Commit graph

55909 commits

Author SHA1 Message Date
Horatiu Vultur
746f2d3e8b net: Add MSCC ServalT network driver.
Add network driver for Microsemi Ethernet switch.
It is present on ServalT SoCs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:52 +02:00
Horatiu Vultur
b158e56f34 configs: vcoreiii: Change CONFIG_ENV_SIZE
Shrink the environment size for 3 reasons:

 - reading the environment it is slow, therefore having a smaller env
   improves the speed.
 - usually in the environment there are only few variables, therefore
   the enviromnent is almost empty.
 - because the same image can run on different boards which may have
   different flashes with different page sizes, the CONFIG_ENV_SECT_SIZE
   can't be change, it is set to least common multiple of the page sizes.

Adding this change improves the boot time. Before update for reading the
entire environment it took ~850 msec, after the change it takes ~40 msecs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
27fc2f281c configs: mscc_jr2: Add network support
Update default confing to use network driver for Jaguar2 SoCs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
1141176163 net: mscc: jaguar2: Add ethenet nodes for Jaguar2.
Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this
family: pcb110, pcb111 and pcb112.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
6aa50ae22c board: mscc: jr2: Update MSCC Jaguar2 boards
In Jaguar2 SoC family there are 3 different pcb. Each of this needs
to configure the phys in different ways. Therefore implement the
function board_phy_config and based on pcb configure them accordingly.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
5e1d417bec net: Add MSCC Jaguar2 network driver.
Add network driver for Microsemi Ethernet switch.
It is present on Jaguar2 SoCs.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
d8c7ae7253 bcm963158: enable gpio support
Enable the gpio support (driver and command)
in the configuration of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
1e4a7c69fd dt: bcm963158: enable gpio controller
Enable all the gpio controllers in the device tree
of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
938f10b7f6 dt: bcm63158: add gpio controller
Add 8 gpio controllers in the bcm63158 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
2629128572 gpio: do not include <asm/arch/gpio.h> on ARCH_BCM63158
As no gpio.h is defined for this architecture, to avoid
a compilation failure, do not include <asm/arch/gpio.h>
for arch bcm63158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
353496b756 gpio: bcm6345: allow this driver on ARCH_BCM63158
This IP is also used on some arm SoC, so we allow
to use this driver on arch bcm63158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
185dc24c1c bcm968580xref: enable gpio support
Enable the gpio support (driver and command)
in the configuration of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
396fff8da2 dt: bcm968580xref: enable gpio controller
Enable all the gpio controllers in the device tree
of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
9575c7ebc8 dt: bcm6858: add gpio controller
Add 8 gpio controllers in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
d96e7ed802 gpio: do not include <asm/arch/gpio.h> on ARCH_BCM6858
As no gpio.h is defined for this architecture, to avoid
compilation failure, do not include <asm/arch/gpio.h> for
arch bcm6858.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
14c9bd46e5 gpio: bcm6345: allow this driver on ARCH_BCM6858
This IP is also used on some arm SoC, so we allow
to use this driver on arch bcm6858.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
a8a33a53ba bcm968380gerg: enable gpio support
Enable the gpio support (driver and command)
in the configuration of the board bcm968380gerg

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
f1ed3cfc53 dt: bcm968380gerg: enable gpio controller
Enable the gpio controllers in the device tree
of the board bcm968380gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
ce171053a8 dt: bcm6838: add gpio controller
Add gpio controllers in bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
ea0d6aa213 gpio: bcm6345: switch to raw I/O functions
This driver is used on several big endian mips board.
So we could use raw I/O function instead of forcing
big endian access.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:51 +02:00
Rosy Song
8426523af1 ag7xxx: add initial support for s17
S17 ethernet support is for QCA8337N, which used on
AP152 (QCA9563) board. It is a 7 ports GbE switch.

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2-v3:
   - add more commit message for s17

Changes for v4-v5:
   - coding style cleanup
2019-04-12 17:32:51 +02:00
Rosy Song
61290fb52c mips: add initial support for qca956x referenced board
QCA9563 is CPU used on AP152 board :

    Clock speed : 750 MHz ,
    Arch :  Mips 74Kc,
    Eth : SGMII interface,
    MIMO config : 3 * 3 450M,
    2 * USB 2.0,

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2:
   - coding style cleanup
   - remove ununsed flash chip in defconfig
   - enable automatic icache / dcache size in defconfig

Changes for v3:
   - add detailed information for qca956x in commit message

Changes for v4:
   - remove pre-configured network settings in ap152.h

Changes for v5:
   - coding style cleanup
2019-04-12 17:32:50 +02:00
Rosy Song
fda1bb0574 mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X
See details in chapter 8.6.2 and 8.6.4 (page 140-141) of qca9563 datasheet,

   NFRAC[17:0]

So the mask of [17:5] is 0x1fff not 0x3fff.

