Commit graph

3331 commits

Author SHA1 Message Date
Ioana Ciornei
018bc358d3 net: fsl-mc: sync DPMAC MC APIs
Sync the Data Path MAC APIs to their latest form, this means the
layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
694dc0dd79 net: fsl-mc: sync DPBP MC APIs
Sync the Data Path Buffer Pool APIs to their latest form, this means the
layout of each command is created based on structures which clearly
describe the endianness of each field rather than some macros.

The command version is kept in place, meaning that the minimum MC
version accepted is not changed in any way.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Ioana Ciornei
f21d326be4 net: fsl-mc: remove unused MC APIs
There are multiple MC APIs which were added years ago but they are not
used at all in the u-boot source code. Remove all these APIs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15 17:58:53 +08:00
Eugen Hristev
89d8c56f44 net: rtl8169: add depends on PCI
The rtl8169 driver uses calls to dm_pci_bus_to_phys,
which are compiled under CONFIG_PCI.

Without CONFIG_PCI, this happens:

drivers/net/rtl8169.o: in function `rtl_recv_common':
drivers/net/rtl8169.c:555: undefined reference to `dm_pci_bus_to_phys'

It is only natural that this driver depends on CONFIG_PCI then.
The device does not work connected in another way anyway, and the driver
does not assume anything else at this moment.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-14 12:56:10 -04:00
Ioana Ciornei
c6caaafe8d net: ldpaa_eth: export DPNI and DPMAC counters through 'net stats'
Export the already existing DPNI and DPMAC counters through the newly
added callbacks.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Ioana Ciornei
22df08d82e net: ldpaa_eth: extend debug capabilities with DPMAC statistics
The ldpaa_eth driver already had a DPMAC statistics dump, this patch
extends the list of stats and adds a bit more structure to the code.

For a bit more context, the DPAA2 u-boot software architecture uses a
default network interface object - a DPNI - which, at runtime, will get
connected to the currently used DPMAC object.
Each time the .stop() eth callback is called, the DPMAC is destroyed
thus any previous counters will get lost.

As a preparation for the next patches, we add a software kept set of
DPMAC counters which will get updated before each destroy operation
takes place.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Ioana Ciornei
308d67e77d net: ldpaa_eth: extend debug capabilities with DPNI statistics
The ldpaa_eth driver already had a DPNI statistics dump, this patch
extends the list of stats and adds a bit more structure to the code.

For a bit more context, the DPAA2 u-boot software architecture uses a
default network interface object - a DPNI - which, at runtime, will get
connected to the currently used DPMAC object.
Each time the .stop() eth callback is called, the DPNI is reset to its
original state, including its counters.

As a preparation for the next patches, we add a software kept set of
DPNI counters which will get updated before each reset operation takes
place.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Ioana Ciornei
13ca5c2f56 net: ldpaa_eth: transform dpni_statistics from a struct to a union
In order to simplify code, dpni_statistics can be written as a union.
Using the raw accessors we can just loop through all the statistics from
a page without trying to access each an every one independently.
Make this change to a union.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-14 18:40:16 +08:00
Tom Rini
7da82de916 Xilinx changes for v2023.10-rc1
global:
 - Use proper U-Boot project name
 
 Fix sparse warnings in zynqmp-clk, zynqmp handoff, board
 
 cmd:
 - Cover incorrect 0 length entries
 
 Versal NET:
 - Add bootmode logic
 - Support SPP production version
 - Add loadpdi command
 
 ZynqMP:
 - Clear pmufw node command ID handling
 - Change power domain behavior around zynqmp_pmufw_node()
 - Fix zynqmp cmd return values and pmufw command
 - Fix R5 tcm init and modes
 
 mmc:
 - Sync Versal NET emmc DT binding
 
 pcie:
 - Add support for ZynqMP PCIe root port
 
 video:
 - Add support for ZynqMP DP
 
 tools:
 - Fix debug message in relocate-rela
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIcDaAAKCRDKSWXLKUoM
 IZmlAKCbiI7CS8ngZpbzOIuMveebNn1jYgCghyl20Bb2zWoNy+sIY2fPIO9mwx4=
 =wPDv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.10-rc1

global:
- Use proper U-Boot project name

Fix sparse warnings in zynqmp-clk, zynqmp handoff, board

cmd:
- Cover incorrect 0 length entries

Versal NET:
- Add bootmode logic
- Support SPP production version
- Add loadpdi command

