Commit graph

151 commits

Author SHA1 Message Date
Tim Harvey
1b99103fba imx: ventana: SPL: only disable boot watchdog if Falcon mode
If not booting Falcon mode, leave the boot watchdog enabled as a work-around
for other non-resolved bootloader hangs.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31 17:23:46 +02:00
Robert P. J. Day
7ffe3cd62e Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUP
Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT:

  config OF_BOARD_SETUP
          bool "Set up board-specific details in device tree before boot"
          depends on OF_LIBFDT
          ...

remove superfluous tests of CONFIG_OF_LIBFDT when testing for
CONFIG_OF_BOARD_SETUP.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
[trini: Typo fix: s/ifdefi/ifdef/]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:16 -04:00
Tim Harvey
3c0fd17f61 imx: ventana: use EEPROM register for falcon boot mode
NAND+MMC env support costs 12KB in the SPL which is fairly expensive just
for the ability to specify whether or not to boot to uboot or directly
to linux. The Ventana boards have plenty of EEPROM storage so we will use
a byte there to signify if we should boot to the bootloader or to the OS.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Tim Harvey
a419352daf imx: ventana: gsc: remove dependence on env
remove dependence on getenv() by using global board info struct for model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24 15:01:43 +02:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Marek Vasut
18e02ffe5e arm: imx6: novena, gw_ventana: Fix use of pfuze100 bit definitions
The following patch changed the PFUZE100 swbst register bit definitions
and broke PMIC configuration on multiple boards, at least on the novena
and gw_ventana. This patch fixes it.

commit 8fa46350a4
Author: Peng Fan <Peng.Fan@freescale.com>
Date:   Fri Aug 7 16:43:45 2015 +0800

    power: regulator: add pfuze100 support

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Vagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Vagrant Cascadian <vagrant@aikidev.net>
Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2015-12-01 16:09:51 +01:00
Fabio Estevam
346d106d16 gw_ventana: Remove empty reset_cpu()
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2015-11-12 17:26:34 +01:00
Peng Fan
f20562e4c4 mx6: remove SYS_SOC from board Kconfig
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-09-13 10:37:29 +02:00
Peng Fan
f2ff834365 imx: mx6: ddr init MMDC according to ddr_type
To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:34:12 +02:00
Tim Harvey
c2fd3f5704 imx: ventana: skip mtdparts fixup if no flash
This avoids an error message on NAND-less boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
fdead4be6a imx: ventana: hang if board model could not be determined
If the EEPROM could not be read or is corrupt we always want to hang.
Note that an error message will have been displayed by read_eeprom in this
case.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
80d1a3ee72 imx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable
The fdt_file1 and fdt_file2 vars provide fallbacks for the fdt file loading
script. There is no need to allow the user to override these as if they
want to specify the fdt, they should do so in the first attempt which is
the fdt_file var.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
40c746758c imx: ventana: make model env var automatic and non-overridable
We want to model env var to always reflect what was in the EEPROM. There
is no point in allowing a user to override this.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
9a83a81545 imx: ventana: various board-specific GPIO config updates
- Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x)
- Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is
  done regardless of USB being initialized in bootloader
- Added usb_sel iomux/hwconfig for GW552x
- Fixed mezzanine DIO for GW54xx
- Fixed PANLEDR# for GW54xx
- Fixed dio iomux/hwconfig for GW552x
- Fixed dio iomux for GW551x
- removed redundant #define

