Commit graph

86418 commits

Author SHA1 Message Date
Christophe Leroy
6ab7c3d6ba Fix sparse checks processing
A lot of errors are encountered when building with sparse checking
activated (make C=1 or make C=2).

Many of them are fixed in Linux.

Resynchronise Makefile and include/linux/build_bug.h with Linux
kernel sources by porting the following Linux commits into u-boot:
- 6c49f359ca14 ("kbuild: disable sparse warnings about unknown attributes")
- 80591e61a0f7 ("kbuild: tell sparse about the $ARCH")
- 8788994376d8 ("linux/build_bug.h: change type to int")
- 527edbc18a70 ("build_bug.h: remove most of dummy BUILD_BUG_ON stubs for Sparse")
- c60d3b79423a ("build_bug.h: remove negative-array fallback for BUILD_BUG_ON()")
- 14e83077d55f ("include: drop pointless __compiler_offsetof indirection")

Also revert commit aa9e891c63 ("include/linux/stddef.h: avoid
'warning: preprocessor token offsetof redefined'") because the
error it creates is worse than the warning it is trying to fix.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-15 14:08:45 -04:00
Rasmus Villemoes
a0f9a77912 kbuild: Allow DTB overlays to built from .dtso named source files
[Linux commit 363547d2191c]

Currently DTB Overlays (.dtbo) are build from source files with the same
extension (.dts) as the base DTs (.dtb). This may become confusing and
even lead to wrong results. For example, a composite DTB (created from a
base DTB and a set of overlays) might have the same name as one of the
overlays that create it.

Different files should be generated from differently named sources.
 .dtb  <-> .dts
 .dtbo <-> .dtso

We do not remove the ability to compile DTBO files from .dts files here,
only add a new rule allowing the .dtso file name. The current .dts named
overlays can be renamed with time. After all have been renamed we can
remove the other rule.

[Import notes: Adapt to U-Boot by using the cmd_dtco function instead
of cmd_dtc just like the current .dts -> .dtbo rule.]

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-15 14:08:45 -04:00
Rasmus Villemoes
d50af66343 kbuild: add dtc as dependency on .dtb files
[Linux commit b8fc5b2157b1]

If dtc is rebuilt, we should rebuild .dtb files with the new dtc.

[Import notes: Back then there was no .dtbo rule in Linux's
Makefile.lib, but the current .dtbo rules in Linux also have the
$(DTC) dependency, so also add it to our .dtbo rule.]

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-15 14:08:45 -04:00
Rasmus Villemoes
6923f49d3a scripts/Makefile.dts: tweak logic for deciding which dtbs to build
The idea in 3609e1dc5f (dts: automatically build necessary .dtb
files) was fine, but the implementation was suboptimal due to some
misunderstandings on my part (and possibly defects in some defconfig
files):

- Sometimes DEFAULT_DEVICE_TREE is not included in OF_LIST or
  SPL_OF_LIST

- SPL_OF_LIST is not always a subset of OF_LIST

- While SPL_OF_LIST governs the list of dtbs relevant to SPL (i.e.,
  may be built into an
  SPL-with-bunch-of-dtbs-to-choose-between-at-runtime), those dtbs are
  not actually _built_ during the SPL build phase, i.e. when $(SPL_)
  would expand to SPL_. fdtgrep runs on the artifacts produced during
  the ordinary U-Boot build.

Tweak the logic so that we simply add the union of all dtbs mentioned
in either DEFAULT_DEVICE_TREE, OF_LIST and SPL_OF_LIST to dtb-y. That
should, for real, ensure that we always build all the dtbs that is
relevant to the current board, and should in turn enable us to
massively simplify arch/*/dts/Makefile.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-15 14:08:44 -04:00
Martin Hundebøll
f07381529b scripts: dtc-version: support git version strings too
Building dtc from git causes the version number to start with a 'v'
(e.g. v1.7.0). printf then fails to parse 'v1' as a decimal value, and
prints '000700' instead of '010700'. Subsequently, the build fails,
because '000700' is less than the required '010400' version.