ZynqMP:
- Clear pmufw node command ID handling
- Change power domain behavior around zynqmp_pmufw_node()
- Fix zynqmp cmd return values and pmufw command
- Fix R5 tcm init and modes

mmc:
- Sync Versal NET emmc DT binding

pcie:
- Add support for ZynqMP PCIe root port

video:
- Add support for ZynqMP DP

tools:
- Fix debug message in relocate-rela
2023-06-12 16:42:37 -04:00
Tom Rini
260d4962e0 Merge tag v2023.07-rc4 into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-12 14:55:33 -04:00
Michal Simek
1be82afa80 global: Use proper project name U-Boot
Use proper project name in comments, Kconfig, readmes.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-06-12 13:24:31 +02:00
Valentine Barshak
41a0cfd0c5 net: sh_eth: Fix RX error handling
In case RX error occurs, and the RD_RFE bit is set, the descriptor
is never returned back to the queue. Make sh_eth_recv_start return
zero length in this case so that the descriptor can be released
and pushed back to the list. Also return the more appropriate
-EAGAIN instead of -EINVAL if the descriptor is not ready yet.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Valentine Barshak
d49ba9c8d7 net: sh_eth: Workaround cache issues
U-Boot writes to RX packets when constructing replies.
This can cause stale cached data to be written to RX
buffer while we're receiving a packet. This causes RX
packet corruption because we invalidate the cache right
before processing the packet. Invalidate packet buffer
cache when preparing RX descriptor as well. This seems
to fix RX packet drops with high RX traffic.

While at it flush the descriptors right before enabling
RX/TX in sh_eth_tx_desc_init/sh_eth_rx_desc_init callbacks
when they are ready instead of flushing after allocation.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
92c312c734 net: sh_eth: Drop reset GPIO handling in favor of common code
The common code is now capable of handling reset GPIO associated
with PHY. Drop the local ad-hoc code in favor of common code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
5c80edb264 net: ravb: Drop reset GPIO handling in favor of common code
The common code is now capable of handling reset GPIO associated
with PHY. Drop the local ad-hoc code in favor of common code.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
3015ae5feb net: phy: Handle reset-delay-us/reset-post-delay-us properties
These two properties are used by various DTs in place of
current reset-assert-us/reset-deassert-us , handle both .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
68a4d15061 net: phy: Bind ETH_PHY uclass driver to each new PHY
In case a new PHY is created and DM_ETH_PHY is enabled, bind a
generic PHY driver from ETH_PHY uclass to the PHY to have a
matching DM representation of that PHY.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
495fc04b6d net: phy: Unpublish phy_connect_dev()
The phy_connect_dev() is legacy API, now that there are no users,
make it internal to phy.c and unpublish it from headers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
83434e249f net: sunxi_emac: Switch to new U-Boot PHY API
Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
b9b04f8c5f net: sh_eth: Switch to new U-Boot PHY API
Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
8f5abff522 net: pch_gbe: Switch to new U-Boot PHY API
Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
8869a8883b net: ethoc: Switch to new U-Boot PHY API
Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
7ff881a69f net: ave: Switch to new U-Boot PHY API
Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
fd5910288f net: altera_tsa: Switch to new U-Boot PHY API
Use new U-Boot phy_connect() API which also supports fixed PHYs.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:05 +02:00
Marek Vasut
06173ef643 net: eth-phy: staticize eth_phy_reset()
The eth_phy_reset() is not used outside of this file, staticize it.
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-06-10 13:34:04 +02:00
Tom Rini
41e289bb1f arm: Remove ti816x_evm board and ti816x SoC support
This platform is currently unmaintained and untested, so remove it.
Further, as it is the only TI816X SoC example, remove related files as
well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-31 10:11:46 -04:00
Tom Rini
0a9a4384c1 Merge tag 'u-boot-rockchip-20230509' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Rockchip NFC driver update and dev addr pointer api update;
- use standard dr_mode for usb driver;
- rock pi boards dts update;
- Add rk3566 Anbernic boards;
- Misc fixes for drivers;
2023-05-09 12:45:49 -04:00
Johan Jonker
320a1938b6 drivers: use devfdt_get_addr_index_ptr when cast to pointer
The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
devfdt_get_addr_index_ptr instead of the devfdt_get_addr_index function
in the various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-06 17:28:18 +08:00
Johan Jonker
a12a73b664 drivers: use dev_read_addr_ptr when cast to pointer
The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_ptr instead of the dev_read_addr function in the
various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-06 17:28:18 +08:00
Johan Jonker
e5822ecba2 drivers: use dev_read_addr_index_ptr when cast to pointer
The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU
can expect 64-bit data from the device tree parser, so use
dev_read_addr_index_ptr instead of the dev_read_addr_index function
in the various files in the drivers directory that cast to a pointer.
As we are there also streamline the error response to -EINVAL on return.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-06 17:28:18 +08:00
Stefan Herbrechtsmeier
1a3af267c0 net: phy: Request rgmii-id phy reset gpio as output
Request the reset gpio of the rgmii-id phy as output to be consistent
with the eth-phy-uclass driver.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
2023-05-05 18:03:18 -04:00
Eugen Hristev
bcbb64b199 net: rtl8169: add minimal support for 8125B variant
Add minimal support for 8125B version.
Changes are based on the Linux driver.
Tested on Radxa Rock 5B Rk3588 board.