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-06-01 09:48:23 +02:00
Tim Harvey
6122f0d556 imx: ventana: update README with Falcon mode documentation
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 14:24:18 +02:00
Tim Harvey
40e999ca71 imx: ventana: update README for micro-SD boot medium
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-26 14:21:35 +02:00
Tim Harvey
53940a5079 imx: ventana: config: enable Falcon mode
Falcon mode entails the SPL booting the OS directly instead of U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-21 19:07:17 +02:00
Tim Harvey
e06a03625d imx: ventana: add pmic_setup to SPL
We need to do any PMIC setup in the SPL if we are to bypass U-Boot for
falcon mode.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:04:44 +02:00
Tim Harvey
af1db4a390 imx: ventana: use stack relocation
Certain features we desire require a larger stack than is available by using
iRAM (most notably for us, env_mmc). Relocate the stack to DRAM so that
we can use these features.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-15 19:25:07 +02:00
Tim Harvey
ea7a3c446b imx: ventana: add GSC boot watchdog disable to SPL
If the SPL is to be used for Falcon mode then we need to make sure the SPL
disable the GSC boot watchdog.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:26 +02:00
Tim Harvey
c4b44d7699 imx: ventana: add gpio setup to SPL
If the SPL is to be used for Falcon mode then we need to make sure it
configures basic GPIO (iomux, padconf, and default output levels).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:26 +02:00
Tim Harvey
2089b7be2b imx: ventana: use common uart and i2c setup functions in SPL
Now that uart and i2c setup functions have been moved to common.c we can
use these and remove code duplication.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:26 +02:00
Tim Harvey
6d38f3a85d imx: ventana: detect pmic using i2c probe instead of board model
Avoid requiring board-model and probe pmic by its i2c address.
This is in preparation for being able to call pmic_setup() from SPL
and not need board type.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
2d833c8528 imx: ventana: move GSC boot watchdog disable function to gsc.c
Move the code that disables the GSC boot watchdog into gsc.c

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
e56c5791af imx: ventana: split out common functions between SPL and uboot
Move shared functions used by both SPL and U-Boot to common.c:
 - setup_iomux_uart() and uart pad config
 - gpio pad config

In the process also moved the following to common.c in preparation for
calling it from the SPL:
 - split i2c setup into a shared function
 - move pmic init to setup_pmic() function to call directly from
   power_init_board()
 - split gpio setup into early (iomux and default pin config)
   and late (output configuration based on env)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
77c5501893 imx: ventana: default msata/pci mux to pci before PCI enumeration
PCI enumeration occurs early, before we fully configure our GPIO's. Make
sure we steer the MSATA/PCI mux to PCI in board_init to ensure PCI is
selected before enumeration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
9ec3c8d4b0 imx: ventana: fix pcie reset for GW522x
The re-assignment of pcie_rst gpio for GW522x needs to occur earlier, before
the PCI subsystem calls the toggle funciton.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
d41c8c8ece imx: ventana: enable DM_SERIAL
mxc_serial supports DM so lets use it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
def6031533 imx: ventana: register gpio's with gpio_request
Prior to using a gpio a call to gpio_request() should be called to register
it with the gpio subsystem.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:25 +02:00
Tim Harvey
06c3564d5f imx: ventana: display SPL boot device
Display what device the SPL will fetch uboot.img from

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15 19:21:24 +02:00
Tim Harvey
d783c2744f imx: ventana: fix boot to SD
This fixes a regression caused by e25fbe3fe5
(gw_ventana: Move the DCD settings to spl code)

The clock gating must be setup prior to calling arch_cpu_init(). Without this
booting to SD (directly via eFuse or via bmode) will hang.

Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-05-15 19:20:48 +02:00
Pushpal Sidhu
9e2b0c2d72 imx: ventana: Update missing memory/calib handling
This commit combines catching missing memory and calibration data into
one if() block. It further prints pertinent information in determining
why the failure occurred.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Pushpal Sidhu
767d88b037 imx: ventana: Add new memory configuration
Add memory configuration for an IMX6SDL + 1GB density DRAM.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Tim Harvey
18b3a91a8f imx: ventana: set HDMI video in to yuv422bt656 for GW551x-A
The initial revision of the GW551x does not connect enough signals between
the HDMI receiver and the IMX6 CSI for 16bit capture mode necessary for
yuv422smp capture. Future revisions will, but for the initial rev force it
to yuv422bt656 mode which requires an 8bit video data bus.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Tim Harvey
a2559f113c imx: ventana: use hdmiinfmt env var to override HDMI capture format
The HDMI receiver used on the GW54xx and GW551x has a 16bit video data bus
interconnect between it and the IMX6 CSI. This can be used in two different
modes, each having advantages and disadvantages. Allow the hdmiinfmt env
var to specify which format is desired (yuv422smp or yuv422bt656).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Pushpal Sidhu
e9fc6d137b imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIO
The GW522x is functionally the same as a GW52xx except for PCIE_RST#
GPIO. Add a DT fixup to change this gpio upon bootup.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:12 +02:00
Tim Harvey
ee5931d488 imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog
This adds information about the Gateworks System Controller to the gsc command
such as the firmware version, firmware CRC and status of the GSC watchdog
(if its enabled and if its tripped).

