This is a follow-up patch for my "disk: don't compile in partition
support for spl/tpl if not really necessary".
"part" command is useful only if, at least, one of partition table types
is selected. So it should have a dependency on PARTITIONS which is now
automatically selected if one of partition table types is enabled.
With this change, *_defconfig which explicitly selects CMD_PART but
has no partition table types enabled should also be fixed.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Documentation:
* Document image size parameter of bootefi command
UEFI:
* avoid building partition support in SPL/TPL where not required
* improve integration of EFI subsystem and driver model
* restore ability to boot arbitrary blob
-----BEGIN PGP SIGNATURE-----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=a5qc
-----END PGP SIGNATURE-----
Merge tag 'efi-2022-07-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-07-rc1-3
Documentation:
* Document image size parameter of bootefi command
UEFI:
* avoid building partition support in SPL/TPL where not required
* improve integration of EFI subsystem and driver model
* restore ability to boot arbitrary blob
In most of all cases, we can avoid using blk_desc which is expected
to be private to udevice(UCLASS_BLK), that is, the data should not
be manipulated outside the device driver unless really needed.
Now efi_disk's internally use dev_read/write() interfaces
if CONFIG_PARTITIONS is enabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
In include/blk.h, Simon suggested:
===>
/*
* These functions should take struct udevice instead of struct blk_desc,
* but this is convenient for migration to driver model. Add a 'd' prefix
* to the function operations, so that blk_read(), etc. can be reserved for
* functions with the correct arguments.
*/
unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, void *buffer);
unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, const void *buffer);
unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt);
<===
So new interfaces are provided with this patch.
They are expected to be used everywhere in U-Boot at the end.
The exceptions are block device drivers, partition drivers and efi_disk
which should know details of blk_desc structure.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
When we create an efi_disk device with an UEFI application using driver
binding protocol, the 'efi_driver' framework tries to create
a corresponding block device(UCLASS_BLK/IF_TYPE_EFI). This will lead to
calling a PROBE callback, efi_disk_probe().
In this case, however, we don't need to create another "efi_disk" device
as we already have this device instance.
So we should avoid recursively invoke further processing in the callback
function.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This function is expected to be called, in particular from dm's pre_remove
hook, when associated block devices no longer exist.
Add efi_disk_remove() function.
This function removes an efi_disk object for a raw disk device (UCLASS_BLK)
and related objects for its partitions (UCLASS_PARTITION).
So this function is expected to be called through driver model's "remove"
interface every time a raw disk device is to be disconnected.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When we create an efi_disk device with an UEFI application using driver
binding protocol, the 'efi_driver' framework tries to create
a corresponding block device(UCLASS_BLK/IF_TYPE_EFI). This will lead to
calling a PROBE callback, efi_disk_probe().
In this case, however, we don't need to create another "efi_disk" device
as we already have this device instance.
So we should avoid recursively invoke further processing in the callback
function.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add efi_disk_probe() function.
This function creates an efi_disk object for a raw disk device (UCLASS_BLK)
and additional objects for related partitions (UCLASS_PARTITION).
So this function is expected to be called through driver model's "probe"
interface every time one raw disk device is detected and activated.
We assume that partition devices (UCLASS_PARTITION) have been created
when this function is invoked.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In the next commit, CONFIG_EFI_SETUP_EARLY will become mandated
in order to support dynamic enumeration of efi_disk objects.
This can, however, be problematic particularly in case of file-based
variable storage (efi_variable.c, default).
Non-volatile variables are to be restored from EFI system partition
by efi_init_variables() in efi_init_obj_list(). When efi_init_obj_list()
is called in board_init_r(), we don't know yet what disk devices
we have since none of device probing commands (say, scsi rescan) has not
been executed at that stage.
So in this commit, a preparatory change is made; efi_init_obj_list() is
broken into the two functions;
* efi_init_early(), and
* new efi_init_obj_list()
Only efi_init_early() will be called in board_init_r(), which allows
us to execute any of device probing commands, either though "preboot"
variable or normal command line, before calling efi_init_obj_list() which
is to be invoked at the first execution of an efi-related command
(or at efi_launch_capsules()) as used to be.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Now that all the block device drivers have enable a probe hook, we will
call part_create_block_devices() to enumerate all the partitions and
create associated udevices when a block device is detected.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
NOTE: probably we have to update config dependencies,
in particular, SPL/TPL_PRINTF?