Connection to a laptop worked fine in 100 Mbps mode.
1000 Mbps mode is not working at the moment.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:59:20 -04:00
Nishanth Menon
0207403eeb net: phy: dp83867: Explicitly check against sgmii
dp83867 driver only supports sgmii and not all the newer protocols.
Drop the usage of the generic phy_interface_is_sgmii function and just
matchup to the specific mode supported.

Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Suggested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/all/b82ac325-4818-8e72-054b-640268dbf806@mailbox.org/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Rasmus Villemoes
0b99afec9c phy: realtek: don't duplicate genphy_startup
rtl8211e_startup() is an exact copy of genphy_startup(). Use that
instead of duplicating it.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-05-05 17:48:44 -04:00
Rasmus Villemoes
8c0ed61390 phy: broadcom: don't duplicate genphy_startup
Functionally, bcm_cygnus_startup() is an exact copy of
genphy_startup().

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-05-05 17:48:44 -04:00
Stefan Herbrechtsmeier
2900342961 net: phy: gmii2rgmii: Support external rgmii-id phy
Read the phy mode of the external phy from the device tree if available
and check that it is a RGMII variant.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2023-05-05 17:48:44 -04:00
Elmar Psilog
96d58ecac8 Let the EQoS in imx8mp handle fixed-phy too.
Without that patch it lost track to the node to scan
speed and duplex.
Patch was created by Marek Vasut, just tested by me.

Signed-off-by: Elmar Psilog <epsi@gmx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2023-05-05 17:48:37 -04:00
Ioana Ciornei
8491a7e4ed drivers: net: fsl-mc: fix MAC address fixup procedure
In the process of adopting CONFIG_DM_ETH on the DPAA2 based platforms,
interfaces which were previously defined as "xgmii" were transitioned to
be defined as "xfi" in the DTS.
See the commit below for reference:
commit 87274918f2 ("arm: dts: ls2088ardb: add DPMAC and PHY nodes")

Then Vladimir's commit replaced all occurrences of "xfi" with
"10gbase-r" in an effort to make U-Boot work with the same device tree
as Linux.
commit 77b11f7604 ("net: replace the "xfi" phy-mode with "10gbase-r"")

These changes to the phy_interface_t of an Ethernet port meant that the
mc_fixup_mac_addrs() function was no longer capable to properly fixup
the MAC addresses. The problem arises from the fact that the hardcoded
information about an interface (wriop_get_enet_if()) was no longer
matching any actual device.

