Commit graph

18974 commits

Author SHA1 Message Date
Adam Ford
59028798ab ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit
The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also
known as the RZ/G2M.

The kit consists of a SOM + Baseboard and supports microSD,
eMMC, Ethernet, a couple celular radios, two CAN interfaces,
Bluetooth and WiFi.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25 14:19:26 +02:00
Adam Ford
3aabb0c3f1 ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1
This patch imports the device tree and required bindings to permit
the device tree to build for the R8Z774A1 (RZ/G2M).

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25 11:16:39 +02:00
Adam Ford
dbabfcc873 ARM: renesas: Add basic R8A774A1 Support
In order to build boards based on the R8A774A1, there needs to
be a config option from which to enable other drivers and/or flags
for this SoC.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25 11:16:39 +02:00
Tom Rini
ada61f1ee2 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Fix SiFive HiFive Unleashed board booting failure problem.
- Enable SiFive fu540 PWM driver.
- Support SiFive fu540: SPI boot.
- Update OpenSBI used for RISC-V CI testing.
- Revert "riscv: Allow use of reset drivers".
- Revert "Revert "riscv: sifive: fu540: Add gpio-restart support"".
- sysreset: syscon:
        - Don't assume default value for offset and mask property.
        - Support value property.
- qemu: Add syscon reboot and poweroff support.
- Fix SIFIVE debug serial dependency.
- Fix linking error when building u-boot-spl with no SMP support.
- AE350 use fdtdec_get_addr_size_auto_noparent to parse smc reg.
- Make memory node available to SPL in hifive-unleashed-a00-u-boot.dtsi
- SiFive fu540 avoid using hardcoded ram base and size.
2020-07-24 08:43:08 -04:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Bin Meng
142dd57c5d riscv: dts: hifive-unleashed-a00: Make memory node available to SPL
Make memory node available to SPL in prepration to updates to SiFive
DDR RAM driver to read memory information from DT.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-24 14:56:29 +08:00
Leo Yu-Chi Liang
e491e15a3f riscv: Fix linking error when building u-boot-spl with no SMP support
Switch off SMP support when building u-boot-spl would cause linking error as follow:
undefined reference to 'secondary hart relocate' and 'smp_call_function'.
Add macro to wrap up proper code region that needs SMP configuration on.

Signed-off by: Leo Liang <ycliang@andestech.com>
Cc: rick@andestech.com
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-07-24 14:56:13 +08:00
Bin Meng
6b62495026 Revert "riscv: Allow use of reset drivers"
This reverts commit 958a3f464c.

A more appropriate change below is already in mainline.
Commit fd31e4fd18 ("riscv: Do not build reset.c if SYSRESET is on")

Revert this patch, so that U-Boot can be built successfully for
SiFive Fu540 board.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Leo Liang <ycliang@andestech.com>
2020-07-24 14:55:31 +08:00
Jagan Teki
ff7d25e8db env: Enable SPI flash env for SiFive FU540
SPI flash device on HiFive Unleashed has 32MiB Size.

This patch adds SPI flash environment after U-Boot proper
partition with a size of 128KiB.

SPI flash partition layout(32MiB):
    0 - 34	: reserved for GPT header
   35 - 39	: unused
   40 - 2087	: loader1 (SPL, FSBL)
 2088 - 10279	: loader2 (U-Boot proper, U-Boot)
10280 - 10535	: environment
10536 - 65494	: rootfs
65528 - 65536	: distro script

Note: the loader1 must start from 40th sector even though
there are 6 free sectors prior since 40th sector is nearest
flash sector boundary. 

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-24 14:55:19 +08:00
Jagan Teki
4243ff11fe sifive: fu540: Add Booting from SPI
Add booting from SPI for SiFive Unleashed board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-24 14:55:19 +08:00
Bin Meng
a0018fc820 riscv: Make SiFive HiFive Unleashed board boot again
Commit 40686c394e ("riscv: Clean up IPI initialization code")
caused U-Boot failed to boot on SiFive HiFive Unleashed board.

The codes inside arch_cpu_init_dm() may call U-Boot timer APIs
before the call to riscv_init_ipi(). At that time the timer register
base (e.g.: the SiFive CLINT device in this case) is unknown yet.

