Commit graph

50690 commits

Author SHA1 Message Date
Mans Rullgard
66a00be287 ARM: orion5x: fix use of callee-saved registers in lowloevel_init
The lowlevel_init function uses r4 and r6 without preserving their
values as required by the AAPCS.  Use r0 and r2 instead as these
are call-clobbered.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-06-07 09:12:26 -04:00
Tom Rini
3eceff642c Merge branch 'master' of git://git.denx.de/u-boot-samsung 2018-06-06 09:08:16 -04:00
Tom Rini
5b2e9a8cf9 Merge branch 'master' of git://git.denx.de/u-boot-spi 2018-06-06 07:16:43 -04:00
Patrice Chotard
6b6255cd8a mach-stm32: Enable SPL_RESET_SUPPORT flag
Since commit 0e373c0ade ("spl: add SPL_RESET_SUPPORT"),
reset is supported in SPL, enable this flag for STM32F SoCs family.

This allows to remove a specific case in RCC mfd driver.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-06-05 20:19:09 -04:00
Chris Packham
d3671dfcdb drivers/rtc: convert mvrtc to DM
Add DM support for the Marvell RTC driver.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-06-05 20:19:09 -04:00
Chris Packham
942bb6e2ad drivers/rtc: prepare mvrtc for DM conversion
Split the rtc_{get,set,reset} functions so that the bodies can be used
in a DM driver.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2018-06-05 20:19:08 -04:00
Alexey Brodkin
ff2b2ba845 board_f: Only reserve memory for U-Boot if we're going to relocate
In case of no relocation we'll just waste some space at the very end
of usable memory area. If target device has very limited amount of memory
(for example 256 kB) this loss will be pretty inconvenient.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefan Roese <sr@denx.de>
2018-06-05 20:19:08 -04:00
Riku Voipio
0899bd269e board: STiH410-B2260: Add pxefile_addr_r variable
Reading doc/README.distro , we see platform needs to set
pxefile_addr_r to support distro boot.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2018-06-05 20:19:08 -04:00
Masahiro Yamada
86fbad2492 menu: fix timeout duration
For distro-boot, the TIMEOUT directive in the boot script specifies
how long to pause in units of 1/10 sec. [1]

Commit 8594753ba0 ("menu: only timeout when menu is displayed")
corrected this by simply dividing the timeout value by 10 in
menu_interactive_choice().

I see two problems:

 - For example, "TIMEOUT 5" should wait for 0.5 sec, but the current
   implementation cannot handle the granularity of 1/10 sec.
   In fact, it never breaks because "m->timeout / 10" is zero,
   which means no timeout.

 - The menu API is used not only by cmd/pxe.c but also by
   common/autoboot.c .  For the latter case, the unit of the
   timeout value is _second_ because its default is associated
   with CONFIG_BOOTDELAY.

To fix the first issue, use DIV_ROUND_UP() so that the timeout value
is rounded up to the closest integer.

For the second issue, move the division to the boundary between
cmd/pxe.c and common/menu.c .  This is a more desirable place because
the comment of struct pxe_menu says:

 * timeout - time in tenths of a second to wait for a user key-press before
 *           booting the default label.

Then, the comment of menu_create() says:

 * timeout - A delay in seconds to wait for user input. If 0, timeout is
 * disabled, and the default choice will be returned unless prompt is 1.

[1] https://www.syslinux.org/wiki/index.php?title=SYSLINUX#TIMEOUT_timeout

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-05 20:19:08 -04:00
Sam Protsenko
955575c8dc disk: efi: Correct backing up the MBR boot code
In commit e163a931af ("cmd: gpt: backup boot code before writing MBR")
there was added the procedure for storing old boot code when doing "gpt
write". But instead of storing just backup code, the whole MBR was
stored, and only specific fields were replaced further, keeping
everything else intact. That's obviously not what we want.