With this new function, UCLASS_PARTITION devices will be created as
child nodes of UCLASS_BLK device.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
The new test covers all tag-related interfaces.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some basic stuff about tag support is explained under
doc/devlop/driver-model.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
ENOMEM is a more common error code for memory starvation.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
U-Boot menu framework(common/menu.c) returns 1 if it is successful,
returns negative value if it fails.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Under the current Kconfigs, disk/part.c will be compiled in even if none of
partition table types are enabled. This will lead to the size growth of SPL
/TPL code.
With this patch, CONFIG_PARTITIONS is selected only if, at least, one of
CONFIG_*_PARTITION is enabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Now we can build efi_loader with block device support (CONFIG_BLK) and
without CONFIG_PARTITIONS.
So change Makefile.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
In the current implementation, partition table support (either GPT or DOS)
is not mandatory. So CONFIG_PARTITION_UUIDS should not be enabled
(selected) unconditionally.
Fixes: commit 17f8cda505 ("efi_loader: set partition GUID in device path for SIG_TYPE_GUID")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since host_get_dev_errr() is defined in drivers/block/sandbox.c,
the associated function prototype should be in a more appropriate
header file.
Fixes: commit 4101f68792 ("dm: Drop the block_dev_desc_t typedef")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Some defconfig enables CMD_PART even if none of any partition table
types (CONFIG_*_PARTITION) are enabled.
This will lead to the size growth in SPL/TPL code since disk/part.c
will be compiled in any way.
We will change disk/Kconfig later so that CONFIG_PARTITIONS is only
enabled when, at least, one of CONFIG_*_PARTITION is enabled.
To make the build work (in particular, "part" command) correctly,
a few functions should be defined as void functions in case of
!CONFIG_PARTITIONS.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Since CONFIG_[SPL|TPL]_PARTITIONS were introduced, part.h has not been
updated. Due to this, while the build won't fail, some functionality may
possibly break as some partition-related functions are nullified even
though some partition table types are enabled for SPL/TPL.
Fixes: commit 88ca8e2695 ("disk: Add an option for partitions in SPL")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Some errno numbers are used in defining inline functions.
So "errno.h" should be explicitly included to avoid possible build errors.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
A image_size parameter has been added to the bootefi parameter.
Describe all parameters.
Correct how the description of how the device-path in the loaded
image protocol is determined.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Up until commit 5f59518a7b ("efi_loader: setting boot device"), we
could boot an arbitrary blob with bootefi. Indeed, efi_run_image() even
has a special case for missing device paths indicating a payload that
was directly loaded via JTAG, for example.
Restore the ability to inject a UEFI payload into memory and `bootefi`
it. If the address passed isn't the last PE-COFF loaded, then we'll
wipe out the pre-existing DP/Image information and let efi_run_image()
synthesize a memory device path.
An image size is required if we're booting an arbitrary payload, and
the FDT argument has been changed to accept `-`. The size could be
deduced from the image header, but it's required anyways as an explicit
acknowledgment that one's trying to boot an arbitrary payload rather
than accidentally using the wrong address in the single-addr form.
Fixes: 5f59518a7b ("efi_loader: setting boot device")
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
- Add "-q" to fdt addr and use it in distro_bootcmd to make the user
experience less scary reading in normal try/fail cases.
- Let the adc update an environment variable like many other commands do
- Fix TPL SEPARATE_BSS check when locating DTB
- Allow ":" in PXE file names again
- Two Apple M1 fixes
Unless you have a spare Apple Silicon machine, getting access to
the serial port on Apple Silicon machines requires special
hardware. Given that most machines come with a built-in screen
the framebuffer is likely to be the most convenient output device
for most users. While U-Boot will output to both serial and
framebuffer, OSes might not. Therefore set stdout-path to point
at /chosen/framebuffer when a keyboard is connected to the machine.
This behaviour can be overridden by setting the "stdout" variable
in the U-Boot environment. I addition to that keep the serial
console as the default when running under the m1n1 hypervisor.
The m1n1 hypervisor virtualizes the serial port such that it
can be easily accessed from any other machine with a USB port.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Tested-by: Janne Grunau <j@jannau.net>
Enable CONFIG_NO_FB_CLEAR to preserve the Asahi logo. Since that
logo is drawn on a black background also enable
CONFIG_SYS_WHITE_ON_BLACK such that text printed by U-Boot is still
visible.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
- U-boot's PXE flow supports prefixing your bootfile name with an
IP address to fetch from a server other than the DHCP server,
e.g. `hostIPaddr:bootfilename`:
a93907c43f
- However, this breaks bootfile paths which contain a colon, e.g.