It might be the name riscv_init_ipi() that misleads people to only
consider it is related to IPI, but in fact the timer capability is
provided by the same SiFive CLINT device that provides the IPI.
Timer capability is needed for both UP and SMP.

Considering that the original refactor does have benefits, that it
makes the IPI code more similar to U-Boot initialization idioms.
It also removes some quite ugly macros. Let's do the minimal revert
instead of a complete revert, plus a fixes to arch_cpu_init_dm() to
consider the SPL case.

Fixes: 40686c394e ("riscv: Clean up IPI initialization code")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Leo Liang <ycliang@andestech.com>
2020-07-24 14:55:04 +08:00
Tom Rini
5d3a21df66 binman support for FIT
new UCLASS_SOC
 patman switch 'test' command
 minor fdt fixes
 patman usability improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl8V+WQRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebNgAgAmgHHPakg1fkJT8xZkbPD53r21t5fkF7h
 JTLVU93BKfC+Zz2bbizCEkCl9L9bdHSaSzJY5rb07E24yV/zwDcIkRApCmkDjVHN
 EHOb0P36Ht9acowSd5kN66wd2z0Q/V+7lfEdB6Adtprh0vVaWIKYtLPxogpRv6k9
 l/CaGsBCwvupmPeHZcE3pVQlflbKyYzp62VObEBI4RIJLisvDXaPRUcBa4vz904P
 yu0baIYW8hWBcZhb0Lkex/9x7ys2T1bnnw8G7WL05GtHSZfVvT46Y70o+3i5ycBh
 GAI93Lx4r1gCjol9LVE4i1bewbPiMqyNXOtKGPRt/IIvYI4HZ67lFA==
 =YIpM
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm

binman support for FIT
new UCLASS_SOC
patman switch 'test' command
minor fdt fixes
patman usability improvements
2020-07-23 15:56:06 -04:00
Tom Rini
95fc1f1647 Merge tag 'u-boot-rockchip-20200722' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- New rk3326 board: Hardkernel Odroid Go2;
- Update board config and dts for RockPI 4/N8/N10;
- Update led boot on support for roc-rk3399-pc;
- Enable SPI Flash suppor for rk3328 rock64 board;
- Update rockchip pcie phy to use generic framework;
2020-07-22 11:30:52 -04:00
Jagan Teki
318392a745 arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10
Add u-boot,spl-boot-order for ROCKPi N10, so-that it can able
to boot from eMMC and SDMMC in order.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
e1e1c3de24 arm64: dts: rockchip: Add PCIe for RockPI N10
This patch adds support to enable PCIe for RockPI N10.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
5217f4991e arm: dts: rockchip: Add HDMI out for RockPI N8/N10
This patch adds support to enable HDMI out for
N10 and N8 combinations SBCs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
87027292c1 ARM: dts: rockchip: Add USB for RockPI N8/N10
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0
ports.

This patch adds support to enable all these USB ports for
N10 and N8 combinations SBCs.

Note that the USB 3.0 port on RockPI N8 combination works
as USB 2.0 OTG since it is driven from RK3288.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
4b0446d57f ARM: dts: rockchip: Add usb host0 ohci node for rk3288
rk3288 and rk3288w have a usb host0 ohci controller.

Although rk3288 ohci doesn't actually work on hardware, but
rk3288w ohci can work well.

So add usb host0 ohci node in rk3288 dtsi and the quirk in
ohci platform driver will disable ohci on rk3288.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Suniel Mahesh
e70d826c06 arm: dts: rockchip: Sync rk3288 dtsi from linux
This sync has changes required to use HDMI CEC pin in U-Boot.

Sync dts from linux v5.8-rc5 commit:
	"ARM: dts: rockchip: define the two possible rk3288 CEC pins"
	(sha1: 838980dd04e994bf81cf104fa01ae60802146b39)

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
2710779efd ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux
Sync ROCKPi N8/N10 dts(i) changes from Linux.

commit <afd9eb880414> ("ARM: dts: rockchip: Add Radxa Rock Pi N8 initial
support")

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
e230c579a3 rockchip: Separate the reset cause from display cpuinfo
reset cause is a generic functionality based on the soc
cru registers in rockchip. This can be used for printing
the cause of reset in cpuinfo or some other place where
reset cause is needed. 

