Commit graph

30 commits

Author SHA1 Message Date
Patrick Delaunay
5d2901a4b6 stm32mp1: Add remoteproc support for m4 coprocessor
Alignment with kernel patch proposal for binding:

[PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c
https://lkml.org/lkml/2019/5/14/159

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
a09fb8716c stm32mp1: configs: add CONFIG_CMD_BMP
Activate command BMP for splash screen support

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
1e1173d964 stm32mp1: configs: add BACKLIGHT_GPIO support
Backlight of panel raydium RM68200 is controlled by a simple gpio,
thus we activate the support for the needed driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
28ea00b1df stm32mp1: configs: add CONFIG_DM_VIDEO
Activate command DM_VIDEO for LCD support

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
f337403ff3 stm32mp1: configs: Deactivate SPI_FLASH_BAR
Remove CONFIG_SPI_FLASH_BAR as the SPI NOR layer uses stateless
4 byte opcodes by default.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
16a0722320 stm32mp1: configs: select CONFIG_STM32_SERIAL
Select the serial driver mandatory for the console.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
1f99eaff08 rtc: Add rtc driver for stm32mp1
Add support of STM32MP1 rtc driver.
Enable it for basic and trusted configurations.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
2019-07-22 11:04:52 +02:00
Patrick Delaunay
9bb9ad2d63 configs: stm32mp15: enable stm32 remoteproc
Activate the remote processor support for stm32mp15 configs.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22 11:04:31 +02:00
Patrick Delaunay
e81f8d16e2 stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONS
Update kernel MTD partition in device tree with U-Boot information.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:53 +02:00
Patrick Delaunay
ca351e705a stm32mp1: deactivate WATCHDOG in defconfig
Deactivate WATCHDOG by default in u-boot to avoid issue to boot kernel
and rootfs without the needed daemon to reload it.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12 11:18:53 +02:00
Fabien Dessenne
8da622d818 configs: stm32mp15: enable IPCC mailbox
Activate the ipcc mailbox for stm32mp15 configs.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12 11:18:53 +02:00
Markus Klotzbuecher
ff4818cc3e env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND
Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining
the name of the UBI volume used to store the redundant environment.

Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kmpark@infradead.org>

hs: get rid of stm32mp1* build errors
2019-07-09 07:00:05 +02:00
Patrice Chotard
29dff4d455 configs: stm32mp15: Select correct Ethernet driver for trusted mode
Select the correct Ethernet driver from Synopsis.
Initially, "Synopsys Designware Ethernet MAC" driver was wrongly
selected instead of "Synopsys DWC Ethernet QOS device" driver.

Fixes: commit f90b3f5b68 ("configs: stm32mp15: Enable Ethernet feature")

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-18 16:38:08 +02:00
Christophe Roullier
f90b3f5b68 configs: stm32mp15: Enable Ethernet feature
This allows to enable Ethernet and use driver for
Synopsys Ethernet QoS device

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-06-06 17:40:19 +02:00
Patrice Chotard
5bf11b58fe configs: stm32mp15: Enable SPI relative flags
Enable STM32_SPI, SPI, DM_SPI and CMD_SPI flags.
This enables the SPI support for STM32MP15.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:18 +02:00
Patrice Chotard
ca9c5dccb7 configs: stm32mp15: Enable WDT flags
This allows to enable WATCHDOG and WDT flags to
be able to reset the watchdog and to support watchdog driver
model.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:16 +02:00
Patrice Chotard
baf053f937 configs: stm32mp15: Enable ENV_IS_SPI_FLASH
Add all relative flags needed by ENV_IS_IN_SPI_FLASH

Reserved a 256KB partition in NOR to save the U-Boot
environment.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:15 +02:00
Patrice Chotard
80dfdb9c97 configs: stm32mp15: Enable ENV_IS_IN_UBI
Add all relative flags needed by ENV_IS_IN_UBI

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:15 +02:00
Patrick Delaunay
df23da5918 configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags
Enable ENV_IS_IN_EXT4 and all relative flags to be able to
load/save environment in EXT4 partition.

