Commit graph

11 commits

Author SHA1 Message Date
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Andy Shevchenko
98a8f445fd dfu: Add optional timeout parameter
When the `dfu` command is called from the U-Boot environment,
it now accepts an optional parameter that specifies a timeout (in seconds).
If a DFU connection is not made within that time the `dfu` command exits
(as it would if Ctrl+C was pressed). If the timeout is left empty or being
zero the `dfu` command behaves as it does now.

This is useful for allowing U-Boot to check to see if anything wants to
upload new firmware before continuing to boot.

The patch is based on the commit
5e966ccc3c
by Sebastien Colleur, which has been heavily reworked due to U-Boot changes
in the past.

Signed-off-by: Brad Campbell <bradjc5@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-07 14:37:50 +01:00
Andy Shevchenko
2b1f8c2bdf dfu: Refactor do_dfu() to handle optional argument
In the future we may utilize optional argument in 'dfu' command line.
As a preparation for this, refactor do_dfu().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-01-07 14:37:50 +01:00
Patrick Delaunay
febabe3ed4 dfu: allow to manage DFU on several devices
Add support of DFU for several interface/device
with one command.

The format for "dfu_alt_info" in this case is :
- <interface> <dev>'='alternate list (';' separated)
- each interface is separated by '&'

The previous behavior is always supported.

One example for NOR (bootloaders) + NAND (rootfs in UBI):

U-Boot> env set dfu_alt_info \
"sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \
u-boot-env part 0 3&nand 0=UBI partubi 0,3"

U-Boot> dfu 0 list

DFU alt settings list:
dev: SF alt: 0 name: spl layout: RAW_ADDR
dev: SF alt: 1 name: ssbl layout: RAW_ADDR
dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR
dev: NAND alt: 3 name: UBI layout: RAW_ADDR

U-Boot> dfu 0

$> dfu-util -l

Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=3, name="UBI", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=1, name="u-boot", serial="002700333338511934383330"
Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\
 intf=0, alt=0, name="spl", serial="002700333338511934383330"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31 12:12:31 +01:00
Andy Shevchenko
cbc1081da0 dfu: Avoid declaring unused variables and absent parameters
The compiler is not happy when neither USB nor TFTP transport for DFU defined:

cmd/dfu.c: In function ‘do_dfu’:
cmd/dfu.c:31:8: warning: unused variable ‘devstring’ [-Wunused-variable]
  char *devstring = argv[3];
        ^~~~~~~~~
cmd/dfu.c:30:8: warning: unused variable ‘interface’ [-Wunused-variable]
    char *interface = argv[2];
          ^~~~~~~~~

Surround those variables by #ifdef expression.

More serious, that comes under same circumstances, is a compilation error due
to absence of macro parameter:

In file included from include/image.h:45,
                 from include/common.h:35,
                 from cmd/dfu.c:13:
include/command.h:207:24: error: expected expression before ‘,’ token
 # define _CMD_HELP(x) x,
                        ^
include/command.h:286:18: note: in expansion of macro ‘_CMD_HELP’
    _cmd, _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) }
                  ^~~~~~~~~
include/command.h:290:3: note: in expansion of macro ‘U_BOOT_CMD_MKENT_COMPLETE’
   U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
   ^~~~~~~~~~~~~~~~~~~~~~~~~
include/command.h:332:2: note: in expansion of macro ‘U_BOOT_CMD_COMPLETE’
  U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
  ^~~~~~~~~~~~~~~~~~~
cmd/dfu.c:70:1: note: in expansion of macro ‘U_BOOT_CMD’
 U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
 ^~~~~~~~~~
make[1]: *** [scripts/Makefile.build:279: cmd/dfu.o] Error 1
make: *** [Makefile:1518: cmd] Error 2

Put empty string unconditionally to have macro parameter present.

Fixes: 0f44d33536 ("dfu: Fix up the Kconfig mess")
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:51 +02:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Marek Vasut
bb4059a53b dfu: Rename _FUNCTION_DFU to DFU_OVER_
Do the following to make the symbol names less confusing.

sed -i "s/\([TU][^_]\+\)_FUNCTION_DFU/DFU_OVER_\1/g" \
	`git grep _FUNCTION_DFU | cut -d ":" -f 1 | sort -u`

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
2018-02-21 20:28:15 +01:00
Marek Vasut
0f44d33536 dfu: Fix up the Kconfig mess
Clean up the screaming mess of configuration options that DFU is.
It was impossible to configure DFU such that TFTP is enabled and
USB is not, this patch fixes that and assures that DFU TFTP and
DFU USB can be enabled separatelly and that the correct pieces
of code are compiled in.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
2018-02-21 20:28:15 +01:00
B, Ravi
05341a8764 common: dfu: saperate the dfu common functionality
The cmd_dfu functionality is been used by both SPL and
u-boot, saperating the core dfu functionality moving
it to common/dfu.c.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-27 23:30:18 +02:00
Lukasz Majewski
fc18f8d170 dfu: usb: f_dfu: Set deferred call for dfu_flush() function
This patch fixes situation when one would like to write large file into
medium with the file system (fat, ext4, etc).
This change sets file size limitation to the DFU internal buffer size.

Since u-boot is not supporting interrupts and seek on file systems, it
becomes challenging to store large file appropriately.

To reproduce this error - create large file (around 26 MiB) and sent it
to the target board.

Lets examine the flow of USB transactions:

0. DFU uses EP0 with 64B MPS [Max Packet Size]

1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions

2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent
				   from target board - IN transaction
				   (target->PC)

3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero
					      Length Packet]

Now the interesting part starts:

4. OUT (PC->target) Setup transaction (request to share DFU state)

5. IN (target->PC) - reply the current DFU state
	- In the UDC driver the req->completion (with dfu_flush) is called
	  after successful IN transfer.
	- The dfu_flush() (called from req->completion callback) saves the
	  whole file at once (u-boot doesn't support seek on fs).
	  Such operation takes considerable time. When the file
	  is large - e.g. 26MiB - this time may be more than 5 seconds.

6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush()
 writes data to eMMC memory.
 The dfu-util application has hard coded timeout on USB transaction
 completion set to 5 seconds (it uses libusb calls).

When the file to store is large (e.g. 26 MiB) the time needed to write it
may excess the dfu-util timeout and following error message will be displayed:
"unable to read DFU status" on the HOST PC console.

This change is supposed to leverage DFU's part responsible for storing files
on file systems. Other DFU operations - i.e. raw/partition write to NAND and
eMMC should work as before.

The only functional change is the error reporting. When dfu_flush() fails
the u-boot prompt will exit with error information and dfu-util application
exits afterwards as well.

Test HW:
- Odroid XU3 (Exynos5433) - test with large file
- Trats (Exynos4210) - test for regression - eMMC, raw,

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Heiko Schocher <hs@denx.de>
2016-02-24 19:12:32 +01:00
Simon Glass
2e192b245e Remove the cmd_ prefix from command files
Now that they are in their own directory, we can remove this prefix.
This makes it easier to find a file since the prefix does not get in the
way.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-25 10:39:43 -05:00
Renamed from cmd/cmd_dfu.c (Browse further)