Commit graph

209 commits

Author SHA1 Message Date
Bin Meng
bbbcb52628 dm: pci: Enable VGA address forwarding on bridges
To support graphics card behind a PCI bridge, the bridge control
register (offset 0x3e) in the configuration space must turn on
VGA address forwarding.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:25 -06:00
Bin Meng
069155cbb4 dm: pci: Fix pci_last_busno() to return the real last bus no
Currently pci_last_busno() only checks the last bridge device
under the first UCLASS_PCI device. This is not the case when
there are multiple bridge devices.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:25 -06:00
Bin Meng
cdf9f085f2 pci: Set PCI_COMMAND_IO bit for VGA device
PCI_COMMAND_IO bit must be set for VGA device as it needs to respond
to legacy VGA IO address.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:25 -06:00
Simon Glass
5dbcf3a0f9 dm: pci: Adjust pci_find_and_bind_driver() to return -EPERM
The current code returns 0 even if it failed to find or bind a driver. The
caller then has to check the returned device to see if it is NULL. It is
better to return an error code in this case so that it is clear what
happened.

Adjust the code to return -EPERM, indicating that the device was not bound
because it is not needed for pre-relocation use. Add comments so that the
return value is clear.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:25 -06:00
Simon Glass
3129ace489 dm: pci: Correct a few debug() statements
One debug() statement is missing a newline. The other has a repeated word.
Fix these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:25 -06:00
Simon Glass
4d21455e09 dm: pci: Tidy up auto-config error handling
When the auto-configuration process fails for a device (generally due to
lack of memory) we should return the error correctly so that we don't
continue to try memory allocations which will fail.

Adjust the code to check for errors and abort if something goes wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:25 -06:00
Fabio Estevam
aaf87f03ad pci: pcie_imx: Fix hang on mx6qp
PCI driver currently hangs on mx6qp.

Toggle the reset bit with the appropriate timings to fix the issue.

Based on the FSL kernel driver implementation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-10-15 09:05:13 -04:00
Bin Meng
7445435fb3 pci: Fix expansion ROM programming for multi-function devices
PCI_HEADER_TYPE register (offset 0x0e) bit 7 is an indicator
for multi-function devices. We should mask it off before using
it as the header type.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-08 20:09:09 +02:00
Bin Meng
1e0f226362 dm: pci: Add an inline API to test if a device is on a PCI bus
Introduce device_is_on_pci_bus() which can be utilized by driver
to test if a device is on a PCI bus.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:52 -06:00
Fabio Estevam
8f6edf6d30 pcie_imx: Use 'ms' for milliseconds
milliseconds should be written as 'ms' instead of 'mS'.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Marek Vasut <marex@denx.de>
2015-09-13 11:04:53 +02:00
Simon Glass
983c6ba227 dm: pci: Allow a PCI bus to be found without an alias
At present, until a PCI bus is probed, it cannot be found by its sequence
number unless it has an alias. This is the same with any device.

However with PCI this is more annoying than usual, since bus 0 is always the
same device.

Add a function that tries a little harder to locate PCI bus 0. This means
that PCI enumeration will happen automatically on the first access.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-09-09 07:48:03 -06:00
Varun Sethi
6923b069bd pci/layerscape: Setup mmu-masters property for the PCIe
Setup mmu-masters property for the PCIe controllers. This would be
used by the Linux SMMU driver, while setting up stream ID table mappings
for the PCIe devices.

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-09-01 21:49:27 -05:00
Bin Meng
1887ed3ad6 dm: pci: Optimize pci_uclass_post_bind()
If there is no pci device listed in the device tree,
don't bother scanning the device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:17 -07:00
Bin Meng
dce54dd6c7 dm: pci: Save devfn without bus number in pci_uclass_child_post_bind()
In pci_uclass_child_post_bind(), bdf is extracted from fdt_pci_addr.
Mask bus number before save it to pplat->devfn.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:13 -07:00
Bin Meng
348b744b7c x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe()
Per Intel FSP specification, we should call FSP notify API to
inform FSP that PCI enumeration has been done so that FSP will
do any necessary initialization as required by the chipset's
BIOS Writer's Guide (BWG).

