocks from pinctrl in STM32MP15x to avoid issue with kernel
2022-09-08 08:33:41 -04:00
Pali Rohár
33043b396c board: freescale: p1_p2_rdb_pc: Calculate offsets for eSDHC boot sector
Correctly calculate offsets between SPL and proper U-Boot when new config
option CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR for generating eSDHC boot sector
is enabled. Otherwise SPL would not be able to boot proper U-Boot.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-07 11:47:30 +08:00
Pali Rohár
61fed3155f board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot
All *boot env commands overrides default boot source location via i2c.
After board reset without power off, BootROM then starts booting U-Boot
from this specified location instead of the default one.

Add new env command defboot which reverts boot location to the default
value, which in most cases is configurable by HW DIP switches.

And add new env commands norlowerboot, norupperboot, sd2boot to boot from
other locations. norlowerboot would instruct BootROM to boot from lower NOR
bank, norupperboot from upper NOR bank and sd2boot from SD card with
alternative configuration.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-07 11:45:48 +08:00
Patrice Chotard
29e03c98cf configs: stih410-b2260: Fix SYS_HZ_CLOCK value
SYS_HZ_CLOCK was wrongly set to 1GHz whereas it's set to 750MHz
by default by bootrom.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Grzegorz Szymaszek <gszymaszek@short.pl>
2022-09-06 14:09:45 +02:00
Michael Walle
a8713c29b5 board: sl28: remove COUNTER_FREQUENCY_REAL
The frequency of the system counter is static which is given by the
COUNTER_FREQUENCY option. Remove COUNTER_FREQUENCY_REAL.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-09-06 09:10:41 +08:00
Philip Oberfichtner
111688839a Convert CONFIG_SYS_L2_PL310 to Kconfig
This converts CONFIG_SYS_L2_PL310 to Kconfig.

For omap2 and mvebu the 'select SYS_L2_PL310' locations were
determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310.

For mx6 I manually chose ARCH_MX6 as 'select' location. The
correctness has been verified using

	$ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF
	0 matches

That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this
was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert
the 'select' statement under ARCH_MX6.

Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-09-01 17:18:42 -04:00
Tom Rini
12bbcd6a85 Remove CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS et al
This removes the following symbols:
   CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS
   CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS
   CONFIG_SYS_I2C_LDI_ADDR
   CONFIG_SYS_I2C_DVI_ADDR
   CONFIG_SYS_I2C_DVI_BUS_NUM

They are unused by any code in tree at this time.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-01 17:18:42 -04:00
Tom Rini
adf13bcc40 Convert CONFIG_SYS_I2C_EEPROM_CCID et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_EEPROM_CCID
   CONFIG_SYS_I2C_EEPROM_NXID
   CONFIG_SYS_EEPROM_BUS_NUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-01 17:18:42 -04:00
Tom Rini
fdffe6aae2 corenet_ds.h: Remove
This was missed when removing the platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-31 12:21:47 -04:00
Michael Walle
cb75d02ab1 board: lsxl: convert to DM_ETH
Just enabling the Kconfig option for DM_ETH and DM_MDIO is enough.
Additionally, we can remove the old hardcoded config.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:11 +02:00
Michael Walle
aa088beac3 board: lsxl: make last resort recovery more reliable
If something is wrong with the environment, we cannot rely on a proper
u-boot operation anymore. In fact, it is possible, that we never reach
misc_init_r() with a broken environment.

Also don't enable the netconsole by environment settings. This way the
user don't have to reconfigure the environment. Instead the network
console is only enabled when the push button is pressed during boot.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:40:00 +02:00
Michael Walle
f5631b2c84 board: lsxl: use proper *_r variables
Use the common kernel_addr_r, ramdisk_addr_r and fdt_addr_r variable
names.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:49 +02:00
Michael Walle
148b3aef9a board: lsxl: reorder image loading and remove ramdisk_len
We can load the ramdisk as the last step. This way we don't have to set
the intermediate variable 'ramdisk_len' and can remove it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:45 +02:00
Michael Walle
111e1e110b board: lsxl: use CONFIG_DEFAULT_FDT_FILE
Drop our own CONFIG_FDTFILE handling in favor of the generic
CONFIG_DEFAULT_FDT_FILE one.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:41 +02:00
Michael Walle
857065403a board: lsxl: remove eraseenv script
This is not needed. The user can do a "env default -f -a".

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:39:22 +02:00
Tony Dinh
7875f8019c arm: kirkwood: nsa310s: Add Distro boot capability
- Add distro boot to board include file and deconfig file
- Miscellaneous changes:
	- Remove Gerald from maintainer list (email bounced)
	- Add CONFIG_SUPPORT_PASSING_ATAGS and friends to support legacy
	kernel method of booting (e.g. OpenWrt) with appended DTB.
	- Add CONFIG_UBIFS_SILENCE_MSG to reduce binary size.

Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220807192709.21717-1-pali@kernel.org/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-08-23 12:35:37 +02:00
Tony Dinh
5a86d67e31 arm: kirkwood: pogo_v4: Add Distro boot capability
- Add distro boot to board include file and deconfig file
- Miscellaneous changes:
	- Add CONFIG_SUPPORT_PASSING_ATAGS and friends to support legacy
	kernel method of booting (e.g. OpenWrt) with appended DTB.
	- Add CONFIG_LTO and CONFIG_UBIFS_SILENCE_MSG, and disable some
	unused configs	to reduce binary size.

Note that this patch is depended on the following patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220807192709.21717-1-pali@kernel.org/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-08-23 10:48:59 +02:00
Holger Brunck
845102cbe9 powerpc: remove support for kmtergr1 and MPC8309
The kmtegr1 board is out of maintenance and can be removed. As it is the
only board in the tree using MPC8309 the support for this CPU is dropped
completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-08-20 22:45:00 -04:00
Tom Rini
c50ff4a933 arm: Remove warp board
This board is missing migration to CONFIG_DM, which had a deadline of
v2020.01, which is now more than 2 years passed due.  Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 22:45:00 -04:00
Tom Rini
6dcca22f77 ls1021aqds/ls1021aiot: Remove legacy non-DM_ETH code
Now that we are about to enable DM_ETH by default, remove legacy code.

Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
0040ed7e0c ppc: Remove corenet_ds boards
These boards have been orphaned for some time and are behind on various
DM migrations. Remove them.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
40463b9c4a arm: Remove kzm9g board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
0fb054b3f7 arm: Remove armadillo-800eva board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00
Tom Rini
d8d5ab40d5 arm: Remove cm_t335 board
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-20 21:18:15 -04:00