Commit graph

753 commits

Author SHA1 Message Date
Andre Przywara
0bc846a769 sunxi: A64: OHCI: prevent turning off shared USB clock
On the A64 the clock for the first USB controller is actually the parent
of the clock for the second controller, so turning them off in that order
makes the system hang.
Fix this by only turning off *both* clocks when the *last* OHCI controller
is brought down. This covers the case when only one controller is used.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-07-05 11:25:50 +02:00
Emmanuel Vadot
ff5d5cc233 usb: dwc2: Add brcm,bcm2708-usb compatible
When using CONFIG_OF_BOARD on rpi to use the dtb provided by the
RaspberryPi Fundation, the compatible string isn't the same, resulting
in not-functional usb from u-boot.

Signed-off-by: Oleksandr Tymoshenko <gonzo@FreeBSD.org>
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
2018-07-05 11:25:49 +02:00
Jagan Teki
9c22aec410 usb: sunxi: Use proper reg_mask for clock gate, reset
Masking clock gate, reset register bits based on the
probed controller is proper only due to the assumption
that masking should start with 0 even thought the controller
has separate PHY or shared between OTG.

unfortunately these are fixed due to lack of separate
clock, reset drivers.

Say for example EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG)
so we need to start reg_mask 0 - 2.

This patch calculated the mask, based on the register base
so that we can get the proper bits to set with respect to
probed controller.

We even do this masking by using PHY index specifier from dt,
but dev_read_addr_size is failing for 64-bit boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-29 10:52:18 +02:00
Zeng Tao
11080bf6c7 usb: ohci: change the NUM_EDs from 8 to 32
For ohci, the maximam supported endpoint number is 32(in and out), and
now we have used (usb_pipeendpoint(pipe) << 1) to index the specified
endpoint descritor, usb_pipeendpoint(pipe) can reach 0xf, so we need
change the NUM_EDs from 8 to 32.

Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
2018-06-29 10:52:12 +02:00
Vasily Khoruzhick
ebbc23a049 usb: sunxi: ohci: make ohci_t the first member in private data
ohci-hcd casts priv_data pointer to (ohci_t *), thus it must be
the first member in private data struct.

Fixes 831cc98b1 ("usb: sunxi: Simplify ccm reg base code")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-29 10:52:07 +02:00
Tom Rini
a715415bb5 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-06-16 00:07:37 -04:00
Vasily Khoruzhick
b9f34757db usb: sunxi: access ahb_reset0_cfg in CCM using its offset
struct sunxi_ccm_reg doesn't have ahb_reset0_cfg on sun4i and sun5i,
thus compilation fails with:

drivers/usb/host/ohci-sunxi.c:96:26: error: 'struct sunxi_ccm_reg' has
no member named 'ahb_reset0_cfg'

Access this reg using its offset to fix this issue.

Fixes commit 1ed9c1118 ("usb: sunxi: ehci: get rid of ifdefs")
and commit 56830cee3 ("usb: sunxi: ohci: get rid of ifdefs")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-14 12:57:19 +02:00
Vasily Khoruzhick
11bb62768d usb: sunxi: sun50i: enable OHCI0 clock when OHCI1 is in use
On A64 OHCI1 clock source is OHCI0 clock, so we need to enable OHCI0
clock when OHCI1 is in use.

Fixes commit dd3228170a ("usb: sunxi: Switch to use generic-phy")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Vasily Khoruzhick
56830cee3a usb: sunxi: ohci: get rid of ifdefs
We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Vasily Khoruzhick
1ed9c11188 usb: sunxi: ehci: get rid of ifdefs
We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Bin Meng
9fddf6c7dd usb: xhci-pci: Fix compiler warning
This fixes the following compiler warning:

  "warning: cast from pointer to integer of different size
  [-Wpointer-to-int-cast]"

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13 09:50:57 +08:00
Tom Rini
809e0e398a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-06-04 08:55:00 -04:00
Tom Rini
582d97b6d3 Xilinx changes for v2018.07 second pull
zynqmp:
 - Show reset reason
 - Remove emulation platform
 - Update pmufw version
 - Simplify mmc bootmode
 - Remove dc2 useless configuration file
 - Cleanup mini config
 - Defconfig syncup
 - zcu100, zcu104 and zcu111 dts fixes
 
 xilinx:
 - Use live-tree functions in some drivers
 - Add support for Avnet Minized and Antminer S9
 
 fpga:
 - Add secure bitstream loading support
 
 mmc:
 - Add hs200 mode support
 
 usb xhci:
 - Header fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlsRRy4ACgkQykllyylKDCEovgCdGWsr4XFQfDZxCEMmsg2vyJF2
 0egAnj6Td1k6yTzQPDXwCtExZJfS/vgl
 =QxUz
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes

xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9

fpga:
- Add secure bitstream loading support

mmc:
- Add hs200 mode support

usb xhci:
- Header fix
2018-06-01 13:50:15 -04:00
Michal Simek
b168591c89 usb: xhci: zynqmp: Fix header location
There is no reason to specify header with full soc name.
Symlink is setup automatically (arch -> arch-zynqmp)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Philipp Tomsich
afa314d3a3 rockchip: xhci: remove DTS parsing for PHY (which is unused)
The xhci wrapper-driver for Rockchip searches the DTS to find its
child node compatbile with 'rockchip,rk3399-usb3-phy' to retrieve the
base-address of the PHY.  However, this is currently broken (and
always has been), returning NULL.  However, the (wrongly) retrieved
base-address is never used.

