Commit graph

36 commits

Author SHA1 Message Date
Bin Meng
76e726502e vbe: Drop vbe_get_video_info()
With DM video, this is not used any more. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-24 11:00:47 +08:00
Bin Meng
68769ebcbc x86: pci: Allow conditionally run VGA rom in S3
Introduce a new CONFIG_S3_VGA_ROM_RUN option so that U-Boot can
bypass executing VGA roms in S3.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stefan Roese <sr@denx.de>
2017-05-17 17:11:46 +08:00
Simon Glass
05cbd985c0 x86: Don't try to run the VGA BIOS in 64-bit mode
This is not supported, so disable it for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Bin Meng
5f6ad029f3 vbe: Make vbe_setup_video_priv() public
vbe_setup_video_priv() might be useful to other drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12 10:56:51 +08:00
Bin Meng
f0920e4a44 dm: video: Output verbose information in vbe_setup_video()
With DM conversion, information like "Video: 1024x768x16" is not
shown anymore. Now add these verbose output back.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12 10:56:50 +08:00
Simon Glass
ee87ee82e1 dm: video: Add driver-model support to vesa graphics
Provide a function to run the Vesa BIOS for a given PCI device and obtain
the resulting configuration (e.g. display size) for use by the video
uclass. This makes it easier to write a video driver that uses vesa and
supports driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11 11:55:33 +08:00
Bin Meng
f698baa9d1 pci: Add board_ prefix to should_load_oprom() and make it weak
For consistency with board_should_run_oprom(), do the same to
should_load_oprom(). Board support codes can provide this one
to override the default weak one.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12 13:46:01 +08:00
Bin Meng
c0aea6ba8b pci: Make load_oprom and run_oprom independent
At present should_load_oprom() calls board_should_run_oprom() to
determine whether oprom should be loaded. But sometimes we just
want to load oprom without running. Make them independent.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12 13:46:01 +08:00
Bin Meng
b45dd66225 pci: Remove CONFIG_ALWAYS_LOAD_OPROM
This option is defined at nowhere. Remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12 13:46:01 +08:00
Andreas Bießmann
ed48899c11 pci_rom: fix may be used uninitialized warning
Building pci_rom.c with my toolchain complains about may be used uninitialized
rom varaible:

---8<---
+drivers/pci/pci_rom.c:269:25: note: 'rom' was declared here
w+drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios':
w+drivers/pci/pci_rom.c:154:14: warning: 'rom' may be used uninitialized in this function [-Wmaybe-uninitialized]
--->8---

Fix this as done in 55616b86c7 the ram variable.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-02-24 18:43:59 -05:00
Simon Glass
7282672d29 dm: pci: Convert bios_emu to use the driver model PCI API
At present this BIOS emulator uses a bus/device/function number. Change
it to use a device if CONFIG_DM_PCI is enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:19 +08:00
Tom Rini
55616b86c7 pci_rom.c: Fix may be used uninitialized warning
With gcc-5.x we get:
drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios':
drivers/pci/pci_rom.c:352:3: warning: 'ram' may be used uninitialized in
this function [-Wmaybe-uninitialized]

While unconvinced that this can happen in practice (if we malloc we set
alloced to true, it will be false otherwise), silence the compiler.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-19 08:31:21 -05:00
Simon Glass
d830b1520a dm: pci: Avoid a memory leak when allocating the ROM
Adjust pci_rom_load() to return an indication of whether it allocated
memory or not. Adjust the caller to free it. This fixes a memory leak
when PCI_VGA_RAM_IMAGE_START is not used.

Reported-by: Coverity (CID: 134194)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-15 08:09:44 -05:00
Simon Glass
8beb0bda9c dm: x86: pci: Adjust bios_run_on_x86() to use the DM PCI API
This function should take a struct udevice rather than pci_dev_t. Update it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Simon Glass
3f4e1e8efc dm: pci: video: Convert video and pci_rom to use DM PCI API
Adjust these files to use the driver-model PCI API instead of the legacy
functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Bin Meng
789fa275b3 x86: Remove HAVE_ACPI_RESUME
These are currently dead codes. Until we have complete ACPI support,
we don't know if it works or not. Remove to avoid confusion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:56 +08:00
Bin Meng
1916ec1267 x86: Set up video framebuffer for coreboot before loading kernel
Currenlty we only set up video framebuffer when VIDEO_VESA driver is
used. With coreboot, VIDEO_COREBOOT driver is used instead. Since we
already saved VESA mode in the VIDEO_COREBOOT driver, now we can also
set up video framebuffer for coreboot before loading Linux kernel.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:09 -07:00
Bin Meng
153e1dda2f video: coreboot: Save VESA mode for future use
When booting as a coreboot payload, the framebuffer details are
passed from coreboot via configuration tables. We save these
information into vesa_mode_info structure for future use.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:08 -07:00
Bin Meng
1e7a047304 x86: Sanity test on vesa parameters before setting up kernel screen_info
We should not set up kernel screen_info when the vesa parameters are
insane, otherwise kernel will panic.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:38 -06:00
Bin Meng
f110da9984 pci: Disable expansion ROM address decoding when signature check fails
We should not leave the expansion ROM address window open when there
is not a valid ROM.