Additionally the 'gsc wd' command can be used to enable or disable the
watchdog with the following usage:
 gsc wd enable [30|60]
 gsc wd disable

Note that the GSC registers are battery-backed by the GSC coincell so once
eanbled, they remain enabled across power-cycles or until either the GSC
firmware has been updated or FLASH has been re-programmed by the Gateworks
JTAG adapter.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
4569cd561d imx: ventana: added device-tree display configuration for LVDS displays
Configure kernel device-tree for display from env var. This is useful
to specify the display present when the device-tree supports multiple
non-detectable display configurations.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
f02390b6ab imx: ventana: add support for DLC-700JMGT4 and DLC-800FIGT3 LCD displays
Add LVDS support for two LVDS LCD displays:
 DLC-700JMGT4 - 7" 1024x600
 DLC-800FIGT3 - 8" 1024x768

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
95069704cd imx: ventana: add DT fixup for GW54xx compatibility with older kernels
Certain older kernels in use by some customers erroneously define a uart3
for GW54xx with a pinmux that conflicts with NAND. This will remove
that node to avoid such conflicts.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
7f14c31bba imx: ventana: remove 128x16 calibration (share with 128x32)
The calibration data for dual 2Gb density chips can be used for a single 2Gb
density chip.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
06edcb9d37 imx: ventana: updated 16bit DDR calibration
Updated 16bit DDR calibration using values obtained from running the
i.MX6 DDR Stress Test tool over a set of boards over full operationg
temperature.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:11 +02:00
Tim Harvey
eeca451ace imx: ventana: added DT fixup for GW551x-A video input
The GW551x-A revision does not have the CSI0_DATA_EN pin connected, therefore
we need to make sure that signal is not muxed to the CSI_DATA_EN signal
internally and do so by steering it to the unused GPIO5_IO20.

We do this so that the kernel device-tree can properly define the signal for
RevB and beyond boards that do have this hooked up properly and require it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:10 +02:00
Tim Harvey
45af3f74bc imx: ventana: gsc: add new hwmon rails
Add a new voltage rail added in various -C revision PCB's.

Additionally make VDD_CORE, VDD_SOC, and VDD_IO2 common as all Ventana boards
have those.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:10 +02:00
Tim Harvey
e7329174c8 imx: ventana: add mem_mb dynamic env var
Certain OS bootscripts need to know how much memory a board has to adjust
kernel parameters (namely Android). This allows those boards to determine
mem size in MB.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:10 +02:00
Tim Harvey
16e369f5ec imx: ventana: remove GSC hwmon voltage rail min/max test
The min/max of each depends not only on board but on CPU. Simplify by removing
this rarely needed and difficult to maintain feature and just display the
rails and their values.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:10 +02:00
Tim Harvey
aec3761a77 imx: ventana: only pinmux FEC enet signals for boards using it
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:09 +02:00
Tim Harvey
7c5cd42ab1 imx: ventana: add wdis config for GW5520
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:09 +02:00
Tim Harvey
75f21e3131 imx: ventana: Add support for GW551x
The GW551x is a small form factor board based on the IMX6 SoC that includes:
 * up to 512MB DDR3 memory
 * up to 2GB NAND flash
 * 1x miniPCIe socket (with USB)
 * HDMI out (micro-HDMI)
 * HDMI in (micro-HDMI)
 * TTL level I/O (supported by GW16111 breakout board):
  * I2C
  * 2x UART
  * CAN
  * 2x DIO (GPIO/PWM)
  * USB OTG