Other than cpuinfo, reset cause can also be using during
bootcount for checking the specific reset cause and glow
the led based on the reset cause.

So, let's separate the reset cause code from cpuinfo, and
add a check to build it for rk3399, rk3288 since these two
soc are supporting reset cause as of now.

Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
88132e0a28 rockchip: Don't clear the reset status reg
reset reason can be used several stages of U-Boot bootloader
like SPL, U-Boot proper based on the requirements.

Clearing the status register end of get_reset_cause will end
up showing the wrong reset cause when it read the second time.
For example, if board resets, SPL reads the reset status as
RST whereas U-Boot proper reads the status as POR.

However, based on the latest testing clearing reset status
won't be required for determine the last reset cause or
following resets.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Kever Yang
b24405f39b rockchip: tpl: Remove board_early_init_f()
There is no need for board_early_init_f() in TPL, anything like this
should goes to SPL.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
500d1e7749 rockchip: rk3399: Add weak led_setup()
Add weak led_setup() so that board which has an uncommon
led setup code that can make use of custom implementation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
eab5c50a3b rockchip: rk3288: Add OF board setup
The new rk3288 revision rk3288w has some changes with respect
to legacy rk3288 like hclk_vio in cru and usb host0 ohci.

Linux clock driver already handle this via rockchip,rk3288w-cru
compatible.

USB ohci host can enable via dts for rk3288w based boards.

So, add fdt board setup code to update cru compatible with
rk3288w-cru compatible if the SOC revision is RK3288W.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
c60d1c4e17 rockchip: Add rk3288 SoC detection helper
Rockchip SoC's has a new revision chip for rk3288 SoCs.

RK3288 has a new revision chip called RK3288W which is similar
but different hclk_vio clock and fixed OHCI host.

Add common Rockchip SoC detection helper to support this rk3288w
detection.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
1f1395405f arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C.

So, add or enable difference nodes/properties in 4C dts
by including common dtsi.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Jagan Teki
8d7192cb7f arm64: dts: rockchip: Add ROCKPi 4A/4B support
Rock PI 4 has 3 variants of hardware platforms called
RockPI 4A, 4B, and 4C.

- Rock PI 4A has no Wif/BT.
- Rock PI 4B has AP6256 Wifi/BT, PoE.
- Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enable
  GPIO pin change compared to 4B, 4C

So move common nodes, properties into dtsi file and include
on respective variant dts files.

Use 4B dts into default rock-pi-4 defconfig until we find any
solution for dynamic detection of these variants.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:55:13 +08:00
Alex Bee
90f740a06a rockchip: sdram: fix dram_init_banksize
Currently 2.5 GB is calculated as DRAM size for a 1 GB RK322x board
if CONFIG_SPL_OPTEE is set. This is troublesome when booting a
linux kernel since this size will be injected in FDT of the kernel.

gd->bd->bi_dram[0].start (which is basically CONFIG_SYS_SDRAM_BASE)
must not be taken into consideration for calculation of second bank
size, since this offset is already included in calculation of "top".

After applying this patch 992 MB (1024 MB - 32 MB reserved for
optee-os) is correctly calculated and has also been verified on
2 GB boards.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:22:52 +08:00
Kever Yang
b32858ca51 rockchip: ram: fix debug funcfion define when RAM_ROCKCHIP_DEBUG not set
The empty function define should not be in the header file, or else the
build will error with function multi definition after CONFIG_RAM_ROCKCHIP_DEBUG
is disabled.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:22:33 +08:00
Johannes Krottmayer
61b229e24c ARM: dts: rk3328-rock64: Add SPI Flash support
Add U-Boot SPI Flash support for the PINE64 Rock64 board

Signed-off-by: Johannes Krottmayer <krjdev@gmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:22:16 +08:00
Johannes Krottmayer
b5716c1325 ARM: dts: rk3328: Add SPI support
Add U-Boot SPI support for the RK3328