This will allows to load/save environment on both sdcard and eMMC.
As for stm32mp15, bootfs has not the same partition number on sdcard
and on eMMC, we use "auto" key which allows to find the first
partition in device with bootable flag which is partition 4 on sdcard
and partition 2 on eMMC.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:14 +02:00
Patrick Delaunay
c4a739ad50 stm32mp1: activate NAND and NOR support on EV1
Add the necessary configuration to have NAND and NOR support on ev1 board
for BASIC boot (with SPL) or for TRUSTED boot (with TF-A).

STM32MP> nand info

Device 0: nand0, sector size 256 KiB
  Page size       4096 b
  OOB size         224 b
  Erase size    262144 b
  subpagesize     4096 b
  options     0x00184200
  bbt options 0x00060000

STM32MP> sf probe
SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-06 17:40:12 +02:00
Alex Kiernan
623de3f086 Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig
This converts the following to Kconfig:
   CONFIG_SUPPORT_EMMC_BOOT

As requested by Michal Simek <michal.simek@xilinx.com>, these boards
have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated:

  xilinx_zynqmp_zc1275_revB
  xilinx_zynqmp_zc1751_xm018_dc4
  xilinx_zynqmp_zc1751_xm019_dc5
  xilinx_zynqmp_zcu100_revC
  xilinx_zynqmp_zcu102_rev1_0
  xilinx_zynqmp_zcu102_revA
  xilinx_zynqmp_zcu102_revB
  xilinx_zynqmp_zcu104_revA
  xilinx_zynqmp_zcu104_revC
  xilinx_zynqmp_zcu106_revA
  xilinx_zynqmp_zcu111_revA

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-04 13:04:12 -04:00
Patrick Delaunay
c31000c534 stm32mp1: migrate USBOTG device to driver model
Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
995d228bce stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO
Remove the HOST support for STM32MP1 USBO device = OTG DWC2.
The current DWC2 driver have no dynamic detection of device,
So it is dangerous to have start 3V3 when PC is
connected to the micro USB connector.

=> it is preferable to have only DEVICE support
   CONFIG_USB_GADGET_DWC2_OTG for OTG port

See DWC3 driver for clean dual role support...

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
8c3ff9ba02 config: stm32mp15: Enable STMFX support
Activate PINCTRL_STMFX and needed part for generic pincontrol
PINCTRL_FULL, PINCONF. Increase pre-reloc memory for MALLOC
(needed for each DM pinconfig node).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
42f01aacfd power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
a53d9f8f90 stm32mp1: activated some configuration
Add configuration useful for test
- FIT support
- MEMTEST
- DFU
- CACHE
- TIME
- TIMER

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
4633fd51c5 stm32mp1: activate FASTBOOT on eMMC
activate Fastboot for eMMC on EV1 board (mmc1)

$> sudo apt-get install android-tools-adb android-tools-fastboot
$> fastboot -i 0x0483 getvar bootloader-version

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
842ebb5f40 stm32mp1: update bootcmd
Clearly separate bootcmd for stm32mp1 board
(bootcmd_stm32mp) and preboot management.
That solve issue for fastboot continue command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
45ccdb6fc7 stm32mp1: cosmetic cleanup Kconfig
Cosmetic cleanup in mach-stm32mp Kconfig
- remove duplicated SPL_DRIVERS_MISC_SUPPORT
- update help for TARGET_STM32MP1
- set value for NR_DRAM_BANKS
- remove one comment as DEBUG_UART is deactivated by default
- include board Kconfig at the end of the file

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
abf2678f0f stm32mp1: add trusted boot with TF-A
Add support of trusted boot, using TF-A as first stage bootloader,
The boot sequence is
  BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32

The TF-A monitor provides secure monitor with support of SMC
- proprietary to manage secure devices (BSEC for example)
- PSCI for power

The same device tree is used for STMicroelectronics boards with
basic boot and with trusted boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00