Commit graph

42 commits

Author SHA1 Message Date
Simon Glass
04035fd36c dm: test: Add a test for the system controller uclass
Add a test to confirm that we can access system controllers and find their
driver data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:33 -06:00
Simon Glass
b9d33fa06c sandbox: Add a warm and cold reset driver
Add drivers for sandbox. One can only perform a warm reset (which does
nothing). The other can perform a cold reset or a power reset (the
latter will quit U-Boot). These can be used for testing the reset uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:31 -06:00
Simon Glass
f9917454d5 dm: Add a system reset uclass
It is common for system reset to be available at multiple levels in modern
hardware. For example, an SoC may provide a reset option, and a board may
provide its own reset for reasons of security or thoroughness. It is useful
to be able to model this hardware without hard-coding the behaviour in the
SoC or board. Also there is a distinction sometimes between resetting just
the CPU (leaving GPIO state alone) and resetting all the PMICs, just cutting
power.

To achieve this, add a simple system reset uclass. It allows multiple devices
to provide reset functionality and provides a way to walk through them,
requesting a particular reset type until is it provided.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:29 -06:00
Stefan Roese
1cdd941200 misc: led: Add PCA9551 LED driver
This patch adds a driver for the PCA9551 LED controller.

Originated-by: Timo Herbrecher <t.herbrecher@gateware.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-05-08 17:24:17 -04:00
Bhupesh Sharma
422cb08acb armv8/fsl-lsch3: Add Freescale Debug Server driver
The Debug Server driver is responsible for loading the Debug
server FW on the Service Processor (Cortex-A5 core) on LS2085A like
SoCs and then polling for the successful initialization of the same.
TOP MEM HIDE is adjusted to ensure the space required by Debug Server
FW is accounted for. MC uses the DDR area which is calculated as:

MC DDR region start = Top of DDR - area reserved by Debug Server FW

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-04-21 10:26:29 -07:00
Simon Glass
a33aca10ac dm: sandbox: pci: Enable PCI for sandbox
Enable PCI options so that sandbox can be used for testing this bus with
driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:07 -06:00
gaurav rana
fe78378d7d fsl_sec_mon: Add driver for Security Monitor block of Freescale
The Security Monitor is the SOC’s central reporting point for
security-relevant events such as the success or failure of boot
software validation and the detection of potential security compromises.

The API's for transition of Security states have been added
which will be used in case of SECURE BOOT.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-03-05 12:04:59 -08:00
Bin Meng
a2927e09bc x86: Add a simple superio driver for SMSC LPC47M
On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8)
are provided by a superio chip connected to the LPC bus. We must
program the superio chip so that serial ports are available for us.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-12-13 22:32:05 -07:00
Simon Glass
20142019a9 dm: Add a simple EEPROM driver
There seem to be a few EEPROM drivers around - perhaps we should have a
single standard one? This simple driver is used for sandbox testing, but
could be pressed into more active service.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:43 -07:00
Simon Glass
6ec1b75358 dm: i2c: Add an I2C EEPROM simulator
To enable testing of I2C, add a simple I2C EEPROM simulator for sandbox.
It supports reading and writing from a small data store.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:42 -07:00
Stefano Babic
1cad23c5f4 Merge branch 'master' of git://git.denx.de/u-boot-arm into master
Conflicts:
	arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
	arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-04-04 11:35:30 +02:00
Marek Vasut
2bbcccf552 ARM: mxs: Add OCOTP driver
Add yet another OCOTP driver for this i.MX family. This time, it's a driver for
the OCOTP variant found in the i.MX23 and i.MX28. This version of OCOTP is too
different from the i.MX6 one that I could not use the mxc_ocotp.c driver without
making it into a big pile of #ifdef . This driver implements the regular fuse
command interface, but due to the IP blocks' limitation, we support only READ
and PROG functions.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-03-31 18:28:50 +02:00
Simon Glass
df93d90aea cros_ec: sandbox: Add Chrome OS EC emulation
Add a simple emulation of the Chrome OS EC for sandbox, so that it can
perform various EC tasks such as keyboard handling.

Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:47 -06:00
York Sun
0b66513b27 Driver/IFC: Move Freescale IFC driver to a common driver
Freescale IFC controller has been used for mpc8xxx. It will be used
for ARM-based SoC as well. This patch moves the driver to driver/misc
and fix the header file includes.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-11-25 11:43:47 -08:00
Masahiro Yamada
710f1d3d5f drivers: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:01 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Hung-ying Tyan
c8d3328a0a cros: add LPC support for cros_ec
This patch adds LPC support for carrying out the cros_ec protocol.

Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Hung-ying Tyan <tyanh@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:13:28 -04:00
Hung-ying Tyan
f3424c554c cros: exynos: add SPI support for cros_ec
This patch adds SPI support for carrying out the cros_ec protocol.

Signed-off-by: Hung-ying Tyan <tyanh@chromium.org>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:13:24 -04:00
Hung-ying Tyan
78764a4e11 cros: add I2C support for cros_ec
This patch adds I2C support for carrying out the cros_ec protocol.

Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Hung-ying Tyan <tyanh@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:12:24 -04:00
Hung-ying Tyan
88364387c6 cros: add cros_ec driver
This patch adds the cros_ec driver that implements the protocol for
communicating with Google's ChromeOS embedded controller.

Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Hung-ying Tyan <tyanh@chromium.org>
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:07:11 -04:00
Benoît Thébaudeau
112fd2ec6c Add mxc_ocotp driver
Add an mxc_ocotp driver for i.MX6.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28 11:07:43 +02:00
Benoît Thébaudeau
0f67e09e9e Add fsl_iim driver
Add a fsl_iim driver common to i.MX and MPC.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-28 11:07:41 +02:00
Vadim Bendebury
98ab435f73 x86: Add CBMEM console driver for coreboot
This patch builds upon the recently introduced CBMEM console
feature of coreboot.

CBMEM console uses a memry area allocated by coreboot to store
the console output. The memory area has a certain structure,
which allows to determine where the buffer is, the buffer size
and the location of the pointer in the buffer. This allows
different phases of the firmware (rom based coreboot, ram based
coreboot, u-boot after relocation with this change) to keep
adding text to the same buffer.

Note that this patch introduces a new console driver and adds the
driver to the list of drivers to be used for console output, i.e.
it engages only after u-boot relocates. Usiong CBMEM console for
capturing the pre-relocation console output will be done under a
separate change.

>From Linux, run the cbmem.py utility (which is a part of the coreboot
package) to see the output, e.g.:

vvvvvvvvvvvvvvvvv
SCSI:  AHCI 0001.0300 32 slots 6 ports ? Gbps 0xf impl SATA mode
flags: 64bit ilck stag led pmp pio
...
Magic signature found
Kernel command line: "cros_secure  quiet loglevel=1 console=tty2...
^^^^^^^^^^^^^^^^^

Note that the entire u-boot output fits into the buffer only if
the coreboot log level is reduced from the most verbose. Ether
the buffer size will have to be increased, or the coreboot
verbosity permanently reduced.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:03 -08:00
Scott Wood
8bc50f0b6d powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx
It's arch code and not a driver, so move it where it belongs.  When it
originally went into drivers/misc there was no 8xxx CPU directory.

