Commit graph

13 commits

Author SHA1 Message Date
Jagan Teki
69aa1b234e phy: sun4i-usb: Update PHY#3 rst_mask only for H3_H5
Only H3 and H5 have 4 PHYS so restrict rst_mask only for them
by checking PHY id as 3 and update the proper bits.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31 11:41:49 +05:30
Jagan Teki
52185b094d phy: sun4i-usb: Remove usb_clk_cfg set in probe
usb_clk_cfg is setting CTRL_PHYGATE bit value in probe
which is BIT 0 for sun4i, 6i and 8 for a83t but all
these were handling in phy ops init exit calls.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31 11:41:45 +05:30
Jagan Teki
0bfcb47aa0 phy: sun4i-usb: Call phy_passby even for PHY#0
On newer Allwinner SoC, there is a pair of EHCI/OHCI USB hosts
for OTG host mode. USB PHY passby must be configured for its
corresponding PHY. so we can call for PHY#0. on the other hand
in past usb-phy code the same thing can be restricted for
Lower SoC's, other than H3/H5/A64.

Now there is no need to restrict usb passby since the phy driver
is DT enabled, and the respective phy calls will trigger based
DT information initiated by the drivers.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31 11:41:41 +05:30
Jagan Teki
aa29b11b3f phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
The sunxi otg phy has a bug where it wrongly detects a high speed squelch
when reset on the root port gets de-asserted with a lo-speed device.

The workaround for this is to disable squelch detect before de-asserting
reset, and re-enabling it after the reset de-assert is done. Add a sunxi
specific phy function to allow the sunxi-musb glue to do this.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
194ccb9a34 phy: sun4i-usb: Add A23 USB PHY config
Allwinner A23 has 2 USB PHY's and 0x04 has phy ctrl offset.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
61bf0ed5db phy: sun4i-usb: Add A33 USB PHY config
Allwinner A33 has 2 USB PHY's and 0x10 has phy ctrl offset.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
bf986d1f60 phy: sun4i-usb: Add A31 PHY config
Allwinner A31 has 3 USB PHY's and rest similar to A10.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
7f90b557c9 phy: sun4i-usb: Add A10/A13/A20 PHY config
Add PHY configs for Allwinner A10/A13/A20 which are SUN4I.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
5f646bf1d7 phy: sun4i-usb: Add A83T USB PHY config
Unlike, other Allwinner SUN4I Phy supporting SOC, A83T has
2 USB PHY's and second one is HSIC. So phy control need to
configure to handle these HSIC and SIDDQ requirement.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
bafe5e3061 phy: sun4i-usb: Add V3S PHY config
V3S has 1 USB PHY, rest are similar to A64.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
43519c4da7 phy: sun4i-usb: Add H3/H5 PHY config
H3/H5 has 4 USB PHY, rest are similar to A64.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
129c45c728 phy: sun4i-usb: Add id_detect and vbus_detect ops
ID and VBUS detection code require when musb changing
between Host and/or Peripheral modes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30
Jagan Teki
6768594326 phy: Add Allwinner A64 USB PHY driver
USB PHY implementation for Allwinner SOC's can be handling
in to single driver with different phy configs.

This driver handle all Allwinner USB PHY's start from 4I to
50I(except 9I). Currently added A64 compatibility more will
add in next coming patches.

Current implementation is unable to get pinctrl, clock and reset
details from DT since the dm code on these will add it future.

Driver named as phy-sun4i-usb.c since the same PHY logic
work for all Allwinner SOC's start from 4I to A64 except 9I
with different phy configurations.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28 16:40:43 +05:30