Fix the code to actually store only old boot code and zero out
everything else. This fixes next testing case:

    => mmc write $loadaddr 0x0 0x7b
    => gpt write mmc 1 $partitions

In case when $loadaddr address and further memory contains 0xff, the
board was bricked (ROM-code probably didn't like partition entries that
were clobbered with 0xff). With this patch applied, commands above don't
brick the board.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Alejandro Hernandez <ajhernandez@ti.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-06-05 10:33:57 -04:00
David Lechner
f203a479e7 ARM: legoev3: update boot script to load uEnv.txt and .dtb
This updates the LEGO MINDSTORMS EV3 boot script to try loading a
uEnv.txt file and a da850-lego-ev3.dtb device tree during boot.

Signed-off-by: David Lechner <david@lechnology.com>
2018-06-05 10:33:57 -04:00
David Lechner
71eb63e7ee ARM: legoev3: remove unused configuration options
This removes the unused clock and RAM config options that were cargo-
culted when this board was copied from the DA850 EVM.

Signed-off-by: David Lechner <david@lechnology.com>
2018-06-05 10:33:57 -04:00
David Lechner
98ada4b3f0 ARM: legoev3: disable networking
This disables networking related items in the config. The EV3 does not have
any networking hardware, so this is wasted space.

Signed-off-by: David Lechner <david@lechnology.com>
2018-06-05 10:33:57 -04:00
David Lechner
648e87a1ec ARM: legoev3: Move UART enable to early init
This moves the UART init for LEGO MINDSTORMS EV3 to board_early_init_f().
Some console messages were not being printed because the UART was not
enabled until later in the init process.

Signed-off-by: David Lechner <david@lechnology.com>
2018-06-05 10:33:57 -04:00
David Lechner
1374d88bf3 ARM: legoev3: increase flash image sizes
This increases the kernel image to 4M and the rootfs image to 10M.

It is getting hard to get a kernel image to fit in 3M.

Signed-off-by: David Lechner <david@lechnology.com>
2018-06-05 10:33:57 -04:00
Tom Rini
89d811eee6 Merge git://git.denx.de/u-boot-marvell 2018-06-05 07:13:42 -04:00
Chris Packham
d4899b0f5d ARM: kirkwood: Enforce size limit for guruplug
The u-boot binary sits in flash immediately before the environment.
Don't allow the binary size to grow into the environment space.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Chris Packham
84035fccbe ARM: kirkwood: Enforce size limit for sheevaplug
The u-boot binary sits in flash immediately before the environment.
Don't allow the binary size to grow into the environment space.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Vagrant Cascadian
3789b3dd15 Enable thumb build to reduce build size of u-boot.kwb.
Without this, u-boot.kwb overlaps where the u-boot environment is
stored, and updating the environment can break u-boot and vice versa.

  https://bugs.debian.org/897671
  https://lists.denx.de/pipermail/u-boot/2018-May/327497.html

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Chris Packham
54e3316ffa ARM: kirkwood: SBx81LIFKW: Enable network hardware
The SBx81LIFKW boards connect to the internal chassis management network
via a Marvell 88e6097 L2 switch. The chassis connections are direct
serdes on ports 8 and 9 with a RGMII interface on port 10 connected to
the CPU MAC.

For debugging purposes ports 0 and 1 are also taken out to headers on
the board. Because the debug interfaces are sometimes connected to with
straight ribbon cables we need to run them at 10Mbps.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Chris Packham
87a62bce28 ARM: add SBx81LIFKW board
This is a series of line cards for Allied Telesis's SBx8100 chassis
switch. The CPU block is common to the SBx81GS24a, SBx81XS6, SBx81XS16
and SBx81GT40 cards collectively referred to as SBx81LIFKW in u-boot.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Chris Packham
2c3c6bc6fb ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
The mach/config.h file would helpfully define CONFIG_SYS_I2C and
CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This
conflicts with the way DM_I2C works. As a transitional measure don't
automatically define these if CONFIG_DM_I2C is defined. It should be
possible to remove this once all kirkwood boards are migrated to DM.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Michael Walle
134a6b6884 arm: kirkwood: lsxl: Add SPI driver model support
This patch shows how to enable driver model support for the LS-CHLv2 and
LS-XHL boards.

There are a couple of open questions:
 - do I need the u-boot,dm-pre-reloc tags in the device tree?
 - should mach/config.h define CONFIG_DM_SEQ_ALIAS?
 - how can we split this patch or are there any other pending patches
   which does the same and I didn't catch these.