Signed-off-by: Martin Hundebøll <martin@geanix.com>
2023-05-15 14:08:44 -04:00
Tom Rini
eaa9efafff Merge branch '2023-05-11-CONFIG_IS_ENABLED-vs-IS_ENABLED-cleanups' into next
- Bring in some of the clean-ups to use IS_ENABLED rather than
  CONFIG_IS_ENABLED to make the code less error-prone.
2023-05-11 13:02:03 -04:00
Troy Kisky
1781ec67f4 power: pmic: add dm style definitions if not CONFIG_IS_ENABLED(POWER_LEGACY)
This avoids an error in converting to CONFIG_IS_ENABLED(DM_PMIC).
Many boards SPL code needs these definitions to compile, even if
the functions are not linked.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
d975da6363 arm: mach-imx: use CONFIG_$(SPL_)SATA instead of CONFIG_SATA
This avoid an error with enable_sata_clock when
defined(CONFIG_SATA) is changed to CONFIG_IS_ENABLED(SATA).

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
32af1c0b3f wandboard: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA
Prepare for linking setup_sata only when CONFIG_SATA/CONFIG_SPL_SATA
is defined.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
2023-05-10 16:45:42 -04:00
Troy Kisky
ff286fbc51 solidrun: mx6cuboxi: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA
Prepare for linking setup_sata only when CONFIG_SATA/CONFIG_SPL_SATA
is defined.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
e7b03ee0fc freescale: common: pfuze: define pfuze_mode_init only if defined(CONFIG_DM_PMIC)
pfuze_mode_init calls pmic_reg_read which is only available from

obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o

Prepare for conversion of defined(CONFIG_DM_PMIC) to
CONFIG_IS_ENABLED(DM_PMIC).

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
e775fc676a m53menlo: define ft_board_setup only if CONFIG_IS_ENABLED(OF_LIBFDT)
The function ft_board_setup calls do_fixup_by_path_string
which is only available on CONFIG_IS_ENABLED(OF_LIBFDT).
This prepares for the conversion.

ft_board_setup is only called from image-fdt which is linked by
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
55e4505dd2 ofnode: fdt_support definitions needed if OF_CONTROL is enabled
With the use of CONFIG_IS_ENABLED in code, instead of at the preprocessor
level, these defines are still needed if OF_CONTROL is enabled.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
97c0db6ca5 config_distro_bootcmd: remove booting environment variables from SPL environment
SPL environments don't need commands that they can never use.
Avoid errors with CONFIG_IS_ENABLED conversions by skipping them now.

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
d5d0e4d3e2 x86: cpu: qemu: qemu: remove SPL use with CONFIG_IS_ENABLED
CONFIG_IS_ENABLED(SPL_X86_32BIT_INIT)
would check for CONFIG_SPL_SPL_X86_32BIT_INIT for SPL builds

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-10 16:45:42 -04:00
Troy Kisky
289aa6a371 cmd: nvedit: remove error check, handle with Kconfig
Avoid error messages when SPL,TPL,VPL build don't
have the environment options of the main build.
This is needed when defined(CONFIG_ENV_IS_IN_xxx) is changed
to CONFIG_IS_ENABLED(ENV_IS_IN_xxx).

Signed-off-by: Troy Kisky <troykiskyboundary@gmail.com>
2023-05-09 11:38:33 -04:00
Tom Rini
11910550b6 Merge branch 'master' into next 2023-05-08 14:31:04 -04:00
Tom Rini
f1d33a44ca Prepare v2023.07-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-08 14:16:32 -04:00
Tom Rini
56a3a499f4 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-08 13:43:35 -04:00
Judith Mendez
8774e45e89 board: ti: am64x: Add support for AM64B SK
The AM64x SR2.0 SK board uses "AM64B-SKEVM" as the EEPROM identifier.
This board is similar to the AM64x SKEVM except that it has a new
PMIC that will be enabled in the future and consequently could use a
different device tree file in the future.

