Some blobs are actually not necessary for the board to work correctly. Add
a property to allow this to be indicated. Missing optional blobs do not
cause a build failure.
Signed-off-by: Simon Glass <sjg@chromium.org>
OP-TEE has a format with a binary header that can be used instead of the
ELF file. With newer versions of OP-TEE this may be required on some
platforms.
Add support for this in binman. First, add a method to obtain the ELF
sections from an entry, then use that in the FIT support. We then end up
with the ability to support both types of OP-TEE files, depending on which
one is passed in with the entry argument (TEE=xxx in the U-Boot build).
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a function which checks whether data is in ELF format or not. This
will be used by binman to check this for entries.
Signed-off-by: Simon Glass <sjg@chromium.org>
Support entries which can be optional depending on their contents. This
allows special entry types which appear in the image only when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Several etypes have this reference in their documentation. Now that we are
using rST, link to the section directly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
At present only the image (which is a section) has a filename. Move this
implementation to the entry_Section class so that any section can have a
filename. With this, the section data is written to a file.
This allows parts of an image to be written, along with the entire image.
Make a note that this can be used to include the contents of a section in
one image in another (later) image.
Signed-off-by: Simon Glass <sjg@chromium.org>
These are documented in various several sections. Add a new section that
mentions them all in one place so it is easier to see what environment
variables can be used to control U-Boot's use of binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
At present binman returns success when told to handle missing/faked blobs
or missing bintools. This is confusing since in fact the resulting image
cannot work.
Use exit code 103 to signal this problem, with a -W option to convert
it to a warning.
Rename the flag to --ignore-missing since it controls bintools also.
Add documentation about exit codes while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
This reverts commit daa2da754a.
This commit is not needed anymore since the btool_ prefix is
automatically stripped by bintool.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The binary is looked on the system by the suffix of the packer class.
This means binman was looking for btool_gzip on the system and not gzip.
Since a btool can have its btool_ prefix missing but its module and
binary presence on the system appropriately found, there's no need to
actually keep this prefix after listing all possible btools, so let's
remove it.
This fixes gzip btool by letting Bintool.find_bintool_class handle the
missing prefix and still return the correct class which is then init
with gzip name instead of btool_gzip.
Additionally, there was an issue with the cached module global variable.
The variable only stores the module and not the associated class name
when calling find_bintool_class.
This means that when caching the module on the first call to
find_bintool_class, class_name would be set to Bintoolbtool_gzip but the
module_name gzip only, adding the module in the gzip key in the module
dictionary. When hitting the cache on next calls, the gzip key would be
found, so its value (the module) is used. However the default class_name
(Bintoolgzip) is used, failing the getattr call.
Instead, let's enforce the same class name: Bintool<packer>, whatever
the filename it is contained in.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In some cases the ELF version of SPL builds may be packaged, rather
than a binary .bin file. Add support for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This feature is used by several etypes and we plan to add more that use
it. Make symbol writing a feature of the base class to reduce the code
duplication.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().
Rename it to resolve this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
Adding support to symlink an image packaged using binman.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This is not needed and we should avoid typedefs. Use the struct instead
and rename it to indicate that it really is a legacy struct.
Signed-off-by: Simon Glass <sjg@chromium.org>
A binary download is not great, since it depends on libraries being
present in the system. Build futility from source instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
mkimage entry currently creates a file whose name is derived from the
section name containing said entry.
Let's allow the user to define a filename for the mkimage-generated
binary by using the 'filename' DT property.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some image types handled by mkimage require the datafiles to be passed
independently (-d data1:data2) for specific handling of each. A
concatenation of datafiles prior to passing them to mkimage wouldn't
work.
That is the case for rkspi for example which requires page alignment
and only writing 2KB every 4KB.
This adds the ability to tell binman to pass the datafiles without
prior concatenation to mkimage, by adding the multiple-data-files
boolean property to the mkimage node.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Upstream bzip2 1.0.x actually is stuck when running bzip2 -V and
redirecting the output. This is fixed in Debian for about a decade
already in
https://git.launchpad.net/ubuntu/+source/bzip2/tree/debian/patches/20-legacy.patch?h=ubuntu/jammy
and in bzip2 1.1.x (no release yet, see
65179284ce
).
Fedora notably does not have such a patch.
Since bzip2 --help actually prints the version number too, let's use it
instead so that binman works fine on (hopefully) all distributions.