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2-v3:
   - add more information for this commit

Changes for v4-v5:
   - coding style cleanup
2019-04-12 17:32:50 +02:00
Álvaro Fernández Rojas
e4f907e968 dma: bcm6348: check if driver is enabled before send/recv
This patch prevents errors when running tftpput.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-04-12 17:32:50 +02:00
Horatiu Vultur
cd424f35ee net: mscc: ocelot: Fix reset of the phys
The function mscc_miim_reset resets all the phys, but it is called for
each phy separetely. One consequence of this is that the boot time
is increased by 2 seconds.

The fix consists for calling the mscc_miim_reset function only once for
all phys.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00
Horatiu Vultur
e515166636 bootm: mips: Remove boot_reloc_ramdisk
Remove the function boot_reloc_ramdisk in the file arch/mips/lib/bootm
because it is relocating again the ramdisk. The function do_bootm_states()
already relocates the ramdisk even if it is a legacy uImage or a FIT image.

The relocation in the function do_bootm_states() was introduce in the
commit c2e7e72bb9 ("bootm: relocate ramdisk
if CONFIG_SYS_BOOT_RAMDISK_HIGH set")

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00
Stefan Roese
eacbdd64cc mips: mt76xx: gardena-smart-gateway: Correct spelling of GARDENA
This patch changes Gardena to the correct GARDENA spelling. Also the
platform name is "GARDENA smart Gateway". This patch changes the
incorrect occurrances.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00
Stefan Roese
f06ada614f mips: mt76xx: linkit: Add mtd command support
The new mtd is very useful so let's enable it on the LinkIt Smart
7688 as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Jiri Kastner <cz172638@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00
Rosy Song
395e2d43bd mips: add ethernet support for qca953x referenced boards
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-12 17:32:50 +02:00
Rosy Song
f1f943e96c drivers: add ethernet support for qca953x in ag7xxx driver
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-12 17:32:50 +02:00
Rosy Song
9db4621d43 drivers: fix typo for pinctrl qca953x
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-12 17:32:50 +02:00
Tom Rini
02f173ca15 Merge branch 'master' of git://git.denx.de/u-boot-usb 2019-04-11 14:29:37 -04:00
Tom Rini
f95fdf237d Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various rmobile fixes
2019-04-11 14:29:22 -04:00
Tom Rini
48ff1bc4f0 Merge branch '2019-04-09-master-imports-fs'
- test.py tests for mmc
- ext4 symlink support and other fixes
- ext4 block group descriptor sizing
2019-04-10 08:18:18 -04:00
Tom Rini
0a8406602a test.py: Disable fsck for FAT tests for now
Currently enabling fsck on FAT16/FAT32 exposes that we have problems
with:
TestFsBasic.test_fs13[fat16]
TestFsBasic.test_fs11[fat32]
TestFsBasic.test_fs12[fat32]
TestFsBasic.test_fs13[fat32]
TestFsExt.test_fs_ext1[fat32]
TestFsExt.test_fs_ext2[fat32]
TestFsExt.test_fs_ext3[fat32]
TestFsExt.test_fs_ext4[fat32]
TestFsExt.test_fs_ext5[fat32]
TestFsExt.test_fs_ext6[fat32]
TestFsExt.test_fs_ext7[fat32]
TestFsExt.test_fs_ext8[fat32]
TestFsExt.test_fs_ext9[fat32]
TestMkdir.test_mkdir6[fat16]
TestMkdir.test_mkdir1[fat32]
TestMkdir.test_mkdir2[fat32]
TestMkdir.test_mkdir3[fat32]
TestMkdir.test_mkdir4[fat32]
TestMkdir.test_mkdir5[fat32]
TestMkdir.test_mkdir6[fat32]
TestUnlink.test_unlink1[fat16]
TestUnlink.test_unlink2[fat16]
TestUnlink.test_unlink3[fat16]
TestUnlink.test_unlink4[fat16]
TestUnlink.test_unlink5[fat16]
TestUnlink.test_unlink6[fat16]
TestUnlink.test_unlink7[fat16]
TestUnlink.test_unlink1[fat32]
TestUnlink.test_unlink2[fat32]
TestUnlink.test_unlink3[fat32]
TestUnlink.test_unlink4[fat32]
TestUnlink.test_unlink5[fat32]
TestUnlink.test_unlink6[fat32]
TestUnlink.test_unlink7[fat32]

This is because we don't update the "information sector" on FAT32.
While in the future we should resolve this problem and include that
feature, we should enable fsck for ext4 to ensure that things remain in
good shape there.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-10 08:15:56 -04:00
Benjamin Lim
febbc58331 Fix ext4 block group descriptor sizing
Ext4 allows for arbitrarily sized block group descriptors when 64-bit
addressing is enabled, which was previously not properly supported. This
patch dynamically allocates a chunk of memory of the correct size.