Unfortunately we have to put this call here as with driver model,
the enumeration is all done on a lazy basis as needed, so until
something is touched on PCI it won't happen.

Note we only call this after U-Boot is relocated and root bus has
finished probing.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:12 -07:00
Bin Meng
08fc7b8fac dm: pci: Support selected device/driver binding before relocation
On some platforms pci devices behind bridge need to be probed (eg:
a pci uart on recent x86 chipset) before relocation. But we won't
bind all devices found during the enumeration. Only devices whose
driver with DM_FLAG_PRE_RELOC set will be bound. Any other generic
devices except bridges won't be bound.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:11 -07:00
Bin Meng
1916ec1267 x86: Set up video framebuffer for coreboot before loading kernel
Currenlty we only set up video framebuffer when VIDEO_VESA driver is
used. With coreboot, VIDEO_COREBOOT driver is used instead. Since we
already saved VESA mode in the VIDEO_COREBOOT driver, now we can also
set up video framebuffer for coreboot before loading Linux kernel.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:09 -07:00
Bin Meng
153e1dda2f video: coreboot: Save VESA mode for future use
When booting as a coreboot payload, the framebuffer details are
passed from coreboot via configuration tables. We save these
information into vesa_mode_info structure for future use.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:08 -07:00
Anton Schubert
9c28d61c8e pci: mvebu: Add PCIe driver
This adds a PCI driver for the controllers found on Marvell MVEBU SoCs.

Besides the driver, this patch also removes the statically defined
PCI MBUS windows. As they are not needed anymore, since this PCIe
driver now creates the windows dynamically.

Tested on Armada XP db-mv784mp-gp eval board using an Intel E1000
PCIe card in all 3 PCIe slots. And on the Armada 38x db-88f6820-gp
eval board using this Intel E1000 PCIe card in the PCIe 0 slot.

This port was done in cooperation with Anton Schubert.

Signed-off-by: Anton Schubert <anton.schubert@gmx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-08-17 18:49:43 +02:00
Simon Glass
7868917032 Revert "dm: pci: Allow scan bridge child devices before relocation"
This reverts commit df189d9ba3.

Unfortunately this commit breaks chromebook_link because it adds lots of PCI devices
before relocation and there is not enough pre-reloc malloc() memory.

Rathar then increase this memory, revert for now until we figure this out.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:11 -06:00
Simon Glass
76c3fbcd3d dm: pci: Add a way to iterate through all PCI devices
These functions allow iteration through all PCI devices including bridges.
The children of each PCI bus are returned in turn. This can be useful for
configuring, checking or enumerating all the devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Simon Glass
66afb4ed92 dm: pci: Provide friendly config access functions
At present there are no PCI functions which allow access to PCI
configuration using a struct udevice. This is a sad situation for driver
model as it makes use of PCI harder. Add these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
York Sun
fdb9f349be lib/fdtdec: Fix compiling warning caused by changing fdt_addr_t type
fdt_addr_t is changed to phys_addr_t. The format in debug should be updated
to %pa to match the type.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Simon Glass <sjg@chromium.org>
2015-08-06 07:31:13 -06:00
Bin Meng
ae0518200f pci: Remove DEBUG from pci_compat.c
Remove DEBUG in drivers/pci/pci_compat.c.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 10:49:32 -06:00
Simon Glass
4bad2e7374 pci: Indicate prefetchable memory allocate when debugging
At present the PCI output displays 'Mem' when it allocates memory for a PCI
device, whether it is prefetchable or not. There is a distinction since the
memory comes from separate pools. Use 'Prf' instead of 'Mem' when allocating
prefetchable memory.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
5f48d798eb pci: Add a constant for an invalid interrupt
Rather than using 0xff in the code, add a constant.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
53292ad956 pci: Fix up code for CONFIG_PCI_ENUM_ONLY
This option is not used by any board but appears to still be useful, at least
for testing. With recent commits it does not build, so fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
da4b159bf0 pci: Use debug() instead of DEBUGF() in pci_auto.c
This file does not need its own way of doing debug(). Clean it up to use the
new way.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Bin Meng
1e7a047304 x86: Sanity test on vesa parameters before setting up kernel screen_info
We should not set up kernel screen_info when the vesa parameters are
insane, otherwise kernel will panic.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:38 -06:00
Bin Meng
df189d9ba3 dm: pci: Allow scan bridge child devices before relocation
On some platforms pci devices behind bridge need to be probed (eg:
a pci uart on recent x86 chipset) before relocation. Remove such
limitation so that dm pci can be used before relocation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:38 -06:00
Minghuan Lian
01cafcedbf drivers/pci/layerscape: Add EP mode support
The patch will initialize PCIe controller on EP mode
1. Setup bar:
   bar0 32bit 4K for specific configuration
   bar1 32bit 8K for MSIX
   bar2 64bit 4K for descriptor of memory
   bar4 64bit 1M for DMA memory test
2. Setup iATU:
   iATU inbound 0-3 to map bar transaction to memory address
   started at CONFIG_SYS_PCI_EP_MEMORY_BASE
   iATU outbound 0 to map 4G memory space

