Commit graph

76 commits

Author SHA1 Message Date
Masahisa Kojima
9897350c52 efi_loader: expose END device path node
This commit exposes the END device path node.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-07-13 20:07:07 +02:00
Rui Miguel Silva
bfef72e4dd cmd: load: add load command for memory mapped
cp.b is used a lot as a way to load binaries to memory and execute
them, however we may need to integrate this with the efi subsystem to
set it up as a bootdev.

So, introduce a loadm command that will be consistent with the other
loadX commands and will call the efi API's.

ex: loadm $kernel_addr $kernel_addr_r $kernel_size

with this a kernel with CONFIG_EFI_STUB enabled will be loaded and
then subsequently booted with bootefi command.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-06-22 11:35:47 -04:00
Heinrich Schuchardt
72fa9cd59e efi_loader: create boot options without file path
Allow the efidebug command to create boot options without file path, e.g.

    efidebug boot add -b 0001 'short dev only' host 0:1 ''
    efidebug boot add -B 0002 'long dev only' host 0:1 ''

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-06-12 13:02:34 +02:00
AKASHI Takahiro
7a06fd7579 efi_loader: PARTITION_UUIDS should be optional
In the current implementation, partition table support (either GPT or DOS)
is not mandatory. So CONFIG_PARTITION_UUIDS should not be enabled
(selected) unconditionally.

Fixes: commit 17f8cda505 ("efi_loader: set partition GUID in device path for SIG_TYPE_GUID")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-04-23 22:05:34 +02:00
Heinrich Schuchardt
df96deeed6 efi_loader: typo devie-path
%s/devie-path/device-path/

Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26 07:46:21 +01:00
Heinrich Schuchardt
e46ef1db9e efi_loader: efi_dp_find_obj() add protocol check
Let function efi_dp_find_obj() additionally check if a given protocol is
installed on the handle relating to the device-path.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
c409593d08 efi_loader: fix efi_dp_find_obj()
efi_dp_find_obj() should not return any handle with a partially matching
device path but the handle with the maximum matching device path.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
8399488672 efi_loader: export efi_dp_shorten()
Rename function shorten_path() to efi_dp_shorten() and export it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Simon Glass
e2bceb0331 efi: Drop unnecessary calls to blk_find_device()
When we have the block descriptor we can simply access the device. Drop
the unnecessary function call.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-02-05 20:20:01 +01:00
Simon Glass
377d39d178 efi: Use device_get_uclass_id() where appropriate
Use this function rather than following the pointers, since it is there
for this purpose.

Add the uclass name to the debug call at the end of dp_fill() since it is
quite useful.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-02-05 20:20:01 +01:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Masahisa Kojima
ce3dbc5d08 efi_loader: add UEFI GPT measurement
This commit adds the UEFI GPT disk partition topology
measurement required in TCG PC Client Platform Firmware
Profile Specification

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26 21:32:46 +02:00
Heinrich Schuchardt
db61e70e0d efi_loader: efi_dp_from_lo() should skip VenMedia node
The 'efidebug boot dump' command should not display the VenMedia() device
path node preceding the device path of the initial ram disk.

By letting efi_dp_from_lo() skip the VenMedia() device path node we can
simplify the coding.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-21 03:46:04 +02:00
Heinrich Schuchardt
05345425ca efi_loader: efi_dp_from_lo() unused parameter size
Parameter size is never used in function efi_dp_from_lo(). Remove it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-21 03:46:04 +02:00
Heinrich Schuchardt
0421735dd8 efi_loader: efi_dp_from_lo() don't copy GUID
Instead of copying a GUID and then using a pointer to the copy for calling
guidcmp(), just pass the pointer to the orginal GUID.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21 03:46:04 +02:00
Simon Glass
c779e0d923 efi_loader: Drop code that doesn't work with driver model
This code should never have been added as it builds a new feature on top
of legacy code. This has already been improved with the dependency on BLK.

Add a dependency on DM_ETH also, to avoid needing to deal with this old
code.

Boards which want EFI_LOADER should migrate to driver model first.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-21 03:46:03 +02:00
Heinrich Schuchardt
426a15893f efi_loader: use EfiBootServicesData for device path
dp_alloc() was using a constant from the wrong enum resulting in creating
device paths in EfiReservedMemory.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-08-17 17:24:08 +02:00
Alfonso Sánchez-Beato
17f8cda505 efi_loader: set partition GUID in device path for SIG_TYPE_GUID
Previously, the GPT device GUID was being used instead of the partition,
which was incorrect.

Signed-off-by: Alfonso Sánchez-Beato <alfonso.sanchez-beato@canonical.com>

Let EFI_LOADER select CONFIG_PARTITION_UUIDS.
Use log_warning() instead of printf() for warning.
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-07-18 14:43:56 +02:00
Heinrich Schuchardt
9a6b33bef2 efi_loader: path length in efi_dp_from_name()
Before this patch efi_dp_from_name() only accommodated a maximum file path
length of 31 characters. This leads to boot failures due to file name
truncation.