For now we treat the board same as an AM64x SK.

Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-05-08 09:27:20 -04:00
Nikhil M Jain
7a17e4c6f1 common: spl: spl: Remove video driver before u-boot proper
Add method to remove video driver before loading u-boot proper. When
bootstage changes from SPL to u-boot proper, noo method is called to
remove video driver, and at u-boot proper if video driver is not
enabled, the video driver starts displaying garbage on the screen,
because there is no reserved space for video and the frame buffer gets
u-boot proper data written.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-05-08 09:26:12 -04:00
Nikhil M Jain
72236302e6 board: ti: am62x: evm: Add necessary functions to call splash screen
To enable splash screen on AM62x at a53 SPL setup DRAM, set page table,
enable cache to allow copying of bmp image to frame buffer and display
it using splash_display.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-05-08 09:26:12 -04:00
Nikhil M Jain
852480c1f4 board: ti: am62x: am62x: Change splashimage and splashsource
Change splashimage which is bmp image loadaddr to 0x80200000 since stack
is situated at 0x80477660 as splash framework requires bmp image to be
present above stack.

Change splashsource to sf to support loading bmp image from ospi flash
memory.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-05-08 09:26:12 -04:00
Nikhil M Jain
5c64598bf7 configs: am62x_evm_a53_defconfig: Changes in memory to support SPL splash screen
To enable splash at A53 SPL, need to do memory map changes which
involves locate stack above malloc and have enough space to load bmp
image above stack. To load a 1920X1200 image a minimum of 8.8MB space is
needed, to support it move malloc down to 0x80b80000 from 0x80480000 and
bss to 0x80c80000 to have 1MB buffer between malloc and BSS.

Observed SPL size 195KB, CONFIG_SPL_SIZE_LIMIT set to 256KB.
Observed stack size 1904Bytes, CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK set
to 2KB.
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE config sets stack above the malloc
and reports for stack overflow.

Memory map at A53 SPL before splash screen
0x80000000+---------------------+
          |    Empty 512 KB     |
          |                     |
0x80080000+---------------------+
          |     Text Base       |
          |       352 KB        |
          |                     |
0x800D8000+---------------------+
          |                     |
          |                     |
          |    Empty 3.6MB      |
          |                     |
          |                     |
0x80477660+---------------------+
          |    Stack 2 KB       |
0x80477e60+---------------------+
          |     GD 416 Bytes    |
0x80478000+---------------------+
          |    Malloc 352 KB    |
          |                     |
0x80480000+---------------------+
          |                     |
          |                     |
          |                     |
          |                     |
          |   Empty 5.5 MB      |
          |                     |
          |                     |
          |                     |
          |                     |
0x80a00000+---------------------+
          |                     |
          |      BSS 512 KB     |
          |                     |
0x80a80000+---------------------+
          |                     |
          |                     |
          |                     |
          |                     |
          |   Empty 5.5 MB      |
          |                     |
          |                     |
          |                     |
          |                     |
0x81000000+---------------------+FIT Image load address

New memory map with splash screen at SPL
0x80000000+---------------------+
          |    Empty 512 KB     |
          |                     |
0x80080000+---------------------+
          |     Text Base       |
          |       352 KB        |
          |                     |
0x800D8000+---------------------+
          |    Empty 1.1MB      |
          |                     |
0x80200000+---------------------+
          |                     |
          |                     |
          |                     |
          |   BMP Image Load    |
          |                     |
          |       9.4 MB        |
          |                     |
          |                     |
          |                     |
          |                     |
          |                     |
          |                     |
0x80b77660+---------------------+
          |     Stack 2KB       |
0x80b77e60+---------------------+
          |    GD 416 Bytes     |
0x80b78000+---------------------+
          |                     |
          |    Malloc 352KB     |
0x80b80000+---------------------+
          |                     |
          |     Empty 1 MB      |
          |                     |
0x80c80000+---------------------+
          |     BSS 512 KB      |
          |                     |
0x80d00000+---------------------+
          |                     |
          |                     |
          |    Empty 3.0 MB     |
          |                     |
          |                     |
          |                     |
0x81000000+---------------------+FIT Image load addressi