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:09 +02:00
Tim Harvey
0c81b14fac imx: ventana: disable IMX6 watchdogs on GW51xx RevA and RevB
A board level errata causes the IMX6 watchdog to be unstable on the GW51xx
RevA and RevB boards which can cause the watchdog to trip extremely early
(under 5seconds) under certain operating conditions. Disable the watchdog
node in the device-tree to work around this issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:09 +02:00
Tim Harvey
1274bd2c27 imx: ventana: fix various sparse warnings
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:08 +02:00
Tim Harvey
4717e1395e imx: ventana: set LTC3676 PMIC to appropriate values per datasheet
The IMX6 Datasheets specifies that when the IMX6 LDO is enabled
(internal Anatop LDO's for VDD_ARM, VDD_SOC, and VDD_xPU) you need to
provide 1350mV on VDD_ARM_IN and VDD_SOC_IN for IMX6Q@1GHz (Automotive)
and 1275mV for IMX6DL@800MHz (Industrial). While we are still about 50mV
shy on the IMX6Q operating at 1GHz we set it to the max we can and leave it
up to the kernel to implement a regulator driver for the LTC3676 and put
the LDO's in bypass mode which allows us to drop the voltages by 125mV
respectively.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:07 +02:00
Tim Harvey
b0b83347a9 imx: ventana: add support for 4Gb density mem devices with IMX6DL
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:07 +02:00
Tim Harvey
29f0d6b1d0 imx: ventana: enable precharge power-down fast-exit mode
Enable fast-exit precharge mode necessary for some DDR3 devices being
used on Ventana boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:07 +02:00
Tim Harvey
a51de276d8 imx: ventana: add usb_pcisel hwconfig support
The GW52xx has a MUX that can direct front-panel USB OTG to one of the
miniPCIe sockets (for use with a cellular modem for example). Use hwconfig
to steer this.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:07 +02:00
Tim Harvey
3ee26ecc72 imx: ventana: remove unused GPIO configuration
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:07 +02:00
Tim Harvey
e806b22984 imx: ventana: assign default ethprime dynamically
Gateworks Ventana boards don't all use IMX6 FEC, so lets define default
ethprime based off the first detected device.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:06 +02:00
Tim Harvey
0a6ee033d7 imx: ventana: add i210 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:39:06 +02:00
Stefan Roese
576cd6b3fa arm: mx6: gw_ventana: Change clock init to enable NAND related clocks
Otherwise NAND booting is likely to fail. Since this disables the NAND related
clocks and SPL can't load the main U-Boot from NAND.

This problem was introduced with this patch:

e25fbe3f (gw_ventana: Move the DCD settings to spl code)

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-12-19 15:32:14 +01:00
Tom Rini
1fc4e6f486 Merge git://git.denx.de/u-boot-fdt 2014-11-26 11:21:14 -05:00
Fabio Estevam
3a7577e5f3 gw_ventana: Use the generic spl_sd.cfg
gw_ventana can boot from SPI or NAND and both of these interfaces boot from
the same 0x400 offset.

This means that we could simplify the code and replace the custom gw_ventana.cfg
with the generic spl_sd.cfg, as it provides the same boot offset of 0x400.

Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-24 11:59:59 +01:00
Simon Glass
e895a4b06f fdt: Allow ft_board_setup() to report failure
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00
Fabio Estevam
e25fbe3fe5 gw_ventana: Move the DCD settings to spl code
mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR.

Move the configuration to the spl code.

CCM_CCOSR setting is no longer required to get audio functionality in the
kernel, so remove such setting.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:13:54 +01:00
Georges Savoundararadj
2e07c249a6 kconfig: arm: introduce symbol for ARM CPUs
This commit introduces a Kconfig symbol for each ARM CPU:
CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
for CPU_ARM1176 and CPU_V7.

For each target, the corresponding CPU is selected and the definition of
SYS_CPU in the corresponding Kconfig file is removed.

Also, it removes redundant "string" type in some Kconfig files.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29 09:02:09 -04:00
Eric Nelson
3acb011c3c ARM: i.MX: provide declaration for board_spi_cs_gpio
Provide a public declaration of the board_spi_cs_gpio()
callback for i.MX SPI chip selects to prevent the warning
"Should it be static?" when compiling with "make C=1".

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-21 10:47:14 +02:00
Albert ARIBAUD
4b19b7448e Merge remote-tracking branch 'u-boot-imx/master'
The single file conflict below is actually trivial.

Conflicts:
	board/boundary/nitrogen6x/nitrogen6x.c
2014-10-08 21:20:49 +02:00
Stefan Roese
1dd42e313b ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f
Zeroing GD in board_init_f() is not needed any more. As its now done in
crt0.S. The patch that clears the GD in crt0.S is this one:

aae2aef9 [arm: Set up global data before board_init_f()] from Simon.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2014-10-01 09:12:02 +02:00
Nikita Kiryanov
155fa9af95 spi: mxc: fix sf probe when using mxc_spi
MXC SPI driver has a feature whereas a GPIO line can be used to force CS high
across multiple transactions. This is set up by embedding the GPIO information
in the CS value:

cs = (cs | gpio << 8)

This merge of cs and gpio data into one value breaks the sf probe command:
if the use of gpio is required, invoking "sf probe <cs>" will not work, because
the CS argument doesn't have the GPIO information in it. Instead, the user must
use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force
cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must
type "sf probe 15872".

