The eth_phy_reset() is not used outside of this file, staticize it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
This patch adds 4-byte address mode support. Because traditional access
based on FIFO/shift register, it's complex to specify information like
opcode, address length, dummy bytes etc to flash. Replace the traditional
access by spi-mem layer which is essential to make 4-byte address mode
support possible.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Support RPC SPI on R-Car Gen4 R8A779F0 S4 and R8A779G0 V4H SoCs.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Squash S4 and V4H patches, fix brackets around STRTIM2]
Enable support for parsing and auto discovery of parameters for
SPI NOR flashes using Serial Flash Discoverable Parameters (SFDP)
tables as per JESD216 standard.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Make SFDP the default unconditionally
Move strobe delay setting code into extra function and reflect the latest
setting in datasheet (R-Car Gen3 v2.20, R-Car V3U v0.50).
i.e. STRTIM[2:0] should be set to 110 (RCar M3-W) or 111 (Other products)
This is also a preparation for new R-Car Gen4 SoC which has 4-bits STRTIM
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Fix for RZ/A1
Two sets of FWU updates from Jassi Brar. First:
The patchset reduces ~400 lines of code, while keeping the functionality same and making
meta-data operations much faster (by using cached structures).
Issue:
meta-data copies (primary and secondary) are being handled by the
backend/storage layer instead of the common core in fwu.c (as also noted by
Ilias) that is, gpt_blk.c manages meta-data and similarly raw_mtd.c will have
to do the same when it arrives. The code could by make smaller, cleaner and
optimised.
Basic idea:
Introduce .read_mdata() and .write_mdata() in fwu_mdata_ops that simply
read/write meta-data copy. The core code takes care of integrity and redundancy
of the meta-data, as a result we can get rid of every other callback
.get_mdata() .update_mdata() .get_mdata_part_num() .read_mdata_partition()
.write_mdata_partition() and the corresponding wrapper functions thereby making
the code 100s of LOC smaller.
Get rid of fwu_check_mdata_validity() and fwu_mdata_check() which expected
underlying layer to manage and verify mdata copies.
Implement fwu_get_verified_mdata(struct fwu_mdata *mdata) public function that
reads, verifies and, if needed, fixes the meta-data copies.
Verified copy of meta-data is now cached as 'g_mdata' in fwu.c, which avoids
multiple low-level expensive read and parse calls.
gpt meta-data partition numbers are now cached in gpt_blk.c, so that we don't
have to do expensive part_get_info() and uid ops.
And second:
Introduce support for mtd backed storage for FWU feature and enable it on
Synquacer platform based DeveloperBox.
Just like fwu_plat_get_update_index, provide a default/weak
implementation of fwu_plat_get_bootidx. So that most platforms
wouldn't have to re-implement the likely case.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Towards enabling FWU and supporting new firmware layout in NOR flash,
make u-boot PIC and adjust uboot env offset in flash.
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add 'mkfwumdata' tool to generate FWU metadata image for the meta-data
partition to be used in A/B Update imeplementation.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
region. Add a driver for reading from and writing to the metadata
when the updatable images and the metadata are stored on a raw
MTD region.
The code is divided into core under drivers/fwu-mdata/ and some helper
functions clubbed together under lib/fwu_updates/
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
fwu_get_mdata() no more requires 'dev' argument and
fwu_check_mdata_validity() has been rendered useless and dropped.
Fix the test cases to work with aforementioned changes.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The common code can now read, verify and fix meta-data copies
while exposing one consistent structure to users.
Only the .read_mdata() and .write_mdata() callbacks of fwu_mdata_ops
are needed. Get rid of .get_mdata() .update_mdata() .get_mdata_part_num()
.read_mdata_partition() and .write_mdata_partition() and also the
corresponding wrapper functions.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Instead of each i/f having to implement their own meta-data verification
and storage, move the logic in common code. This simplifies the i/f code
much simpler and compact.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Use cached values and avoid parsing and scanning through partitions
everytime for meta-data partitions because they can't change after bootup.
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Any requirement of FWU should not require changes to bindings
of other subsystems. For example, for mtd-backed storage we
can do without requiring 'fixed-partitions' children to also
carry 'uuid', a property which is non-standard and not in the
bindings.
There exists no code yet, so we can change the fwu-mtd bindings
to contain all properties within the fwu-mdata node.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Add board code for the R8A77980 V3HSK board.
Add CPLD sysreset driver to the R-Car V3H SK board.
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3H Condor, squash CPLD driver in]
Import R8A77980 V3HSK DTs from Linux 6.1.31,
commit d2869ace6eeb ("Linux 6.1.31").
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Sync with 6.1.31
Add board code for the R8A77970 V3MSK board.
Add CPLD sysreset driver to the R-Car V3M SK board.
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Sync configs and board code with V3M Eagle, squash CPLD driver in]
Import R8A77970 V3MSK DTs from Linux 6.1.31,
commit d2869ace6eeb ("Linux 6.1.31").
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Sync with 6.1.31
Introduce weak default board_init() in rcar-common/common.c , which
allows complete removal of ebisu.c and condor.c at the same time .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The eagle.h is now empty and only includes rcar-gen3-common.h .
Use rcar-gen3-common.h directly instead and drop eagle.h .