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-05-08 09:26:12 -04:00
Dominique Martinet
b1d3013d02 btrfs: fix offset when reading compressed extents
btrfs_read_extent_reg correctly computed the extent offset in the
BTRFS_COMPRESS_NONE case, but did not account for the 'offset - key.offset'
part correctly in the compressed case, making the function read
incorrect data.

In the case I examined, the last 4k of a file was corrupted and
contained data from a few blocks prior, e.g. reading a 10k file with a
single extent:
btrfs_file_read()
 -> btrfs_read_extent_reg
    (aligned part loop, until 8k)
 -> read_and_truncate_page
   -> btrfs_read_extent_reg
      (re-reads the last extent from 8k to the end,
      incorrectly reading the first 2k of data)

This can be reproduced as follow:
$ truncate -s 200M btr
$ mount btr -o compress /mnt
$ pat() { dd if=/dev/zero bs=1M count=$1 iflag=count_bytes status=none | tr '\0' "\\$2"; }
$ { pat 4K 1; pat 4K 2; pat 2K 3; }  > /mnt/file
$ sync
$ filefrag -v /mnt/file
File size of /mnt/file is 10240 (3 blocks of 4096 bytes)
 ext:     logical_offset:        physical_offset: length:   expected: flags:
   0:        0..       2:       3328..      3330:      3:             last,encoded,eof
$ umount /mnt

Then in u-boot:
=> load scsi 0 2000000 file
10240 bytes read in 3 ms (3.3 MiB/s)
=> md 2001ff0
02001ff0: 02020202 02020202 02020202 02020202  ................
02002000: 01010101 01010101 01010101 01010101  ................
02002010: 01010101 01010101 01010101 01010101  ................

(02002000 onwards should contain '03' pattern but went back to 01,
start of the extent)

After patch, data is read properly:
=> md 2001ff0
02001ff0: 02020202 02020202 02020202 02020202  ................
02002000: 03030303 03030303 03030303 03030303  ................
02002010: 03030303 03030303 03030303 03030303  ................

Note that the code previously (before commit e3427184f3 ("fs: btrfs:
Implement btrfs_file_read()")) did not split that read in two, so
this is a regression even if the previous code might not have been
handling offsets correctly either (something that booted now fails to
boot)

Fixes: a26a6bedaf ("fs: btrfs: Introduce btrfs_read_extent_inline() and btrfs_read_extent_reg()")
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
2023-05-08 09:23:53 -04:00
Tom Rini
fbfe7fb5ae Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- cmd: tlv_eeprom: Misc cleanups & improvements (Josua)
2023-05-08 09:10:39 -04:00
Josua Mayer
fa0af90a0e cmd: tlv_eeprom: enable 'dev' subcommand before 'read'
Move the handler for "tlv_eeprom dev X" command to the beginning of
do_tlv_eeprom, to allow using it before issuing a "read" command for
currently selected eeprom.

Also remove the check if eeprom exists, since that can only work after
the first execution of read_eeprom triggered device lookup.
Instead accept values up to the defined array size (MAX_TLV_DEVICES).

