Each board has its own way of creating this table. Rather than calling the
acpi_create_fadt() function for each one from a common acpi_write_fadt()
function, just move the writer into the board-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move this table over to use a writer function, moving the code from the
x86 implementation.
Add a pointer to the DSDT in struct acpi_ctx so we can reference it later.
Disable this table for sandbox since we don't actually compile real ASL
code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move this table over to use a writer function, moving the code from the
x86 implementation.
Add a pointer to the DSDT in struct acpi_ctx so we can reference it later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the new ACPI writer to write the base tables at the start of the area,
moving this code from the x86 implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the new ACPI writer to write the ACPI tables. At present this is all
done in one monolithic function. Future work will split this out.
Unfortunately the QFW write_acpi_tables() function conflicts with the
'writer' version, so disable that for sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present acpi_setup_base_tables() both sets up the ACPI context and
writes out the base tables.
We want to use an ACPI writer to write the base tables, so split this
function into two, with acpi_setup_ctx() doing the context set, and
acpi_setup_base_tables() just doing the base tables.
Disable the writer's write_acpi_tables() function for now, to avoid
build errors. It is enabled in a following patch.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present we call lots of functions to generate the required ACPI tables.
It would be better to standardise these functions and allow them to be
automatically collected and used when needed.
Add a linker list to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to record the start of an ACPI table so that offsets from
that point can be easily calculated.
Add this to the context and set it before calling the writer method.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some .asl files include others using the iasl 'include' directive. This
needs to be able to find the files referenced.
For an out-of-tree build the source directory is not the current
directory. Moreover, U-Boot preprocesses the input file and puts the
result in the output directory. So iasl does not know where the real
source file came from.
Add a -I option to produce the correct behaviour. We could add an option
to not preprocess the .asl source, but for now that seems unnecessary.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than keying everything off ACPIGEN, use the main
GENERATE_ACPI_TABLE option to determine whether the core ACPI code
is included. Make sure these option are not enabled in SPL/TPL since we
never generate tables there.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current EFI implementation confuses pointers and addresses. Normally
we can get away with this but in the case of sandbox it causes failures.
Despite the fact that efi_allocate_pages() returns a u64, it is actually
a pointer, not an address. Add special handling to avoid a crash when
running 'bootefi hello'.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present this option is missing a header file, a function prototype and
the qfw driver needs a header included.
Fix these problems so we can enable this option on sandbox. This will
increase the build coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is enabled for quite a few boards which don't create ACPI tables.
Tidy this up by dropping the option for some boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some ARM boards are using ACPI now. It seems that U-Boot should support
this method. Add ARM to the list of archs which can generate ACPI tables.
Signed-off-by: Simon Glass <sjg@chromium.org>
Allow this to be used on any arch. Also convert to using macros so that
we can check the CONFIG option in C code.
Signed-off-by: Simon Glass <sjg@chromium.org>
These have sadly found their way to ARM now. Allow any arch to support
generating ACPI tables.
Disable this for the tools build.
Signed-off-by: Simon Glass <sjg@chromium.org>
- A number of cleanups to Python code based on running pylint
- Integrate changes so that we can run "make pylint" and compare the
results to a current baseline. Keep this as a manual check for now.
- Improve functionality of moveconfig.py
- pci: iproc: Set all 24 bits of PCI class code
There are over 200 errors in this file. Fix some of them, starting at the
beginning of the file. Future work can continue this effort.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present there is quite a bit of ad-hoc code reading from files. The
most common case is to read the file as lines. Put it in a function and
set the unicode encoding correctly.
Avoid writing back to a file when there are obviously no changes as this
speeds things up slightly.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present there is quite a bit of ad-hoc code writing to files. The
treatment of newlines is different in some of them. Put it in a function
and set the unicode encoding correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Python 2 is not supported anymore and Python 3 has had subprocess.DEVNULL
since version 3.3 which was released in 2012. Drop the unnecessary check.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This is a newer library and is now preferred for Python scripts. Update
the code to use it instead of optparse
Use 'args' instead of 'options' throughout, since this is the term used
in that module. Also it helps to avoid confusion with CONFIG options, a
term that is used in this file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Quite a few places use double quotes. Fix this to be consistent with
other Python code in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
It is useful to be able to find out which boards define a particular
option, or combination of options. This is not as easy as grepping the
defconfig files since many options are implied by others.
Add a -f option to the moveconfig tool to permit this. Update the
documentation to cover this, including a better title for the doc page.
Signed-off-by: Simon Glass <sjg@chromium.org>
This doesn't work anymore, since the Kconfig update. The script has no
tests so we did not notice. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
* assert does not need parentheses
* add module docstring
* fix misspelled constant True
* limit lines to 100 characters
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
At present the Python code in U-Boot is somewhat inconsistent, with some
files passing pylint quite cleanly and others not.
Add a way to track progress on this clean-up, by checking that no module
has got any worse as a result of changes.
This can be used with 'make pylint'.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Re-generate pylint.base]
Add some empty __init__ files for binman, buildman and dtoc so that
pylint is able to recognise these as Python modules and produce more
useful pylint output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Register 0x43c in its low 24 bits contains PCI class code.
Update code to set all 24 bits of PCI class code and not only upper 16 bits
of PCI class code.
Use standard U-Boot macro (PCI_CLASS_BRIDGE_PCI << 8) for constructing all
24-bits of PCI class for PCI bridge Normal decode.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Roman Bacik <roman.bacik@broadcom.com>
- Assorted dumpimage/mkimage fixes, allow setting the signature
algorithm on the command line with mkimage
- Bugfix to the misc uclass, CONFIG_MP / CMD_MP Kconfig logic improved,
updated Xen platform MAINTAINERS entry and fixed vexpress_aemv8a_semi
booting.
Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
commands. Compile cmd/mp.c based on CONFIG_CMD_MP.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The component st_size of struct stat is of type off_t. Depending on the
system printing it using %ld leads to a warning:
tools/mkimage.c:438:54: warning: format '%ld' expects argument of type
'long int', but argument 5 has type
'off_t' {aka 'long long int'} [-Wformat=]
438 | "%s: Bad size: \"%s\" is not valid image: size %ld < %u\n",
| ~~^
| |
| long int
| %lld
When comparing an off_t value to a 32bit integer we should not convert to
uint32_t but to off_t which may be wider.
Reported-by: Milan P. Stanić <mps@arvanta.net>
Fixes: 331f0800f1 ("mkimage: allow -l to work on block devices on Linux")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This permits to prepare FIT image description that do not hard-code the
final choice of the signature algorithm, possibly requiring the user to
patch the sources.
When -o <algo> is specified, this information is used in favor of the
'algo' property in the signature node. Furthermore, that property is set
accordingly when writing the image.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