For example, the function tried to search for "DPMAC1@xgmii1" by name
using eth_get_dev_by_name() when only "DPMAC1@10gbase-r" was available.

This function removes the need to rely on the hardcoded information by
iterating through all the UCLASS_ETH devices which are DPAA2 and request
a fixup for each of them.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 13:41:55 -04:00
Ioana Ciornei
3f1983d460 drivers: net: ldpaa: export driver name and API to get DPMAC id
Export the ldpaa_eth_get_dpmac_id() function so that it can be used from
other drivers, especially by fsl-mc which will need it the next patch.
Also, create a macro for the Ethernet ldpaa driver name and export it as
well.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
2023-05-05 13:41:55 -04:00
Tim Harvey
1416b80de4 net: ksz9477: add port_probe function to config phy
Add a port_probe function to configure the phy. This leads to
earlier link negotiation so the port is more likely to be ready
when used.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 13:41:55 -04:00
Tim Harvey
2b7252953c net: ksz9477: remove unnecessary variable
We don't do anything useful with the master dev, so remove the variable.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 13:41:55 -04:00
Tim Harvey
38482d6596 net: ksz9477: remove unnecessary dsa_set_tagging call
packet tagging is not used for this driver so we do not need to
call dsa_set_tagging.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 13:41:55 -04:00
Phong Hoang
07679b1172 net: rswitch: Add Renesas Ethernet Switch
This patch adds Ethernet Switch support that found on R-Car S4
(r8a779f0) SoC. This is extracted from multiple patches from
downstream BSP, with additional rework of the network device
registration.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Marek: Rework the driver to support all ports via subdrivers.
        Split the driver up, add generic PHY framework support.
	Generic code clean ups.]
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-16 16:18:29 +02:00
Samuel Holland
93f93fe4cd net: sun8i-emac: Remove the SoC variant ID
Now that all differences in functionality are covered by individual
flags, remove the enumeration of SoC variants.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-12 00:17:21 +01:00
Samuel Holland
3cfb1e6914 net: sun8i-emac: Use common syscon setup for R40
While R40 puts the EMAC syscon register at a different address from
other variants, the relevant portion of the register's layout is the
same. Factor out the register offset so the same code can be shared
by all variants. This matches what the Linux driver does.

This change provides two benefits beyond the simplification:
 - R40 boards now respect the RX delays from the devicetree
 - This resolves a warning on architectures where readl/writel
   expect the address to have a pointer type, not phys_addr_t.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-12 00:17:21 +01:00
Samuel Holland
0e148342f7 net: sun8i-emac: Add a flag for the internal PHY switch
Describe this feature instead of using the SoC ID.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-12 00:17:21 +01:00
Samuel Holland
c5ac4b160f net: sun8i-emac: Add a flag for RMII support
Describe this feature instead of using the SoC ID.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-12 00:17:21 +01:00
Samuel Holland
c86d47328e net: sun8i-emac: Add a structure for variant data
Currently, EMAC variants are distinguished by their identity, but this
gets unwieldy as more overlapping variants are added. Add a structure so
we can describe the individual feature differences between the variants.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-12 00:17:20 +01:00
Tom Rini
965f74b5b3 Merge branch 'master_sh/gen4/initial' of https://source.denx.de/u-boot/custodians/u-boot-sh
- Initial R-Car Generation 4 support
2023-04-07 15:55:50 -04:00
Hai Pham
c2fbaaf3dc net: ravb: Add R-Car Gen4 support
Add support for R-Car Gen4 SoCs and a matching DT compatible.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Drop SoC specific compatible, use RCAR_64 Kconfig symbol, update commit message]
2023-04-07 17:13:28 +02:00
Marek Vasut
b6fcab0728 net: phy: marvell10g: Adapt Marvell 10G PHY driver from Linux
Pull Marvell 10G PHY driver from Linux 6.1.y as of commit
d6d29292640d3 ("net: phy: marvell10g: select host interface configuration")
and heavily adapt to match U-Boot PHY framework. Support for
hwmon is removed as is much other functionality which could
not be tested, this results in much simpler driver which can
only bring the PHY up and set MAC type.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
87b7502824 net: phy: Add phy_modify_mmd() and phy_modify_mmd_changed() from Linux
Add phy_modify_mmd()/phy_modify_mmd_changed() from Linux 5.1.y as of commit
b8554d4f7288f ("net: phy: add register modifying helpers returning 1 on change")
This is used by the upcoming Marvell 10G PHY driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
bf3dabb7de net: phy: marvell: Import and use marvell_phy.h from Linux
Import marvell_phy.h from Linux 5.14.y as of commit
a5de4be0aaaa6 ("net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340")
and use it in marvell PHY driver instead of current ad-hoc macros.
Two of the PHY IDs are unknown to Linux, 88E1149S and 88E1680, for
those two, only sync the length of the hexadecimal number to 8 digits.

