Commit graph

49859 commits

Author SHA1 Message Date
Michal Simek
cd1c2fa5f7 arm64: zynqmp: Enable Fixed link support
This patch enables the fixed link support for
all ZynqMP boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
4b148959da arm64: zynqmp: Enable mac address randomization for zc1751 dc5
There is no memory which stores mac address that's why generate it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
c7e36de6a7 arm64: zynqmp: Enable ethernet phys for zc1751 dc5
Enable ethernet phys for zc1751 dc5.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Luca Ceresoli
5e3cac50cc arm64: zynqmp: Enable booting to ATF
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.

To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
1a82f59b31 arm64: zynqmp: Enable pxe and dhcp if commands are enabled
Targets without net can't use pxe or dhcp boot methods.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Siva Durga Prasad Paladugu
c643c491b9 net: phy: xilinx_phy: Read phytype using property xlnx,phy-type
This patch reads phytype from property "xlnx,phy-type" instead
od simply looking for "phy-type". This is to be inline with
Linux and also fixes the issue of detecting it wrongly in
u-boot.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09 12:14:51 +02:00
Vipul Kumar
047f3bf828 axi: ethernet: Added support for 64 bit addressing for axi-ethernet
This patch uses writeq() function to enable greater than 32 bit
addressing of axi-ethernet for the ZynqMP devices.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09 12:14:50 +02:00
Vipul Kumar
6fbbe2d8f6 nand: arasan_nfc: Fixed NAND write issue
In commit 2453c69518 ("arm64: zynqmp: nand: Fixed NAND erase issue for
size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed
to 0xFFFF and the same macro is used in nand write and so that getting
nand write error.
This patch reverted this macro to the 0xFFFF0000 and used
ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function
which is equal to 0xFFFF.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
71723aaec5 fpga: zynq: Add delay after PCFG_PROG_B change
There is delay needed after PCFG_PROGB change if
AES key source is efuse. This fixes the issue of
encrypted bitstream loading with AES efuse as key
source.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
31bcb3444c fpga: zynqmp: Fix the nonsecure bitstream loading issue
Xilfpga library expects the size of bitstream in a pointer
but currenly we are passing the size as a value. This patch
fixes this issue.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
19ed4b697b fpga: zynqmp: Update zynqmp_load() as per latest xilfpga
Latest xilfpga expects to set BIT5 of flags for nonsecure
bitsream and also expects length in bytes instead of words
This patch does the same.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09 12:14:50 +02:00
Nitin Jain
b32e11a715 fpga: zynqmp: Add support to get the PCAP status for fpga info command
This patch adds support for ZynqMP platform to print FPGA PCAP status
for "fpga status" command.

Signed-off-by: Nitin Jain <nitinj@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Michal Simek
969dd4c7db clk: zynqmp: Add new compatible string for clock driver
New and old clk drivers are sharing IDs and descriptions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Michal Simek
5510d63786 arm: zynq: Use fixed partitions for spi flash for zc770 xm010
Sync with mainline.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Michal Simek
99a2e34d77 arm: zynq: Fix eeprom dt nodes
- Use eeprom for node name
- Use atmel compatible string instead of at.
- Add missing labels

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Javier Martinez Canillas
a3e10642da ARM: dts: zynq: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
c78a80ad13 arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
i2c muxes should described like this.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
051a8ad7bb arm: zynq: Sync up licenses with mainline kernel
Use different location for SPDX line. Also update dates for new mainline
DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
03bc69dec9 arm: zynq: Remove 0x prefixes from cc108
The patch fixing issues reported by DTC:
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0x400000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0x800000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xc00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xd00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xf00000 unit name should not have
leading "0x"

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
5208a3a46a arm64: zynqmp: Remove double spaces from dts file
There is no reason to have double spaces for indentation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
bbe5c7252d arm64: zynqmp: Add silabs prefix to u69 for zcu102
Add vendor prefix to si5341.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
147ae1f210 arm64: zynqmp: Remove number from clock-generator node name
There shouldn't be a number appended based on spec.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:49 +02:00
Michal Simek
95f7d6419d arm64: zynqmp: Remove u-boot commands from dts files
U-Boot commands shouldn't be the part of kernel DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Srinivas Goud
1077dc2889 arm64: zynqmp: Update sd properties for dc5
This patch adds no-1-8-v below properties to sd node for dc5 board dts.