We thus remove this code for now.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-30 11:59:10 +02:00
Bin Meng
e40406603f usb: xhci: Handle endianness in xhci_set_configuration()
In xhci_set_configuration(), 'Context Entries' field in the slot
context was cleared with mask LAST_CTX_MASK, but it should have
taken the endianness into consideration.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-05-30 11:59:10 +02:00
Bin Meng
eaaefb066c usb: xhci: Fix config fail of FS hub behind a HS hub with MTT
If a full speed hub connects to a high speed hub which supports MTT,
the MTT field of its slot context will be set to 1 when xHCI driver
setups an xHCI virtual device in xhci_setup_addressable_virt_dev().
Once usb core fetch its hub descriptor, and need to update the xHC's
internal data structures for the device, the HUB field of its slot
context will be set to 1 too, meanwhile MTT is also set before, this
will cause configure endpoint command fail. In the case, we should
clear MTT to 0 for full speed hub according to section 6.2.2.

This keeps in sync with Linux kernel commit:
  096b110: usb: xhci: fix config fail of FS hub behind a HS hub with MTT

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-05-30 11:59:10 +02:00
Bin Meng
ae751b060e usb: xhci: Initialize dev_state to 0 in the input slot context
Per xHCI spec chapter 6.2.2 table 6-7, as input, software shall
initialize the dev_state field to '0'. Though this does not seem
to cause any issue with most xHC implementations, let's do this
to conform with the spec.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
2018-05-30 11:59:10 +02:00
Bin Meng
793c819c6e usb: xhci: Set accurate add context flags when updating hub attributes
If a USB 3.0 hub is plugged into the root port of the xHC, the xHCI
driver will issue a 'Configure Endpoint' command to the xHC for it
to update its internal data structure for this hub device. The hub
attributes are in the slot context so we need tell xHC to update the
slot context by setting the add context flags of the input control
context to only cover the slot context.

At present the add context flags is or'ed with the slot context bit,
but it should really be accurately set to the slot context, as the
variable that holds the value of the add context flags comes from
whatever was set in the last command execution, which may contain
additional contexts that 'Configure Endpoint' command should not
touch. Some xHC implementations like x86 don't complain such, but
it was observed on Renesas RCar Gen3 platform that the RCar xHC
complains with a 'TRB error' completion codes as the response.

Reported-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
2018-05-30 11:59:10 +02:00
Matthias Blankertz
3f48422679 usb: xhci-rcar: deregister before deactivating clock
During the execution of xhci_deregister xHCI registers are accessed. If
the clock is already deactivated when xhci_deregister is called this can
lead to undefined behavior. Change the order to deregister the device
before deactivating the clock.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
2018-05-30 11:59:10 +02:00
Jagan Teki
dd3228170a usb: sunxi: Switch to use generic-phy
Allwinner USB PHY handling can be done through driver-model
generic-phy so add the generic-phy ops to relevant places
on host and musb sunxi driver and enable them in respective
SOC's.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
831cc98b1f usb: sunxi: Simplify ccm reg base code
Move struct sunxi_ccm_reg pointer to private structure
so-that accessing ccm reg base become more proper way
and avoid local initialization in each function.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Michal Simek
d067624c47 usb: xhci: zynqmp: Remove support for !DM_USB
Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18 13:23:15 +02:00
Michal Simek
41a3d4fda4 usb: xhci: zynqmp: Add support for DM_USB
The patch is adding support for DM_USB for xhci driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-18 13:23:13 +02:00
Tom Rini
f739fcd831 SPDX: Convert a few files that were missed before
As part of the main conversion a few files were missed.  These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict.  This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56f ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10 20:38:35 -04:00
Masahiro Yamada
8c1de5e08b regmap: clean up regmap allocation
Putting zero length array at the end of struct is a common technique
to embed arbitrary length of members.  There is no good reason to let
regmap_alloc_count() branch by "if (count <= 1)".

As far as I understood the code, regmap->base is an alias of
regmap->ranges[0].start, but it is not helpful but make the code
just ugly.

Rename regmap_alloc_count() to regmap_alloc() because the _count
suffix seems pointless.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: fixup cpu_info-rcar.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 15:15:27 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Neil Armstrong
003659bda9 usb: host: dwc3: fix phys init
When no PHYs are declared in the dwc3 node, the phy init fails.
This patch checks if the "phys" property is presend and reports
the error returned by dev_count_phandle_with_args().

This patchs also fixes the styles issues added in last commit.

This patch should fix the DWC3 support on the UniPhier SoC family.

Fixes: 7c839ea70c ("usb: host: dwc3: Add support for multiple PHYs")
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-26 14:03:13 +02:00
Neil Armstrong
38276090ee usb: dwc3-of-simple: fix error check of clk_get_bulk when disabled
The disabled clk API returns -ENOSYS unlike the reset API returning -ENOTSUPP.