No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:21:37 +02:00
Marek Vasut
75d28899e3 net: phy: Synchronize PHY interface modes with Linux
Synchronize PHY interface modes with Linux next 6.2.y commit:
0194b64578e90 ("net: phy: improve phy_read_poll_timeout")

Retain LX2160A/LX2162A PHY modes as those are not yet supported
by the Linux kernel, but isolate those with ifdeffery.

Isolate NCSI which are also not supported by Linux kernel. Note
that the ifdeffery cannot be avoided with IS_ENABLED() here due
to compilation of the entire conditional, which would fail in
case NCSI symbols are not available.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:20:53 +02:00
Marek Vasut
166ea49750 net: mvpp2: Replace PHY_INTERFACE_MODE_SFI with 5GBASER/10GBASER/XAUI
Replace PHY_INTERFACE_MODE_SFI with PHY_INTERFACE_MODE_5GBASER,
PHY_INTERFACE_MODE_10GBASER and PHY_INTERFACE_MODE_XAUI to match
Linux PHY interface modes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:20:53 +02:00
Marek Vasut
6b1948d81a net: mvpp2: Drop PHY_INTERFACE_MODE_SGMII_2500 support
This mode does not seem to be well defined and used anywhere, remove support for it.
Based on discussion:
- 1000baseX does c37 AN of duplex+pause
- SGMII does AN of duplex+pause+speed, at lower speed bytes are repeated 10x/100x
- 2500baseX does not do AN, or does very different c73 AN
- SGMII 2500 behavior is unclear

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:20:53 +02:00
Marek Vasut
9461d73de9 net: phy: Only call phy_init() on systems needing manual relocation
The phy_init() is now used only to perform manual relocation of PHY
driver callbacks. Wrap it in ifdeffery and only call it on systems
which still require manual relocation, i.e. m68k .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
c878e70beb net: phy: Re-inline phy_drv_reloc()
Wrap phy_drv_reloc() back into phy_init() to reduce ifdeffery,
since phy_drv_reloc() is now called only from one call site.
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
7da03bbc57 net: phy: Drop unused phy_register()
This function is no longer used, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
8728d4c032 net: phy: Drop static phy_drivers list
The static phy_drivers list is superseded by linker list of struct phy_drivers
now that all drivers have been converted to the later. Drop the phy_drivers
list as well as list_head from struct phy_driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
20bd8e4fcb net: phy: gen10g: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
f7053296cb net: phy: genphy: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:51 +02:00
Marek Vasut
53ef8d79f2 net: phy: xilinx-gmii2rgmii: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
81a8728c83 net: phy: ncsi: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
7f4e6c2ae1 net: phy: fixed: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
5c359aa712 net: phy: mscc: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
330d64f5a0 net: phy: intel-xway: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
6620b9204d net: phy: xilinx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
fb5cf1bb42 net: phy: vitesse: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
5b777fe527 net: phy: ti: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