Signed-off-by: Srinivas Goud <srinivas.goud@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
470f09c912 arm64: zynqmp: Enable ttcs for zc1751 dc5
Enable TTCs for this target as is done in Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
43bf439472 arm64: zynqmp: Add eeprom reference to eeprom nodes
eeprom can contain information which can be used by nvmem drivers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
098505f500 arm64: zynqmp: Use atmel prefix instead of at
This changes was done in mainline and this patch is just following it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
ba9da60c4b arm64: zynqmp: Fix spi flash partition definition for zc1751 dc2
Using different node name and label partitions as data.
Also use latest compatible strings based on mainline review.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
d13d97bb95 arm64: zynqmp: Use s/_/-/g in node name for zcu102 rev1.0
Follow spec for node names.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
9d928f0418 arm64: zynqmp: Use keycode from input/input.h
Instead of hardcoding numbers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
52af7e3e81 arm64: zynqmp: Remove additional comments from dts files
Remove additional comments which were removed as the part of upstreaming.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:48 +02:00
Michal Simek
18a952ce7f arm64: zynqmp: Sync up license with mainline kernel
Mainline Linux kernel has adopted SPDX header license in a different
format then was used before. This patch is syncing it up.

Also update years in License text and remove Nathalie's email because it
is no longer valid.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
ba7b6dfae1 arm64: zynqmp: Use i2c-mux instead of i2cswitch instead
Based on review from mainline i2c-mux is standard name for i2c switches.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
a16e578639 arm64: zynqmp: Use maxim prefix for all maxim chips
Use vendor prefix for Maxim chips.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Michal Simek
680e9976c9 arm64: zynqmp: Sync alignment with mainline
Sync pcie and lpd_dma nodes with mainline version.
Incorrect locations are causing diff in statistics that's why
synchronizations are needed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:47 +02:00
Heinrich Schuchardt
f4cf153a48 efi_loader: correctly set the machine type in the PE header
The portable executable header has a field describing the machine type.
The machine type should match the binary. So on i386 we should use
IMAGE_FILE_MACHINE_I386 and on x86_64 we should use
IMAGE_FILE_MACHINE_AMD64. The actual value is issued by the objcopy
command invoked in scripts/Makefile.lib in depdendence of the value of
EFI_TARGET.

The value is used both for EFI_STUB and for EFI_LOADER.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-09 10:20:59 +02:00
Heinrich Schuchardt
23e7e6b6b9 MAINTAINERS: ZYNQMP: correct entries
Replace references to non-existent file.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Michal Simek
3d14228f1b MAINTAINERS: Fix zynqmp clock driver path
Fix c&p error from Zynq.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Michal Simek
7ad6d9a4ad arm: zynq: Handle ENXIO error return value properly
zynq_clk_get_rate() is also returning ENXIO which is not handled now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Anton Gerasimov
1d4fc9ef1f ARM: dts: zynq: Rename dts for Z-turn board
Makes naming in line with other Zynq boards.

Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Anton Gerasimov
6fb7b75673 ARM: dts: zynq: Update dts for Z-turn board
Delete devices implemented in PL, stylistic changes.

Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Alex Kiernan
3404a0b382 Cleanup CONFIG_VERSION_VARIABLE migration
CONFIG_VERSION_VARIABLE had already been mostly migrated to Kconfig,
but two headers still referenced it. Also set defaults so that
most of the defconfigs inherit the default rather than needing it
to be set explicitly.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
2018-04-08 23:05:58 -04:00
Alex Kiernan
d91013034a Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-08 23:05:58 -04:00
Alex Kiernan
9925f1dbc3 net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

  board/ti/am335x/built-in.o: In function `board_late_init':
  board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
  u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca4 ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Alex Kiernan
8cf2f3602e ti: am335x: Fix build when networking is disabled
When compiling without CONFIG_CLOCK_SYNTHESIZER (which is implied by
CONFIG_DRIVER_TI_CPSW for am335x_evm), exclude the network setup for
AM335x-ICEv2 to avoid link time failures:

  board/ti/am335x/board.c:683: undefined reference to `setup_clock_synthesizer'

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Alex Kiernan
a18d1064db usb: gadget: USB_ETHER requires network support
In order to compile the USB Ethernet gadget support we require that NET
is enabled, add that dependency here.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08 23:00:58 -04:00
Alex Kiernan
4f38592f9f ti: am335x: Fix bootargs when building without NET
If DHCP/PXE commands are disabled then the compilation fails due to
bootargs attempting to use them:

  include/config_distro_bootcmd.h:319:2: error: expected ‘}’ before ‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’

Ensure that if the command aren't enabled, we don't try and use them.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08 23:00:58 -04:00
Alex Kiernan
f02b8d1761 Migrate CONFIG_DRIVER_TI_CPSW to Kconfig
This converts CONFIG_DRIVER_TI_CPSW to Kconfig

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-08 23:00:58 -04:00
Mario Six
5bc0543df3 treewide: Convert CONFIG_HOSTNAME to a string option
CONFIG_HOSTNAME is defined as a "plain" preprocessor string, but every
use is couched by __stringify(...).

Hence, convert it to a proper string option.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08 18:31:09 -04:00
Mario Six
07dea2e737 treewide: Migrate CONFIG_FSL_ESDHC to Kconfig
Migrate the CONFIG_FSL_ESDHC option to Kconfig.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-04-08 18:31:05 -04:00