This patch is based on the http://git.denx.de/u-boot-marvell.git (master
branch) and needs the following patches, which are still pending:
  https://patchwork.ozlabs.org/patch/909618/
  https://patchwork.ozlabs.org/patch/909617/
  https://patchwork.ozlabs.org/patch/909973/

Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Michael Walle
5886b77942 enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board
Synchronize it with the LS-XHL board.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Jon Nettleton
4ea813d333 arm: mvebu: switch clearfog to use device-tree i2c and gpio
This switches the clearfog boards to use DM based gpio and i2c
drivers.  The io expanders are configured via their device-tree
entries.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: add DT i2c aliases]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00
Jon Nettleton
d6db446f70 arm: mvebu: enable sata support for clearfog
The a38x sata interfaces run in ahci mode and can
be accessed via the scsi command.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
[baruch: rebase on current upstream]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:08 +02:00
Rabeeh Khoury
28be54dc59 mvebu: a38x: Force receiver detected on PCIe lanes
Some QCA988x based modules presence is not detected by the SERDES lanes,
so force this detection which will trigger the LTSSM state machine to
negotiate link.

An example of such a card is WLE900VX.

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Mario Six <mario.six@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:25:42 +02:00
Tom Rini
ee1855dc52 Prepare v2018.07-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 18:08:45 -04:00
Carlo Caione
b1f2b72e39 sf: Add support for gd25q32b gigadevice flash
This flash IC is used in some chromebook models
manufactured by Bitland.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-04 23:40:04 +05:30
Marek Vasut
8ff4130deb sf: Set current flash bank to 0 in clean_bar()
The clean_bar() function resets the SPI NOR BAR register to 0, but
does not set the flash->curr_bar to 0 , therefore those two can get
out of sync, which could ultimatelly result in corrupted flash content.

The simplest test case is this:

  => mw 0x10000000 0x1234abcd 0x4000
  => sf probe
  => sf erase 0x1000000 0x10000
  => sf write 0x10000000 0x1000000 0x10000

  => sf probe ; sf read 0x12000000 0 0x10000 ; md 0x12000000

That is, erase a sector above the 16 MiB boundary and write it with
random pre-configured data. What will actually happen without this
patch is the sector will be erased, but the data will be written to
BAR 0 offset 0x0 in the flash.

This is because the erase command will call write_bar()+clean_bar(),
which will leave flash->bank_curr = 1 while the hardware BAR registers
will be set to 0 through clean_bar(). The subsequent write will also
trigger write_bar()+clean_bar(), but write_bar checks if the target
bank == flash->bank_curr and if so, does NOT reconfigure the BAR in
the SPI NOR. Since flash->bank_curr is still 1 and out of sync with
the HW, the condition matches, BAR programming is skipped and write
ends up at address 0x0, thus corrupting flash content.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-04 23:31:37 +05:30
Ley Foon Tan
6c353674bd spi: cadence_qspi: Change to use devfdt_get_addr_index()
Change to use devfdt_get_addr_index() function to get fdt address.

Original code has compilation warning below:

drivers/spi/cadence_qspi.c: In function ‘cadence_spi_ofdata_to_platdata’:
drivers/spi/cadence_qspi.c:297:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  plat->regbase = (void *)data[0];
                  ^
drivers/spi/cadence_qspi.c:298:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  plat->ahbbase = (void *)data[2];
                  ^
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-04 23:30:04 +05:30
Tom Rini
358b6a20e4 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 11:57:37 -04:00
Ramon Fried
35ada864de MAINTAINERS: Take over DB410c maintainership
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-04 11:25:30 -04:00
Ramon Fried
77e0ecdb4a db410c: Added pre-relocation attribute to pinctrl
u-boot,dm-pre-reloc was missing from pinctrl and it's
children node. causing failure to configure pin mux
before relocation.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-04 11:25:30 -04:00
Heinrich Schuchardt
6bfa0367a2 scripts: mailmapper: SPDX license identifier
If the SPDX license identifier is in the first line the shell does not
recognize which interpreter shall be used to execute the script.

