Commit graph

33 commits

Author SHA1 Message Date
Troy Kisky
abbab70363 mx31/mx35/mx51/mx53/mx6: add watchdog
Use a common watchdog driver for all these cpus.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-01-13 11:39:57 +01:00
Benoît Thébaudeau
71a5c55bfa ehci-mxc: Add support for i.MX35
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:45 +01:00
Stefano Babic
d81b27a245 MX35: add support for woodburn board
The woodburn board is based on the MX35 SOC.
Support for both external (NOR) and internal
(SD Card) boot mode are added. It uses the
generic SPL framework to implement the internal boot
mode.

The following peripherals are supported:
- Ethernet (FEC)
- SD Card
- NAND (512 MB)
- NOR Flash

In the internal boot mode, a simple imximage header
is generated to set the address in internal RAM
where the SOC must copy the SPL code. The initial setup
is then demanded to the SPL itself.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-10-26 16:27:59 +02:00
Stefano Babic
d41924a2c1 MX35: Add soc_boot_mode and soc_boot_device to MX35
The functions are required to use the generic
SPL Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-10-26 16:27:58 +02:00
Stefano Babic
e650030347 MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-10-26 16:27:58 +02:00
Benoît Thébaudeau
6e3dc12754 mx35: Fix eSDHC clocks
Each eSDHC instance has a dedicated clock.

gd->sdhc_clk must also be set accordingly. This is good for the case only a
single SDHC instance is used (initialization made with fsl_esdhc_mmc_init()). A
future patch will fix the multi-instance use case (initialization made directly
with fsl_esdhc_initialize()).

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Eric Bénard <eric@eukrea.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
2012-10-16 12:35:10 +02:00
Benoît Thébaudeau
151d63cb91 mx35: Clean up lowlevel_init
Clean up mx35 lowlevel_init:
 - Indent with tabs.
 - Fix comments.
 - Use defined values instead of literal constants.
 - Use defined macros instead of duplicating code.
 - Use macro parameters with default values instead of #define'd configs.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-16 12:35:10 +02:00
Benoît Thébaudeau
b809b3ac13 mx35: Define MAX and AIPS registers
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:14 -07:00
Matthias Weisser
e7bed5c2b3 imx: Use MXC_I2C_CLK in imx i2c driver
i2c didn't work on imx25 due to missing MXC_IPG_PERCLK. Now using
MXC_I2C_CLK on all imx systems using i2c.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:10 -07:00
Benoît Thébaudeau
9c6c5c0676 mx35: Define default SoC input clock frequencies
Define default SoC input clock frequencies for i.MX35 in order to get rid of
duplicated definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-06 11:05:17 +02:00
Benoît Thébaudeau
82e1b543b5 mx35: Fix clock dividers
The clock dividers that were used do not match at all the reference manual. They
were either completely broken, or came from an early silicon revision
incompatible with the current one.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-09-06 11:05:01 +02:00
Benoît Thébaudeau
9ba81baabb mx35: Add definitions for clock gate values
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-09-06 11:04:53 +02:00
Benoît Thébaudeau
8e99ecd74b mxc: Define architecture identifier
Define ARCH_MXC for i.MX devices. This is useful to identify features or
behaviors common to all i.MX SoCs.

The i.MX28 is omitted because its architecture is a bit different (like imx/mxc
vs. mxs in Linux).

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
2012-09-01 14:58:30 +02:00
Benoît Thébaudeau
483920f273 mx35: Remove declaration of non-existing function
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:28 +02:00
Benoît Thébaudeau
7c80326d34 mx35: Move clock enums to clock.h
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:28 +02:00
Benoît Thébaudeau
d365e2d7c3 mx35: Remove declaration of non-existing function
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:28 +02:00
Benoît Thébaudeau
fe24d6143d mx35: Fix broken pin definitions
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:28 +02:00
Stefano Babic
5fecb36ca0 MX: Set a common gpio.h for all i.MX
Each i.MX has its own gpio.h, defining the same structure.
The internal GPIO controller has the same layout
(at least for the register used by u-boot) and can be shared.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Matt Sealey <matt@genesi-usa.com>
2012-09-01 14:58:27 +02:00
Benoît Thébaudeau
83209cb785 mx35: Remove duplicate GPIO3_BASE_ADDR
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:26 +02:00
Benoît Thébaudeau
f2d3ae0739 mx3: Fix typo on IPU_CONF_CSI_EN
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:26 +02:00
Benoît Thébaudeau
34a31bf52b mx35: Fix typo on EDIO
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:26 +02:00
Troy Kisky
de6f604de2 mxc_i2c: specify i2c base address in config file
The following platforms had their config files changed
flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd
and mx53loco.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-07-11 10:54:29 +02:00
Vikram Narayanan
a9407f2bc5 imx: Remove unneeded/repititive definitions from imx headers
Remove gpio related unused/repititive definitions from imx headers.

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Eric Nelson
08c61a589b mxc_spi: move machine specifics into CPU headers
Move (E)CSPI register declarations into the imx-regs.h files for each supported CPU

Introduce two new macros to control conditional setup
     MXC_CSPI - Used for processors with the Configurable Serial Peripheral Interface (MX3x)
     MXC_ECSPI - For processors with Enhanced Configurable... (MX5x, MX6x)

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jason Liu <jason.hui@linaro.org>
Tested-by: Jason Liu <jason.hui@linaro.org>
2012-02-27 21:19:23 +01:00
Stefano Babic
40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-12-06 23:59:40 +01:00
Stefano Babic
f6dc192e14 MX35: Drop unnecessary prototypes from imx-regs.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-11-03 22:56:18 +01:00
Stefano Babic
324a131e7c MX35: factorize common assembly code
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-11-03 22:56:18 +01:00
Stefano Babic
e0a83cc1f5 MX35: add pins definition for UART3
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-11-03 22:56:17 +01:00
Stefano Babic
9d940442d3 MX35: added ESDC structure to imx-regs
The structure and PLL defines are added to
the imx-regs.h file and dropped from board
header files.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-11-03 22:56:17 +01:00
Marek Vasut
8edcc6f221 FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-09-30 22:01:03 +02:00
Stefano Babic
729b74add9 MX35: make use of GPIO framework for MX35 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Stefano Babic
ac87c17d34 SPI: mxc_spi: replace fixed offsets with structures
This patch cleans driver code replacing all accesses
to registers with fixed offsets with a corresponding
structure.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02 00:54:43 +01:00
Stefano Babic
b9bb053159 Add support for MX35 processor
The patch adds basic support for the Freescale's i.MX35
(arm1136 based) processor.

The patch adds also a prototype for the initialization
of the FEC(ethernet controller) to netdev.h to avoid
warnings.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02 00:54:42 +01:00