Fixes: 45aa279800 ("binman: Add bzip2 bintool")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bintool.version can now be passed the binary argument to return the
version text, so there's no need to override it in futility anymore.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bintool.version can now be passed the binary argument to return the
version text, so there's no need to override it in fiptool anymore.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The code to check the version is very similar between binaries, the most
likely only needed variables are the regex to find the version (already
supported) and the args to pass to the binary so that it prints this
version (e.g. --version, -V or similar).
Let's make it a parameter of Bintool so that code duplication can be
avoided for simple changes.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Bintool.version already contains everything required to get the version
out of mkimage binary so let's not override it with its own
implementation.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bintool.version already contains everything required to get the version
out of lz4 binary so let's not override it with its own implementation.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Version checking has nothing specific to compression/decompression tools
so let's move it to the Bintool class.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The binary is looked on the system by the suffix of the packer class.
This means binman was looking for btool_gzip on the system and not gzip.
Therefore, let's pass "gzip" as the name so that it can be found and
used.
Fixes: 0f369d7992 ("binman: Add gzip bintool")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tests should be in order of the test-file numbers. Sort the tests
according to the test-file numbers and rework the test-file numbers to
eliminate duplicate numbers.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add zstd bintool to binman to support on-the-fly compression.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add xz bintool to binman to support on-the-fly compression.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add lzop bintool to binman to support on-the-fly compression.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add gzip bintool to binman to support on-the-fly compression of Linux
kernel images and FPGA bitstreams. The SPL basic fitImage implementation
supports only gzip decompression.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Rename the module and support this, since gzip.py is a system module:
Signed-off-by: Simon Glass <sjg@chromium.org>
Add bzip2 bintool to binman to support on-the-fly compression.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a bintools base class for packers which compression / decompression
entry contents.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Dropped dead/untested code in version():
Signed-off-by: Simon Glass <sjg@chromium.org>
Add common test functions to test all supported compressions.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Handle missing compression tools by returning empty data and record
missing bintool.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Move management of the bintool to compress and decompress data into the
entry class and add the bintool to the list of required bintools.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Select the lz4 and lzma_alone bintools in cbfs_util class to centralize
the supported compression algorithm evaluation inside the class and over
multiple classes.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Move compression bintools (packer) creation into test setup to reuse
bintool objects between tests.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Put comp_util import back in, since it is still needed here:
Signed-off-by: Simon Glass <sjg@chromium.org>
Remove the obsolete compressed data header handling from the utilities
to compress and decompress data. The header is uncommon, not supported
by U-Boot and incompatible with external compressed artifacts.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Disable the compressed data header of the utilities to compress and
decompress data. The header is uncommon, not supported by U-Boot and
incompatible with external compressed artifacts.
The header was introduced as part of commit eb0f4a4cb4 ("binman:
Support replacing data in a cbfs") to allow device tree entries to be
larger than the compressed contents.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add an optional length header attribute to the device tree blob entry
class based on the compressed data header from the utilities to compress
and decompress data.
If needed the header could be enabled with the following
attribute beside the compress attribute:
prepend = "length";
The header was introduced as part of commit eb0f4a4cb4 ("binman:
Support replacing data in a cbfs") to allow device tree entries to be
larger than the compressed contents. Regarding the commit "this is
necessary to cope with a compressed device tree being updated in such a
way that it shrinks after the entry size is already set (an obscure
case)". This case need to be fixed without influence any compressed data
by itself.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a DecompressData function to entry class to allow override in child
classes and to centralize the compress and decompress in a single class.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Check only section data instead of the rest of the image in multi
section test.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Collect and thereby initialize bintools before any usage but after
generation of entries. This is needed to handle bintools for compress
and decompress like other bintools.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Forward AddBintools calls to base class to collect bintools of base
class.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Forward AddBintools calls to sub entries in cbfs_util to collect
bintools of sub entries.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Avoid duplicate entries in the list of bintools used by the image and
the list of missing bintools.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Skip tests which requires python elftools if the tool is not available.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At present the collections etype only works with entries in the same
section. This can be limiting, since in some cases the data may be inside
a subsection, e.g. if there are alignment constraints.
Add a function to find the entries in an etype and have it search
recursively. Make use of this for mkimage also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Also control over what goes in the file passed with -n using a separate
imagename subnode. This can include a section or any other entry type.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some image types use the -n parameter to pass in the data file. Add
support for this, with a new property.