This will make new-SPL support a little easier since we can keep the CPU
stuff together and not need to pull stuff in from drivers/misc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-11-26 15:41:22 -06:00
Łukasz Majewski
e0a0cbf247 pmic: Move pmic related code to ./drivers/power directory
The PMIC framework has been moved to its more natural place
./drivers/power from ./drivers/misc directory.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-14 11:21:09 +01:00
Fabio Estevam
20831061d8 pmic: Add support for the Dialog DA9053 PMIC
Add support for the Dialog DA9053 PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-05-15 08:31:31 +02:00
Łukasz Majewski
8504296045 misc:pmic:max8997 MAX8997 support for PMIC driver
This commit adds support for MAX8997 PMIC driver.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:29 +02:00
Stefano Babic
f8f96129bf misc: pmic: drop old Freescale's pmic driver
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:32 +02:00
Stefano Babic
b2e5add3b2 misc: pmic: Freescale PMIC switches to generic PMIC driver
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Łukasz Majewski
993858585d misc:pmic:max8998 MAX8998 support at a new PMIC driver.
This commit adds support for MAX8998 PMIC driver.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Łukasz Majewski
e542b7f0a2 misc:pmic:core New generic PMIC driver
I2C or SPI PMIC devices can be accessed.
Separate files: pmic_i2c.c and pmic_spi.c are responsible
for handling transmission over I2C or SPI bus.

New flags:
CONFIG_PMIC - enable PMIC general device.
CONFIG_PMIC_I2C/SPI - specify the interface to be used.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-27 21:56:31 +02:00
Stefano Babic
01bb24b642 Add basic support for Freescale's mc9sdz60
The patch adds helper funtions for basic access to the registers
of the MC9sdz60 chip (multifunctional device with RTC and CAN) via
I2C interface.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02 00:54:43 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Ilya Yanok
7f0d241d5c led_display: split led display support into generic and hw-dependent parts
Split the display command into generic interface and hardware-specific
realization for PDSP188x LED display found on hmi1001 and manroland
boards. Simple interface for LED displays is defined in
include/led-display.h and described in doc/README.LED_display.
Driver-specific implementation was moved into drivers/misc/pdsp188x.c
file (enabled with CONFIG_PDSP188x set).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2010-10-12 22:44:33 +02:00
Thomas Chou
3e6b86b555 misc: add gpio based status led driver
This patch adds a status led driver followed the GPIO access
conventions of Linux. The led mask is used to specify the gpio pin.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28 10:56:03 -04:00
Stefano Babic
28bb6d34d3 MX: Added Freescale Power Management Driver
The patch add supports for the Freescale's Power
Management Controller (known as Atlas) used together with i.MX31/51
processors. It was tested with a MC13783 (MX31) and
MC13892 (MX51).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-05 09:48:41 +02:00
Tom Rix
2c15513010 OMAP3 Move twl4030 power and led functions
Because twl4030 now has its own device files, move exiting
omap3 power_init_r to a new location.

power_init_r is the only function in board/omap3/common.
It initializes the twl4030 power for the board and enables
the led.

The power part of the the function is moved to twl4030_power_init in
drivers/power/twl4030.c The power compilation is conditional on the
existing config variable CONFIG_TWL4030_POWER.

The led part is moved to twl4030_led_init in the new file
drivers/misc/twl4030_led.c  The led compilation is conditional on
the new config variable CONFIG_TWL4030_LED

The directory board/omap3/common was removed because power_init_r
was the only function in it.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
2009-07-29 09:57:30 +02:00
Peter Tyser
a7c9310457 Add support for Maxim's DS4510 I2C device
Initial support for the DS4510, a CPU supervisor with
integrated EEPROM, SRAM, and 4 programmable non-volatile
GPIO pins. The CONFIG_DS4510 define enables support
for the device while the CONFIG_CMD_DS4510 define
enables the ds4510 command. The additional
CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
CONFIG_DS4510_RST defines add additional sub-commands
to the ds4510 command when defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-24 01:47:50 +01:00
Jean-Christophe PLAGNIOL-VILLARD
55d6d2d39f drivers/misc: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:40 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Kumar Gala
83d40dfd79 85xx: Move LAW init code into C
Move the initialization of the LAWs into C code and provide an API
to allow modification of LAWs after init.

Board code is responsible to provide a law_table and num_law_entries.

We should be able to use the same code on 86xx as well.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:55 -06:00
Jean-Christophe PLAGNIOL-VILLARD
318c0b9043 drivers/misc : move misc drivers to drivers/misc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:51 +01:00