Suggested-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:20 -06:00
Bin Meng
6c89663cb1 pci: Configure expansion ROM during auto config process
Currently PCI expansion ROM address is assigned by a call to
pciauto_setup_rom() outside of the pci auto config process.
This does not work when expansion ROM is on a device behind
PCI bridge where bridge's memory limit register was already
programmed to a value that does not cover the newly assigned
expansion ROM address. To fix this, we should configure the
ROM address during the auto config process.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:20 -06:00
Bin Meng
a452002259 x86: Configure VESA parameters before loading Linux kernel
Store VESA parameters to Linux setup header so that vesafb driver
in the kernel could work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
2015-07-14 18:03:19 -06:00
Bin Meng
786a08e0dd x86: Move VGA option rom macros to Kconfig
Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig
and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on
HAVE_VGA_BIOS. The new names are consistent with other x86 binary
blob options like HAVE_FSP/FSP_FILE/FSP_ADDR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Jian Luo
0e98a1473a video: Add 32-bit color depth support for VBE
The TunnelCreek IGD VBE reports 32-bit color depth regardless 24-bit
color depth is configured. Since 24-bit mode already uses 4 bytes
internally, it should be OK to just add this option in switch case.

Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-14 18:03:18 -06:00
Bin Meng
81d0b354b0 pci: Remove parameter 'class' of pci_rom_load()
pci_rom_load() does not use its parameter 'class', so remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-29 18:51:49 -06:00
Bin Meng
d57c2f24fc pci: Option rom class is a 24-bit number
We should pass a u32 class number to pci_rom_probe() instead of a u16.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-29 18:51:49 -06:00
Simon Glass
bc17d8f4ac x86: video: Allow video ROM execution to fall back to the other method
If the BIOS emulator is not available, allow use of native execution if
available, and vice versa. This can be controlled by the caller.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05 22:16:43 -07:00
Minghuan Lian
ef2d17fe21 drivers/pci/pci_rom.c: fix compile warning under 64bit mode
Fix this:
drivers/pci/pci_rom.c:95:15: warning: cast to pointer from
integer of different size [-Wint-to-pointer-cast]
rom_header = (struct pci_rom_header *)rom_address;

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
2015-01-30 09:19:16 -05:00
Simon Glass
4a2708a097 x86: Access the VGA ROM when needed
Add code to the generic pci_rom file to access the VGA ROM in PCI space
when needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-23 17:24:54 -07:00
Simon Glass
c5caba0366 x86: pci: Don't stop when we get a vendor/device mismatch
These are quite common and we may as well press on and not be so picky.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-23 17:24:16 -07:00
Simon Glass
bdc88d4eb3 x86: Support ROMs on other archs
We shouldn't assume that the VGA ROM can always be loaded at c0000. This
is only true on x86 machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-23 17:24:15 -07:00
Simon Glass
40305240c6 x86: Correct endianness isues in pci_rom
This code is too x86-dependent at present. Correct it so that it can run on
big-endian machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-23 17:24:15 -07:00
Simon Glass
9a99caf3f3 x86: pci: Display vesa modes in hex
The hex value is more commonly understood, so use that instead of decimal.
Add a 0x prefix to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13 07:25:00 -08:00
Simon Glass
fba7eac1c8 x86: video: Add debug option to time the BIOS copy
This can be very slow - typically 80ms even on a fast machine since it uses
the SPI flash to read the data. Add an option to display the time taken.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13 07:24:59 -08:00
Simon Glass
23609c71dc x86: pci: Don't return a vesa mode when there is not video
If the video has not been set up, we should not return a success code. This
can be detected by seeing if any of the variables are non-zero.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13 07:24:58 -08:00
Simon Glass
6854f87cbc pci: Add general support for execution of video ROMs
Some platforms don't have native code for dealing with their video
hardware. In some cases they use a binary blob to set it up and perform
required actions like setting the video mode. This approach is a hangover
from the old PC days where a ROM was provided and executed during startup.

Even now, these ROMs are supplied as a way to set up video. It avoids the
code for every video chip needing to be provided in the boot loader. But
it makes the video much less flexible - e.g. it is not possible to do
anything else while the video init is happening (including waiting hundreds
of milliseconds for display panels to start up).

In any case, to deal with this sad state of affairs, provide an API for
execution of x86 video ROMs, either natively or through emulation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 07:11:14 -07:00