Commit graph

18 commits

Author SHA1 Message Date
Albert ARIBAUD
412665b461 Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2013-03-26 09:51:09 +01:00
Łukasz Majewski
ce0c1bc135 mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
This patch changes sdhci_init()'s behavior to NOT enable all interrupt
sources by default. Moreover interrupt signaling has been disabled.

This patch do not enable interrupts which aren't served in u-boot
(they are defined at sdhci.h but NOT used elsewhere):
- SDHCI_INT_CARD_INSERT, SDHCI_INT_CARD_REMOVE, SDHCI_BUS_POWER,
  SDHCI_INT_CARD_REMOVE, SDHCI_INT_CARD_INT

Special care shall be put on SDHCI_INT_CARD_INT, which indicates
interrupt generated by SD card.
According to "SD Host Controller Simplified Spec. ver 3.00" when bit 8
(Card Interrupt Status Enable) at "Normal Interrupt Status Enable
Register" (offset 0x34) is set, the card interrupt detection is started.
Then eMMC card may cause the SD controller to set this bit and then this
interrupt is passed to booted OS and might cause kernel crash.

To sum up:
- Only enable interrupts, which are served at u-boot
- This cleanup as a side effect fixes SDHCI's CARD INTERRUPT problem at
  Linux kernel (versions 3.6+, sdhci controller)
- Keep masked bits at "Normal Interrupt Signal Enable Register" (0x38h)

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Andy Fleming <afleming@freescale.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-12 19:50:49 +09:00
Nikita Kiryanov
d23d8d7e06 mmc: add support for write protection
Add generic mmc write protection functionality.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2013-03-08 16:41:13 -05:00
Mela Custodio
688c2d140b mmc: add no simultaenous power and vdd
Bring in the code from Linux kernel.

Added to Linux kernel by:
commit e08c1694d9e2138204f2b79b73f0f159074ce2f5
Author: Andres Salomon <dilinger@queued.net>
Date:   Fri Jul 4 10:00:03 2008 -0700

Some HW balks when writing both voltage setting and power up at the same
time to SDHCI_POWER_CONTROL register.

Signed-off-by: Rommel G Custodio <sessyargc@gmail.com>
CC: Andy Fleming <afleming@freescale.com>

v2: fix attribution and SOB
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-27 17:26:48 -06:00
Tushar Behera
13243f2eaf mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
MMC host controller requires a delay between every sdhci_send_cmd()
execution. In s5p_mmc driver (s5p_sdhci replaces this driver), a delay
of 1000us was provided after every mmc_send_cmd() call. Adding a quirk
in current sdhci driver to replicate the behaviour.

Without this delay, MMC initialization on Origen board fails with
following error messages.

Timeout for status update!
mmc fail to send stop cmd

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 02:53:36 -05:00
Jaehoon Chung
804c7f4221 mmc: sdhci: add the DMA select for SDMA
In host-control register, DMA select bit field is present.
BUt in sdhci.c, didn't select for DMA.
if set CONFIG_MMC_SDMA, we need to set SDMA-select bit.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 02:53:36 -05:00
Jaehoon Chung
5d48e42247 mmc: sdhci: increase the timeout value for data transfer
Timeout value is tunable.
When run read/write operation, sometime returned the timeout error.
Because the timeout value is too short.
So increased the enough timeout value.
(This timeout value is used to prevent the infinite loop.)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 02:53:36 -05:00
Jaehoon Chung
b09ed6e4fe mmc: s5p_sdhci: add the set_mmc_clk for cmu control
Samsung SoC use the cmu control to set clock.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-05 17:33:26 -05:00
Joe Hershberger
470dcc7511 mmc: Add a SDHCI quirk for boards that have no CD
Some boards have no Card Detect wired.  In that case, set the CD test
bits in the standard interface.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-05 17:33:25 -05:00
Joe Hershberger
073cfd1c04 mmc: Fix version check for clock API in sdhci driver
When setting up the clocks in the sdhci driver, the "spec version"
must be masked off.  Otherwise any time the vendor version is not 0,
the check will allways assume the interface is version 3.  This breaks
when the interface is actually version 1 or 2.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-09-05 17:33:25 -05:00
Jaehoon Chung
236bfecff8 mmc: add the quirk to use the sdhci for samsung-soc
To support the Samsung-SoC, added the basically functions.
Samsung-SoC didn't used the SDHCI_CTRL_HISPD.
And added set_control_reg callback for s3c64xx.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Lei Wen<leiwen@marvell.com>
2012-05-08 18:02:22 -05:00
Jaehoon Chung
3a6383207b mmc: sdhci: add the quirk for broken r1b response
When response type is R1b, mask value is added the SDHCI_INT_DAT_END.
but in while(), didn't check that flag.
So sdhci controller didn't work fine.
CMD6 didn't always complete.

So add the quirks for broken r1b response
and add the timeout value to prevent the infinite loop.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Lei Wen<leiwen@marvell.com>
2012-05-08 18:02:22 -05:00
Thierry Reding
48972d907a mmc: Implement card detection.
Check for card detect each time an MMC/SD device is initialized. If card
detection is not implemented, this code behaves as before and continues
assuming a card is present. If no card is detected, has_init is reset
for the MMC/SD device (to force initialization next time) and an error
is returned.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Jason Liu <jason.hui@linaro.org>
2012-01-08 21:28:27 -06:00
Lei Wen
3e81c77240 mmc: sdhci: fix sdma bug for large file transfer
SDHCI spec need to reset the sdma base address while the software
try to accorss the 512k bytes address boundary. When meet such
accross behavior, sdhci controller would generate a interrupt
automatically, and software need handle this.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-11-03 02:15:00 -05:00
Lei Wen
a004abde88 mmc: sdhci: add timeout for data transfer
Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-11-03 02:14:59 -05:00
Lei Wen
6cf1b17cd0 mmc: sdhci: add mmc structure for host
So that sdhci host would tell in the driver that the mmc current
attributes.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-11-03 02:14:59 -05:00
Lei Wen
2c2ec4c969 mmc: sdhci: fix cache flush
Only flush the memory range needed.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-11-03 02:14:59 -05:00
Lei Wen
af62a55785 MMC: add sdhci generic framework
Nowdays, there are plenty of mmc driver in uboot adopt the sd standard
host design, aka as sdhci. It is better to centralize the common logic
together to better maintenance.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2011-07-15 20:29:18 -05:00