Cf. https://www.kernel.org/doc/html/v4.16/process/license-rules.html
for scripts which require the '#!PATH_TO_INTERPRETER' in the first line
(...) the SPDX identifier goes into the second line.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-06-04 11:25:30 -04:00
Vagrant Cascadian
38cad04e2d Inherit default value for bootdelay from distro_bootcmd on odroid-xu3.
The default value with distro_bootcmd is 2 seconds, which is
reasonably fast, and provides a consistent experience across platforms
supporting distro_bootcmd.

The current bootdelay value of 0 seconds is a bit challenging to
interrupt when desired.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Marek Vasut <marex@denx.de>
2018-06-04 11:25:30 -04:00
Vagrant Cascadian
8664ab7deb Set time and umask on multi-dtb fit images to ensure reproducibile builds.
When building compressed (lzop, gzip) multi-dtb fit images, the
compression tool may embed the time or umask in the image.

Work around this by manually setting the time of the source file using
SOURCE_DATE_EPOCH and a hard-coded 0600 umask.

With gzip, this could be accomplished by using -n/--no-name, but lzop
has no current workaround:

  https://bugs.debian.org/896520

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
2018-06-04 11:25:30 -04:00
Michal Simek
dcd8a102ca xilinx: Sync symbols location in defconfigs
CONFIG_DEBUG_UART_BASE and CONFIG_DEBUG_UART_CLOCK have changed that's
why this sync.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-04 11:25:30 -04:00
Tom Rini
809e0e398a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-06-04 08:55:00 -04:00
Jagan Teki
2e8dbe14e7 board: sun50i: Add Amarula A64-Relic initial support
Amarula A64-Relic is A64 based IoT device, which support
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- AP6330 Wifi/BLE
- MIPI-DSI
- CSI: OV5640 sensor
- USB OTG
- 12V DC power supply

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-04 18:09:25 +05:30
Tom Rini
b5351a4390 SPDX: Fixup tags from latest EFI PR
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-03 16:10:22 -04:00
Tom Rini
a0115ceb56 Patch queue for efi - 2018-06-03
A number of fixes and feature completeness work this time around:
 
   - Fix sunxi GOP reservation
   - Fix cursor position
   - Fix efi_get_variable
   - Allow more selftest parts to build on x86_64
   - Allow unaligned memory access on armv7
   - Implement ReinstallProtocolInterface
   - More sandbox preparation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbE/PWAAoJECszeR4D/txgp3wQAJyk8Y0N4ZpA9O3R/D8jvXvE
 nnk7UfRzIYx5qKFJ6yBRvPh//hjswD9ihNQ5/oVw62pqA1J28jCFDfGmIdDYVSk6
 Itxvyx9O7DQBC4b1sHi5P5euZU/IuxQkUDszI1vOGhgt3al335EEliB4CWuRms2d
 mpOEm39o7eAcBtNTvbER9S+baDmFIcCMrCol/ayVLWwkd6B7X30GtzXCu9mHjoov
 M6KObSLh7lT0gqvYpHoCKIJR9q8b93tIqYyGuk+bBsZmo5IuuuQXqmhoB9LQ/M+p
 mQklJdXorJfk7/kks++I99WaPejcS5U679+A7RCPNiQM1ItavirpbosjdL1F8S5j
 EBsIxTBMnJhR/oQ1KEqRSiIIMzch/M1a6ikJr08Poy5wKVGJfSfJ69DDKCtmeEf+
 5aKNco0q23XcJa/Thc5BNr1wVM7QvhC0NszrvS6aG2IkkvGsKrD3xtB6J2aQeZlc
 JflYPtIELIT8RMn0zeFhNtA9KYCZINCq5Kn4jXz9zAD6vKHfQX1/sdAtojEjNblq
 e7A6aky8e2vHeiYPcz8HbFXwA6wL4qB70BIAYdqZQ73QZGz4bVTtk5YM5pjpHZYk
 uRjQWie+dwtB5EzuWAa1v63EcpM10kL0r3Dfv2bJt70iWzST7xtg4sH4xW1ekL8p
 q/mGsroVPJdI2byEbeol
 =gcE4
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-06-03