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03 12:06:38 -07:00
Minghuan Lian
ed5b580b38 drivers/pci: Add function to find an extended capability
PCIe extends device's configuration space to 4k and provides
extended capability. The patch adds function to find them.
The code is ported from Linux PCIe driver.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03 12:06:38 -07:00
Bin Meng
d11d9ef157 dm: pci: Support bridge device configuration correctly
Commit aec241d "dm: pci: Use the correct hose when configuring devices"
was an attempt to fix pci bridge device configuration, but unfortunately
that does not work 100%. In pciauto_config_devices(), the fix tried to
call pciauto_config_device() with a ctlr_hose which is supposed to be
the root controller hose, however when walking through a pci topology
with 2 or more pci bridges this logic simply fails.

The call chain is: pciauto_config_devices()->pciauto_config_device()
->dm_pci_hose_probe_bus(). Here the call to dm_pci_hose_probe_bus()
does not make any sense as the given hose is not the bridge device's
hose, instead it is either the root controller's hose (case#1: if it
is the 2nd pci bridge), or the bridge's parent bridge's hose (case#2:
if it is the 3rd pci bridge). In both cases the logic is wrong.

For example, for failing case#1 if the bridge device to config has the
same devfn as one of the devices under the root controller, the call
to pci_bus_find_devfn() will return the udevice of that pci device
under the root controller as the bus, but this is wrong as the udevice
is not a bus which does not contain all the necessary bits associated
with the udevice which causes further failures.

To correctly support pci bridge device configuration, we should still
call pciauto_config_device() with the pci bridge's hose directly.
In order to access valid pci region information, we need to refer to
the root controller simply by a call to pci_bus_to_hose(0) and get the
region information there in the pciauto_prescan_setup_bridge(),
pciauto_postscan_setup_bridge() and pciauto_config_device().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-28 10:36:24 -06:00
Bin Meng
8326f136da dm: pci: Pass only device/function to pci_bus_find_devfn()
In dm_pci_hose_probe_bus(), pci_bus_find_devfn() is called with a bdf
which includes a bus number, but it really should not as this routine
only expects a device/function encoding.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-28 10:36:23 -06:00
Bin Meng
4d8615cbf5 dm: pci: Use complete bdf in all pci config read/write routines
Currently pci_bus_read_config() and pci_bus_write_config() are
called with bus number masked off in the parameter bdf, and bus
number is supposed to be added back in the bridge driver's pci
config read/write ops if the device is behind a pci bridge.
However this logic only works for a pci topology where there is
only one bridge off the root controller. If there is addtional
bridge in the system, the logic will create a non-existent bdf
where its bus number gets accumulated across bridges.