This is inconsistent with the description of the sf probe command, and forces
the user to be aware of implementaiton details.

Fix this by introducing a new board function: board_spi_cs_gpio(), which will
accept a naked CS value, and provide the driver with the relevant GPIO, if one
is necessary.

Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Eric Benard <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-24 17:25:39 +05:30
Tom Rini
e38b15b061 Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-09-17 18:01:04 -04:00
Masahiro Yamada
461be2f96e kconfig: remove redundant "string" type in arch and board Kconfigs
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-13 16:43:55 -04:00
Thierry Reding
dc73cbe7b0 imx: ventana: Avoid undefined behaviour
The leds array within struct ventana has space for 3 elements, but the
setup_board_gpio() function tries to set up 4 GPIOs for LEDs. Recent
versions of GCC complain about that:

	board/gateworks/gw_ventana/gw_ventana.c: In function 'setup_board_gpio':
	board/gateworks/gw_ventana/gw_ventana.c:987:27: warning: iteration 3u invokes undefined behavior [-Waggressive-loop-optimizations]
	   if (gpio_cfg[board].leds[i])
				   ^
	board/gateworks/gw_ventana/gw_ventana.c:986:2: note: containing loop
	  for (i = 0; i < 4; i++) {
	  ^

Fix this by making the upper bound of the loop match the array size.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 16:26:33 +02:00
Tim Harvey
dad08286ea imx: ventana: add pci fixup for PLX PEX860x switch GPIO
Most Gateworks Ventana boards use a PLX PEX860x PCIe switch for PCIe expansion.
These boards use GPIO on the PLX device as PERST# for the downstream ports
thus we assert this when the PLX is enumerated.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 16:15:03 +02:00
Tim Harvey
a7c67d7c49 imx: ventana: added cputype env var
There are many similarities between the IMX6QUAD/IMX6DUAL and there are
many similarities between the IMX6SOLO/IMX6DUALITE. Add a 'soctype' env
variable that tells you which type you have.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 15:19:03 +02:00
Tim Harvey
3aa226740f imx: ventana: add GW5520 support
The GW5520 has an IMX6Q SoC with 512MB of DDR3, 256MB of NAND flash as well as:
 * 2x MiniPCIe sockets
 * 2x USB host sockets
 * 2x i210 GigE
 * HDMI out
 * digital I/O expansion

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 15:13:25 +02:00
Tim Harvey
c91e4b8b08 imx: ventana: base SPL MMDC calibration on width and size not board
The IMX6 MMDC calibration registers depend on propagation delay and capacitive
loading between the SoC's MMDC and the DDR3 chips. On the Ventana boards the
board layout varies little in trace-lengths such that propagation delays are
irrelevant thus we can simply things by using calibration values obtained
from various board layouts based on a common SoC and DDR chip configuration.

This eliminates board-model from being needed allowing more flexibility. These
values were tested on a large sample size of Gateworks Ventana boards ranging
in layout, and memory configuration over the entire temperature range supported.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 15:13:25 +02:00
Tim Harvey
5b94b6f6b2 imx: ventana: updated notes regarding NAND boot errata
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09 15:13:24 +02:00
Tim Harvey
9c0fe83eb5 imx: ventana: add econfig command
The Gateworks Ventana EEPROM contains a set of configuration bits that
affect the removal of device-tree nodes that support peripherals that do not
exist on sub-loaded boards. This patch adds:
 - a structure to define a config bit name, dt node alias, bit position
 - an array of supported configuration items
 - an econfig command to get/set/list configuration bits
 - use of the array when adjusting the FDT prior to boot