Allow arbitrary path lengths.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-25 13:06:57 +02:00
Ilias Apalodimas
76e8acce12 efi_loader: Add device path related functions for initrd via Boot####
On the following patches we allow for an initrd path to be stored in
Boot#### variables.  Specifically we encode in the FIlePathList[] of
the EFI_LOAD_OPTIONS for each Boot#### variable.

The FilePathList[] array looks like this:
kernel - 0xff - VenMedia(initrd GUID) - initrd1 - 0x01 initrd2 - 0xff
So let's add the relevant functions to concatenate and retrieve a device
path based on a Vendor GUID.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reformat function descriptions.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:14:25 +01:00
Heinrich Schuchardt
f027222ad8 efi_loader: Uart device path
When uploading an EFI binary via the UART we need to assign a device path.

* Provide devicepath node to text conversion for Uart() node.
* Provide function to create Uart() device path.
* Add UART support to efi_dp_from_name().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:09:17 +01:00
Simon Glass
0fd3d91152 dm: Use access methods for dev/uclass private data
Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-01-05 12:24:40 -07:00
Simon Glass
8b85dfc675 dm: Avoid accessing seq directly
At present various drivers etc. access the device's 'seq' member directly.
This makes it harder to change the meaning of that member. Change access
to go through a function instead.

The drivers/i2c/lpc32xx_i2c.c file is left unchanged for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-18 20:32:21 -07:00
Simon Glass
caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00
Heinrich Schuchardt
5cad4a3093 efi_loader: efi_dp_check_length()
We need to check that device paths provided via UEFI variables are not
malformed.

Provide function efi_dp_check_length() to check if a device path has an
end node within a given number of bytes.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-24 16:37:53 +02:00
Heinrich Schuchardt
bf3bcef7fb efi_loader: device path for SATA devices
Provide device path nodes for SATA devices.

This avoids creation of two handles with the same device path indicating
our root node.

This is what the device paths for a SATA drive with four partitions could
like:

/VenHw(..)/Sata(0x0,0xffff,0x0)
/VenHw(..)/Sata(0x0,0xffff,0x0)/HD(1,MBR,0x81ea591f,0x800,0x63ff830)
/VenHw(..)/Sata(0x0,0xffff,0x0)/HD(2,MBR,0x81ea591f,0x6400800,0x9ff830)
/VenHw(..)/Sata(0x0,0xffff,0x0)/HD(3,MBR,0x81ea591f,0x6e00800,0x16ef2ab0)
/VenHw(..)/Sata(0x0,0xffff,0x0)/HD(4,MBR,0x81ea591f,0x1dcf3800,0x1dcedab0)

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21 10:00:17 +02:00
Heinrich Schuchardt
19ecced71c efi_loader: device path for virtio block devices
The UEFI specification does not define a device sub-type for virtio.
Let's use a vendor hardware node here.

This avoids creation of two handles with the same device path indicating
our root node.

Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-21 10:00:17 +02:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0528979fa7 part: Drop disk_partition_t typedef
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Heinrich Schuchardt
549b79e8e0 efi_loader: remove redundant assignment in dp_fill()
The value of dp is overwritten without being used.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-07 18:23:16 +02:00
Heinrich Schuchardt
246e601846 efi_loader: remove unused function efi_dp_from_dev()
Function efi_dp_from_dev() is not used anywhere. Remove it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-19 12:10:22 +01:00
Heinrich Schuchardt
cab6f06c14 efi_loader: fix efi_dp_from_name()
Correctly check the return value of efi_dp_from_file().
If we can determine device path for the file, should not depend on the
device path for the device being requested.
Provide a function description for efi_dp_from_name().

Reported-by: Coverity CID 273159, CID 273158
Fixes: 08c51fff30 ("efi_loader: device_path: check against file path length")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-12 23:13:54 +01:00
AKASHI Takahiro
08c51fff30 efi_loader: device_path: check against file path length
device_path strcuture has 2 bytes of "length" field, and so
file path length should not exceed this limit, 65535.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17 19:19:55 +02:00
Patrick Wildt
f2d247df50 efi: device path for nvme
This allows our EFI API to create a device path node for NVMe
devices.  It adds the necessary device path struct, uses the
nvme namespace accessor to retrieve the id and eui64, and also
provides support for the device path text protocol.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-06 16:02:37 +02:00
AKASHI Takahiro
23ad52fff4 efi_loader: device_path: support Sandbox's "host" devices
Sandbox's "host" devices are currently described as UCLASS_ROOT udevice
with DEV_IF_HOST block device. As the current implementation of
efi_device_path doesn't support such a type, any "host" device
on sandbox cannot be seen as a distinct object.