A number of fixes and feature completeness work this time around:

  - Fix sunxi GOP reservation
  - Fix cursor position
  - Fix efi_get_variable
  - Allow more selftest parts to build on x86_64
  - Allow unaligned memory access on armv7
  - Implement ReinstallProtocolInterface
  - More sandbox preparation
2018-06-03 12:27:56 -04:00
Tom Rini
22781fca1d Patch queue for rpi - 2018-06-03
This pull request only includes a single patch that was left
 out in the last one: A fix to have the fdt stay at its original
 location in RAM during boot.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbE/B2AAoJECszeR4D/txgNd8QAMEyUMTONRAxGGwUBnqrP1Nu
 ITyT84TDpNW2AFvdbTB+w+su0RvCVvEvVVj2C9EGtsCKOZiRTli52CNTK7iTpgEn
 ebA+T8SYoEwv4lex6YPhGEc05IqMzm3sePP2wXT5nSJiQBsCrvtl2ypC0QnxcHmA
 tTXX0gzaQzvg8HlMpvkxQeihjttYvw06XPUdYcvewXjloe/t3dWT0crV3or/pL2k
 ZNjAdodHMAu+ELW6zV07BxLYX6DneMjbFF5ri6tjMetlsf5TKXkx86HLCnPhWaVc
 6q5G3ftSeaHnYRdZT/i/o61TwQQKZ1cCVeqhZhFyU1UQcz37p3afgB7/7evP69Fd
 pJuqnntrwBUGEAjTqHPOnBV1/ZEbUVr4IcqrXopCSYCcV7nWJIh2slkrfRIm+kQy
 x3ksZcV1qXeVK6m40saVDfi60HtJWHmiZrXf5EOJ/UoyRABVO85ijZjVau9EKSIJ
 2UXCaMJ8n/+Jh0bodjnrLvRrp2mhDF+uyieocfoLFwqGo4KJnIsKHGLKgC+zlAve
 KyM+13RlRJVfVMkK57modThojSsC+hPnIZo/0XNWPPAJieuYLjbqhEGuNf5wwO9z
 01QBxppu6nBAl+WfHzsYiQ9W6DANWs4kh2g6l/yjuRlNc6R4jN5ZGTtlaNRIVYkd
 bo7qED/Rw8+6avIbtSvg
 =pWdA
 -----END PGP SIGNATURE-----

Merge tag 'signed-rpi-next' of git://github.com/agraf/u-boot

Patch queue for rpi - 2018-06-03

This pull request only includes a single patch that was left
out in the last one: A fix to have the fdt stay at its original
location in RAM during boot.
2018-06-03 12:27:42 -04:00
Alexander Graf
80483b2ab6 efi_loader: Fix warning in raw/cols query
The code to determine rows / cols on the screen could potentially run
into a case where it doesn't know how big the screen is. In that case,
assume 80x25.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:51:19 +02:00
Tuomas Tynkkynen
722742598b rpi: Fix fdt_high & initrd_high for 64-bit builds
The magic value that disables relocation is dependent on the CPU word
size, so the current 'ffffffff' is doing the wrong thing on aarch64.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:31:32 +02:00
Heinrich Schuchardt
d29e7824d7 efi_loader: create handles from normal memory
Handles are not used at runtime. They are freed by the firmware when the
last protocol interface is uninstalled. So there is no reason to use EFI
memory when creating handles.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Heinrich Schuchardt
3282614081 efi_loader: efi_mem_carve_out should return s64
efi_mem_carve_out() is used to remove memory pages from a mapping.
As the number of pages to be removed is a 64bit type the return type
should be 64bit too.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Heinrich Schuchardt
e09159c867 efi_loader: avoid anonymous constants for AllocatePages
Do not use anonymous constants when calling efi_allocage_pages.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Ivan Gorinov
fe5bc23f43 efi_selftest: check for buffer overflow in efi_get_variable
Allocate a buffer on the stack instead of an array of uninitialized
pointers; check if GetVariable writes past the end of the buffer.

Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Heinrich Schuchardt
7f474ef6cc Makefile: clean should delete *.so
Files *.so are generated files. So the clean target should delete them.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00