Signed-off-by: Simon Glass <sjg@chromium.org>
Expand this a little to make things clearer. Also drop the invalid
entry arg.
Series-changes 2
- Make it clear that -d data is concatenated/collected by binman
- Fix mulitple typoe
- Reword a sentence for grammar
Signed-off-by: Simon Glass <sjg@chromium.org>
The testReplaceSectionSimple() test is the only one which expects failure.
It looks odd in the output and takes time to glance at it to see that all
is in fact well. Also it does not check that the right exception is
generated.
Use the more common (in binman) approach of checking for an exception.
Signed-off-by: Simon Glass <sjg@chromium.org>
Since this is implemented as a section, it should really be split into
several functions, one to read the node and one to read the entries. Do
this so that it matches how Entry_section works.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some new entries are likely to have required properties. Support this in a
standard way, with a list of required properties which can be set up by
base classes. Check for missing properties when the entry is read.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present fake files from a previous build appear to be real files for
a subsequent build, since they sit in the output directory.
This can cause problems, since binman may need to parse the file, e.g.
with the Intel description.bin files.
Fix this by putting them in a 'binman-fake' subdirectory. Keep a track
of the fake filename so we only create it once. Subsequent builds will
still see that the file is missing and mark it as fake.
Update a few tests to check the behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is an attempt to answer the comments provided by Xavier [1].
[1] https://lore.kernel.org/all/Yulcol7HpTHtjXTX@begut/
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add references in the documentation for each entry type, so we can refer
to them from other documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Currently the fitImage data area is resized in 1 kiB steps. This works
when bundling smaller images below some 1 MiB, but when bundling large
images into the fitImage, this make binman spend extreme amount of time
and CPU just spinning in pylibfdt FdtSw.check_space() until the size
grows enough for the large image to fit into the data area. Increase
the default step to 64 kiB, which is a reasonable compromise -- the
U-Boot blobs are somewhere in the 64kiB...1MiB range, DT blob are just
short of 64 kiB, and so are the other blobs. This reduces binman runtime
with 32 MiB blob from 2.3 minutes to 5 seconds.
The following can be used to trigger the problem if rand.bin is some 32 MiB.
"
/ {
itb {
fit {
images {
test {
compression = "none";
description = "none";
type = "flat_dt";
blob {
filename = "rand.bin";
type = "blob-ext";
};
};
};
};
};
configurations {
binman_configuration: config {
loadables = "test";
};
};
};
"
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Binman lets us declare symbols in SPL/TPL that refer to other entries in
the same binman image as them. These symbols are filled in with the
correct values while binman assembles the images, but this is done
in-memory only. Symbols marked as optional can be filled with
BINMAN_SYM_MISSING as an error value if their referred entry is missing.
However, the unmodified SPL/TPL binaries are still available on disk,
and can be used by people. For these files, nothing ensures that the
symbols are set to this error value, and they will be considered valid
when they are not.
Empirically, all symbols show up as zero in a sandbox_vpl build when we
run e.g. tpl/u-boot-tpl directly. On the other hand, zero is a perfectly
fine value for a binman-written symbol, so we cannot say the symbols
have wrong values based on that.
Declare a magic symbol that binman always fills in with a fixed value.
Check this value as an indicator that symbols were filled in correctly.
Return the error value for all symbols when this magic symbol has the
wrong value.
For binman tests, we need to make room for the new symbol in the mocked
SPL/TPL data by extending them by four bytes. This messes up some test
image layouts. Fix the affected values, and check the magic symbol
wherever it makes sense.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Enabling CONFIG_BINMAN makes binman run after a build to package any
images specified in the device-tree. It also enables a mechanism for
SPL/TPL to declare and use special linker symbols that refer to other
entries in the same binman image. A similar feature that gets this info
from the device-tree exists for U-Boot proper, but it is gated behind a
CONFIG_BINMAN_FDT unlike the symbols.
Confusingly, CONFIG_SPL/TPL_BINMAN_SYMBOLS also exist. These configs
don't actually enable/disable the symbols mechanism as one would expect,
but declare some symbols for U-Boot using this mechanism.
Reuse the BINMAN_SYMBOLS configs to make them toggle the symbols
mechanism, and declare symbols for the U-Boot phases in a dependent
BINMAN_UBOOT_SYMBOLS config. Extend it to cover symbols of all phases.
Update the config prompt and help message to make it clearer about this.
Fix binman test binaries to work with CONFIG_IS_ENABLED(BINMAN_SYMBOLS).