For example,
  => host bind 0 /foo/disk.img

  => efi devices
  Scanning disk host0...
  Found 1 disks
  Device           Device Path
  ================ ====================
  0000000015c19970 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)
  0000000015c19d70 /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)

  => efi dh
  Handle           Protocols
  ================ ====================
  0000000015c19970 Device Path, Device Path To Text, Device Path Utilities, Unicode Collation 2, HII String, HII Database, HII Config Routing
  0000000015c19ba0 Driver Binding
  0000000015c19c10 Simple Text Output
  0000000015c19c80 Simple Text Input, Simple Text Input Ex
  0000000015c19d70 Block IO, Device Path, Simple File System

As you can see here, efi_root (0x0000000015c19970) and host0 device
(0x0000000015c19d70) have the same representation of device path.

This is not only inconvenient, but also confusing since two different
efi objects are associated with the same device path and
efi_dp_find_obj() will possibly return a wrong result.

Solution:
Each "host" device should be given an additional device path node
of "vendor device path" to make it distinguishable.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20 20:09:18 +02:00
Heinrich Schuchardt
d0384d5160 efi_loader: correctly render CD-ROM device path nodes
Correct the name of the partition size component in struct
efi_device_path_cdrom_path.

Render entry, start, and size when converting a CD-ROM device path node to
text.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-05 23:18:51 +02:00
Heinrich Schuchardt
046fe7b507 efi_loader: efi_dp_from_file() expect UTF-8 path
Properly convert UTF-8 file names to UTF-16.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-16 22:17:23 +00:00
Heinrich Schuchardt
7d1e4b73e3 efi_loader: check length in CreateDeviceNode()
When creating a device path node ensure that the size of the allocated
memory at lest matches the size of the node header.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:51:01 +02:00
AKASHI Takahiro
f86076d885 efi_loader: efi_setup_loaded_image() handle missing file name
This is a preparatory patch.

efi_dp_split_file_path() is used to create device_path and file_path
from file_path for efi_setup_loaded_image().
In a special case, however, of HARDWARE_DEVICE/MEMORY, it doesn't
work expectedly since this path doesn't contain any FILE_PATH sub-type.

This patch makes a workaround.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Adjust the logic such that for all paths that do no end on a media file
path we return NULL as file_path.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
Patrick Delaunay
74f5baa28b efi_loader: add protection for block_dev
Check the value of block_dev before to use this pointer.

This patch solves problem for the command "load" when ubifs
is previously mounted: in this case the function
blk_get_device_part_str("ubi 0") don't return error but return
block_dev = NULL and then data abort.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12 22:00:42 +02:00
Heinrich Schuchardt
2337741fb4 efi_loader: remove stray #define LOG_CATEGORY LOGL_ERR
The statement '#define LOG_CATEGORY LOGL_ERR' makes not sense. LOGL_ERR is
not a LOG_CATEGORY. Remove the statement.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12 22:00:41 +02:00
Heinrich Schuchardt
30a231dcce efi_loader: do not add \ in efi_fs_from_name()
In the `efidebug boot add` command we do not want an unsolicited leading
backslash added to the file name.

There is no good reason to mark a loaded file with a backslash as absolute.
Anyway when reading files the file name will be interpreted as relative to
root directory of the device.

So let's get rid of this backslash.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-02 23:34:26 +01:00
Heinrich Schuchardt
caf6d2fd1a efi_loader: efi_dp_split_file_path() error handling
If the path passed to efi_dp_split_file_path() does not contain a
reference to a file it returns EFI_OUT_OF_RESOURCES. This does not properly
indicate the kind of the problem that occurred. Return
EFI_INVALID_PARAMETER instead.

Update function description.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-16 15:42:19 +01:00
AKASHI Takahiro
2419b161cc efi_loader: allow device == NULL in efi_dp_from_name()
This is a preparatory patch for use in efi_serialize_load_option()
as a load option's file_path should have both a device path and
a file path.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-03 00:13:15 +01:00
Heinrich Schuchardt
eb3bc8bb17 efi_loader: fix typos in efi_device_path.c
Fix some typos in comments.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
AKASHI Takahiro
f1589ffb33 efi_loader: add efi_dp_from_name()
Factor out efi_set_bootdev() and extract efi_dp_from_name().
This function will be used to set a boot device in efishell command.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Heinrich Schuchardt
fae0118e7a efi_loader: eliminate handle member
A pointer to a struct efi_object is a handle. We do not need any handle
member in this structure. Let's eliminate it.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:36 +01:00
Heinrich Schuchardt
d081f27fc2 efi_loader: efi_dp_get_next_instance() superfluous statement
Remove a superfluous statement in efi_dp_get_next_instance().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16 22:56:18 +02:00
Heinrich Schuchardt
4e6b5d6503 efi_loader: create root node
Currently we assign a lot of protocols to loaded images though
these protocols are not related to them. Instead they should be
installed on a separate handle. Via the device path it is the
parent to the devices like the network adapter.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:31 +02:00