`f0:ad:4e:10:1b:87/7/pxelinux.cfg/default`
- This patch checks whether the `hostIPaddr` prefix is a valid
IP address before overriding the serverIP otherwise the whole
bootfile path is preserved
Signed-off-by: Lyle Franklin <lylejfranklin@gmail.com>
distro_bootcmd uses this construct a few times to test $fdt_addr_r,
and fall back on $fdtcontroladdr if not set/invalid:
if fdt addr ${fdt_addr_r}; then
...
else
...
fi
If the `fdt addr` test fails, it prints the following message on the
console, suggesting there is an error when there is not:
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
To remove this potentially confusing error message, this patch adds -q
as a 'quiet' option for fdt addr, and uses this flag in
config_distro_bootcmd.h
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Add the ability to save ADC conversion result in an environment
variable. This is useful for further arbitrary processing by the
U-Boot scripts.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Commit 690af71850 changed this condition
from an explicit
IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)
to
CONFIG_IS_ENABLED(SEPARATE_BSS)
The documentation for CONFIG_IS_ENABLED() in include/linux/kconfig.h
implies that we will get the correct behaviour, but the actual behaviour
differs such that this condition is now always false.
This stopped TPL being able to load the device tree blob at least on the
ROCKPro64 board (RK3399 SoC), since the wrong device tree location was
chosen.
The issues causing this behaviour with CONFIG_IS_ENABLED() are:
1. The documentation implies that CONFIG_SPL_BUILD =>
CONFIG_SPL_<option> is considered before the TPL equivalent.
Actually, the TPL options have higher priority - see definition of
_CONFIG_PREFIX.
2. The documentation implies a fallthrough, eg. if CONFIG_SPL_BUILD is
defined but the CONFIG_SPL_<option> is not, then it will proceed to
check if CONFIG_TPL_BUILD
Actually, if CONFIG_TPL_BUILD is defined, then it stops there
and CONFIG_SPL_BUILD is not considered - see definition of
_CONFIG_PREFIX.
During TPL build, at least for the ROCKPro64, both CONFIG_TPL_BUILD
and CONFIG_SPL_BUILD are defined, but because of the above, only TPL
options are considered. Since there is no CONFIG_TPL_SEPARATE_BSS,
this fails.
Fixes: 690af71850 ("fdt: Correct condition for SEPARATE_BSS")
Signed-off-by: Andrew Abbott <andrew@mirx.dev>
If dev_count_phandle_with_args returns 0 or another error, then pd will never
have been initialized by power_domain_get_by_index. Avoid comparing against
pd.dev in this situation.
Fixes: 3e4fcfa4bc ("power-domain: fix hang in endless loop on i.MX8")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
When usb3-phy label is found, PHY driver is called and serdes line is
initialized. This is preparation for serdes/psgtr driver to configure GT
lines based on description in DT.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Allow to disable PHY driver in SPL because it checks the CONFIG_SPL_PHY
variable for SPL builds.
The same change was done for usb by commit fd09c205fc ("usb:
s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/").
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add watchdog controller driver for NPCM7xx/npcm8xx
the wdt design of npcm750 and npcm845 is the same.
so the driver can work on npcm750 and npcm845.
about npcm845 wdt dtsi i will followed kernel dts name
to use nuvoton,npcm750-wdt.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adds simple documentation about common properties for watchdog
in the device tree.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>
- Fix SPL_SYS_MALLOC_SIMPLE and non-SPL_FRAMEWORK boards (a large number
of PowerPC platforms)
- Remove duplication of crc16 functionality
- Migrate COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY and have it in
Kconfig
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enough space to load kernel images bigger than 32MB change the
variables to a feasible value.
The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".
The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In arch/arm/mach-imx/imx8m/soc.c there's an implementation of
board_fix_fdt() introduced by commit 35bb60787b. Remove the
redundant one to avoid failed to build from source when enabling
CONFIG_OF_BOARD_FIXUP.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Since COUNTER_FREQUENCY is obselete, so set cntfrq_el0 if
CONFIG_COUNTER_FREQUENCY is valid
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