Fixes: ca7fdc8b12 ("usb: host: Add simple of glue driver for DWC3 USB Controllers integration")
Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-21 18:38:56 +02:00
Jean-Jacques Hiblot
cc73ba97c0 usb: dwc3-of-simple: Add support for DRA7/AM57 platforms.
Add the compatibility with "ti,dwc3" and enable it by default if DM_USB
is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-21 18:38:56 +02:00
Jean-Jacques Hiblot
103774b71c usb: dwc3-of-simple: Fix dependencies
This simple glue layer does not require CONFIG_MISC, but it does require
CONFIG_DM_USB.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-21 18:38:56 +02:00
Neil Armstrong
7c839ea70c usb: host: dwc3: Add support for multiple PHYs
DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support
for a generic number of PHYs and adapt the code to handle a generic
number of PHYs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 17:22:07 +02:00
Neil Armstrong
ca7fdc8b12 usb: host: Add simple of glue driver for DWC3 USB Controllers integration
This is a port of the dwc3-of-simple driver from Linux to enable/deassert
clock and resets of a simple DWC3 Controller HW glue.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 17:22:07 +02:00
Patrice Chotard
ac6c796c3f usb: dwc2: Replace printf, pr_err by dev_info, dev_err
Replace printf() call by dev_info() and pr_err() by dev_err()

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:23:09 +01:00
Christophe Kerello
c2e4c86569 usb: dwc2: increase timeout in wait_for_chhltd
This patch increases timeout to 2s.
It was seen on 2 USB devices (Verbatim STORE N GO 070B4AED0FB22358 and
USB DISK 2.0 9000729BA41DDF40) that the request sense command takes
between 1.3s and and 1.5s.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:23:09 +01:00
Christophe Kerello
82e7975b85 usb: dwc2: disable external vbus supply when the device is removed
This patch adds an interface to disable the power in dwc2 driver.
This new interface is called when the device is removed.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:23:09 +01:00
Patrice Chotard
6048d42fa7 usb: ohci-generic: replace pr_err() by dev_err()
As we get access to struct udevice, use dev_err() instead
of pr_err().

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
cab4d48a93 usb: ohci-generic: factorize PHY operation
Factorize PHY get/init/poweron and PHY poweroff/exit operations
into separate function, it simplify the error path.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
633e1ec6bf usb: ohci-generic: handle phy power on/off
Add generic_phy_power_on() and generic_phy_power_off()
calls to switch ON/OFF phy during probe and remove functions.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
df7777ab43 usb: ehci-generic: replace pr_err() by dev_err()
As we get access to struct udevice, use dev_err() instead
of pr_err().

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
20f06a4833 usb: ehci-generic: factorize PHY operation
Factorize PHY get/init/poweron and PHY poweroff/exit operations
into separate function, it simplify the error path.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Patrice Chotard
a800a6793f usb: ehci-generic: handle phy power on/off
Add generic_phy_power_on() and generic_phy_power_off()
calls to switch ON/OFF phy during probe and remove functions.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-17 03:20:53 +01:00
Stefan Roese
2715e32ce1 usb: Remove unused ppc4xx EHCI host driver
ppc4xx support was removed some time ago. Lets remove the now unused
EHCI driver and all its references for this platform as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Marek Vasut <marex@denx.de>
2018-03-17 03:20:15 +01:00
Vignesh R
2fd4242cc5 ubs: xhci-dwc3: Enable USB3 PHY when available
DWC3 USB3 controllers will need USB3 PHY to be enabled, in addition to
USB2 PHY, to be functional. Therefore enable USB3 PHY when available.

Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-03-17 03:19:09 +01:00
Vignesh R
3fc2635d3d usb: xhci-dwc3: Refractor PHY operations into separate function
Refractor PHY get/init/poweron and PHY poweroff/exit operations into
separate function so that its easy to support multiple PHYs.

Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-03-17 03:19:08 +01:00
Vignesh R
7d4e4d3063 usb: xhci-dwc3: Power on USB PHY before using
It is wrong that expect .phy_init() to also power on the PHY. Therefore,
explicitly, call generic_phy_power_on() after generic_phy_power_init() in
order to power on PHY before using it.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-03-17 03:19:08 +01:00
Alexey Brodkin
42637fdae8 usb: dwc2: Allow selection of data buffer size
If we use hardware with very small RAM (let's consider just a couple
of hundreds of kB but not megabytes) it is not super convenient to lose
64kB for statically allocated bufer which most probably won't be used
as big as it is. Typically we'll have much shorter data packages to
excahnge and in the worst case longer packets will be split on separate
transactions.

For those corner-cases user will be able to set his buffer size of
choice via USB_DWC2_BUFFER_SIZE option in menuconfig.

By default we'll use 64 kB as it was hard-coeded before so existing
users shouldn't be affected at all.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
2018-03-17 03:15:18 +01:00
Tom Rini
81f077f40f Merge git://git.denx.de/u-boot-sh 2018-03-05 20:24:17 -05:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00