Co-developed-by: Peng Fan <peng.fan@nxp.com>
[Alper: New config for phase symbols, update Kconfigs, commit message]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The python tools' test utilities handle printing test results, but the
output is quite bare compared to an ordinary unittest run. Delegate
printing the results to a unittest text runner, which gives us niceties
like clear separation between each test's result and how long it took to
run the test suite.
Unfortunately it does not print info for skipped tests by default, but
this can be handled later by a custom test result subclass. It also does
not print the tool name; manually print a heading that includes the
toolname so that the outputs of each tool's tests are distinguishable in
the CI output.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
'make tests' fails on Ubuntu 22.04 with:
binman: ./tools/binman/binman:12: DeprecationWarning:
The distutils package is deprecated and slated for removal in Python 3.12.
Use setuptools or check PEP 632 for potential alternatives
from distutils.sysconfig import get_python_lib
./tools/binman/binman:12: DeprecationWarning:
The distutils.sysconfig module is deprecated, use sysconfig instead
from distutils.sysconfig import get_python_lib
<unittest.result.TestResult run=428 errors=0 failures=4>
AssertionError: 0 != 468
As we don't use Ubuntu 16.04 for our CI anymore drop the import.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Binman interfaces allow attempts to replace any entry in the image with
arbitrary data. When trying to replace sections, the changes in the
section entry's data are not propagated to its child entries. This,
combined with how sections rebuild their contents from its children,
eventually causes the replaced contents to be silently overwritten by
rebuilt contents equivalent to the original data.
Add a simple test for replacing a section that is currently failing due
to this behaviour, and mark it as an expected failure. Also, raise an
error when replacing a section instead of silently pretending it was
replaced.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
A previous patch fixes binman to correctly extract FIT subentries. This
makes it easier to test replacing these entries as we can write tests
using an existing helper function that relies on extracting the replaced
entry.
Add tests that replace leaf entries in FIT subsections with data of
various sizes. Replacing the subsections or the whole FIT section does
not work yet due to the section contents being re-built from unreplaced
subentries' data.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When reading images from a file, each entry's data is read from its
parent section as specified in the Entry.Create() call that created it.
The FIT entry type has been creating its subentries under its parent
(their grandparent), as creating them under the FIT entry resulted in an
error until FIT was converted into a proper section.
FIT subentries have their offsets relative to the FIT section, and
reading those offsets in the parent section results in wrong data. The
subentries rightfully belong under the FIT entries, so create them
there. Add tests checking that we can extract the correct data for a FIT
entry and its subentries.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Binman FIT entry nodes describe their subentries in an 'images' subnode,
same as how they would be written for the mkimage executable. The entry
type initially manually managed its subentries keyed by their node paths
relative to its base node. It was later converted to a proper section
while still keeping the same keys for subentries.
These subentry keys of sections are used as path fragments, so they must
not contain the path separator character '/'. Otherwise, they won't be
addressable by binman extract/replace commands. Change these keys from
the '/images/foo' forms to the subentry node names. Extend the simple
FIT tests to check for this.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
When an image has the 'allow-repack' property, binman includes the
original offset and size properties from the image description in the
fdtmap. These are later used as the packing constraints when replacing
entries in an image, so other unconstrained entries can be freely
positioned.
Replacing an entry in an image without 'allow-repack' (and therefore the
original offsets) follows the same logic and results in entries being
merely concatenated. Instead, skip resetting the calculated offsets and
sizes to the missing originals for these images so that every entry is
constrained to its existing offset/size.
Add tests that replace an entry with smaller or equal-sized data, in an
image that doesn't allow repacking. Attempting to do so with bigger-size
data is already an error that is already being tested.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Binman entries can use other executables to compute their data, usually
in their ObtainContents() methods. Subclasses of Entry_section would use
bintools in their BuildSectionData() method instead, which is called
from several places including their Pack().
These binary tools are resolved correctly while building an image from a
device-tree description so that they can be used from these methods.
However, this is not being done when replacing entries in an image,
which can result in an error as the Pack() methods attempt to use them.
Collect and resolve entries' bintools also when replacing entries to fix
Pack() errors. Add a way to mock bintool usage in the testing entry type
and tests that check bintools are being resolved for such an entry.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Binman can embed a copy of the image description into the images it
builds as a fdtmap entry, but it omits the /binman/<image-name> prefix
from the node paths while doing so. When reading an already-built image
file, entries are reconstructed using this fdtmap and their associated
nodes still lack that prefix.