Signed-off-by: Benjamin Lim <jarsp.ctf@gmail.com>
2019-04-09 20:04:06 -04:00
Marek Vasut
e551979790 test/py: mmc: Add 'mmc read' performance check
Add option to the mmc rd test to check the duration of the
execution of the mmc read command. This allows intercepting
read performance regressions.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:05 -04:00
Marek Vasut
4ffec8cdf5 test/py: mmc: Add 'mmc info' test
Add test for 'mmc info' subcommand. This tests whether the card
information is obtained correctly and verifies the device, bus
speed, bus mode and bus width.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:05 -04:00
Marek Vasut
ce4b2cafa7 test/py: mmc: Add 'mmc rescan' test
Add test for 'mmc rescan' subcommand. This tests whether the
system can switch to a specific card and then rescan the card.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:05 -04:00
Marek Vasut
86dfd152c9 test/py: mmc: Add 'mmc dev' test
Add separate test for 'mmc dev' subcommand. This tests whether
the system can switch to a specific card.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:04 -04:00
Marek Vasut
d22f7ad86a test/py: mmc: Factor out device selection
Factor out the 'mmc dev' call so it can be recycled by other tests.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 20:04:04 -04:00
Anssi Hannula
9b18358dc0 fs: fat: fix reading non-cluster-aligned root directory
A FAT12/FAT16 root directory location is specified by a sector offset and
it might not start at a cluster boundary. It also resides before the
data area (before cluster 2).

However, the current code assumes that the root directory is located at
a beginning of a cluster, causing no files to be found if that is not
the case.

Since the FAT12/FAT16 root directory is located before the data area
and is not aligned to clusters, using unsigned cluster numbers to refer
to the root directory does not work well (the "cluster number" may be
negative, and even allowing it be signed would not make it properly
aligned).

Modify the code to not use the normal cluster numbering when referring to
the root directory of FAT12/FAT16 and instead use a cluster-sized
offsets counted from the root directory start sector.

This is a relatively common case as at least the filesystem formatter on
Win7 seems to create such filesystems by default on 2GB USB sticks when
"FAT" is selected (cluster size 64 sectors, rootdir size 32 sectors,
rootdir starts at half a cluster before cluster 2).

dosfstools mkfs.vfat does not seem to create affected filesystems.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Reviewed-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Tested-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
2019-04-09 20:04:04 -04:00
Gero Schumacher
1c48fda3e5 fs: ext4: Problem with ext4load and sparse files
Hi,

when I try to load a sparse file via ext4load, I am getting the error message
'invalid extent'

After a deeper look in the code, it seems to be an issue in the function ext4fs_get_extent_block in fs/ext4/ext4_common.c:

The file starts with 1k of zeros. The blocksize is 1024. So the first extend block contains the following information:

eh_entries: 1
eh_depth: 1
ei_block 1

When the upper layer (ext4fs_read_file) asks for fileblock 0, we are running in the 'invalid extent' error message.
For me it seems, that the code is not prepared for handling a sparse block at the beginning of the file. The following change, solved my problem:

I am really not an expert in ext4 filesystems. Can somebody please have a look at this issue and give me a feedback, if I am totally wrong or not?
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
ef79284e7a test: fs: Added tests for symlinks
Test cases are:
1) basic link creation, verify it can be followed
2) chained links, verify it can be followed
3) replace exiting file a with a link, and a link with a link. verify it
   can be followed
4) create a broken link, verify it can't be followed

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
aaa12157c7 fs: Add a new command to create symbolic links
The command line is:
ln <interface> <dev[:part]> target linkname

Currently symbolic links are supported only in ext4 and only if the option
CMD_EXT4_WRITE is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
5efc0686ee fs: ext4: Add support for the creation of symbolic links
Re-use the functions used to write/create a file, to support creation of a
symbolic link.
The difference with a regular file are small:
- The inode mode is flagged with S_IFLNK instead of S_IFREG
- The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG
- Instead of storing the content of a file in allocated blocks, the path
to the target is stored. And if the target's path is short enough, no block
is allocated and the target's path is stored in ext2_inode.b.symlink

As with regulars files, if a file/symlink with the same name exits, it is
unlinked first and then re-created.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix ext4 env code]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:03:30 -04:00
Jean-Jacques Hiblot
b000180b0f fs: ext4: constify the buffer passed to write functions
There is no need to modify the buffer passed to ext4fs_write_file().
The memset() call is not required here and was likely copied from the
equivalent part of the ext4fs_read_file() function where we do need it.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Jean-Jacques Hiblot
290100583d test: fs: Add filesystem integrity checks
We need to make sure that file writes,file creation, etc. are properly
performed and do not corrupt the filesystem.
To help with this, introduce the assert_fs_integrity() function that
executes the appropriate fsck tool. It should be called at the end of any
test that modify the content/organization of the filesystem.
Currently only supports FATs and EXT4.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Jean-Jacques Hiblot
5cfc73e6e2 test: fs: disable the metadata checksums on ext4 filesystems
If the metadata checksums are enabled, all write operations will fail.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Stephen Warren
d5aee659f2 fs: ext4: cache extent data
When a file contains extents, U-Boot currently reads extent-related data
for each block in the file, even if that data is located in the same
block each time. This significantly slows down loading of files that use
extents. Implement a very dumb cache to prevent repeatedly reading the
same block. Files with extents now load as fast as files without.

Note: There are many cases where read_allocated_block() is called. This
patch only addresses one of those places; all others still read redundant
data in any case they did before. This is a minimal patch to fix the
load command; other cases aren't fixed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-04-09 15:34:15 -04:00