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-05-08 10:47:13 +02:00
Josua Mayer
f6eff35b8c cmd: tlv_eeprom: handle -ENODEV error from read_eeprom function
When tlv eeprom does not exist, return error code instead of quietly
making up tlv structure in memory.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-05-08 10:47:11 +02:00
Josua Mayer
425d963dac cmd: tlv_eeprom: remove use of global variable has_been_read
has_been_read is only used as an optimization for do_tlv_eeprom.
Explicitly use and set inside this function, thus making read_eeprom
stateless.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-05-08 10:47:08 +02:00
Josua Mayer
dfda0c0140 cmd: tlv_eeprom: remove use of global variable current_dev
Make tlv_eeprom command device selection an explicit parameter of all
function calls.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-05-08 10:47:05 +02:00
Tom Rini
1917a1a8a8 Merge branch 'for-2023.07-2' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx
This pull request adds misc fixes for cssi boards and activates
CPM relocation in order to enable the use of SCC4 in
QMC (QUICC Multi-Channel) mode.
2023-05-07 09:44:27 -04:00
Tom Rini
ae0772f333 Merge branch '2023-05-05-networking-updates'
- Cleanup NFS support, add NFSv1 support, assorted IPv6 improvements,
  PHY cleanups and improvements, ksz9477, ldpaa and rtl8169
  improvements, overall network performance improvements.
2023-05-06 10:34:34 -04:00
Stefan Herbrechtsmeier
1a3af267c0 net: phy: Request rgmii-id phy reset gpio as output
Request the reset gpio of the rgmii-id phy as output to be consistent
with the eth-phy-uclass driver.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
2023-05-05 18:03:18 -04:00
Eugen Hristev
bcbb64b199 net: rtl8169: add minimal support for 8125B variant
Add minimal support for 8125B version.
Changes are based on the Linux driver.
Tested on Radxa Rock 5B Rk3588 board.

Connection to a laptop worked fine in 100 Mbps mode.
1000 Mbps mode is not working at the moment.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:59:20 -04:00
Ehsan Mohandesi
4c516807f4 test: eth: IPv6 network discovery unit test
Test router advertisement validation and processing functions.

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2023-05-05 17:59:20 -04:00
Ehsan Mohandesi
eafbe16b01 test/py: IPv6 network discovery test
Test the IPv6 network discovery feature if indicated by boardenv file.

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2023-05-05 17:59:19 -04:00
Ehsan Mohandesi
6de98b60ba net: ipv6: Add support for default gateway discovery.
In IPv6, the default gateway and prefix length are determined by receiving
a router advertisement as defined in -
https://www.rfc-editor.org/rfc/rfc4861.

Add support for sending router solicitation (RS) and processing router
advertisements (RA).

If the RA has prefix info option and following conditions are met, then
gatewayip6 and net_prefix_length of ip6addr env variables are initialized.
These are later consumed by IPv6 code for non-local destination IP.

- "Router Lifetime" != 0
- Prefix is NOT link-local prefix (0xfe80::/10)
- L flag is 1
- "Valid Lifetime" != 0

Timing Parameters:
- MAX_RTR_SOLICITATION_DELAY (0-1s)
- RTR_SOLICITATION_INTERVAL (4s) (min retransmit delay)
- MAX_RTR_SOLICITATIONS (3 RS transmissions)

The functionality is enabled by CONFIG_IPV6_ROUTER_DISCOVERY and invoked
automatically from net_init_loop().

Signed-off-by: Ehsan Mohandesi <emohandesi@linux.microsoft.com>
Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>Reviewed-by:
Tested-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Tested-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
2023-05-05 17:58:52 -04:00
Nishanth Menon
09005c2fb2 net: phy: Make phy_interface_is_rgmii a switch statement
Recent commit 75d28899e3 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This exposed a problem
in range checking functions to identify the interface type. Though
this specific api wasn't impacted (all the RGMII definitions remained
within range), this experience should be used to never to have to face
this kind of challenge again.

While it is possible for the phy drivers to use the enums directly,
drivers such as dp83867, dp83869, marvell, micrel_ksz90x1 etc use this
api.

Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Nishanth Menon
f1a63f7181 net: phy: Drop phy_interface_is_sgmii
Recent commit 75d28899e3 ("net: phy: Synchronize PHY interface modes
with Linux") reordered the enum definitions. This caused the range of
enums that this api was checking to go bad.

