Commit graph

14 commits

Author SHA1 Message Date
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Philipp Tomsich
ad972ac3d9 rockchip: mkimage: force 2KB alignment for init_size
The Rockchip BootROM relies on init_size being aligned to 2KB
(see https://lists.denx.de/pipermail/u-boot/2017-May/293268.html).

This pads the image to 2KB both for SD card images and SPI images
and uses a common symbolic constant for the alignment.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:22 -06:00
Philipp Tomsich
2fb371ff64 rockchip: mkimage: add support for verify_header/print_header
The rockchip image generation was previously missing the ability to
verify the generated header (and dump the image-type) without having
to resort to hexdump or od. Experience in our testing has showed it
to be very easy to get the rkspi and rksd images mixed up and the
lab... so we add the necessary support to have dumpimage tell us
what image type we're dealing with.

This change set adds the verify_header and print_header capability
to the rksd/rkspi image drivers (through shared code in rkcommon).

As of now, we only support images fully that are not RC4-encoded for
the SPL payload (i.e. header1 and payload). For RC4-encoded payloads,
the outer header (header0) is checked, but no detection of whether
this is a SD/MMC or SPI formatted payload takes place.

The output of dumpsys now prints the image type (spl_hdr), whether it
is a SD/MMC or SPI image, and the (padded) size of the image:
  $ ./tools/dumpimage -l ./spl.img
  Image Type:   Rockchip RK33 (SD/MMC) boot image
                               ^^^^^^ SD/MMC vs. SPI indication
                         ^^^^ spl_hdr indicated by the image
  Data Size:    79872 bytes

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:22 -06:00
Philipp Tomsich
c25b8c3af1 rockchip: mkimage: rksd: pad SD/MMC images to a full blocksize
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10 13:37:21 -06:00
Philipp Tomsich
366aad4d97 rockchip: mkimage: rewrite padding calculation for SD/MMC and SPI images
In (first) breaking and (then) fixing the rkspi tool, I realised that
the calculation of the required padding (for the header-size and the
2K-in-every-4K SPI layout) was not as self-explainatory as it could
have been.  This change rewrites the code (using new, common functions
in rkcommon.c) and adds verbose in-line comments to ensure that we
won't fall into the same pit in the future...

Tested on the RK3399 (with has a boot0-style payload) with SD/MMC and SPI.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10 13:37:21 -06:00
Philipp Tomsich
111bcc4fb6 rockchip: mkimage: pad the header to 8-bytes (using a 'nop') for RK3399
The RK3399 boot code (running as AArch64) poses a bit of a challenge
for SPL image generation:
 * The BootROM will start execution right after the 4-byte header (at
   the odd instruction word loaded into SRAM at 0xff8c2004, with the
   'RK33' boot magic residing at 0xff8c2000).
 * The default padding (during ELF generation) for AArch64 is 0x0,
   which is an illegal instruction and the .text section needs to be
   naturally aligned (someone might locate a 64bit constant relative
   to the section start and unaligned loads trigger a fault for all
   privileged modes of an ARMv8)... so we can't simply define the
   CONFIG_SPL_TEXT_BASE option to the odd address (0xff8c2004).
 * Finally, we don't want to change the values used for padding of
   the SPL .text section for all ARMv8 targets to the instruction
   word encoding 'nop', as this would affect all padding in this
   section and might hide errors that would otherwise quickly trigger
   an illegal insn exception.

To deal with this situation, we modify the rkimage generation to
 - understand the fact that the RK3399 needs to pad the header to an
   8 byte boundary using an AArch64 'nop'
 - the necessary logic to adjust the header_size (which controls the
   location where the payload is copied into the image) and to insert
   this padding (AArch64 insn words are always little-endian) into
   the image following the 4-byte header magic.

X-AffectedPlatforms: RK3399-Q7
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-04-04 20:01:57 -06:00
Philipp Tomsich
f3edf8b18f rockchip: mkimage: simplify start/size calculation for rc4_encode
The RC4 encoding works on full blocks, but the calculation of the
starting offset and size are needlessly complicated by using a
reference value known to be offset into a block by the size of the
header and then correcting for the (hard-coded) size of the header
(i.e. 4 bytes).

We change this over to use the RK_SPL_HDR_START directly (which is
known to be on a block boundary).

X-AffectedPlatforms: RK3399-Q7
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-04-04 20:01:57 -06:00
Heiko Stübner
cfbcdade76 rockchip: mkimage: Allow encoding of loader code in spl images
Rockchip SoCs allow the spl code to be rc4-encoded, not only the
image header, but only newer SoCs allow this encoding to be disabled.

The rk3188 is not part of those and requires its boot code to be
rc4-encoded with the regular key. So add the ability to do this
encoding via a setting on a per-soc basis when building spl images.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:44 -06:00
Jeffy Chen
7bf274b9ca rockchip: mkimage: use imagename to select spl hdr & spl size
Our chips may have different spl size and spl header, so
use imagename(passed by "mkimage -n") to select them now.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13 17:07:29 -07:00
Jeffy Chen
5cc5b901e6 Revert "rockchip: Add max spl size & spl header configs"
This reverts commit 10b4615f9d7e177ec7fe644fbb2616e0e0956f6e

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13 17:07:06 -07:00
Jeffy Chen
3641339eff rockchip: Add support for rk's second level loader
The Rockchip boot ROM could load & run an initial spl loader,
and continue to load a second level boot-loader(which stored
right after the initial loader) when it returns.
Modify idblock generation code to support it.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
Jeffy Chen
6ae5860942 rockchip: Add max spl size & spl header configs
Our chips may have different max spl size and spl header, so
we need to add configs for that.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Dropped CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
Added $(if...) to tools/Makefile to fix widespread build breakage
Signed-off-by: Simon Glass <sjg@chromium.org>

Series-changes: 8
- Drop CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
- Add $(if...) to tools/Makefile to fix widespread build breakage
2015-12-01 08:07:22 -07:00
Sjoerd Simons
dd39bcaffb rockchip: Drop first 32kb of zeros from the rkSD image type
Instead of creating a rockchip SPL SD card image with 32KB of zeros
which can be written to the start of an SD card, create the images with
only the useful data that should be written to an offset of 32KB on the
SD card.

The first 32 kilobytes aren't needed for bootup and only serve as
convenient way of accidentally obliterating your partition table.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:25 -06:00
Simon Glass
f9a3c278b9 rockchip: Add support for the SD image
The Rockchip boot ROM requires a particular file format. It consists of
64KB of zeroes, a 512-byte header encoded with RC4, and then some executable
code.

Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be
converted to this format.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00