Signed-off-by: Johannes Krottmayer <krjdev@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(fix checkpatch error for code ident)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:22:07 +08:00
Heiko Stuebner
02ce99ec91 rockchip: board: add Hardkernel Odroid Go2 board
Also known as Odroid Go Advance but named Go2 internally by the
vendor it seems.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:21:23 +08:00
Heiko Stuebner
b75f01a918 rockchip: px30: sync Odroid Go Advance devicetree from Linux
Get the devicetree from mainline Linux and include it for U-Boot uses.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:21:08 +08:00
Heiko Stuebner
014fbd7d36 rockchip: px30: sync the main rk3326 dtsi from mainline
The rk3326 is just a trimmed down px30 from a software perspective,
so the mainline rk3326 dtsi also ist just a tiny addition.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22 20:21:01 +08:00
Masahiro Yamada
60e7fa8b3b treewide: convert devfdt_get_addr() to dev_read_addr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20 11:37:47 -06:00
Dave Gerlach
469f04e882 arm: mach-k3: Use SOC driver for device identification
Make use of UCLASS_SOC to find device family and revision for
print_cpuinfo.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Dave Gerlach
a1631d51ad arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3
SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Dave Gerlach
30402cadb3 arm: dts: k3-am65-wakeup: Introduce chipid node
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3
SoCs.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Dave Gerlach
fbde39f417 test: Add tests for SOC uclass
Add a sandbox SOC driver, and some tests for the SOC uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20 11:37:47 -06:00
Simon Glass
f07e58b878 cpu: Convert the methods to use a const udevice *
These functions should not modify the device. Convert them to const so
that callers don't need to cast if they have a const udevice *.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-20 11:37:47 -06:00
Simon Glass
c6efee5031 x86: mp: Add more comments to the module
Add a description of how this module works and also some missing function
comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:48 +08:00
Simon Glass
8dda2baa97 x86: mtrr: Add support for writing to MTRRs on any CPU
To enable support for the 'mtrr' command, add a way to perform MTRR
operations on selected CPUs.

This works by setting up a little 'operation' structure and sending it
around the CPUs for action.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-20 09:46:47 +08:00
Simon Glass
aa3a4d870e x86: mtrr: Update MTRRs on all CPUs
When the boot CPU MTRRs are updated, perform the same update on all other
CPUs so they are kept in sync.

This avoids kernel warnings about mismatched MTRRs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:47 +08:00
Simon Glass
3d734b59c7 x86: Don't enable SMP in SPL
SMP should be set up in U-Boot where possible, not SPL. Disable it in SPL.
For 64-bit U-Boot we should find a way to allow SMP operations in U-Boot,
but this is somewhat more complicated. For now that is disabled too.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-20 09:46:46 +08:00
Simon Glass
240752c612 x86: mtrr: Use MP calls to list the MTRRs
Update the mtrr command to use mp_run_on_cpus() to obtain its information.
Since the selected CPU is the boot CPU this does not change the result,
but it sets the stage for supporting other CPUs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:46 +08:00
Simon Glass
0538d6833c x86: mp: Add iterators for CPUs
It is convenient to iterate through the CPUs performing work on each one
and processing the result. Add a few iterator functions which handle this.
These can be used by any client code. It can call mp_run_on_cpus() on
each CPU that is returned, handling them one at a time.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:46 +08:00
Simon Glass
99a573fb32 x86: mp: Park CPUs before running the OS
With the new MP features the CPUs are no-longer parked when the OS is run.
Fix this by calling a special function to park them, just before the OS is
started.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:46 +08:00
Simon Glass
84d3ed125a x86: mp: Allow running functions on multiple CPUs
Add a way to run a function on a selection of CPUs. This supports either
a single CPU, all CPUs, just the main CPU or just the 'APs', in Intel
terminology.

It works by writing into a mailbox and then waiting for the CPUs to notice
it, take action and indicate they are done.

When SMP is not yet enabled, this just calls the function on the main CPU.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:45 +08:00
Simon Glass
db3a37c711 x86: Set the SMP flag when MP init is complete
Set this flag so we can track when it is safe to use CPUs other than the
main one.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-20 09:46:45 +08:00