Commit graph

4 commits

Author SHA1 Message Date
Tim Harvey
53a2b6bd5d imx8m{m,n}-venice-gw7902: add support for GPY111 phy
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy
due to part availability. Add support for it:
 - increase post-reset time to 300ms per datasheet
 - add tx-delay/rx-delay config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00
Tim Harvey
d5cc234154 arm: dts: imx8m*-venice: add gpio hog support
Add gpio hog support for board-specific gpio lines:
- put hogs in u-boot.dtsi so as to keep the regular dts files
  in sync with the kernel. The hogs will not be put in the kernel
  as that makes them un-usable by userspace as well as
  re-initializes them to dt defaults overriding changes which may
  have been done by bootloader commands.
- specify gpio names and initial config
- enable GPIO_HOG

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
a31de24473 arm64: dts: imx8mm-venice-gw7902: use imx8mm-venice-u-boot.dtsi
Use the common imx8mm-venice-u-boot.dtsi (dtb for the
'DEFAULT_DEVICE_TREE) so that it inherits things like binman.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-10-07 17:45:01 +02:00
Tim Harvey
a8a72c3ce9 board: gateworks: venice: add imx8mm-gw7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC

Do the following to add support for it:
- add dts
- add PMIC config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-08-09 14:46:50 +02:00