Some entries like fit and vblock create intermediate files whose names
are based on an entry unique name. This name is constructed from their
node's path by concatenating the parents with dots up to the binman
node, e.g. /binman/image/foo/bar becomes 'image.foo.bar'.
However, we don't have this /binman/image prefix when replacing entries
in such an image. The /foo/bar entry we read when doing so erroneously
has the unique name of '/.foo.bar', causing permission errors when the
entry attempts to create files based on that.
Fix the unique-name generation by stopping at the '/' node like how it
stops at the binman node. As the unique names are used as filenames, add
tests that check if they're safe to use as filenames.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The conversion to bintools broke the invocation of the utility, since
the arguments are not correct. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Adds the support of the pre-load header with the image signature
to binman.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Some boards need to load an ELF file using the 'loadables' property, but
the file has segments at different memory addresses. This means that it
cannot be supplied as a flat binary.
Allow generating a separate node in the FIT for each segment in the ELF,
with a different load address for each.
Also add checks that the fit,xxx directives are valid.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The current implementation sets up the FIT entries but then deletes the
'generator' ones so they don't appear in the final image.
This is a bit clumsy. We cannot build the image more than once, since the
generator entries are lost during the first build. Binman requires that
calling BuildSectionData() multiple times returns a valid result each
time.
Keep a separate, private list which includes the generator nodes and use
that where needed, to correct this problem. Ensure that the missing list
includes removed generator entries too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
It doesn't make sense to use 'subnode' as a function parameter since it
is just a 'node' so far as the function is concerned. Update two functions
to use 'node' instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add a new function to handling reporting errors within a particular
subnode of the FIT description. This can be used to make the format of
these errors consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Some warnings have crept in, so fix those that are easy to fix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
This should not be done in the constructor. Move it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
At present the entries are read twice, once by the entry_Section class
and once by the FIT implementation. This is harmless but can be confusing
when debugging. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Unfortunately mkimage gets upset with zero-sized files. Update the
ObtainContents() method to support specifying the size, if a fake blob is
created.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
On x86 devices having even a small amount of data can cause an overlap
between regions. For example, bayleybay complains when the intel-vga
region overlaps with u-boot-ucode:
ImagePos Offset Size Name
<none> 00000000 00800000 main-section
<none> ff800000 00000080 intel-descriptor
<none> ff800400 00000080 intel-me
<none> fff00000 00098f24 u-boot-with-ucode-ptr
<none> fff98f24 00001aa0 u-boot-dtb-with-ucode
<none> fff9a9d0 0002a000 u-boot-ucode
<none> fffb0000 00000080 intel-vga
...
It is safer to use an empty file in most cases. Add an option to set the
size for those uses that need it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
At present fake blobs are created but internally an empty blob is used.
Change it to use the contents of the faked file. Also return whether the
blob was faked, in case the caller needs to know that.
Add a TODO to put fake blobs in their own directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
This shadows the patman.tools library so rename it to avoid a pylint
warning.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
At present the fit implementation creates the output tree while
scanning the FIT description. Then it updates the tree later when the
data is known.
This works, but is a bit confusing, since it requires mixing the scanning
code with the generation code, with a fix-up step at the end.
It is actually possible to do this in two phases, one to scan everything
and the other to generate the FIT. Thus the FIT is generated in one pass,
when everything is known.
Update the code accordingly. The only functional change is that the 'data'
property for each node are now last instead of first, which is really a
more natural position. Update the affected test to deal with this.
One wrinkle is that the calculated properties (image-pos, size and offset)
are now added before the FIT is generated. so we must filter these out
when copying properties from the binman description to the FIT.
Most of the change here is splitting out some of the code from the
ReadEntries() implementation into _BuildInput(). So despite the large
diff, most of the code is the same. It is not feasible to split this patch
up, so far as I can tell.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Leave the 'expand' term for use by entry types which have an expanded
version of themselves. Rename this method to indicate that it generates
subentries.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The word 'expand' is used for entries which generate subentries. It is
also used for entries that can have an '_expanded' version which is used
to break out its contents.
Rather than talking about expanding an entry's size, use the term
'extending'. It is slightly more precise and avoids the above conflicts.
This change renders the old 'expand-size' property invalid, so add an
error check for that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Update the return value of this function, fix the 'create' typo and
update the documentation for clarity.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Suggested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
