Commit graph

19 commits

Author SHA1 Message Date
Neil Armstrong
8f5e9de121 ARM: meson: Add support for Odroid-N2L
ODROID-N2L is a variant SBC in small form factor and some peripherals
are removed from ODROID-N2PLUS based on S922X SoC.

- On-board ethernet is removed
- On-board RTC is removed
- USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports
  are available
- Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink
  is recommended or a tall passive sink is optional
- 3.5mm earjack is removed
- IR remote receiver is removed
- MIPI DSI port is added

It doesn't use the odroid-n2 board support since ADC revision
collides with Odroid-N2+ and since it doesn't have on-board ethernet
no need to load the MAC address from eFuses.

Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-2-c60f695e0f6c@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-30 14:24:17 +01:00
Neil Armstrong
640192d04f ARM: meson: add support for Odroid Go Ultra
This adds initial support for the Hardkernel Odroid Go Ultra.

The Odroid Go Ultra is a portable gaming device with the following
characteristics:
- Amlogic S922X SoC
- RK817 & RK818 PMICs
- 2GiB LPDDR4
- On board 16GiB eMMC
- Micro SD Card slot
- 5inch 854×480 MIPI-DSI TFT LCD
- Earphone stereo jack, 0.5Watt 8Ω Mono speaker
- Li-Polymer 3.7V/4000mAh Battery
- USB-A 2.0 Host Connector
- x16 GPIO Input Buttons
- 2x ADC Analog Joysticks
- USB-C Port for USB2 Device and Charging

The following are not yet handled:
- Battery RK818 Gauge and Charging
- 5inch 854×480 MIPI-DSI TFT LCD

Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-20 16:27:40 +01:00
Tom Rini
af7d151b8e - fixup error on efuse commands return
- add documentation on boot flow
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmLyGKIACgkQd9zb2sjI
 SdF3zxAAlmTUYq0shBth7EimdNTxfx2yRBgmNPvaIh1Q1mADUH9vzmtKcqKoz2sT
 dzYIa6NPSrrKp5QjgOzMU4nMFr+uBT5AVSGE8bkCko1hDexUjHt8p2Ai8aizNYkP
 3EQMIgRsOrwNIB+WC7YwqxtKSKAaEfHKyPeEjY9gbJo5AakiE5Z9mO+sOLbQk4pd
 jNC/x8Aj7UzAkQATj2+Nl3f4fw0/es906yQ+yruizIFBY5Sgoqgc1qghaW4+7QBN
 8dsd+l6/HmDtXeg3XmsuNhCZCVDTpilKhBw9ZS3jResgLJP8v24XL/cFdlGGEZNE
 KZUayACh881JmqPExhqKhuCCOig9/e0Zyn5rebKuD8KFvHb3KFRnxgdMyiWE81Io
 L5rJZ+0NMy5s8gNGqQsrOoYu00FXDQK7+pnTtxNmD/o1Gam2F4YDlOFig5PPmLDU
 MVNofk1I3/wecPa83/g949TPDlE0uOBN/zJhNQ6nqR4v7i9gLvGo5QgLAdBbqqo1
 fqpDWJ7ucjYFTKdDHVn4A8Jpr4OVQSt3oKE3SlfN7iLHtDqjploT/KT/U7QAJqbe
 ieE9SeuABPskckm+ECH1Njji2hVtjww6dXJ17hoBWmzGtbR8hvGesQxVHPwQMg5C
 toYJNn4Rhhi1/uM+kZ/7oPO4n3Q1PSmpSZGqkj1ioq2C2kNUjLk=
 =261y
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20220809' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- fixup error on efuse commands return
- add documentation on boot flow
2022-08-09 08:14:09 -04:00
Philippe Boos
818055fd4e watchdog: add amlogic watchdog support
Add support for hardware watchdog timer for Amlogic SoCs.
This driver has been heavily inspired by his Linux equivalent
(meson_gxbb_wdt.c).

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Signed-off-by: Philippe Boos <pboos@baylibre.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-21 08:09:06 +02:00
Neil Armstrong
647ba68841 doc: board: amlogic: add documentation on boot flow
This is a preliminary documentation introducing different
boot sequences, and notably the recovery mode.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20220706093649.3261229-1-narmstrong@baylibre.com
2022-07-07 10:09:40 +02:00
Vyacheslav Bocharov
39a40a90c8 doc: boards: amlogic: update documentation for ADC support for AXG
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220426052633.3027932-1-adeep@lexina.in
2022-04-26 09:29:14 +02:00
Neil Armstrong
4c60512ad9 doc: boards: amlogic: Add documentation on pre-generated FIP files
It add documentation on licencing & provides links to the amlogic-boot-fip
pre-built files collections.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-03-20 11:03:06 +01:00
Christian Hewitt
506fd30740 doc: boards: amlogic: update for Radxa Zero
Add documentation bits for the Radxa Zero

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: updated u200 MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:46 +02:00
Vyacheslav Bocharov
2ae382285b ARM: amlogic: add JetHub D1/H1 docs
Fix doc/board/amlogic/index.rst:
- Add S905W to S905X column.
- Add JetHub devices to the corresponding columns.
- Fix tabs to spaces for table alignment

Add doc/board/amlogic files:
- jethub-j100.rst
- jethub-j80.rst

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
fe8b4c1080 ARM: amlogic: add Banana Pi M5
Banana Pi BPI-M5 is a credit card format SBC with the following features:
- Amlogic S905X3 quad core Cortex-A55
- Mali-G31 GPU
- 4GB LPDDR4
- 16GB eMMC flash
- 4 USB 3.0
- 1 GbE ethernet
- HDMI output
- 2x LEDS
- SDCard
- 2.5mm Jack with Stereo Audio + CVBS
- Infrared Received
- ADC Button
- GPIO Button
- 40 pins header + 3pins debug header

[narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
2c9269b14b ARM: meson: add Beelink GS-King X board
The Beelink GS-King X is a variant of the GS King boards but with an internal
USB to SATA bridge and advanced audio features.

[narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:32 +02:00
Neil Armstrong
76bb027802 doc: boards: amlogic: update for Odroid HC4
Add documentation bits for the Odroid-HC4.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:28 +02:00
Neil Armstrong
fcf3c9deae boards: amlogic: update documentation for PCIe support
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-19 16:59:33 +02:00
Christian Hewitt
702b8300f0 boards: amlogic: update documentation for Beelink GT-King/Pro
Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:55 +01:00
Christian Hewitt
d412a6015e boards: amlogic: update documentation for WeTek Core2
Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: added wetek-core2.rst to q200 MAINTAINERS and added blank lines to fix build]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Jerome Brunet
ade0100a91 arm64: meson: add support for libretech-cc v2
Add support for the Amlogic based libretech cc version 2.
As version 1, it is based on the s905x SoC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: Fixed libretech-cc.rst bullet points]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Neil Armstrong
82aec2e53c doc: board: amlogic: Update support matrix
Update the matrix table with new supported features and
new SoC features to support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-05 16:26:02 +01:00
Christian Hewitt
8888d83773 boards: amlogic: add Odroid C4 support
Odroid C4 is an Amlogic SM1 device, the board config and board documentation
are adapted from the Odroid-N2 support from the same vendor.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: fix odroid-c4.rst typos and structure]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00
Neil Armstrong
0ce3639d6f board: amlogic: move boards doc into doc/board/amlogic
Move the natural text Amlogic board README files to doc/board/amlogic
into reStructuredText and :
- add reStructuredText markup for bash code
- fix secondary titles markup
- move board support into global support matrix

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00