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Pull common board initialization code from V3M Eagle board
into rcar-common/v3-common.c so it can be re-used by other
V3M/V3H boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
There is no need to pull in all those headers as the board file is
basically empty. Drop them all.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
There is no need to pull in all those headers as the board file is
basically empty. Drop them all.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The reset_cpu() implementation is basically the same across Gen3
SoCs and identical across Gen4 SoCs. Introduce weak default for
reset_cpu(), so that it does not have to be duplicated in every
board file again.
There is a slight difference for CA53 only systems, like E3 and D3,
which now check MIDR for CPU ID first just like the other systems,
but this is OK since the MIDR always returns CA53 core type and the
correct reset register is written.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both
PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array.
The latter are correct, hence remove the former.
Without this fix, the Ethernet PHY is not operational on the MDIO bus.
Ported from Linux kernel commit a145c9a8674ac8fbfa1595276e1b6cbfc5139038 .
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Fixes: 741a7370fc3b8b54 ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6fd217b71e83ba9a8157513ed671a1fa218b23b6.1674824958.git.geert+renesas@glider.be
---
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hai Pham <hai.pham.ud@renesas.com>
Cc: LUU HOAI <hoai.luu.ub@renesas.com>
Cc: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add support to identify R8A77995 r1.1 SoC.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
[Marek: Slight update to commit message, spell out the SoC model]
r8a7796 cpu revision v1.2 has the same information as revision v1.1.
This patch fixes revision display at startup to "rev 1.1/1.2".
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
[Marek: Slight update to commit message, spell out the SoC model]
This is a remnant from when the USB controller driver managed
the reset signal itself. A patch from the very end of 2018 changed
this driver to delegate reset (and clock) management to the proper
control unit driver, but left this unused define behind.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
UEFI:
* Support for firmware versions in capsule updates
-----BEGIN PGP SIGNATURE-----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=Y2Kt
-----END PGP SIGNATURE-----
Merge tag 'efi-next-20230608' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20230608
UEFI:
* Support for firmware versions in capsule updates
This test covers the FMP versioning for both raw and FIT image,
and both signed and non-signed capsule update.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Current efi capsule python tests have much code duplication.
This commit creates the common function
in test/py/tests/test_efi_capsule/capsule_common.py,
aim to reduce the code size and improve maintainability.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This commit describe the procedure to configure lowest supported
version in the device tree for anti-rollback protection.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Current mkeficapsule tool does not provide firmware
version management. EDK II reference implementation inserts
the FMP Payload Header right before the payload.
It coutains the fw_version and lowest supported version.
This commit adds a new parameters required to generate
the FMP Payload Header for mkeficapsule tool.
'-v' indicates the firmware version.
When mkeficapsule tool is invoked without '-v' option,
FMP Payload Header is not inserted, the behavior is same as
current implementation.
The lowest supported version included in the FMP Payload Header
is not used, the value stored in the device tree is used instead.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The FMP Payload Header which EDK II capsule generation scripts
insert has a firmware version.
This commit reads the lowest supported version stored in the
device tree, then check if the firmware version in FMP payload header
of the ongoing capsule is equal or greater than the
lowest supported version. If the firmware version is lower than
lowest supported version, capsule update will not be performed.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
This commit gets the lowest supported version from device tree,
then fills the lowest supported version in FMP->GetImageInfo().
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Current FMP->GetImageInfo() always return 0 for the firmware
version, user can not identify which firmware version is currently
running through the EFI interface.
This commit reads the "FmpStateXXXX" EFI variable, then fills the
firmware version in FMP->GetImageInfo().
Now FMP->GetImageInfo() and ESRT have the meaningful version number.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Firmware version management is not implemented in the current
FMP protocol.
EDK II reference implementation capsule generation script inserts
the FMP Payload Header right before the payload, FMP Payload Header
contains the firmware version and lowest supported version.
This commit utilizes the FMP Payload Header, reads the header and
stores the firmware version into "FmpStateXXXX" EFI non-volatile variable.
XXXX indicates the image index, since FMP protocol handles multiple
image indexes.
Note that lowest supported version included in the FMP Payload Header
is not used. If the platform uses file-based EFI variable storage,
it can be tampered. The file-based EFI variable storage is not the
right place to store the lowest supported version for anti-rollback
protection.
This change is compatible with the existing FMP implementation.
This change does not mandate the FMP Payload Header.
If no FMP Payload Header is found in the capsule file, fw_version,
lowest supported version, last attempt version and last attempt
status is 0 and this is the same behavior as existing FMP
implementation.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
The number of image array entries global variable is required
to support EFI capsule update. This information is exposed as a
num_image_type_guids variable, but this information
should be included in the efi_capsule_update_info structure.
This commit adds the num_images member in the
efi_capsule_update_info structure. All board files supporting
EFI capsule update are updated.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
A small late pull request for Allwinner. The main feature is just a DT
update, matching the v6.4 Linux kernel DT files. This also enables a
board (LCTech Pi F1C200s) which got its .dts file merged into Linux.
Plus a tiny typo fix from Sam.
Gitlab CI passed, briefly tested on an H616 board and the new LCTech Pi.
The Lctech Pi F1C200s (also previously known under the Cherry Pi brand)
is a small development board with the Allwinner F1C200s SoC. This is the
same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM.
Add a defconfig for this board, enabling the most basic features. This
uses the new 64MB memory map, which avoids the very tight memory map we
use for the 32MB F1C100s board(s).
The devicetree file is already in the tree, courtesy of the previous
Linux repo sync.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