There aren't anymore users of phy_interface_is_sgmii, so, just drop
it. Also the protocols are so very different that it makes no sense to
provide a helper wrapper in the hope of reuse for phy drivers.

Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Suggested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/all/20230414103852.38705065@dellmb/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Nishanth Menon
0207403eeb net: phy: dp83867: Explicitly check against sgmii
dp83867 driver only supports sgmii and not all the newer protocols.
Drop the usage of the generic phy_interface_is_sgmii function and just
matchup to the specific mode supported.

Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Suggested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/all/b82ac325-4818-8e72-054b-640268dbf806@mailbox.org/
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Dmitrii Merkurev
c8acbbbf08 net: share fastboot boot handle logic between transports
Introduce reboot, boot and continue commands support to
TCP fastboot by moving existing UDP logic into the common module.

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-05 17:48:44 -04:00
Dmitrii Merkurev
443d319180 net: add fastboot TCP support
Known limitations are
1. fastboot reboot doesn't work (answering OK but not rebooting)
2. flashing isn't supported (TCP transport only limitation)

The command syntax is
fastboot tcp

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-05 17:48:44 -04:00
Dmitrii Merkurev
08fb8da371 net: support being a TCP server to unblock TCP fastboot
Make following changes to unblock TCP fastboot support:

1. Implement being a TCP server support
2. Introduce dedicated TCP traffic handler (get rid of UDP signature)
3. Ensure seq_num and ack_num are respected in net_send_tcp_packet
function (make sure existing wget_cmd code is reflected with the fix)

Signed-off-by: Dmitrii Merkurev <dimorinny@google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Сс: Joe Hershberger <joe.hershberger@ni.com>
Сс: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Sean Edmond
29fb68c4ff net: dhcp6: Add a sandbox test for dhcp6
Requires proper environment with DHCP6 server provisioned.

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Sean Edmond
7d0188927b net: dhcp6: pxe: Add DHCP/PXE commands for IPv6
Adds commands to support DHCP and PXE with IPv6.

New configs added:
- CMD_DHCP6
- DHCP6_PXE_CLIENTARCH
- DHCP6_PXE_DHCP_OPTION
- DHCP6_ENTERPRISE_ID

New commands added (when IPv6 is enabled):
- dhcp6
- pxe get -ipv6
- pxe boot -ipv6

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Sean Edmond
a0245818f7 net: dhcp6: Add DHCPv6 (DHCP for IPv6)
Adds DHCPv6 protocol to u-boot.

Allows for address assignement with DHCPv6 4-message exchange
(SOLICIT->ADVERTISE->REQUEST->REPLY).  Includes DHCPv6 options
required by RFC 8415.  Also adds DHCPv6 options required
for PXE boot.

Possible enhancements:
- Duplicate address detection on DHCPv6 assigned address
- IPv6 address assignement through SLAAC
- Sending/parsing other DHCPv6 options (NTP, DNS, etc...)

Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-05-05 17:48:44 -04:00
Rasmus Villemoes
0b99afec9c phy: realtek: don't duplicate genphy_startup
rtl8211e_startup() is an exact copy of genphy_startup(). Use that
instead of duplicating it.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-05-05 17:48:44 -04:00
Rasmus Villemoes
8c0ed61390 phy: broadcom: don't duplicate genphy_startup
Functionally, bcm_cygnus_startup() is an exact copy of
genphy_startup().

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-05-05 17:48:44 -04:00
Stefan Herbrechtsmeier
2900342961 net: phy: gmii2rgmii: Support external rgmii-id phy
Read the phy mode of the external phy from the device tree if available
and check that it is a RGMII variant.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
2023-05-05 17:48:44 -04:00
Thomas RIENOESSL
e4bd95bba1 net: add NFSv1 support
NFSv1 support added by Christian Gmeiner, Thomas Rienoessl,
September 27, 2018. As of now, NFSv3 is the default choice.
if the server does not support NFSv3, we fall back to
versions 2 or 1.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
2023-05-05 17:48:44 -04:00