To correct this, we change all pci config read/write routines
to use complete bdf all the way up to the root controller.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-28 10:36:23 -06:00
Bin Meng
95f3aa209a dm: pci: Correct primary/secondary/subordinate bus number assignment
In driver model, each pci bridge device has its own hose structure.
hose->first_busno points to the bridge device's device number, so
we should not substract hose->first_busno before programming the
bridge device's primary/secondary/subordinate bus number registers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-28 10:36:23 -06:00
Simon Glass
4b515e4fc5 dm: pci: Add a function to get the BDF for a device
It is useful to be able to find the full PCI address (bus, device and
function) for a PCI device. Add a function to provide this.

Adjust the existing code to use this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:39 -06:00
Simon Glass
aba9296249 dm: pci: Add support for PCI driver matching
At present all PCI devices must be present in the device tree in order to
be used. Many or most PCI devices don't require any configuration other than
that which is done automatically by U-Boot. It is inefficent to add a node
with nothing but a compatible string in order to get a device working.

Add a mechanism whereby PCI drivers can be declared along with the device
parameters they support (vendor/device/class). When no suitable driver is
found in the device tree the list of such devices is consulted to determine
the correct driver. If this also fails, then a generic driver is used as
before.

The mechanism used is very similar to that provided by Linux and the header
file defintions are copied from Linux 4.1.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-07-21 17:39:38 -06:00
Stuart Yoder
70e52d2115 armv8/fsl-lsch3: device tree fixups for PCI stream IDs
This patch adds the infrastructure to update device
tree nodes to convey SMMU stream IDs in the device
tree.  Fixups are implemented for PCI controllers
initially.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-20 11:44:37 -07:00
Bin Meng
f110da9984 pci: Disable expansion ROM address decoding when signature check fails
We should not leave the expansion ROM address window open when there
is not a valid ROM.

Suggested-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:20 -06:00
Bin Meng
6c89663cb1 pci: Configure expansion ROM during auto config process
Currently PCI expansion ROM address is assigned by a call to
pciauto_setup_rom() outside of the pci auto config process.
This does not work when expansion ROM is on a device behind
PCI bridge where bridge's memory limit register was already
programmed to a value that does not cover the newly assigned
expansion ROM address. To fix this, we should configure the
ROM address during the auto config process.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:20 -06:00
Simon Glass
b9da5086b8 dm: x86: baytrail: Correct PCI region 3 when driver model is used
Commit afbbd413a fixed this for non-driver-model. Make sure that the driver
model code handles this also.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-14 18:03:19 -06:00
Simon Glass
945cae79e1 x86: pci: Tidy up the generic x86 PCI driver
This driver should use the x86 PCI configuration functions. Also adjust its
compatible string to something generic (i.e. without a vendor name).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-14 18:03:19 -06:00
Bin Meng
a452002259 x86: Configure VESA parameters before loading Linux kernel
Store VESA parameters to Linux setup header so that vesafb driver
in the kernel could work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
2015-07-14 18:03:19 -06:00
Bin Meng
786a08e0dd x86: Move VGA option rom macros to Kconfig
Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig
and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on
HAVE_VGA_BIOS. The new names are consistent with other x86 binary
blob options like HAVE_FSP/FSP_FILE/FSP_ADDR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Jian Luo
0e98a1473a video: Add 32-bit color depth support for VBE
The TunnelCreek IGD VBE reports 32-bit color depth regardless 24-bit
color depth is configured. Since 24-bit mode already uses 4 bytes
internally, it should be OK to just add this option in switch case.

Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-14 18:03:18 -06:00
Simon Glass
5afeb4bb45 dm: pci: Correct bus number when scanning sub-buses
The sub-bus passed to pciauto_prescan_setup_bridge() is incorrect. Fix it
so that sub-buses are numbered correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Simon Glass
aec241dfb4 dm: pci: Use the correct hose when configuring devices
Only the PCI controller has access to the PCI region information. Make sure
to use the controller (rather than any attached bridges) when configuring
devices.

This corrects a failure to scan and configure devices when driver model is
enabled for PCI.

Also add a comment to explain the problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Tom Rini
4d80051b63 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-06-08 08:37:02 -04:00
Tom Rini
d85cd29133 Merge git://git.denx.de/u-boot-dm 2015-06-05 11:21:08 -04:00