Commit graph

9 commits

Author SHA1 Message Date
Hannes Petermaier
750461887e board/BuR/common: remove unused function 'blink'
since we have possibility to write out on lcd whats going on, we don't need
the gpio blink functionality anymore.

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-28 12:07:44 -04:00
Hannes Petermaier
2b5b2be5e9 board/BuR/common: move I2C initialization from common part to board-specific
At this time I2C and responsible pin-mux is setup during PMIC initialziation
within common.c, this is possible because today PMIC is always connected on
I2C0.

In Future this will be changed, PMIC isn't anymore connected to bus0 in call
cases.

So we do following:
- rename enable_i2c_pin_mux0 to enable_i2c_pin_mux to be generic for enabling
  pin-mux on different or more busses.
- move the call to i2c_pin_mux and i2c_init from common.c to the specific
  board.c

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-28 12:07:44 -04:00
Hannes Petermaier
e52e9cc77f board/BuR/common: use SYS_CONSOLE_OVERWRITE
We don't want that CONSOLE is redirected to LCD upon init, we rather prefer
that console is still on the serial line.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-17 10:55:07 -04:00
Hannes Petermaier
d301425fbf board/BuR/common: try to setup cpsw mac-address from the devicetree
since we have a dtb blob programmed on the board we try to setup the cpsw
interface with the programmed mac.
If this method fails, we fall back to the device-fuses.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:17 -05:00
Hannes Petermaier
fbd5aeda48 board/BuR/common: Take usage of am335x LCD-Display
a summary screen to the lcd.
Values are taken from environment and or devicetree blob.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-05 20:13:16 -05:00
Hannes Petermaier
46c8ebc8cd Add board_mmc_init(...) function for init mmc1 only
Since B&R boards uses only MMC-Controller #1, it only
wastes time if we initialize #0 first to see that there is nothing.

Cc: <trini@ti.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-05-23 11:15:53 +03:00
Hannes Petermaier
4b75fd5100 board/BuR/common: fix phy addresses
B&R boards are using Phy Addresses 'one' and 'two', prior this was
defined through #define PHYADDR 1 within a header file.
Now this is addresses are given with device-driver structure.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-03-06 10:43:50 -05:00
Mugunthan V N
9c653aad16 drivers: net: cpsw: add support to have phy address from cpsw platform data
Some platforms like AM437x have different EVMs with different phy addresses,
so this patch adds support for passing phy address via cpsw plaform data.
Also renamed phy_id to phy_addr so better understanding of the code.

Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
[trini: Update BuR am335x_igep0033 pcm051_rev3 pcm051_rev1 cm_t335
pengwyn boards]
Signed-off-by: Tom Rini <trini@ti.com>
2014-03-04 09:41:53 -05:00
Hannes Petermaier
893c04e17c board: Add support for B&R T-Series Motherboard
Adds support for Bernecker & Rainer Industrieelektronik GmbH T-Series
Motherboard, using TI's AM3352 SoC.

Most of code is derived from TI's AM335x_EVM

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-02-21 13:55:40 -05:00