This particular PHY driver is slightly more spread out across additional
source files. Since the phy_register() calls are no longer necessary, all
the registration calls across those source files is dropped. Furthermore,
the Makefile can now be updated to only compile generic TI PHY support if
matching Kconfig symbol is enabled and the ifdeffery in the generic TI PHY
driver can be dropped.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
787a67f471 net: phy: teranetics: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
2ea350c466 net: phy: smsc: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
f2e0be396e net: phy: realtek: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:50 +02:00
Marek Vasut
1965f2aa65 net: phy: nxp-tja11xx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
d1296d44de net: phy: nxp-c45-tja11xx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
390e3fcd4e net: phy: natsemi: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
3b96dc7513 net: phy: meson-gxl: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
6b5eea7508 net: phy: ksz90x1: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
f282e32d0a net: phy: ksz8xxx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
9010be953e net: phy: marvell: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
f10c893815 net: phy: lxt: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
b20c53a93f net: phy: et1011c: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
abdbfad25c net: phy: mv88e61xx: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
7e9ce5adf6 net: phy: davicom: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:49 +02:00
Marek Vasut
579f359269 net: phy: cortina: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
227650f0e7 net: phy: ca_phy: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
c00f3f826f net: phy: broadcom: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
761e4060fe net: phy: b53: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
fba31ab92c net: phy: atheros: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
a5fbc10560 net: phy: aquantia: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
4de8644504 net: phy: adin: Convert to U_BOOT_PHY_DRIVER()
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call.

Converted using sed
"s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {"

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
7940a93eb9 net: phy: Iterate over both registered PHYs and struct phy_driver linker list
Introduce U_BOOT_PHY_DRIVER() macro which is used to add struct phy_driver
into a new linker list section containing all compiled in struct phy_driver
drivers. This is so far empty until PHY drivers are converted over to this
macro.

Iterate over both drivers registered using soon to be legacy phy_register()
as well as drivers in the new linker list when looking up a suitable PHY
driver. This way, PHY drivers can be converted over to the new macro one
driver at a time.

The relocation of callbacks for linker list based drivers now happens in
phy_init() call as the drivers are available at that point in time, and
phy_register() is not called for those drivers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
9d5a38c214 net: phy: Factor manual relocation into separate function
Create separate function to implement manual relocation of PHY driver
functions and make use of that function. This is a preparatory patch
for introduction of PHY driver definition using linker lists.

No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
d1569689c6 net: phy: teranetics: Staticize PHY driver entries
These struct phy_driver ... instances are local to this source code
file, staticize them. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
97c50ab8db net: phy: cortina: Staticize PHY driver entries
These struct phy_driver ... instances are local to this source code
file, staticize them. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:18:48 +02:00
Marek Vasut
3309c58a0e net: phy: ca_phy: Staticize PHY driver entries
These struct phy_driver ... instances are local to this source code
file, staticize them. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07 14:17:24 +02:00
Marek Vasut
5914bec3f0 net: phy: aquantia: Staticize PHY driver entries
These struct phy_driver ... instances are local to this source code
file, staticize them. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07 14:15:07 +02:00
Marek Vasut
4bdc3524d7 net: fec_mxc: Add board_interface_eth_init() for i.MX8M Mini/Nano/Plus
Implement common board_interface_eth_init() and call it from the FEC
driver to configure IOMUXC GPR[1] register according to the PHY mode
obtained from DT. This supports all three interface modes supported by
the i.MX8M Mini/Nano/Plus FEC and supersedes the current board-side
configuration of the same IOMUX GPR[1] duplicated in the board files.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-03-30 13:47:04 +02:00
Marek Vasut
80a34e4008 net: fec_mxc: Add ref clock setup support for i.MX8M Mini/Nano/Plus
The FEC ref clock frequency on i.MX8M Mini/Nano/Plus was so far configured
via ad-hoc board code. Replace that with DM clock clk_set_rate() instead.
This way, the driver claims all its required clock and sets the ref clock
rate, without any need of architecture specific register fiddling.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-03-30 13:47:04 +02:00
Marek Vasut
f9e950b9bf net: dwc_eth_qos: Add board_interface_eth_init() for i.MX8M Plus
Implement common board_interface_eth_init() and call it from the DWMAC
driver to configure IOMUXC GPR[1] register according to the PHY mode
obtained from DT. This supports all three interface modes supported by
the i.MX8M Plus DWMAC and supersedes current board-side configuration
of the same IOMUX GPR[1] duplicated in the board files.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
2023-03-30 13:47:04 +02:00