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:08:37 +02:00
Tim Harvey
6a9032112e imx: ventana: leave PCI reset de-asserted if PCI enabled
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:04:12 +02:00
Tim Harvey
6a165904ac imx: ventana: add iomux for PCISKT_WDIS# gpio
The PCISKT_WDIS# gpio allows for asserting WDIS# going to the various PCIe
sockets on the Ventana board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:03:09 +02:00
Tim Harvey
d9d4149296 imx: ventana: enable SION bit on gpio outputs
Enable the SION bit on gpio outputs that we wish to be able to read the
value of.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:02:28 +02:00
Tim Harvey
2cb6e529d3 imx: ventana: configure i2c_dis# pin properly for gw53xx
The i2c_dis# pinmux/padconf was missing for the GW53xx (this feature was
added to the GW53xx on revB PCB's). Additionally, remove the duplicate
config for GW54xx.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 13:01:29 +02:00
Tim Harvey
49281f4d6d imx: ventana: add missing crlf to print
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:59:50 +02:00
Tim Harvey
b40833d8ee imx: ventana: add video enable gpio pinmux for GW54xx
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:58:50 +02:00
Tim Harvey
e5131d53bf imx: ventana: add appropriate delay following GSC i2c write
The Gateworks System Controller EEPROM config is flash based. Add a delay
following writes to avoid errors on back-to-back writes.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:53:50 +02:00
Tim Harvey
2325bb1898 imx: ventana: remove caam disable per eeprom bit
During manufacturing this bit is not getting enabled when it should be, so
we will ignore it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:52:58 +02:00
Tim Harvey
63b85adcec imx: ventana: set dynamic env var for flash layout
NAND devices have differing layouts with respect to page size and pages per
block. These parameters affect the parameters that need to be passed to
mkfs.ubifs and ubinize used to create UBI images. The various NAND chips
supported by Gateworks Ventana fall into two different layouts which we
refer to as 'normal' and 'large'. This layout is useful when referencing
ubi files to download and flash so we create a dynamic env variable for it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-08-20 12:51:35 +02:00
Stefano Babic
e82abaeb7f Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	boards.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-08-11 10:21:03 +02:00
Fabio Estevam
676ac24e07 pmic: pmic_pfuze100: Use a shorter name for PMIC name
It is redundant to use 'PFUZE100_PMIC' as the PMIC name because we already
know it is a PMIC.

Call it simply 'PFUZE100' instead.

Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-08-08 10:29:41 +02:00
Masahiro Yamada
93d4334f7f Add board MAINTAINERS files
We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Suggested-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:06 -04:00
Masahiro Yamada
dd84058d24 kconfig: add board Kconfig and defconfig files
This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:01 -04:00
Fabio Estevam
0a11d6f29c mx6: Remove duplication of iomuxc structure
There is no need to keep iomuxc_base_regs structure as it serves the exact same
purpose of the iomuxc structure, which is to provide access to the GPR
registers.

The additional fields of iomuxc_base_regs are not used. Other advantage of
'iomuxc' is that it has a shorter name and the variable declarations can fit
into a single line.

So remove iomuxc_base_regs structure and use iomuxc instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-07-23 12:25:41 +02:00
Tim Harvey
0cc11dea89 imx: ventana: switch to SPL
Switch to an SPL image. The SPL for Ventana does the following:
 - setup i2c and read the factory programmed EEPROM to obtain DRAM config
   and model for board-specific calibration data
 - configure DRAM per CPU/size/layout/devices/calibration
 - load u-boot.img from NAND and jump to it

This allows for a single SPL+u-boot.img to replace the previous multiple boa
configurations.

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
Tim Harvey
680e8db450 imx: ventana: auto-configure for IMX6Q vs IMX6DL
use the new iomux function and a macros to create a multi-dimensional array
of iomux values without duplicating the defintions.

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
Tim Harvey
1badf2f47c imx: ventana: split read_eeprom into standalone file
Split the read_eeprom function out so that it can be shared (ie with SPL)

Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-06-06 10:07:26 +02:00
Tim Harvey
7a278f9f1b imx: ventana: add HDMI and LVDS display capability
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 15:10:54 +02:00
Tim Harvey
483a435d93 imx6: ventana: fix system-serial dt property
Fix typo in setting of system-serial property causing the prop len to be
off by 1.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 15:10:54 +02:00
Tim Harvey
234d89dac6 ventana: Add support for the LTC3676 PMIC
The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the
GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC
at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1
and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar
values for the LTC3676 are board-specific as they relate to a resistor devider
chosen by the board design.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 15:10:43 +02:00
Tim Harvey
17449272a0 ventana: use non-generic pfuze100 init
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-05-09 14:38:23 +02:00
Tim Harvey
444e4925a4 ventana: remove redundant include
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-04-28 10:45:55 +02:00
Tim Harvey
a594a6f121 ventana: fixed comments in eeprom header
Fix several invalid comments regarding the EEPROM structure used by Gateworks
Ventana boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-04-28 10:45:55 +02:00